eincop netwax lab: redistribution
TRANSCRIPT
Lab 7: Redistribution
Task
1. Configure IP Address as per given in topology.
2. Configure OSPF Area's as per given in topology and provide router id as per router number (like
1.1.1.1 for R1) and configure OSPF through interface only in Area 20.
3. Make sure R5 and R6 able to ping R1. (Do possible changes according to you).
4. Configure EIGRP as per given in topology. Make sure EIGRP AS number is 100.
5. Enable RIP as per given in topology. Make sure RIP v2 configure.
6. Basic redistribution between RIP and OSPF. (All subnets will be redistribute)
7. Basic redistribution between OSPF to EIGRP (all subnets will be redistribute and exclude R6 for
Redistribution).
8. All the Loopback will be manual summarize.
After Completion of this task, verify routes and ping all the routers each other.
Lab 7: Redistribution
Solution
Task 2: Configure OSPF Area's as per given in topology and provide router id as per router
number (like 1.1.1.1 for R1) and configure OSPF through interface only in Area 20.
R1
router ospf 1
router-id 1.1.1.1
network 10.0.12.0 0.0.0.255 area 0
network 10.0.13.0 0.0.0.255 area 0
R2
router ospf 1
router-id 2.2.2.2
network 10.0.12.0 0.0.0.255 area 0
network 10.0.24.0 0.0.0.255 area 10
R3
router ospf 1
router-id 3.3.3.3
network 10.0.13.0 0.0.0.255 area 0
network 10.0.34.0 0.0.0.255 area 10
R4
router ospf 1
router-id 4.4.4.4
network 10.0.24.0 0.0.0.255 area 10
network 10.0.34.0 0.0.0.255 area 10
R5
interface Serial0/0
ip ospf 1 area 20
R6
interface Serial0/0
ip ospf 1 area 20
Lab 7: Redistribution
Task 3: Make sure R5 and R6 able to ping R1. (Do possible changes according to you).
R2
router ospf 1
area 10 virtual-link 4.4.4.4
R3
router ospf 1
area 10 virtual-link 4.4.4.4
R4
router ospf 1
area 10 virtual-link 3.3.3.3
area 10 virtual-link 2.2.2.2
Task 4: Configure EIGRP as per given in topology. Make sure EIGRP AS number is 100.
R3
router eigrp 100
network 10.0.37.0 0.0.0.255
no auto-summary
R6
router eigrp 100
network 10.0.67.0 0.0.0.255
no auto-summary
R7
router eigrp 100
network 10.0.37.0 0.0.0.255
network 10.0.67.0 0.0.0.255
network 10.0.70.0 0.0.0.255
network 10.0.71.0 0.0.0.255
no auto-summary
R10
router eigrp 100
network 10.0.70.0 0.0.0.255
network 10.0.110.0 0.0.0.255
Lab 7: Redistribution
network 10.10.1.0 0.0.0.255
network 10.10.2.0 0.0.0.255
network 10.10.3.0 0.0.0.255
network 10.10.4.0 0.0.0.255
no auto-summary
R11
router eigrp 100
network 10.0.71.0 0.0.0.255
network 10.0.110.0 0.0.0.255
network 11.11.1.0 0.0.0.255
network 11.11.2.0 0.0.0.255
network 11.11.3.0 0.0.0.255
network 11.11.4.0 0.0.0.255
no auto-summary
Task 5: Enable RIP as per given in topology. Make sure RIP v2 configure.
R2
router rip
version 2
network 10.0.0.0
no auto-summary
R5
router rip
version 2
network 10.0.0.0
no auto-summary
R8
router rip
version 2
network 10.0.0.0
no auto-summary
R9
router rip
version 2
Lab 7: Redistribution
network 9.0.0.0
network 10.0.0.0
no auto-summary
Task 6: Basic redistribution between RIP and OSPF. (All subnets will be redistribute)
R2
router ospf 1
redistribute rip metric 1 subnets
router rip
redistribute ospf 1 metric 1
R5
router rip
redistribute ospf 1 metric 1
router ospf 1
redistribute rip metric 1 subnets
Task 7: Basic redistribution between OSPF to EIGRP (All subnets will be redistribute and
exclude R6 for Redistribution).
R3
router eigrp 100
redistribute ospf 1 metric 1 1 1 1 1
router ospf 1
redistribute eigrp 100 metric 1 subnets
Task 8: All the Loopback will be manual summarize.
R9
interface FastEthernet0/0
ip summary-address rip 9.9.0.0 255.255.248.0
R10
interface Serial0/0
ip summary-address eigrp 100 10.10.0.0 255.255.248.0
Lab 7: Redistribution
interface Serial0/1
ip summary-address eigrp 100 10.10.0.0 255.255.248.0
R11
interface Serial0/0
ip summary-address eigrp 100 11.11.0.0 255.255.248.0
interface Serial0/1
ip summary-address eigrp 100 11.11.0.0 255.255.248.0