electric high pressure single/double acting hydraulic · pdf file ·...

REL-1915REL-1915ELECTRIC HIGH PRESSURESINGLE/DOUBLE ACTING

HYDRAULIC PUMPThe REL-1915 portable Electric HighPressure Hydraulic Power Pump. Thisintermittent duty two stage pumping systemfeatures a high pressure piston style pump,complimented by a low pressure pumpfor rapid tool advance. The 5/8 HPuniversal electric motor will operatefrom any 115V AC power supply.

5/8 HP electric motorTwo stage pumping system10,000 PSI high pressure pumpDesigned for use with singleor double-acting remote toolsHigh-pressure relief valveFactory filled oil reservoirHand control with 8‘ cordCarrying handleOptional carrying case

FEATURES:

Electric Motor5/8 HP, 0.47kw, 3,000 RPM115V AC 11 Full Load AMPSElectrical ControlBody mount toggle switch andremovable remote hand controlwith 8 foot twist lock cord.Oil Delivery Per Minute160 cubic inches at 100 PSI30 cubic inches at 10,000 PSIOil Reservoir3 quarts (.75 gallon)

Dimensions8”W x 8”D x 15”HPump Weight W/ Oil35.72 pounds

Consult your RELIABLErepresentative for more

information about our completeline of hydraulic tools.

REL-GB-10REL-GB-10REL-GB-10REL-GB-10REL-GB-10 or REL-EP-115REL-EP-115REL-EP-115REL-EP-115REL-EP-1156 HP GASOLINE or 115V ELECTRICSINGLE & DOUBLE ACTINGHYDRAULIC PUMPSThe REL-GB-10 and REL-EP-115 singleand double acting hydraulic pumps featuremanual lever operation, continuous dutyperformance, and a two stage pumpingsystem, to ensure rapid tool advance.The manual lever control valve, and factoryinstalled couplers are ready to run yoursingle or double acting crimping, cuttingand spearing tools.

REL-EP-115 - 1 hp electric115V continuous duty motor.REL-EP-230 230V model is also available.REL-GB-10 - 6 HP Briggs/Stratton OHV4 stroke gasoline engine.FEATURES:10,000 PSI high pressure pump.Fast, two stage pumping system.Factory filled 2 gallon fluid reservoirwith recessed sight glass.High-pressure relief valve.NO CONVERSION NECESSARYSingle/Double selector knob.Integral manual lever control valve.Designed for use with high pressuresingle & double-acting, hydraulic tools.REL-GB-10 has a steel support frame.REL-EP-115 has a balanced carry handle.

RELIABLE EQUIPMENT & SERVICE CO., INC.92 Steamwhistle Drive • Ivyland, PA 18974Call: 800-966-3530 • FAX: 215-357-9193Visit our web sight: www.Reliable-Equip.com

4

REL-60 SERIES 60 TON HYDRAULIC

COMPRESSION TOOL

FEATURES:� Lightweight� Removable die cap for easy

connector positioning.� 3/8" Screw-type couplers� Tool Stand & Steel Case included

Model REL-60

Output 60 ton @ 10,000 psi

Weight 47 lbs.

Dimensions 5"W x 17"HRam Stroke 1.5" travel

Oil Capacity 303 cc

The REL-60 Series 60 ton press is designedto compress sleeves and lugs on ACSR andACAR transmission and distribution cables.Operable from any 10,000 psi pumping source,these tools are portable for easy positioning.Available in two models: The REL-60SA willbe the perfect compliment to any single actingsystem. The REL-60DA features double actingconvenience to eliminate the possibility ofjamming or hanging up.Accepts most shell type dies currently usedwith Alcoa, and Burndy 60 ton presses.

REL-60SA REL-60DA

CONTACT RELIABLE EQUIPMENT Call: 800-966-3530 Fax: 215-357-9193

4

REL-100SDA100 TON SINGLE/DOUBLE ACTING

HYDRAULIC CRIMPING TOOLThe REL-100SDA 100 ton press has beendesigned to compress sleeves and lugs onACSR and ACAR full tension, transmissionand substation connections.Operable from the REL-1915 electric/hydraulic pump, REL-10-I intensifier, or any3/4 hp, 10,000 psi hydraulic power source withan adequate reservoir.Accepts most 100 ton shell type dies currentlyused with Alcoa, Burndy, and other 100 tonpresses. Double acting feature eliminates thepossibility of jamming or hanging up.

Model REL-100SDAOutput 100 tonWeight 95 lbs.Dimensions 8.25"W x 15"HRam Stroke .98" travelOil Capacity .66 pint

Suspension eye allows usefor aerial operations

Breather valve allowseasy conversion foroperation withsingle actingsystems.

FEATURES:Removable die cap for easyconnector positioning.3/8" Screw-type couplersBreather valve allowsconversion to single actingSuspension eye includedSteel case includedLong Life Expectancy(tested to 50,000 cycles)

92 Steamwhistle Drive • Ivyland, PA 18974Phone: 800-966-3530 • Fax: 215-357-9193

The PDY-1524 Double ActingHydraulic 15 ton Crimping Head.Designed for connectors requiring15 tons of crimping force.Features double-acting hydraulicpower to eliminate die hang-up.Easy, one-hand operation, and a360

O rotating head allow easy toolorientation for precision control ofcrimping cycle to improve safetyand enhance reliability.The PDY-1524 accepts 15 ton “P”style dies to easily crimp connectorsizes up to 1,250 MCM-CU.With an optional PU Adaptor thistool will accept standard Reliable12 ton “U” style dies, as well assome dies from Burndy, Alcoa,Blackburn, and Thomas & Betts.

PDY-1524

Weight: 16 lb.Length: 10.5 in.Width: 6 in.

SPECIFICATIONSSystem Double-ActingJaw Capacity 2"Crimping Force 30,000 lb.Return Force 3,350 lb.Oper. Pressure 10,000 psi (690 bar)Return Pressure 5,000 psi (345 bar)Couplers Direct ConnectDies Accepted Y-46 or EqualW/ PU Adaptor Y-35 or EqualHead Rotation 360O

15 TON - DOUBLE ACTING - DIRECT CONNECTHYDRAULIC COMPRESSION TOOL

Compatible with RELIABLE R15 and “P” Style dies.

REL-46

15 TON SINGLE ACTINGHYDRAULIC CRIMPING TOOL

92 Steamwhistle Drive • Ivyland, PA 18974Phone: 800-966-3530 • Fax: 215-357-9193Visit us on the web at www.Reliable-Equip.com

Weight: 10 lbs.Length: 10.5 inchesWidth: 6 inches

The REL-46 Single Acting Hydraulic 15 tonCrimping Head. Easy, one-hand operation,and 360 O rotating head allows easy headorientation for precision control of crimpingto improve safety and reliability.Accepts R15 and “P” style dies to crimpconnector sizes up to 1,250 MCM-CU.With an optional PU adaptor this tool willaccept Reliable R12 or “U” style dies as wellas some dies from Alcoa, Burndy, Thomas& Betts, and Blackburn.

SPECIFICATIONSSystem Single-Acting

Jaw Capacity 2 inch

Crimping Force 24,300 lb.

Oper. Pressure 10,000 psi (690 bar)

Couplers 3/8 inch Female

Dies Accepted Y-46 or Equal

W/ PU Adaptor Y-35 or Equal

Head Rotation 360O

4

FULL 4 INCHCOPPER AND ALUMINUM

CUTTING CAPACITY

REL-4000SAHYDRAULIC 4 INCH CUTTING TOOLThe REL-4000SA single acting hydraulic cutter has been designed to accommodate copper and aluminum conductor up to 4 inches in diameter.The body and handle have been designed to provide comfort, and to protect the operator from inadvertent contact with the blade or mechanism.The hardened steel blades will provide a clean cut with minimal distortion.

92 Steamwhistle Drive Ivyland, PA 18974Phone: 800-966-3530 Fax: 215-357-9193Visit us on the web at www.Reliable-Equip.com

REL-4000SAHYDRAULIC 4” CUTTING TOOL

SPECIFICATIONSWeight: 17.5 lbs.Size: 15.6” x 10” x 4”System Hydraulic - 10,000 psi max.Max. Cut 4 inch dia. (Cu. or Al.)

DO NOT CUT STEEL

HIGH PRESSURECOUPLER INSTALLED

LIFTINGEYE

The REL-3000SA guillotine-type cutter will makea straight, clean cut every time. These cutters canbe used for cutt ing a wide range of electricalconductors. Head opens easily for inserting cableat any location along line. This Single-acting cutterwill compliment existing single acting systems.The 360 O rotating head eliminates hose twistingand increases operator speed and comfort.

System Single-Acting

Capacity (Jaw Opening) 3.35 inch.

Force @ 10,000 psi (690 bar) 28,048 lb.

Return @ 5,000 psi (345 bar) 10,445 lb.

Max Operating Pressure 10,000 psi (690 bar)

Max Return Pressure 5,000 psi (345 bar)

Couplers Direct Connect

Head opensfor cable insertion

along the line

Weight: 21 lb.Length: 17.5 in.Width: 7.5 in.

3000 SERIES - MAXIMUM3000 SERIES - MAXIMUM3000 SERIES - MAXIMUM3000 SERIES - MAXIMUM3000 SERIES - MAXIMUMCONDUCTCONDUCTCONDUCTCONDUCTCONDUCTOR CAPOR CAPOR CAPOR CAPOR CAPAAAAACITYCITYCITYCITYCITY

Soft Copper Jacket 3”

Aluminum Jacket 3”

Lead Sheathed Cable 3.35”

Communication Cable 3.35”

REL-3000SASINGLE ACTING HYDRAULIC

CUTTING TOOLFEATURES• Lightweight, compact guillotinedesign provides a clean, positive cut.

• Cutting head is easily opened forcable insertion at any location in line.

• 360O head eliminates hose twisting.

• Built-in Auxiliary Handle

This guillotine style cutter features up to a 2 inchcutting capacity, 360O rotating head, and a built-inauxiliary handle.These cutters can be used for cutting cable, wirerope, soft steel bolts, guy strand, ground rods,anchor bolts, and rebar.The PDC-2000 makes a straight, clean cut every time.

System Double-Acting

Capacity (Jaw Opening) 2 inch.

Force @ 10,000 psi (690 bar) 28,048 lb.

Return @ 5,000 psi (345 bar) 10,445 lb.


Max Return Pressure 5,000 psi (345 bar)

Couplers Direct Connect

Head opens for cableinsertion along the line

Weight: 16.5 lb.Length: 17.5 in.Width: 6.5 in.


Soft Copper Jacket 2”

Aluminum Jacket 2”

Lead Sheathed Cable 2”

Communication Cable 2”

ACSR 2”

Wire Rope 1”

Soft Steel Bolts 7/8”

Guy Strand 3/4”

Ground Rod 3/4”

Anchor Bolts 3/4”

Rebar Grade 40 3/4”

2000 SERIES2000 SERIESDOUBLE ACTING HYDRAULIC

CUTTING TOOL

PDC-2000 SHOWNPCU-2000 INCLUDES COUPLERS

4

System Double-Acting

Capacity (Jaw Opening) 2 inch.

Force @ 10,000 psi (690 bar) 28,048 lb.


High Pressure Couplers Female Screw Type

Head opensfor cable insertion

along the line.

Weight: 16.5 lb.Length: 17.5 in.Width: 6.5 in.


Soft Copper Jacket 2”Aluminum Jacket 2”Lead Sheathed Cable 2”Communication Cable 2”ACSR 2”Wire Rope 1”Soft Steel Bolts 7/8”Guy Strand 3/4”Ground Rod 3/4”Anchor Bolts 3/4”Rebar Grade 40 3/4”

REL-2000SADOUBLE ACTING HYDRAULIC

CUTTING TOOL


This guillotine style cutter features up to a2 inch cutting capacity, 360O rotating head,and a built-in auxiliary handle.These cutters can be used for cutting cable,wire rope, soft steel bolts, guy strand, groundrods, anchor bolts, and rebar.The REL-2000SA

REL-58MCMANUAL HYDRAULIC CUTTERAmong the smallest hydraulic cutting toolsavailable. Designed to cut copper, aldrey,aluminum, aluminum-steel cables, EHS guywire and steel ropes having a max overalldiameter of 1” and steel ground rod up to 5/8”.The tool features a double speed action.The blades are manufactured from highstrength special steel, heat treated to ensure along service life.The head can rotate by 180 degrees, to enablethe operator to work in the most comfortableposition, and can easily be opened to allow thecutting of running cables. REL-58MC featuresan automatic safety valve to bypass oil whenreaching maximum pressure; a pressurerelease device can also be operated at anystage of operation.


REL-58MCMANUAL HYDRAULIC

CUTTING TOOL

SPECIFICATIONSLength 15.75 inchesWeight 7.7 lbs.Pressure 10,000 psi (manual)Capacity 1 in. Al., Guy Wire, Steel Rope

5/8 in. Steel Ground Rod

6 TONS OF CUTTING FORCE

4

REL-2000MCMANUAL HYDRAULIC

CUTTING TOOL

CAPACITYCU & AL WIRE 2”

ACSR 2”

LEAD SHEATHED CABLE 2”

SOFT STEEL BOLTS 1-1/4”

WIRE ROPES 1”

REBAR 3/4”

GROUND & ANCHOR ROD 3/4”

STANDARD GUY WIRE* 3/4”

EHS GUY WIRE 5/8”


REL-2000MCMANUAL HYDRAULIC CUTTING TOOL

This guillotine-type cutter will make a straight, cleancut every time. These cutters can be used for cuttinga wide range of electrical conductors. The head openseasily for inserting cable at any location along the line.Designed to cut copper, aluminum, ACSR, guy wire,soft steel bolts, rebar, ground and anchor rod.Two-stage pumping piston for rapid advance, andtwist handle release.Magnetic oil reservoir plug traps metal contaminants.The blades are manufactured from high strengthspecial steel, heat treated to ensure a long service life.The head can rotate by 360 degrees, enabling theoperator to work in the most comfortable position,and can easily be opened to allow the cutting ofrunning cables. REL-2000MC features an automaticsafety valve to bypass oil when reaching maximumpressure; a pressure release device can also beoperated at any stage of operation.

Weight: 18 lbs.Dimensions: 24” X 6” X 4”

REL-1500HREL-3000HMANUALLY LEVER OPERATEDROLLER CHAIN HOIST


These two NEW hoists from RELIABLEpromise to provide years of service, underthe rigorous conditions demanded by thePower Utility & Construction Industry.The durable, malleable iron external frameand lever assembl ies house in terna lcomponents constructed and tested toprovide smooth and safe operation.

FEATURES:The lever action can be reversed simply byreleasing the safety pin and rotating handlefor inverted applications.Safety hooks rotate 360O and feature springlatches to simplify a secure connection atthe support and the load.The thumb latch releases chain for fast easyconnection to the load.Slack may be quickly removed by pulling onthe free end of the chain.Redundant safety measures prevent handlerotation or chain release under load if theoperator were to lose control.The REL-1500H has been manufacturedto handle a 3/4 ton load with ease.The REL-3000H utilizes a multiple chainconfiguration to offer a 1-1/2 ton capacity.The chain lug hook may be detached to providea longer lift capacity and faster operation in3/4 ton applications.

Model REL-1500H REL-3000HCapacity: 1,500 lbs. 3,000 lbs.Travel: 56.5 inches 57 inchesHeadroom: 13 inches 15 inchesHandle: 18.75 inches 18.75 inchesStroke: 27 inches 27 inchesWeight: 18 lbs. 22 lbs.

NEW

Manufacturedto meet or exceed

ASME B30.21.

REL-6000HMANUALLY LEVER OPERATED3 TON ROLLER CHAIN HOIST


The REL-6000H 3 ton hoist from RELIABLE promises to provide years of service, under the rigorous conditions demanded by the Power Utility & Construction Industry.The durable, malleable iron external frame and lever assemblies house internal components constructed and tested to provide smooth and safe operation.

FEATURES:The lever action can be reversed simply by releasing the safety pin and rotating handle for inverted applications.Safety hooks rotate 360O and feature spring latches to simplify a secure connection at the support and the load.The thumb latch releases chain for fast easy connection to the load. Slack may be quickly removed by pulling on the free end of the chain.Redundant safety measures prevent handle rotation or chain release under load if the operator were to lose control. The REL-6000H hoist utilizes a multiple chain confi guration to offer a 3 ton capacity.The chain lug hook may be detached to provide a longer lift capacity and faster operation in 1-1/2 ton applications. Model REL-6000H

Capacity: 6,000 lbs. Travel: 57 inches Headroom: 17 1/2 inches Handle: 27 5/8 inches Stroke: 42 inches Weight: 34 lbs.

Manufacturedto meet or exceed

ASME B30.21.

NEWfor 2011

electric high pressure single/double acting hydraulic · pdf file ·...

Documents