electric propulsion continued
DESCRIPTION
Electric Propulsion Continued. Nuclear Rocket Engines. Nuclear Rocket Engines. Nuclear Thermal Rockets : Propellant gets heated by conduction/ convection from fuel. Nuclear Electric Propulsion: Electric power generated by heat engine or thermo-electric effects is used to drive electric - PowerPoint PPT PresentationTRANSCRIPT
EXTROVERT Space Propulsion 14
Electric Propulsion Continued
EXTROVERT Space Propulsion 14
Nuclear Rocket Engines
EXTROVERT Space Propulsion 14Nuclear Rocket Engines
• Nuclear Thermal Rockets : Propellant gets heated by conduction/ convection from fuel.
• Nuclear Electric Propulsion: Electric power generated by heat engine or thermo-electric effects is used to drive electric Propulsion system.
• Specific Impulse more than twice that of chemical - AND • Large-thrust possible because of high thrust/weight ratio.
Shorter mission times:
Proponents point out that for long-duration space missions, this leads to LOWER total radiation exposure per mission. (Less time exposed to the Big Nuclear Furnaces in the Sky)
EXTROVERT Space Propulsion 14
Nuclear Thermal Rockets (NTR)Originally researched by the U.S. Air Force and NASA from the late 1940s to the 1960s, the use of nuclear energy to power a rocket engine has many advantages:
• High thrust (as much as chemical rockets – temperature and pressure limits are similar)
• High Specific Impulse• Multiple re-starts
Disadvantages:
• Heavy (reactor and shielding )• Radiation concerns• Testing / development / political issues
“Thermal” reactor: neutrons slowed down below 1eV, moderator of light elements used. “Fast”: broad spectrum of neutron energy up to 15eV. No moderator.
EXTROVERT Space Propulsion 14
NTR Concept
Neutron Reflector: typically Beryllium shieldPropellant: H2 (high Ue), CH4 (better storage density) etc.
EXTROVERT Space Propulsion 14
Types of Reactors1. NERVA (Nuclear Engine for Rocket Vehicle Applications )
Graphite fuel rods with uranium-carbide fuel particles – coated to protect from hydrogen.
Coolant passes through channels in the rods.
Most fully developed, but low T/W
EXTROVERT Space Propulsion 14
NERVA
EXTROVERT Space Propulsion 14Particle Bed Reactor (PBR)
Particles of uranium-carbide fuel (coated) are packed between two porous cylinders. Hydrogen (or helium) is directly used to cool them. PBRs have a higher fuel density and thus higher T/W. The configuration also allows a higher temperature in the working fluid before the fuel melts – Thus higher specific impulse.
inisjp.tokai.jaeri.go.jp/ ACT95E/11/1104.htm
EXTROVERT Space Propulsion 14
“The technical risks of the PBR include: + Challenges in fabricating the high temperature fuel particles that are the key to this technology -- efforts to date have failed to conclusively demonstrate that fuel particles can withstand the rigors of the reactor operating environment; + The low thermal capacity of the reactor core increases the risk of thermal damage to the core in off-normal conditions, or during reactor cool-down;” lifesci3.arc.nasa.gov/.../thomas/ Adv.prop/advprop.html
EXTROVERT Space Propulsion 14
CERMET-core
• CERMET fuel: Hexagonal fuel elements. Uranium oxide particles imbedded in tungsten / tungsten-rhenium matrix; uranium oxide in molybdenum.
• Advantage: very long life ( > 40 hours). • Uses fast fissioning reactor that does not depend as much on a “moderator”
material to slow down the neutrons in the fission reaction.
• A newer system that still requires development
• Has potential for multiple restarts (very robust fuel elements)
Source: www.ms.ornl.gov/.../ SCG/programs/OTT_HVPSM.html • “Cermets: composite materials made by combining a ceramic and a metallic alloy.”• “Cermets are made by 1) milling together powders of the desired materials, and 2) forming a shape,
and then 3) sintering (heating) those materials together to form dense parts. The sintering process causes the component materials to bond together to form a new material with structural characteristics that are better suited for the intended use than either of the starting materials.”
EXTROVERT Space Propulsion 14
“ 6 - Cermet Reactor ( http://lifesci3.arc.nasa.gov/.../thomas/ Adv.prop/advprop.html )
General Electric (GE) is the leading proponent for the Cermet Reactor, which has been evaluated for SDI(16) and SEI applications.(17) .. advantages : + .. improved thermal conductivity compared to metal oxide fuel elements. + .. extensive fuel test engineering heritage exists from the ANP and 710 programs. + … high retention of fission products in the fuel matrix. .. experimentally demonstrated in the 710 Program, in which most test fuel elements demonstrated fission gas fraction release of less than 10-9, while some fuel elements released fission fragment fractions in the range of 10-5 to 10-4. This should produce less stringent containment and confinement restrictions on Ground Test Facilities. + .. cermet fuel may offer improved swelling behavior, but this remains uncertain.
EXTROVERT Space Propulsion 14
Several issues remain open: - .. lower fuel density relative to metal fuel elements, a potential disadvantage of cermet fuels is large core size, and thus greater core and shielding mass. - In order to improve weldability, Rhenium is a potential Cermet cladding material. “
EXTROVERT Space Propulsion 14
Reactor Comparison: Table 8.2, HumbleNerva Particle-Bed CERMET
Power (MW) 1570 1945 2000
Thrust (N) 334,061 333,617 445,267
Propellant H2 H2 H2
Fuel element Solid rod Porous particle bed
Solid rod
Max temp (K) 2361 3200 2507
Isp (s) 825 971 930
Chamber pressure (Mpa)
3.102 6.893 4.136
Nozzle expansion ratio
100 125 120
Engine mass(Kg) 10138 1705 9091
Total shield mass(Kg)
1590 1590 1590
EXTROVERT Space Propulsion 14
Candidate Working Fluids
Working Fluids: coolant, exhaust gases
As the propellant, we want something that can be easily heated and results in a high Isp. Low molecular weight is preferred, but propellants with higher molecular weight may be used depending on storage volume constraints.
Hydrogen: MW = 2.016Methane: 16.043Carbon dioxide 44.01Water: 18.015
Note: the above offer the possibility of replenishing propellant from extra-terrestrial sites.
EXTROVERT Space Propulsion 14
For a given temperature limit, we can determine the specific heats from equations or tables and find the other quantities
such as : γ, *, ,Fc C Isp
γ = = =− −
.
p p p
univv p p
c c cRc c R cMolWt
= −8314 /( )univR J kmol K
EXTROVERT Space Propulsion 14
NTR Performance Example
Assume a PBR NTR. Hydrogen is heated to 3000K at a total pressure of 60 atm The engine operates in vacuum with e = 200, At = 100 cm2, hCF = 0.97, hC* = 1.0. Find vacuum specific impulse, thrust and mass flow rate of hydrogen.
At 3000K, −⎧ ⎫⎪ ⎪⎡ ⎤= − + =⎨ ⎬⎢ ⎥ ⎡ ⎤⎣ ⎦⎪ ⎪⎩ ⎭ ⎢ ⎥⎣ ⎦
0.751 116556.05 702.74 18.0482.016 100
100
pT kJc
T kgK
EXTROVERT Space Propulsion 14
This gives
γ =1.289
γγ
η γ
γγ
+−
= =
⎛ ⎞⎜ ⎟+⎝ ⎠
*11
* 5287 /
21
c cRTc m s
EXTROVERT Space Propulsion 14
At = 200, γ =1.289, =0
0.000172ePP
( )γγγγ
γ γ γ
−+− ⎛ ⎞ ⎛ ⎞⎛ ⎞ ⎛ ⎞
= − +⎜ ⎟ ⎜ ⎟⎜ ⎟ ⎜ ⎟+ −⎝ ⎠ ⎝ ⎠ ⎝ ⎠ ⎝ ⎠=
112 12 2 1
1 1
1.874
e eF cideal
c c
Fideal
P PcP P
c
EXTROVERT Space Propulsion 14
η= =1.8178F c FF idealc c
= =0
* 979.7secFspv
c cIg
=110,520vacT N
=& 11.5 /pm kg sNot counting any turbine/pump losses (I.e., closed cycle)
EXTROVERT Space Propulsion 14
Reactor Power
The reactor provides the power necessary to heat the propellant to the required temperature. ⎧ ⎫⎪ ⎪= + =⎨ ⎬
⎪ ⎪⎩ ⎭∫& &2
1
T
core p v p p spT
P m h c dT m P
vh Heat of vaporization
spP Specific power required. Depends on propellant initial / final temperatures
CO2
CH4
H260
02000 3500
spP
T
For H2 at 3000K, spP is 48 MW/(kg/s)
=552coreP MW
EXTROVERT Space Propulsion 14
Reactor Mass
From Fig. 8.21 in Humble, (Reactor Mass vs. Reactor Power for differentNTR technologies ) the mass of the reactor is estimated as 500 kg.
EXTROVERT Space Propulsion 14
Reactor Shielding
We also typically provide a “shadow shield” between the reactor and the payload for in-space applications. A typical shield consists of layers ofLithium hydride (LiH2) which is a neutron absorber, Tungsten to shield against gamma rays, Beryllium as a neutron reflector. A typical shield maybe 25cm thick and have a mass-density of 3500 kg/m2 of surface area
Total mass = Reactor + shield + nozzle + turbopumps + core containment vessel
Typical thrust-to-weight ratio of an NTR is from 3 to 10.
EXTROVERT Space Propulsion 14Preliminary Design Decisions
NERVA type core limited to ~ 2360 K temperatureCERMET: 2500KPBR: 3200K
Determine gas properties
Determine Nozzle expansion ratio and Isp.
Sizing the System
Inert-Mass Fraction (when using hydrogen propellant): 0.5 to 0.7
Lack of database of nuclear engines prevents good estimate of inert massfraction: iterate.
From Isp and required thrust, find propellant mass flow rate.
Determine required reactor power to heat propellant to required temperatureat the required flow rate.
EXTROVERT Space Propulsion 14Determine system pressure levels: empirical correlations
NERVA-1 Enhanced NERVA
Particle Bed
CERMET
Chamber Pressure
3.1 MPa 6.9MPa 6.2MPa 4.1MPa
Core pressure drop: % of chamber pressure
38% 10.6% 5% 53.7%
% of reactor head pressure
27.5% 9.6% 4.8% 34.9%
EXTROVERT Space Propulsion 14Prometheus Nuclear Engine: JIMO mission
Jupiter Icy Moons Orbiter: Nuclear electric primary propulsion
Two basic types of technology under consideration: (1) radioisotope-based systems
(2) nuclear fission-based systems.
EXTROVERT Space Propulsion 14RadioIsotope Thermoelectric Generators
Heat from plutonium dioxide and solid-state thermocouples toconvert directly to electricity. Cold outer space is the cold junction.
General Purpose Heat Generator: 250 wattsMultimission Radioisotope Thermoelectric Generator: 100watts, 14+ years
http://spacescience.nasa.gov/missions/MMRTG.pdf
EXTROVERT Space Propulsion 14Stirling Radioisotope Generator
http://spacescience.nasa.gov/missions/Stirling.pdf
Closed cycle Stirling cycle free-piston machine. Heat from GPHG with 600gPlutonium dioxide at 650C. Heat rejected from other end at 80C. Closed-cycleEngine converts heat to reciprocating motion – linear alternator produces 62-65 watts AC – converts to 55w DC.