大学院講義 「静粛工学」...experimental modal analysis for structural dynamics...
TRANSCRIPT
![Page 1: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/1.jpg)
東京工業大学工学院機械系 教授
イワツキ ノブユキ
岩附 信行
大学院講義
「静粛工学」
![Page 2: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/2.jpg)
Tokyo Institute of TechnologyDept. of Mechanical EngineeringSchool of Engineering
Prof. Nobuyuki Iwatsuki
Lecture for Graduate Students
Silent Engineering
![Page 3: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/3.jpg)
Lecture syllabus
Course title: Silent EngineeringAcademic major: Mechanical EngineeringOffered quarter: 2QDay/period: Tuesday 5-6Credits: 1-0-0Lecture room: I124/G111Registration number: MECH.D532Lecturer: Prof. Nobuyuki Iwatsuki
Office: I1-305E-mail: [email protected]
![Page 4: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/4.jpg)
Course description and aims:The course offers the knowledge on the methods to quantitatively
estimate noise radiating from vibrating plates and to passivelyreduce the noise and includes the modal analysis and forcedvibration analysis of plates, the estimation of sound power radiatingfrom the plates based on the vibration analyses, the estimation ofsound power transmitting plates excited by sound, and the reductionof sound power with the structural optimization or dampingmaterials.
Because noise radiation from vibrating machinery strongly affectthe added value of the machinery, it is expected to reveal thepropagation mechanism from vibration to noise and to reduce noiseradiating from machinery. As the application of learning ofmechanical dynamics in Mechanical Engineering Course, studentswill understand the energy balance in vibrating plate and theestimation of frequency spectrum of sound radiation based on thevibration analysis and sound field analysis. Moreover, students willlearn the methods to reduce the sound radiation with the structuraloptimization or damping materials by taking account of costperformance.
![Page 5: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/5.jpg)
Student learning outcomes:
By the end of this course, students will be able to:(1)Explain the outline of calculation process to analyze vibration
mode and forced vibration of plate(2)Explain the relation between the energy balance in vibrating
plate and the sound radiation power(3)Explain the outline of the methods to estimate frequency
spectrum of sound power radiating from vibrating plate(4)Explain the structural optimization to reduce noise radiation
(5)Explain the principle to reduce vibration with damping materials
![Page 6: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/6.jpg)
Keywords:Vibration and noise, sound radiation power, modal analysis, forced vibration, parameters to estimate noise, structural optimization to reduce noise radiation, vibration damping
Class flow:Important issues are summarized at the end of lecture every week. Students are expected to understand what they learn by themselves.
![Page 7: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/7.jpg)
Schedule:Class 1 Modal analysis and forced vibration analysis of plate(June 18) - Introduction of various methods to theoretically
analyze flexural vibration of plate -Class 2 Examples of analysis for various plates
(June 25) - Fixing conditions of plates and the results of modal analysis -
Class 3 Lecture will be cancelled due to international(July 2) conference
Class 4 Formation of sound field due to vibrating source(July 9) - Point sound source and wave equation -
![Page 8: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/8.jpg)
Class 5 Fundamental equations to estimate sound power (July 16) radiating from vibrating plate
- Energy balance in vibrating plate and parameters to estimate sound radiation power -
Class 6 Examples of estimation of sound power radiating (July 23) from vibrating plate
- Estimation of sound power radiating from rectangularplates and circular plates -
Class 7 Structural optimization to reduce sound radiation power(July 30) - Noise reduction by changing plate thickness or adding
ribs or hollows on plates -Class 8 Setting damping materials to reduce sound radiation (Aug 6) power
- Noise reduction with constraint and non-constraint dampers -
![Page 9: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/9.jpg)
Class 5 Examples of estimation of sound power radiating (July 10) from vibrating plate
- Estimation of sound power radiating from rectangularplates and circular plates -
Class 6 Excitation by sound and the estimation of sound power(July 17) secondary radiating from the excited plate
- Transmission loss of plate -Class 7 Structural optimization to reduce sound radiation power(July 24) - Noise reduction by changing plate thickness or adding
ribs or hollows on plates -Class 8 Setting damping materials to reduce sound radiation (July 31) power
- Noise reduction with constraint and non-constraint dampers -
![Page 10: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/10.jpg)
Textbook, reference book, course material:No textbook is required. Several handouts will be often distributedvia OCW-i. The following book is recommended as a reference book:(1)W. Weaver Jr., S. Timoshenko and D. H. Young,
Vibration Problems in Engineering (Fifth Edition),John Wiley and Sons (1990).
(2)K. Suzuki, K. Nishida, K. Maruyama and T. Watanabe, Vibrations and Acoustics for Mechanical Engineering, Science-Sha Co. Ltd. (2000) (in Japanese).
Assessment criteria and methods:Students' knowledge on the process to estimate the frequency spectrum of sound power radiating from vibrating plate based on accurate vibration analysis and sound radiation analysis and the methods to reduce sound power with structural optimization and damping optimization is assessed via submitted reports(100%) on several issues.
![Page 11: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/11.jpg)
Related courses:Advanced Sound and Vibration Measurement, Experimental Modal Analysis for Structural Dynamics
Prerequisites:Students must have successfully completed 'Mechanical Vibration’or must have equivalent knowledge.
![Page 12: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/12.jpg)
June 18, 2019
Silent Engineering(Lecture 1)
Modal analysis and forced vibration analysis of thin plate
-Introduction of various methods to theoretically analyze flexural vibration of plate -
Tokyo Institute of TechnologyDept. of Mechanical EngineeringSchool of Engineering
Prof. Nobuyuki Iwatsuki
![Page 13: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/13.jpg)
1. Introduction of lecturerPlease visit my WEB-site:http://www.dynamics.mep.titech.ac.jp/index.php
Nobuyuki IwatsukiProfessor, Dr. Eng.
Affiliation:Department of Mechanical EngineeringSchool of EngineeringTokyo Institute of Technology
![Page 14: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/14.jpg)
Biography:1978 Graduated from Kumamoto High School1981 Graduated from Dept. of Mech. Eng., Tokyo Tech.,
B. of Eng.1987 Graduated from Dept. of Mech. Eng., Graduate School of Sci.
and Eng., Tokyo Tech., Dr. of Eng.Research associate, Precision and Intelligent Laboratory,Tokyo Tech.
1995 Assoc. Prof. , Faculty of Eng., Tokyo Tech.1999 Visiting researcher at the Ohio State University and Stanford
University, USA2003 Prof., Graduate School of Sci. and Eng., Tokyo Tech.2016 Prof. and Dean, School of Eng., Tokyo Tech.
![Page 15: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/15.jpg)
Research Themes:(A)Synthesis and Control of Robotic Mechanisms
Especially focused on ‘Mechanism Design and Motion Control of Hyper Redundant/UnderactuatedRobots’
(B)Silent EngineeringEspecially focused on ‘Estimation of Sound Power Radiating from Vibrating Structure and Structural Optimization to Reduce the Sound Power’
(C)Functional Material ActuatorsEspecially focused on ‘Development of Micro CiliaryActuators in Group’
![Page 16: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/16.jpg)
Lorentz forceF
Magneticfield B
Z-coil
X-coil
Y-coil
GFRP
(1)Noise Estimation of MRI Device
MRI device
Introduction of Several Research Works
Frequency f Hz
Soun
d ra
diat
ion
pow
er W
rad
dBIn
put p
ower
Win
W0 400 800 1200 1600
10-15
10-10
10-5
100
0 400 800 1200 1600-20
20
60
100
CalculatedMeasured
Sound intensity measurement
![Page 17: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/17.jpg)
0 500 1000 1500 2000-20
0
20
40
60
80MeasuredEstimated
Frequency [Hz]
Soun
d pr
essu
re le
vel [
dB]
200 coins(1 Jpn. Yen)are dropped from here.
Ensemble average
FEM Experimental
12th Mode
133rd ModeOrigin
deviated
(2)Estimation of Impact Noise of Coin Counting Machine
![Page 18: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/18.jpg)
The calculated acceleration and sound pressure
Cross-section image by X-ray CT
(3)Estimation of Sound Radiation from Frog-type Guiro
Expanded
![Page 19: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/19.jpg)
A steel drum which can generate musical scale
FEM model
Measured sound
Vibration mode
Calculated sound♪♪
♪ ♪
C
G
F
B
EAiming to create a new musical instrument
(4)Estimation of Musical Scale Generation of Steel Drum
![Page 20: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/20.jpg)
2. Noise and Added Value of Machinery
Definition of Noise:Noise is a sound which is not desirable topersons and is the sound which blocks transfer of voices, music and so on orgives pain or injury to human ear.
-JIS Z 8106-1976
![Page 21: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/21.jpg)
Classification of Noise:On propagation medium:○Air borne noise○Solid borne noise (Structure borne noise)
On sound source:○External noise source・Road traffic noise・Airplane noise・Machinery noise in factory
○Internal noise source・Construction equipment noise ・Work sound in factory・Human voice in office, noise from office machine・Crashing sound to floor of wall due to walking
or opening/closing of door
![Page 22: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/22.jpg)
On time characteristics:○Steady noise
Noise of a continuous and almost constant level○Unsteady noise
・Time varying noiseNoise changing its level irregularly and continuously
・Intermittent noiseNoise generated intermittently with time interval
・Impact noiseNoise in which continuation time is very short
○Back ground noiseNoise other than the target of measurement
![Page 23: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/23.jpg)
Noise and added value of machinery:Amount-of-money evaluation per 1dB noise in a judicial precedent
Reparations: 1,500JPY/month/person
65dB (Regulation value 45dB)
5 person family
Ex.: 1,500JPY×20dB×5 persons = 150,000JPY/month( 1,800,000 JPY / year )
![Page 24: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/24.jpg)
Noise reduction expense increases in proportion to the square of a noise reduction rate!
90dB (-20dB) 85dB (-25dB)
110dB
5,000,000JPY
JPY000,000,5dB20dB25
JPY000,800,72
×
=
Noise reduction
Noise reduction
![Page 25: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/25.jpg)
Example of machinery noise
Automobile:Road noise Increase of mass Increase of Engine noise Add damping materials fuel consumption
3. Machinery Noise
![Page 26: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/26.jpg)
Excitation by the interaction of electromagnetic forces
Lorentz force F
Magnetic field B
Z coil
X coil
Y coil
GFRPMagnetic Resonant Imaging Device
![Page 27: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/27.jpg)
Noise office machines
![Page 28: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/28.jpg)
Coin counting machine
Cash-receipt-and-disbursement machine
Noises due to collision and conveyance of bills and coins
Bill sorting machine
![Page 29: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/29.jpg)
Noise power radiating from vibrating plate or shellas a case of machinery
Noise radiationVibration propagation to the air
Exciting forceMechanical excitationAcoustic excitation
Plate/shell structure
Vibration propagationto other structure
↓Multi-DOFvibration system
“Flexural vibrationdue to natural mode ofvibration”
![Page 30: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/30.jpg)
Vibration energy and radiating sound power
Input power Win=FV
Sound (noise) radiation power Wrad
Energy of steady vibration E
Power to other structure Wext(negligible if stiff connection)
Internal dissipated power Wint(Dissipated as heat)
Velocity at exciting point
Calculated with acceleration of vibrating plane
Viscous damping(depends on velocity
“Accurately calculatedwith vibration response”
Wrad=ηradωE<Wint
![Page 31: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/31.jpg)
Therefore, the forced vibration response of thin plate or shell should be analyzed with an adequate accuracy based on theoretical modal analysis of the plate or shell.
![Page 32: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/32.jpg)
4. Forced Vibration Analysis of Thin Plate
4.1 Equation of vibration Assumptions:(1)Thickness, h , of plate is enough small than side length.(2)Cross-section before deformation is kept after deformation.
“Kirchhoff’s assumption”(3)Neutral plane is not extended.(4)External force, p(x,y), is distributed perpendicular to the
plate.(5)Shear deformation and rotational inertia are negligible.
“They cannot be ignored for thick plate.”Reissner-Mindlin Theory
![Page 33: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/33.jpg)
Forces and moments applied on thin plate
Young’s modulus: EPoison’s ratio: νDensity: ρ p(x,y)
Distributed external force Bending moment
per unit width
Shearing force per unit width
Torsional moment per unit width
![Page 34: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/34.jpg)
Force and moment balance:
02
2
=+−∂
∂+
∂∂
dtwdhp
yQ
xQ yx ρ
Force balance in z direction:
0=+∂
∂−
∂
∂y
yxy Qy
Mx
MMoment balance about x-axis:
0=−∂∂
+∂
∂x
xyx Qx
My
MMoment balance about y-axis:
Inertial force
(1)
(2)
(3)
By substituting Eqs.(2) and (3) into Eq.(1), we obtain
2
22
2
2
2
2
2twhp
yxM
yM
xM xyyx
∂∂
−=∂∂
∂−
∂
∂+
∂∂
ρ (4)
![Page 35: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/35.jpg)
Shearing forces and moments per unit width:
dzQ
dzQh
h yzy
h
h xzx
∫∫
−
−
=
=2/
2/
2/
2/
τ
τShearing force:
zdzM
dzzMh
h yzy
h
h xzx
∫∫
−
−
=
=2/
2/
2/
2/
σ
σBending moment: zx
σx
xy
h
h yxyx
h
h xyxy
MzdzM
dzzM
==
=
∫∫
−
−
2/
2/
2/
2/
τ
τTorsional moment:
(5)
(6)
(7) Neutral plane
![Page 36: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/36.jpg)
Displacement in plate:
wzwywzzv
xwzzu
=∂∂
−=
∂∂
−=
)(
)(
)( (8)
(9)
(10)
w
w(z)
u(z) zxw∂∂
z
Before deformation
Strains:
yxwz
xzv
yzuz
ywz
yzvz
xwz
xzuz
xy
y
x
∂∂∂
−=∂
∂+
∂∂
=
∂∂
−=∂
∂=
∂∂
−=∂
∂=
2
2
2
2
2
2)()()(
)()(
)()(
γ
ε
ε (11)
(12)
(13)
![Page 37: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/37.jpg)
Displacement in plate:
wzwywzzv
xwzzu
=∂∂
−=
∂∂
−=
)(
)(
)( (8)
(9)
(10)
w
w(z)
u(z) zxw∂∂
z
Before deformation
Strains:
yxwz
xzv
yzuz
ywz
yzvz
xwz
xzuz
xy
y
x
∂∂∂
−=∂
∂+
∂∂
=
∂∂
−=∂
∂=
∂∂
−=∂
∂=
2
2
2
2
2
2)()()(
)()(
)()(
γ
ε
ε (11)
(12)
(13)
![Page 38: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/38.jpg)
Relation between stresses and strains:
)()1(2
)(
)]()([1
)(
)]()([1
)(
2
2
zEz
zzEz
zzEz
xyxy
xyy
yxx
γν
τ
νεεν
σ
νεεν
σ
+=
+−
=
+−
= (14)
(15)
(16)
By substituting Eqs.(8)-(16) into Eqs.(5)-(7),we obtain
Moments written with bending deformation:
(17)
(18)
(19)yx
wvDM
xw
ywDM
yw
xwDM
xy
y
x
∂∂∂
−−=
∂∂
+∂∂
−=
∂∂
+∂∂
−=
2
2
2
2
2
2
2
2
2
)1(
ν
ν
![Page 39: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/39.jpg)
where
By substituting Eqs.(17)-(19) into Eq.(3),we obtain
)1(121 2
32/
2/
22 νν −
=−
= ∫−EhdzzED
h
h
Bending stiffness of plate
ptwh
yw
yxw
xwD =
∂∂
+∂∂
+∂∂
∂+
∂∂
2
2
4
4
22
4
4
4
)2( ρ
Equation of flexural vibration of thin plate
(20)
(21)
![Page 40: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/40.jpg)
4.2 Free vibration analysisModal analysis
0)2( 2
2
4
4
22
4
4
4
=∂∂
+∂∂
+∂∂
∂+
∂∂
twh
yw
yxw
xwD ρ
Equation of free vibration of plate:
Let assume the solution with separation of variables as)sincos)(,(),,( tBtAyxWtyxw ωω +=
Mode shape Harmonic solution
(22)
(23)
By substituting Eq.(23) into Eq.(22),we obtain
0)2( 24
4
22
4
4
4
=−∂∂
+∂∂
∂+
∂∂ Wh
yW
yxW
xWD ωρ (24)
We have to obtain function W(x,y) which satisfiesEq.(24) and boundary condition.
![Page 41: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/41.jpg)
Ex. A simply supported rectangular plate
x
y
a
b
O
Thickness: hDensity: ρYoung’s modulus: EPoison’s ratio: ν
Boundary conditions:
0)(,0;,0
0)(,0;,0
2
2
2
2
2
2
2
2
=∂∂
+∂∂
−===
=∂∂
+∂∂
−===
xw
ywDMwby
yw
xwDMwax
y
x
ν
ν
Resultantly we obtain
0,0;,0
0,0;,0
2
2
2
2
=∂∂
==
=∂∂
==
yWWby
xWWax
(25)
(26)
![Page 42: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/42.jpg)
Let assume vibration shape W(x,y) as
byn
axmCyxW mn
ππ sinsin),( =
Then the boundary conditions can be satisfied as0),(),()0,(),0( ==== bxWyaWxWyW
Wb
nyWW
am
xW
2
22
2
2
2
22
2
2
, ππ−=
∂∂
−=∂∂
Since
0),()0,(),(),0(2
2
2
2
2
2
2
2
=∂
∂=
∂∂
=∂
∂=
∂∂
ybxW
yxW
xyaW
xyW
(25)
(26)
(27)
We have to confirm that W(x,y) satisfies Eq.(24).
![Page 43: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/43.jpg)
By substituting Eq.(25)into Eq.(24),we obtain
0)2( 24
44
22
422
4
44
=−++ WhWb
nWba
nmWa
mD ωρπππ
Therefore
22
2
2
24
4
44
22
422
4
442 )()2(
bn
am
hD
bn
banm
am
hD
+=++=ρππππ
ρω
)( 2
2
2
22
bn
am
hD
+=ρ
πω
Thus if angular frequency is as
,
Eq.(24) can be satisfied.
(28)
Natural angular frequency
![Page 44: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/44.jpg)
Nodal lines
Mode of vibration of simply supported rectangular thin plate
Mode shape of simply supported rectangular thin plateCan be represented with nodal lines.
![Page 45: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/45.jpg)
4.3 Forced vibration analysis
tyxptwh
yw
yxw
xwD ωρ cos),()2( 2
2
4
4
22
4
4
4
=∂∂
+∂∂
+∂∂
∂+
∂∂
Equation of forced vibration of plate:
(29)
Harmonic excitationNatural angular frequency : ωiMode shape (Eigenfunction): Wi(x,y)
have been calculated through free vibration analysis (modal analysis) where i means m,n
Let assume solution of forced vibration as linear combination of eigenfunction as
),()(),,( yxWtFtyxw ii
i∑= (30)
Time function Eigenfunction
![Page 46: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/46.jpg)
By substituting Eq.(30)into Eq.(29),we obtain
tyxpyW
yxW
xWDFWFh
i
iiiii
ii ωρ cos),()2( 4
4
22
4
4
4
=∂∂
+∂∂
∂+
∂∂
+∑∑
Since Wi satisfies Eq.(24),
WhyW
yxW
xWD
yW
yxW
xWDWh
iiii
iiiii
24
4
22
4
4
4
4
4
22
4
4
42
)2(
0)2(
ωρ
ωρ
=∂∂
+∂∂
∂+
∂∂
∴
=∂∂
+∂∂
∂+
∂∂
+−
(31)
(32)
By substituting Eq.(32)into Eq.(31),we obtain
tyxpWFhWFhi
iiiii
i ωωρρ cos),(2 =+ ∑∑ (33)
![Page 47: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/47.jpg)
Let rewrite Eq.(33) as matrix form as
[ ] [ ] tyxp
F
FF
WWWh
F
FF
WWWh
N
NN
N
N ωωωωρρ cos),(2
1
22
221
21
2
1
21 =
+
W SFF・・
tyxphh ωρρ cos),(=+∴ SFW (34)
By multiplying WT from left side and integrating the equation in whole Plate, we obtain
dstyxpdshdsh TTT ∫∫∫ =+SSSWSFWFWW ωρρ cos),(
( ) ( ) ( ) tdsyxpdshdsh TTT ωρρ cos),(∫∫∫ =+∴SSSWFSFWFWW
N×N matrix N×N matrix N×1 vector
(35)
![Page 48: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/48.jpg)
F
F
+
∫∫
∫∫∫∫∫
∫∫
∫∫∫∫∫
S NNS N
SS
S NNSS
S NS N
SS
S NSS
dsWdsWW
dsWdsWW
dsWWdsWWdsW
h
dsWdsWW
dsWdsWW
dsWWdsWWdsW
h
221
21
22
2212
21
12
2122
21
21
21
2212
1212
1
ωω
ωω
ωωω
ρ
ρ
Let rewrite Eq.(35) as
t
dsyxpW
dsyxpW
dsyxpW
S N
S
S
ωcos
),(
),(
),(
2
1
=
∫
∫∫
(36)
00
00
Because of orthogonality of eigenfunction
![Page 49: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/49.jpg)
( ) ( ) tdsyxpWdsWdiaghdsWdiaghS iS iiS i ωωρρ cos),(222
=⋅+⋅ ∫∫∫
FF
Let set as
∫∫
∫
=
==
=
S ii
iiS iii
S ii
dsyxpWQ
mdsWhk
dsWhm
),(
222
2
ωωρ
ρ Modal mass
Modal stiffness
Modal load
We can obtain
( ) ( ) tQkdiagmdiag iii ωcos
=+
FF
(37)
(38)
(39)
(40)
(41)
Therefore
)1~ NitQFkFm iiiii ==+ (cosω (42)
Decoupled undamped forced vibration equation
![Page 50: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/50.jpg)
Let adopt viscous damping as proportional damping as
( ) ( ) ( ) tQkdiagcdiagmdiag iiii ωcos
=++
FFF
where iiiiii mkmc ωζ2==
Modal damping ratio
(43)
(44)
Note that this is a important assumptionto make equation decoupled
ThereforetQFkFcFm iiiiiii ωcos=++ (45)
By normalizing the modal mass as unity as12 == ∫S ii dsWm
We obtain
)1(cos2 2 NitQFFF iiiiiii ~ ==++ ωωωζ
(46)
(47)
Decoupled damped forced vibration equation
![Page 51: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/51.jpg)
Based on the solution of damped forced vibration system with 1 DOF,we can obtain
( )( ) ( )
)1(2tan
2
cos
221
2222
Ni
tQF
i
iii
iii
iii
~ =−
=
+−
−=
−
ωωωωζ
φ
ωωζωω
φω
where
(48)
(49)
Therefore the vibration displacement of thin plate can be represented as
( )( ) ( )
)1(2tan
2
cos),(
),()(),,(
221
2222
Ni
tyxWQ
yxWtFtyxw
i
iii
iiii
iii
iii
~
=−
=
+−
−=
⋅=
−
∑
∑
ωωωωζ
φ
ωωζωω
φω
where
(50)
![Page 52: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/52.jpg)
If the plate is excited by a force, P(t), at a certain point(xd,yd) , the distributed external force, p(x,y,t) can berepresented as
)()()(),,( dd yyxxtPtyxp −−= δδ
where δ denotes Dirac’s delta function
We can calculate vibration displacement, velocity and acceleration of thin plate
),()(),( ddS iii yxWtPdsyxpWQ ∫ ==
Therefore modal load, Qi, can be calculated as
![Page 53: 大学院講義 「静粛工学」...Experimental Modal Analysis for Structural Dynamics Prerequisites: Students must have successfully completed 'Mechanical Vibration’ or must have](https://reader033.vdocuments.site/reader033/viewer/2022041914/5e68ae777dbca047d07dbb3f/html5/thumbnails/53.jpg)
5. Concluding remarksAs an introduction of silent engineering, the following issues are explained. (1)Noise radiating from machinery often determine
the added value of machinery.(2)It is important to accurately analyze the
vibration of thin plate or shell which covermachinery.
(3)Vibration equation of thin plate was derived.(4)Forced vibration of thin plate can be calculated
with the decoupled equation through modal analysis of the plate.