eesti standard evs-en iso 3691-1:2015

EESTI STANDARD EVS-EN ISO 3691-1:2015

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)

This document is a preview generated by EVS

EVS-EN ISO 3691-1:2015

Tagasisidet standardi sisu kohta on võimalik edastada, kasutades EVS-i veebilehel asuvat tagasiside vormi või saates e-kirja meiliaadressile [email protected]. ICS 53.060 Standardite reprodutseerimise ja levitamise õigus kuulub Eesti Standardikeskusele Andmete paljundamine, taastekitamine, kopeerimine, salvestamine elektroonsesse süsteemi või edastamine ükskõik millises vormis või millisel teel ilma Eesti Standardikeskuse kirjaliku loata on keelatud. Kui Teil on küsimusi standardite autorikaitse kohta, võtke palun ühendust Eesti Standardikeskusega: Aru 10, 10317 Tallinn, Eesti; koduleht www.evs.ee; telefon 605 5050; e-post [email protected] The right to reproduce and distribute standards belongs to the Estonian Centre for Standardisation No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, without a written permission from the Estonian Centre for Standardisation. If you have any questions about copyright, please contact Estonian Centre for Standardisation: Aru 10, 10317 Tallinn, Estonia; homepage www.evs.ee; phone +372 605 5050; e-mail [email protected]

EESTI STANDARDI EESSÕNA NATIONAL FOREWORD

See Eesti standard EVS-EN ISO 3691-1:2015 sisaldab Euroopa standardi EN ISO 3691-1:2015 ingliskeelset teksti. This Estonian standard EVS-EN ISO 3691-1:2015 consists of the English text of the European standard EN ISO 3691-1:2015. Standard on jõustunud sellekohase teate avaldamisega EVS Teatajas. Euroopa standardimisorganisatsioonid on teinud Euroopa standardi rahvuslikele liikmetele kättesaadavaks 29.07.2015.

This standard has been endorsed with a notification published in the official bulletin of the Estonian Centre for Standardisation. Date of Availability of the European standard is 29.07.2015. Standard on kättesaadav Eesti Standardikeskusest. The standard is available from the Estonian Centre for Standardisation.


EUROPEAN STANDARD

NORME EUROPÉENNE

EUROPÄISCHE NORM

EN ISO 3691-1

July 2015

ICS 53.060 Supersedes EN ISO 3691-1:2012

English Version

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-

1:2011, including Cor 1:2013)

Chariots de manutention - Exigences de sécurité et vérification - Partie 1: Chariots de manutention

automoteurs, autres que les chariots sans conducteurs, les chariots à portée variable et les chariots transporteurs de

charges (ISO 3691-1:2011, y compris Cor 1:2013)

Sicherheit von Flurförderzeugen - Sicherheitsanforderungen und Verifizierung - Teil 1: Motorkraftbetriebene Flurförderzeuge mit Ausnahme von fahrerlosen

Flurförderzeugen, Staplern mit veränderlicher Reichweite und Lastentransportfahrzeugen (ISO 3691-1:2011,

einschließlich Cor 1:2013)

This European Standard was approved by CEN on 1 June 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T É E U R OP É E N D E N O R M A LI S A T I O N EUR O P Ä IS C HES KOM I TE E F ÜR NOR M UNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

Ref. No. EN ISO 3691-1:2015 E


EN ISO 3691-1:2015 (E)

3

European foreword

The text of ISO 3691-1:2011 including Cor 1:2013 has been prepared by Technical Committee ISO/TC 110 “Industrial trucks” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 3691-1:2015 by Technical Committee CEN/TC 150 “Industrial Trucks - Safety” the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at the latest by January 2016.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 3691-1:2012.

This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of 2006/42/EC.

For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Endorsement notice

The text of ISO 3691-1:2011 including Cor 1:2013 has been approved by CEN as EN ISO 3691-1:2015 without any modification.

EVS-EN ISO 3691-1:2015


EN ISO 3691-1:2015 (E)

4

Annex ZA (informative)

Relationship between this European Standard and the Essential

Requirements of EU Directive 2006/42/EC

This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery.

Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the clauses of this standard, except clause 6.2.7 and with the exclusion of all references to ISO/TS 3691-8 confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations.

WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard.

EVS-EN ISO 3691-1:2015


ISO 3691-1:2011(E)

© ISO 2011 – All rights reserved iii

Contents Page

Foreword ............................................................................................................................................................ iv

Introduction ......................................................................................................................................................... v

1 Scope ...................................................................................................................................................... 1

2 Normative references ............................................................................................................................ 2

3 Terms and definitions ........................................................................................................................... 4

4 Safety requirements and/or protective measures .............................................................................. 6 4.1 General ................................................................................................................................................... 6 4.2 Starting/moving ..................................................................................................................................... 7 4.3 Brakes ..................................................................................................................................................... 8 4.4 Manual control actuators ...................................................................................................................... 9 4.5 Power systems and accessories ....................................................................................................... 13 4.6 Systems for lifting and tilting ............................................................................................................. 16 4.7 Operator positions .............................................................................................................................. 19 4.8 Stability ................................................................................................................................................. 25 4.9 Protective devices ............................................................................................................................... 26 4.10 Visibility and lighting .......................................................................................................................... 28 4.11 Environmental conditions .................................................................................................................. 28 4.12 Devices for towing ............................................................................................................................... 30

5 Verification of safety requirements and/or protective measures ................................................... 30 5.1 General ................................................................................................................................................. 30 5.2 Structural tests .................................................................................................................................... 30 5.3 Functional verification ........................................................................................................................ 31

6 Information for use .............................................................................................................................. 31 6.1 General ................................................................................................................................................. 31 6.2 Instruction handbook .......................................................................................................................... 31 6.3 Marking ................................................................................................................................................. 35

Annex A (normative) Determination of driving direction and rated capacity ............................................. 38

Annex B (informative) List of significant hazards ......................................................................................... 41

EVS-EN ISO 3691-1:2015


ISO 3691-1:2011(E)

© ISO 2011 – All rights reserved v

Introduction

General

This document is a type-C standard as stated in ISO 12100.

The machines concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document.

When requirements of this type-C standard are different from those which are stated in type-A or B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard.

The ISO 3691 series of standards covers safety requirements and their verification for industrial trucks as defined in ISO 5053.

Structure

An important step forward in the work on the ISO 3691 series of standards was the agreement to issue a new structure of International Standards for industrial trucks having on one side basic standards for all kinds of trucks (see Foreword) and on the other side independent standards to cover the respective specific functions of industrial trucks, e.g. visibility, noise, vibration, electrical requirements, etc.

Assessment of hazards

The product needs to be designed in such a way that it is fit for its purpose or function and can be adjusted and maintained without putting persons at risk when used under the conditions foreseen by the manufacturer.

In order to properly design a product and to cover all specific safety requirements, the manufacturer will have to identify the hazards that apply to his product and carry out a risk assessment. The manufacturer will then need to design and construct the product taking this assessment into account.

The aim of this procedure is to eliminate the risk of accidents throughout the foreseeable lifetime of the machinery, including the phases of assembling and dismantling where risks of accidents could also arise from foreseeable abnormal situations.

In selecting the most appropriate methods, the manufacturer will need to apply the following principles, in the order given here:

a) eliminate or reduce risks as far as possible by design (inherently safe machinery design and construction);

b) take the necessary protective measures in relation to risks that cannot be eliminated by design;

c) inform users of any shortcoming of the protective measures adopted;

d) indicate whether any particular training is required;

e) specify any need to provide personal protection equipment;

f) refer to the appropriate user's document for proper operating instructions.

Industrial trucks need to be designed to prevent foreseeable misuse wherever possible, if such would engender risk. In other cases, the instructions will need to draw the user's attention to ways shown by experience in which the machinery ought not be used.

EVS-EN ISO 3691-1:2015


ISO 3691-1:2011(E)

vi © ISO 2011 – All rights reserved

This part of ISO 3691 does not repeat all the technical rules which are state-of-the art and which are applicable to the material used to construct the industrial truck. Reference will also need to be made to ISO 12100.

Legislative situation/Vienna Agreement

From the very beginning, the task of the working group was to revise ISO 3691:1980 and establish worldwide basic standards to comply with the major legislative regulations in, for example, the EU, Japan, Australia and North America.

Every effort was made to develop a globally relevant International Standard. That goal was achieved with most of the issues. For several potential problem areas compromises were needed and will be needed in the future. Where divergent regional requirements remain, these are addressed by ISO/TS 3691-7:2011 and ISO/TS 3691-8.

In order to ensure that the revised International Standard will be actively used in the ISO member countries, worldwide, procedures will be necessary to replace the existing national standards and technical regulations by the revised International Standard. In the European Community, ISO and the European Committee for Standardization (CEN) agreed on technical co-operation under the Vienna Agreement, with the aim of replacing European Standards (EN) by International Standards. Other countries are asked to make similar agreements to ensure that their national standards and technical regulations are replaced by this International Standard.

Only by these actions will there be the guarantee that products in accordance with International Standards can be shipped worldwide freely without any technical barriers.

EVS-EN ISO 3691-1:2015


INTERNATIONAL STANDARD ISO 3691-1:2011(E)

© ISO 2011 – All rights reserved 1

Industrial trucks — Safety requirements and verification —

Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks

1 Scope

This part of ISO 3691 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks (hereafter referred to as trucks), as defined in ISO 5053:

a) industrial counterbalanced trucks;

b) reach trucks with retractable mast or retractable fork arm carriage;

c) straddle trucks;

d) pallet-stacking trucks;

e) high-lift platform trucks;

f) trucks with elevating operator position up to 1 200 mm;

g) side-loading trucks (one side only);

h) lateral-stacking trucks (both sides), and lateral- and front-stacking trucks;

i) pallet trucks;

j) bidirectional and multidirectional trucks;

k) tractors with a drawbar pull up to and including 20 000 N;

l) rough-terrain counterbalanced trucks;

m) industrial trucks powered by battery, diesel, gasoline or LPG (liquefied petroleum gas).

NOTE 1 Trucks powered by CNG (compressed natural gas) are not dealt with. It is intended that CNG and other power sources be addressed in future revisions of this part of ISO 3691.

For trucks with an elevating operator position of more than 1 200 mm and/or trucks designed to travel with an elevated load of more than 1 200 mm, this part of ISO 3691 is intended to be used in conjunction with ISO 3691-3.

NOTE 2 ISO 3691-3 is not applicable to counterbalanced fork lift trucks or trucks intended for container handling.

NOTE 3 Some low-level order pickers with an elevating operator's position up to and including 1 200 mm lift height can be equipped with an additional lifting device to lift the load to a maximum lift height of 1 800 mm.

EVS-EN ISO 3691-1:2015


ISO 3691-1:2011(E)

2 © ISO 2011 – All rights reserved

This part of ISO 3691 is not applicable to self-propelled variable-reach trucks, driverless trucks or burden carriers, which are covered in ISO 3691-2, ISO 3691-4 and ISO 3691-6, respectively.

It is not applicable to industrial trucks operating in severe conditions (e.g. extreme climates, freezer applications, hazardous environments), where special precautions can be necessary.

Regional requirements, additional to the requirements given in this part of ISO 3691, are addressed in ISO/TS 3691-7 and ISO/TS 3691-8.

This part of ISO 3691 deals with all significant hazards, hazardous situations or hazardous events, as listed in Annex B, with the exception of the following, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

It does not establish requirements for hazards that can occur

during construction,

when handling suspended loads that can swing freely,

when using trucks on public roads,

when operating in potentially explosive atmospheres,

when using trucks in very narrow aisles with clearance of less than 500 mm to the racks,

arising from a non-ergonomic body attitude when driving sit-on trucks, load trailing,

during travelling with unladen trucks having a rated capacity of more than 10 000 kg, due to visibility concerns,

due to overload.

NOTE 4 For the purposes of this part of ISO 3691, fork arms, load platforms and integrated attachments are considered to be parts of the industrial truck. Attachments mounted on the load carrier or on the fork arms which are removable by the user are not considered to be part of the industrial truck. Requirements for attachments are given in the appropriate clauses.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 2328:2007, Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions

ISO 2330, Fork-lift trucks — Fork arms — Technical characteristics and testing

ISO 2867:2006, Earth-moving machinery — Access systems

ISO 3287:1999, Powered industrial trucks — Symbols for operator controls and other displays

ISO 3411:2007, Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope

EVS-EN ISO 3691-1:2015


ISO 3691-1:2011(E)

© ISO 2011 – All rights reserved 3

ISO 3691-3:—1), Industrial trucks — Safety requirements and verification — Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads

ISO 3691-5:2009, Industrial trucks — Safety requirements and verification — Part 5: Pedestrian-propelled trucks

ISO 3795:1989, Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials

ISO 5053, Powered industrial trucks — Terminology

ISO 6055:2004, Industrial trucks — Overhead guards — Specification and testing

ISO 6292:2008, Powered industrial trucks and tractors — Brake performance and component strength

ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction

ISO 13284:2003, Fork-lift trucks — Fork-arm extensions and telescopic fork arms —Technical characteristics and strength requirements

ISO 13564-1:—1), Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks up to and including 10 t capacity

ISO 13849-1:2006, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design

ISO 13850:2006, Safety of machinery — Emergency stop — Principles for design

ISO 15870:2000, Powered industrial trucks — Safety signs and hazard pictorials — General principles

ISO 15871:2000, Industrial trucks — Specifications for indicator lights for container handling and grappler arm operations

ISO 20898:2008, Industrial trucks — Electrical requirements

ISO 21281:2005, Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks — Rules for the construction and layout of pedals

ISO 22915-1:2008, Industrial trucks — Verification of stability — Part 1: General

ISO 22915-2:2008, Industrial trucks — Verification of stability — Part 2: Counterbalanced trucks with mast

ISO 22915-3:2008, Industrial trucks — Verification of stability — Part 3: Reach and straddle trucks

ISO 22915-4:2009, Industrial trucks — Verification of stability — Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height

ISO 22915-7:2009, Industrial trucks — Verification of stability — Part 7: Bidirectional and multidirectional trucks

ISO 22915-8:2008, Industrial trucks — Verification of stability — Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated

ISO 22915-10:2008, Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices

1) To be published.

EVS-EN ISO 3691-1:2015


ISO 3691-1:2011(E)

4 © ISO 2011 – All rights reserved

ISO 22915-11:—2) , Industrial trucks — Verification of stability — Part 11: Industrial variable-reach trucks

ISO 22915-20:2008, Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization

ISO 22915-21:2009, Industrial trucks — Verification of stability — Part 21: Order-picking trucks with operator position elevating above 1 200 mm

ISO 24134:2006, Industrial trucks — Additional requirements for automated functions on trucks

ISO 24135-1:2006, Industrial trucks — Specifications and test methods for operator restraint systems — Part 1: Lap-type seat belts

IEC 60695-11-10:2003, Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods

3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 5053 and ISO 12100 and the following apply.

3.1 self-propelled industrial truck wheeled vehicle having at least three wheels with a powered driving mechanism, except for those running on rails, designed either to carry, tow, push, lift, stack or tier in racks any kind of load and controlled by an operator (3.7)

NOTE See ISO 5053 for a comprehensive terminology.

3.2 pedestrian-controlled truck truck designed to be controlled by an operator (3.7) walking with the truck by means of, for example, a tiller or remote control

NOTE The truck may be equipped with a stand-on option.

3.3 ride-on truck truck designed to be controlled by an operator (3.7) riding on a seat or a driving platform on the truck

NOTE Stand-on industrial trucks with a seat for the operator are considered as being stand-on trucks.

3.4 low-lift truck truck having a lift height of 500 mm or less

3.5 bidirectional truck truck designed to travel in either direction on a line parallel with its longitudinal axis, or perpendicular to this axis

NOTE Adapted from ISO 5053:1987, 3.6.1.2.

2) To be published.

EVS-EN ISO 3691-1:2015


eesti standard evs-en iso 3691-1:2015

Documents