1 12/1/20

Performance-PCs.com

1701 R. J. Conlan Blvd.NE, Unit #5Palm Bay, FL 32905, USA Toll Free: 888-381-8222 www.performance-pcs.comsales@performance-pcs.com

Like Us Facebook

Follow Us Twitter

See Our Instagram

Watch Our YouTube

EK-FC1080 GTX Ti - NickelPlated Copper Water Blockwith Plexi Top for NVIDIA

GeForce GTX 1080 Tigraphics card

$139.99

Product Images

2 12/1/20

Short Description

This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directlyover these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks.

Description

EK-FC1080 GTX Ti is a high-performance full-cover water block for NVIDIA GeForce GTX 1080 Ti graphics card,based on Pascal architecture (GP102). Please check our Cooling Configurator online compatibility system fordetailed compatibility list!

This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directlyover these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks.EK-FC Titan X Pascal water block features a central inlet split-flow cooling engine design for best possiblecooling performance, which also works flawlessly with reversed water flow without adversely affecting thecooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higherboost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, suchdesign offers great hydraulic performance allowing this product to be used in liquid cooling systems using

3 12/1/20

weaker water pumps.

The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylicmaterial. The top also features two pre-drilled slots for 3mm diodes. The sealing is ensured by quality rubberwashers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.

EKWB recommends the purchase of aesthetic retention backplate (EK-FC1080 GTX Ti Backplate - Black, Nickel)which improves the looks of your graphics cards and also provide some passive cooling to the circuit boardVRM section.

G1/4" threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC1080 GTX Ti waterblocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUADtype) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is notcompatible with this water block.

The block also features a special plastic cover over the block Terminal. This add-on is designed to reveal thegraphics card model, visible from the side. The terminal cover is removable, it is fitted with 2 screws from theside. EK also encloses a single-slot I/O bracket which replaces the original two-slot in order to makeinstallation of multiple graphics cards easier and also transforms the GPU into a gorgeous single slot solution.

We recommend EK-Cable PWM Fan Adapter for GPU for connecting your GPU to PWM-enabled fans in yourcustom loop and thus controlling the PWM profiles based on the graphics card temperature.

Specifications

Enclosed:- EK-FC1080 GTX Ti series water block- Mounting mechanism with screw-in brass standoffs- Necessary mounting screws, nuts, and washers- 2x EK plug G1/4”- 6mm Allen key- Thermal pads- Thermal grease EK-TIM Ectotherm (1g)

4 12/1/20

Made in Slovenia - Europe!

PLEASE NOTE:

Due to an immense variety of fittings/barbs available on the market and no prescribed standards, weguarantee compatibility only for connectors bought from our website.NVIDIA® GeForce GTX 1080 Ti factory backplate is not compatible with this water block!New NVIDIA® SLI HB bridges are compatible with this water block.Check your toolbox if you are missing this special Hex adapter for some of the screws.Fittings are just for showcase and are not included!

Additional InfoMaterial / Design / Color option

Nickel Plexi

ThreadsG1/4

Prepared for LED Diode3mm

Chip ManufacturerNvidia GeForce

Additional Information

Brand EK Waterblocks

SKU EK-FC1080-GTX-TI-NP

Weight 3.0000

Color Clear

VGA Series GTX 1080 Ti

Block GPU Type Nvidia

Block Style Nickel-Plexi

Vendor SKU/EAN 3831109831915

5 12/1/20