elatech - bradford engineering services ltd

PolyurethaneTiming Belts

Bradford Engineering Services Limited130 Hall Lane, Bradford BD4 7DF

Tel: 01274 309071 Fax: 01274 727286email: [email protected]

ELA-flex SDTM timing belts aremanufactured truly endlessfor power transmission with

a polyurethane body andsteel tension cords. Designedfor power transmission, these

belts have no splices or welding sono weak cross section. They are available in every pitch belt length,

tooth by tooth from a minimum of 900mm to maximum of 20,000mm, therefore one for any situation.The ELA-flexTM range of belts can be specified with special cords including Aramid, HFE, HPL, XHPL orINOX stainless steel. ELA-flexTM belts are available with PAZ and or PAR - low friction coatings and PU

film in various hardness. ELA-flex SD is also available as double sided.

ELA-flex SD

SPECIAL ELATECH® BELTSThe unique chemical and mechanical characteristics ofELATECH® belts make them ideal for all conveyingapplications offering the design engineer endlesspossibilities to make unique designs.

BackingsPAZ / PAR / PUR 85 / PUR 70 / PUR Fishbone /PU Yellow / Celloflex / Supergrip / PVC Blue / PVC White /Linatex / Porol / Correx / Tecnogum / Sylomar / Viton / Linatril,and many more.

Profiles BeltsA vast choice of standard flights are available from stock withspecials made on a daily basis. We can fix flights to ALL of ourbelts using heat, chemical or mechanical fixings, ELATECH®

make your ideas a reality.ELATECH® EMF – Mechanical Fastening System

Following demand for a fixing system suitable for onsite fittingof belts the EMF system of pin jointing belts has beenperfected by ELATECH®.

TM

ElatechiSync Belts

ELATECH® - iSyncTM belts are an innovative highperformance, endless power transmission belt.

Manufactured thermo-plastic resin bodywith steel or Kevlar /Aramid fibre cords.

ELATECH® - iSyncTM belts are manufacturedfrom high performance materialsoffering greater length stability,particularly useful where high

precision is required.

iSyncTM belts transmit up to 30% morepower than conventional T and

AT belts, providing more driven poweror alternatively a narrower drive,

no extra charge and no colour change.

Profile: T2.5Length (mm) 120 145 160 177.5 180 200 210 230 245 265 277.5 285 290 305 317.5 330 342.5 380 420 480 500 540 600 650 780 915 950No of teeth 48 58 64 71 72 80 84 92 98 106 111 114 116 122 127 132 137 152 168 192 200 216 240 260 312 366 380

Profile: T5Length (mm) 165 185 200 215 220 225 245 250 255 260 270 275 280 295 300 305 320 325 330 340 350 355 360 365 375 390 400 410 420 425 430 440 445 450 455 460 475 480 500 510 525No of teeth 33 37 40 43 44 45 49 50 51 52 54 55 56 59 60 61 64 65 66 68 70 71 72 73 75 78 80 82 84 85 86 88 89 90 91 92 95 96 100 102 105Length (mm) 545 550 560 575 590 600 610 620 625 630 640 650 660 675 690 700 720 725 750 780 800 815 830 840 850 860 900 940 990 10001075 1100 1115 1140 1200 1215 1315 1350 1355 1380 1440No of teeth 109 110 112 115 118 120 122 124 125 126 128 130 132 135 138 140 144 145 150 156 160 163 166 168 170 172 180 188 198 200 215 220 223 228 240 243 263 270 271 276 288

Profile: T10Length (mm) 260 320 350 370 400 410 440 450 480 500 530 550 560 600 610 630 630 650 660 690 700 720 750 780 800 810 840 850 880 890 900 910 920 950 960 970 980100010101050 1080 1100 1110No of teeth 26 32 35 37 40 41 44 45 48 50 53 55 56 60 61 63 63 65 66 69 70 72 75 78 80 81 84 85 88 89 90 91 92 95 96 97 98 100 101 105 108 110 111Length (mm) 1140 1150 1200 1210 1240 1250 1300 1320 1350 1390 1400 1420 1440 1450 1460 1500 1560 1600 1610 1700 1750 1780 1800 1880 1960 2250No of teeth 114 115 120 121 124 125 130 132 135 139 140 142 144 145 146 150 156 160 161 170 175 178 180 188 196 225

Profile: AT5Length (mm) 225 255 280 300 340 375 390 420 450 455 500 545 600 610 660 710 720 750 780 825 860 975 1050 1125 1500No of teeth 45 51 56 60 68 75 78 84 90 91 100 109 120 122 132 142 144 150 156 165 172 195 210 225 300

Profile: AT10Length (mm) 500 530 560 580 600 610 660 700 730 780 800 840 880 890 920 960 98010001010 1050108011001150120012101250128013001320135013601400142014801500160017001720180018601940No of teeth 50 53 56 58 60 61 66 70 73 78 80 84 88 89 92 96 98 100 101 105 108 110 115 120 121 125 128 130 132 135 136 140 142 148 150 160 170 172 180 186 194

Profile: LLength (mm) 22.5 24 25.5 27 28.5 30 51 54No of teeth 60 64 68 72 76 80 136 144

Profile: DT5Length (mm) 410 460 590 620 750 815 860 940 1100No of teeth 82 92 118 124 150 163 172 188 220

Profile: DT10Length (mm) 260 530 630 660 720 840 920 980 1210 1240 1250 1320 1350 1420 1610 1880No of teeth 26 53 63 66 72 84 92 98 121 124 125 132 135 142 161 188

TM

Based in Italy ELATECH® are a world leading manufacturer ofPolyurethane timing belts, fast becoming known for the most extensiverange available in the market today. ELATECH® are dedicated to the research, development and manufacture of Polyurethane timing belts forindustrial applications. ELATECH® products are manufactured in Italyand distributed through 5 sister companies on 3 continents. WhereELATECH® are not present directly their products are supplied throughhighly experienced distribution companies such as BES - BradfordEngineering Services Ltd.

ELATECH® manufacture belts for linear motion, conveying and powertransmission applications. The combination of a polyurethane bodyreinforced with special steel tension members, means that the belt fulfilsthe most severe requirements in all industrial applications. They offer thewidest range of tooth profiles available allowing design engineers toselect one best suited to their specific requirements.

www.elatech.comISO 9001:2000

BES – Bradford Engineering Services Ltd – was established in the Northof England in 1989. Originally and still today they work in the bearing,sealing and power transmissions industry and became involved in thePolyurethane belt market in 2000. They offer an unparalleled level ofservice and experience to customers in the UK OEM andDistribution market.

The success and longevity of BES is as a result of two strengths:KNOWLEDGE of the product in the market ensuring you get the rightproduct to your specification.SERVICE - delivering to customers the same day or next day iffurther afield, ensuring down-time is kept to a minimum. No extracharge for doing what is required, they understand if you or yourcustomer is broken down you need to rely on a supplier who will notprofiteer out of you.BES became a supply partner to ELATECH® as they believethey offer an unrivalled product range in the market today.

Contact BES 24 hours a day- Specialists in providing apersonal and efficient service.

Profile: XHWidth Imperial Metric

100” 25.4 150” 38.1 200” 50.8 300” 76.2 400”101.6

Profile: F1Width (mm)

10 20 25 50 75 100


10 15 25 30 50 75 100

Profile: F2.5Width (mm)

20 25 50 75 100 120

ELATECH® M Open End timing belts are manufactured with abody in thermoplastic polyurethane offering excellent wearresistance and with high tension steel cords as standardto provide strength and longevity.

The ELATECH® M range of products can be specifiedwith special cords including Aramid, HFE, HPL, XHPL orINOX stainless steel. The M range of belts are availablewith PAZ and or PAR low friction coatings,PU film in various hardness andthickness also Red APL,Antistatic Black andHerringbone coatingsas standard.

Elatech MOpen end

Profile: T2.5Width (mm)

4 6 10 20 50 100

Profile: T5Width (mm)

10 12 16 20 25 32 50 75 100 150


10 16 20 25 32 50 75 100 150 200


25 32 50 75 100 150

Profile: AT3Width (mm)

10 12 16 20 25 100


10 12 16 20 25 32 50 75 100


10 16 25 32 50 75 100 150

Profile: AT2Width ( 2 3 5 7 1 1 2

Profile: ATK10-K13Width (mm)

25 32 50 75 100 150


25 32 50 75 100

Profile: HTD3MWidth (mm)

10 15 20 25 50 100


10 15 25 50 100


10 15 20 30 50 85 100


40 55 85 100 115 150

Profile: RPP5MWidth (mm)

10 15 25 50 100

Profile: RPP8Width ( 1 1 2 3 5 8 1


25 30 60 120

Profile: T10-TPWidth (mm)

16 20 50 100

Profile: AT10-TPWidth (mm)

25 32 50 100

Profile: HTD8Width ( 2 3 5 1

Profile: ATL5Width (mm)

10 12 16 20 25 32 50 75 100


10 16 25 32 50 75 100 150 200

20 (mm)

25 32 50 75 100 150 200


25 32 50 75 100 150 200

Profile: TK5-K6Width (mm)

16 25 32 50 75 100


16 25 32 50 75 100

8M (mm)

10 15 20 30 50 85 100

Profile: RPP14MWidth (mm)

40 55 85 100 115 150

Profile: STD5MWidth (mm)

10 15 25 50 115 150


10 15 20 30 50 85 100


40 55 85 100 115

Profile: XLWidth Imperial Metric

025” 6.35 037” 9.525 050” 12.7 075” 19.05 100” 24.4 150” 38.1 200” 50.8 400” 101.6

Profile: LWidth Imperial Metric

050” 12.7 075” 19.05 100” 25.4 150” 38.1 200” 50.8 300” 76.2 400” 101.6

8M-TP (mm)

20 30 50 100

Profile: HTD14XHPLWidth (mm)

40 55 85 100 115 150

Profile: RTD14HPWidth (mm)

40 55 75 85 100 115 150

Profile: RTD14XHPLWidth (mm)

40 55 85 100 115 150

Profile: E14Width (mm)

35 52.5 70 105


16 25 32 50 75 100


25 32 50 75 100


25 32 50 75 100 150

Profile: HWidth Imperial Metric

050” 12.7 075”19.05 100” 25.4 150” 38.1 200” 50.8 300” 76.2 400”101.6 600”152.4 800”203.2

Profile: TT5Width (mm)

10


12.5 25


16 25 32 50

elatech - bradford engineering services ltd

Documents