educational solutions from schneider electric

Technical education

Educational

solutionsCatalogue 2013 - 2014

In the field of electricity, the desire to save energy and concerns about saving the environment will encourage those working in the industry to re-think the very heart of their business. They are about to enter a new era, an era of energy management.

To anticipate and support this evolution, Schneider Electric is bringing to industry both its experience in training and its role as an energy management specialist.

Training has always been a major concern for Schneider Electric.Considered a permanent process from initial training through to ongoing professional development, training supports men and women as they prepare to manage their futures.

This policy relies above all on a requirement for excellence, the very excellence that has created the reputation of our products: the quality of teaching materials, skilled trainers, effective support and an international dimension. Every year, 40% of our offer is enhanced to stay at the cutting edge of technologies and keep ahead of expectations.

This excellence has enabled Schneider Electric to currently be a major player in the area of training. We train almost 500 teachers annually in close collaboration with the French Ministry of National Education. 10,000 students attend our courses annually with a satisfaction rate of 98%. Our teaching solutions are used in more than 40 countries.

Schneider Electric's commitment to training is based on the company's vision of bringing secure, reliable, efficient, productive, clean, connected energy within everyone's reach.

Our solutions, therefore, place a major emphasis on energy efficiency: measurement, smart equipment, new energy sources, energy diagnostics, electric vehicles, etc. They provide students and professionals with the resources to develop their skills in all of the areas to which energy management applies, such as: industry, buildings, homes, infrastructure and data centers.

When it comes to training, Schneider Electric believes that: the best investment is the development of human competency.

Thierry RuardDirector of Training and

Educational Solutions

Find out more at:

www.schneider-electric.frat the Products and Services tab> Training> Education

Learning a job is fine. Learning the future is better.

In the future, today's businesses are going to evolve into an overall expertise that covers all types of energy. For those working in, this represents both a real challenge and a stimulating opportunity.

www.schneider-electric.fr2 Educational solutions catalogue 2013-2014

The Electrical engineering program offer

Model and prototype in the electrical engineering program

A prototype is an implementation that obtains and verifies the main

characteristics of a system, even if the technical solutions used are not the

same as those that will be implemented in the industrial system.

Models of systems are the result of a combination of existing components

that can be assembled by temporary means or not, and set, configured or

programmed depending on the specifications and student proposals.

Systems for the teaching of the technological innovation and

eco-design specialties

Charging terminal forelectric vehicle

Brushless case Wiser offer

Energy effi ciency improvement modelwith the help of standard components of speed variation

Energy management model carried out using programmable electronic components

3Educational solutions catalogue 2013-2014

High and low voltage electrical distribution management.

You're looking for a system that can perform medium or low voltage

distribution, earth connectioning diagrams, protection selectivity and electrical

authorization.

Indispensable tool complementing the catalog, the France website, training section:www.schneider-electric.fr

Building management

You're looking for a solution to safely implement an electrical installation for

a building and small service industry

Global management of energy

Your research concerns systems that enable the treatment of renewable

energies and manage energy

Processes and machines management

@ Industrial control and machine safety:

You're looking for solutions to study the basic components of automated

systems and machinery safety.

@ Drive and motion control:

Your research concerns speed variation systems for synchronous, brushless

and asynchronous motors.

@ Industrial automation and communication:

Your research concerns solutions to understand programming and

communication between systems.

@ Automated systems:

You're looking for solutions so as to implement of automated systems or

production lines.

products and services

Structure of the catalog

To help you in your choice, this catalog offers different

sections:

www.schneider-electric.fr4 Educational solutions catalogue 2013-2014

Contents

Pages Educational solutions

1- High and low voltage electrical distribution management

8 Medium voltage switchboards10 Communicating low voltage switchboard, energy management switchboard12 Low Voltage Switchboard for professional school13 IT system cabinet and distribution boards14 IT system with fault search16 Earthing diagram (ED) benches17 Protection selectivity bench18 Qualifi cation test-bench19 Habilis system20 Valhabilis20 Additional electrical certifi cation case for the Habilis system21 Securis case

2- Building management

24 Residential and small service industry offer26 KNX modular offer27 KNX case28 KNX panel29 Minibat: instructional mini building30 KNX pack31 Odace radio frequency discovery kit32 Alvidis case33 Addressable fi re security bench34 VDI 19 pack35 BAES Dardo Plus case36 HD network camera, PELCO security imaging pack37 Modular offer and kit for the modeling and prototyping38 Instruction of the energy effi ciency of buildings39 Energy management solutions applied to industry areas

3- Global management

of energy

42 Modular offer for residential and small industries energy effi ciency43 KNX modular energy effi ciency offer44 Wiser kit, RT2012 application45 iRio telemeter modular offer46 Energy effi ciency case47 Ventilation system48 Solar modular offer49 Instrumented solar panel bench50 Soleolis: solar panels and wind turbine51 SolEzy bench52 Tube solar water heater53 Solar water heater54 Lubio system55 Didalub: management of public lighting56 Heating control bench57 Development of the LV switchboard into the energy management switchboard58 Compensation of reactive energy bench59 Harmocem: electromagnetic disturbances60 Harmotris: three-phase network harmonic interference bench61 Minharmotris: harmonic interferences in three-phase installation62 Load terminals for electric vehicles64 Smart Grid application65 Photovoltaic installation, isolated and non-isolated site66 Vizelia offer67 Energy effi ciency case

4- Processes and machine management

72 Containment cabinet73 Industrial component wiring bench74 Motor starter packs75 Motor starter modular offer76 Training motors77 Motor starter bench78 Machine security modular offer79 Detection workshop80 Measurement and control bench81 ZigBee case81 Wireless, batteryless button pack and biometric button84 Speed controller and starter packs85 Educational controllers


Pages Educational solutions

4- Processes and machine management

85 Controller case86 Load bench87 Altivar speed controller training bench88 Powder brake speed controller bench89 Altivar 32 case90 Brushless motor case91 Axis X and Z test bench, asynchronous motor with fl ux vector control92 Axis Z test bench, synchronous or asynchronous servo-motor94 Mini hoisting system, ML03 cable winch95 Vertical displacement load test bench, SL02 cable winch96 SL71 lifting application test bench guidance by fl ux vector control97 Swing control system, SLT01 suspended load100 TSXBT control desk100 HMI case101 PLC packages102 Training PLCs104 Automation modular offer105 Automation modular offer, operative part106 RFID modules, card game107 RFID case108 RFID package108 Human - machine dialog pack109 ZELIO - GSM / Ethernet / Modbus pack110 Bac Pro wiring base plate, intermediate certifi cation111 Didafl ex baseplates112 Communication case113 Comsi case113 Communications case for teaching114 3D simulator115 Industrial shrink wrapper simulator118 Zelio case118 Traffi c management119 Lift119 Hanged cage surface treatment equipment120 Numerical axis121 Nivoreg: process control bench122 Xylophonis: Brushless axis123 2-axis laser machine124 Pneumatic manipulator with rotary base125 5 axis manipulator126 Formatris: automatic part sorting system127 "Pick and place" system128 Tapiris: Sorting belt129 Vision system, suitable for Tapiris or PLC130 Percetris: Automated machining system131 Hoist elevator132 Overhead gantry crane134 Productis: Integrated production system136 Industrial shrink wrapper packaging machine137 Industrial packing machine138 Industrial fi ller /screwer machine139 Accumulation table industrial machine140 Flexible packaging line141 Flexible dosage line142 Hydrolis: hydraulic unit143 Hydraulic lift144 Air treatment unit145 Air source heat pump

5- Products and

services

148 Design and operation of MV/LV networks laboratory150 Renewable energy and energy management laboratory152 Our publications152 Services153 Website154 Index by name156 Index by reference

6High and low voltage electrical distributionmanagement


High and low voltage

electrical distribution management

Medium voltage switchboards ......................................................................................................8

Communicating low voltage switchboard n .................................................................... 10

Low voltage switchboard for professional school .......................................................... 12

IT system cabinet and distribution boards ........................................................................ 13

IT system with fault search n ..................................................................................................... 14

Earthing diagram (ED) bench ..................................................................................................... 16

Protection selectivity bench ........................................................................................................ 17

Qualification test-bench n .......................................................................................................... 18

Habilis system ...................................................................................................................................... 19

Valhabilis n ........................................................................................................................................... 20

Additional electrical certification cabinet for the Habilis system n .................. 20

Securis case ............................................................................................................................................ 21

Products complying with the provisions ofof the European Directives

Compliance report available on request

All our products are delivered with: @ hard copy of the technical manual and practical exercise book @ a CD with the same documents in a PDF format and the PLC applications

www.schneider-electric.fr8

High and low voltage electrical distribution management

Educational solutions catalogue 2013-2014

Educational objectives

@ To discover and implement the equipment of an MV installation.

@ To learn the logging procedures. @ To operate and maintain an MV installation. @ To understand the C18-510 safety

requirements.

Electrical and mechanical features

@ Power supply: Simulation of the MV by a 400 V three-phase + Neutral + Earth

@ Dimensions (H x L x D) - weight: _ IM, QM units:

2380 x 375 x 940 mm - 130 kg _ DM1A modular unit:

2380 x 700 x 940 mm - 400 kg _ transformer:

960 x 670 x 1135 mm - 550 kg

Principal industries @ Training center

Other industries concerned @ Electrical engineering @ Maintenance engineering @ Mechanical engineering

Presentation of the kitThis equipment is intended to train on medium voltage, identify risks and develop interventions and procedures for medium voltage installations (modular units, transformers, low voltage switchboards, etc.).This equipment, implemented according to customer specifi cations, enables, according to the confi guration:

@ identifi cation of the different medium voltage distribution architectures @ understanding the electricity safety aspects needed to operate medium

voltage equipment @ discovery of the different types of disconnections @ study of the electrical features of medium voltage equipment: _ features of the equipment _ components constituting a modular unit _ implemented functions _ operating maneuvers _ teaching aid adaptation _ maintenance and recharge operations.

Medium voltage switchboards


Fuse compartment of the SM6 unit SM6 modular unit


Configuration example of a private industrial stationIM/QM offer:

@ a switch cubicle unit consisting of: _ a 400 A three phase busbar _ a disconnecting switch and 400 A grounding switch to shutdown and

isolate in the SF6 _ a CIT type manual control _ three voltage presence indicators _ three connection pads for a unipolar dry cable. @ a motorized fuse switch combination cubicle unit consisting of: _ a 400 A three phase busbar _ a disconnecting switch and 200 A grounding switch to shutdown and

isolate in the SF6. @ a gear motor 48 V CC, CI1 type containing : _ a MX type shunt release, 48 V CC _ an undervoltage trip, 48 V CC _ four contacts, 2 Open 2 Closed on the switch-disconnector _ a set of 3 Solfuse fuses with a 6.3 A striker _ a grounding switch downstream of the fuses connected to the upstream

grounding switch _ MV locking/transfo/LV-type C4 Profalux _ a series 20 Sepam relay.

IM/DM1 offer: @ a switch cubicle unit identical to the preceding @ a motorized DM1 circuit breaker unit consisting of: _ a 400 A three phase busbar _ a disconnecting switch and an upstream grounding switch to shutdown

and isolate in the SF6. _ a Fluarc type SF1 circuit breaker to cut in the SF6, 400 A caliber _ a circuit breaker control, RI motorized type _ a counter of mechanical operations _ A switch control, CS manual type _ three voltage presence indicators _ MV locking/transfo/LV-type C4 Profalux _ a Sepam series 40, T40 transformer protection.

Options: @ a Minera MV/LV transformer, 100 kVA @ a LV switchboard with a sealable circuit breaker @ security accessory kit consisting of: _ a 45 kV reach pole _ a pole to test voltage _ an AF 20B poster (care for those injured by electricity) _ a PR 11 station name plate _ a PR 10 plate on the door _ an insulating stool, 24 kV _ a window box for gloves _ a class 3 insulating pair of gloves _ a block of portable lighting _ 5 kg dry powder extinguisher.

Sepam 20

SM6 switch disconnectors

Transformer

To orderUEHGHTAppp : MV units according to customer specifi cationsUEHGTRppp : transformer according to customer specifi cationsUEHGACCppp: security accessories kit




Presentation of the kitThe LV switchboard or the energy management switchboard enables:

@ the distribution and control of electric power on a real installation, @ the performance of enabling tasks with an intervention on a busbar, @ the performance of measurements (I, U, P, S, Q...), @ discover the different industrial technologies used in a low voltage

switchboard (inverter, power meter, UPS, automation, load shedding...), @ organize and manage a site, @ modify an installation (add one or more starters), @ compensate for reactive energy.

This offer is available in 3 versions: @ standard version MD1AA730PE : _ a normal power supply (through the network) and a power supply

backup (through a second network or generating set), _ two fuse disconnectors and isolation components with 100 A visible load

break switch, _ two inverter circuit breakers from the motorized source, equipped with

an adjustable differential relay, _ a remote automated remote control integrated with an inverter, allowing

the transfer of sources according to a confi gurable sequence to ensure the continuity of optimum service (BA module),

_ two Powerclip busbars, _ two RCP phase control relays and a RCU voltage control relay, _ four pre-wired starters: a loadable 4-pole 63 A, a 3-pole 32 A, a rippled

single pole 4 A to power the supervisor, _ a Premium PLC (PL7 or Unity version) with web server coupler and

developed html pages that enable remote supervision and control. _ a 1 kVA inverter. @ version according to customer specifi cations UEHGTGBT: _ a normal inverter/motorized backup on the busbar, _ a set of starters and necessary protections upon customer specifi cation

(size, possible engine...), _ a power meter, _ a recovery system of the power factor, _ a Twido, Micro, Premium or M340 PLC ensure the centralization of

information through a Modbus and/or Ethernet connection, _ a human-machine terminal with touchscreen to confi gure or view the

condition of the installation, _ Supervision software (optional), _ an inverter (optional). @ Energy management switchboard version according to customer

specifi cations UEHGTGE : _ a normal inverter/motorized backup on the busbar, _ a set of starters and necessary protections to be specifi ed by customer

(size, possible engine) associated with the new range of energy meters and Acti 9 and Acti 9 Smartlink modular devices,

_ a iRio PLC linked to its software (optional reading of information on a tablet or smartphone),

_ a recovery system of the power factor.

Communicating LV switchboardEnergy management switchboard

High and low voltage electrical distribution.management

low voltage switchboard according to customer specifi cations Controller module of the energy management switchboard


Energy distribution @ To supply the terminal, industrial and small

service industry applications with electric energy.

@ To manage energy: tariff control and continuity of power supply. Communicate

@ To interact with the industrial or small service industry terminal applications (production systems, heating, lighting, fi re, intrusion).

@ To process the PLC and building information.

@ To centralize the alarms and faults on the operator terminal, PC or a web server according to the version.

@ To supervise and remotely control the production through an operator terminal, PC, tablet, or web server according to the version. Launch and maintain

@ To launch and maintain an operation. @ To perform the measurements.

Safety @ To train and assess the electrical skills of

the students. @ To analyze the professional risks.


@ Power supply: 400 V three-phase + Neutral + Earth

@ Dimensions (H x L x D) - weight:2500 x 1400 x 550 mm - 260 kg

Principal industries @ Electrotechnical engineering


Cabinets capable of being linked to the low voltage switchboardThe heating cabinet UEHGAA665CH consists of:

@ Prisma Plus enclosure equipped with a transparent door, @ a 4-pole 32 A general switch, @ Bipolar circuit breakers equipped with auxiliary contacts, @ A communication interface with the low voltage switchboard or the

Energy Management Panel, @ heating management through the KNX bus.

The lighting cabinet UEHGAA665ECL consists of: @ Prisma Plus enclosure equipped with a transparent door, @ a 4-pole 32 A general switch, @ three 4-pole circuit breakers for the protection of the different lighting

circuits, @ a bipolar circuit breaker that protects the power supply and the outputs

from the PLC or the communication device with the energy management panel,

@ ten bipolar circuit breakers for the protection of the different lighting circuits,

@ ten bipolar remote switches enabling the launch of the lighting zones. @ a Twido PLC for the remote management of the lighting zones through

the Modbus/Ethernet network (if Twido) or ZigBee (if energy management panel),

@ a junction box to the Modbus network (if Modbus network is used), @ the terminal blocks and junction splitters to the different lighting circuits.

The Twido or Micro interface box UEHGAA665INT consists of: @ an enclosure equipped with a transparent door, @ a remote controlled iC60 Refl ex type 4-pole circuit breaker, @ a bipolar circuit breaker that protects the power supply of the PLC, @ a Twido or Micro PLC enabling the remote launching of a system through

the Modbus/Ethernet network (only for the TGBT),A measurement kit MDGIRIOME can be proposed to reduce the information of the systems to be connected to the energy management panel (power, ZigBee communication module and energy meters to be installed in the system).Each low voltage switchboard/energy management panel comes with the RT 2012 guide "Analysis and Solutions" along with a white leafl et on energy effi ciency.

To order

MD1AA730PE: Standard version low voltage switchboardMD1AA739: compensation cabinet for the standard versionUEHGTGBT: low voltage switchboard according to customer specifi cationsUEHGTGE: energy management switchboard according to customer specifi cationsUEHGAA665ECL: lighting boxUEHGAA665CH: KNX heating boxUEHGAA665INT: Interface boxMDGIRIOME: measurement kit

Low voltage switchboard (standard)

Heating box Lighting box




Un-wired rear face

Package descriptionThis cabinet is used to:

@ perform cabling and accreditation tasks with intervention on busbars, @ take measurements (intensity, simple and composite voltages, active,

reactive and apparent power, power factor and phase order), @ take measurements using an oscilloscope and hook-on ammeter, @ distribute electrical energy on 6 separate feeders.

It can be supplied in a mounted, non-cabled version delivered with an accessories kit to carry out cabling operations.Proposed as an option:

@ accessories batch (wires, tags, cable ends and sheaths), @ tooling batch (screwdriver, clamps, allen keys).

In the workshop, the cabinet will be used to supply: @ systems separately, @ the spatial production area (3D cells), @ the panel-builders workstations, @ a lighting area, @ the cabinet cabling stations, @ the study zone with the microcomputers.

LV switchboard for professionalschool teaching

To orderMD1AA720 : cabled LV switchboardMD1AA720NC : non-cabled LV switchboardMD1AA728 : accessories kitMD1AA728P4 : accessories kit (Q = 4)MD1AA729 : tool kit

Teaching Objectives

@ To study the hardware of a main switchboard.

@ To control distribution. @ To manage energy.

Electrical andmechanical data

@ Power supply:400 V 3-Ph + ground

@ Size (H x W x D) - weight:2310 x 1000 x 530 mm - 214 kg

Main industry @ Electrotechnical engineering

This cabinet contains: @ a main power supply, @ a residual current device at the head and a

switch-disconnector with visible breaking, @ a busbar, @ a measurement unit equipped with a

confi gurable alarm device, @ an emergency stop device on the cabinet

and the possibility of remote installation of at least one other emergency stop point,

@ feeder control using ON/OFF pushbutton + indication,

@ connection of power supplies and feeders at the back of the cabinet,

@ cabinet access from the front and back (for exercises and accreditation),

@ a light beacon at the top to indicate power on, @ safety devices conform to current standards.


IT system cabinet and secondarydistribution boards

To orderMD1AA700TIT : IT system cabinetMD1AA700TDS : industrial distribution boardMD1AA700TDT : tertiary distribution board

IT system cabinet

Package descriptionIT system cabinetThis equipment is an electrical distribution cabinet equipped with four castors.It is used to demonstrate, through an IT isolated operation system, theprinciple of continuity of service for an installation as well as associatedmaintenance methods.It includes:

@ a 400 V/230-400 V 10 kVA three-phase transformer allowing an IT type earthing system (neutral isolated from earth) to be created,

@ three-phase feeders protected by 10 A circuit breakers, for connecting various other devices,

@ a TR22 permanent insulation monitor (PIM), to cover the principle of continuity of service of an installation as well as maintenance methods.The tertiary and industrial distribution boards are Prisma Plus modularswitchgear enclosures.Each enclosure is equipped with a master switch with external lock.The industrial distribution board is equipped with two 2-pole circuit breakersand four 3-pole circuit breakers, to protect the power supply of industrialsystems (machines, operating parts, etc.).The tertiary distribution board is equipped with six 2-pole circuit breakersto protect the power supply of tertiary systems (lighting, sockets etc.).These three cabinets (IT cabinet, industrial and tertiary distribution boards)are equipped with a Twido PLC centralising the state of the different feedersthrough the circuit breakers (open, closed or tripped).This information can then be sent to a concentrator PLC in a main LVswitchboard via the Ethernet network.

Teaching Objectives

@ To be used with the teaching LV switchboards to explore the different workshop architectures.

@ To create an IT isolated operation system. @ To have additional electrical distribution

feeders. @ To exchange information by Ethernet. @ To create the links with a networked LV

switchboard cabinet.

Electrical andmechanical dataIT system enclosure

@ Power supply:400 V three-phase + neutral + ground /




Presentation of the kitThe isolated neutral is the solution ensuring the best continuity of service in operation. For this reason, on can fi nd the IT earthing diagram in hospitals (particularly in surgery rooms), the electric grids of airport runways, in mines and premises where there is a risk of fi res or explosions, on boats and in all industries where a stoppage of operation would be costly or dangerous.

@ The IT cabinet system is made of a Prisma P type cabinet. @ The equipment for improved service continuity consists of a source

inverter (EDF source no. 1 and EDF no. 2) enabling the simulation of a loss of voltage along the "normal" source with automatic switching to the "emergency" source.

@ The cabinet can be equipped with an optional three-phase inverter with a battery life of 10 min.

@ The system is equipped with a 400 V/400 V transformer with a 10 kVA delta/star connection.

@ The cabinet is equipped with six feeders for the protection of electronic circuits.

@ A permanent insulation monitor communicating with automatic fault search along the 6 feeders enables the recovery of the available information under supervision.

@ Each feeder is equipped with a terminal plate for the measurement of current and voltage.

@ Screen printing representing the electrical diagram of the cabinet with measuring points for a short circuit current and the potential contact voltage.

@ A system of fault simulation is provided on 5 feeders. The selection of the feeder is performed using a switch.

@ A simulation system of the second fault with a limitation of the short-circuit (simulation of two types of faults: short-circuit and leakage current).

IT system with fault search


IT system cabinet


@ To present and discover the system (research and analysis).

@ To remind the E.D. (earthing diagram) @ To launch the IT system (in conformity with

NF C 15-100). @ To connect a feeder to the system. @ To search for an isolation fault. @ To connect a differential to a feeder. @ To confi gure an insulation monitoring

device. @ To confi gure the communicating systems. @ To communicate with an ETG100 module. @ To use monitoring software (optional).


@ Power supply: 400 V three-phase + Neutral + Earth



Other industries concerned @ Electrical engineering @ Industrial science and technology

industries


List practical exercises provided: @ Practical exercise 1: presentation and discovery of the system (research

and analysis), @ Practical exercise 2: Reminder on the E.D. (earthing diagrams), @ Practical exercise 3: the commissioning of the IT system (in conformity

with NF C 15-100), @ Practical exercise 4: connection of a feeder to the system (measurement), @ Practical exercise 5: fi nd an isolation fault without the "locator" (use

measuring devices), @ Practical exercise 6: fi nd an isolation fault with the "locator", @ Practical exercise 7: installation analysis upon the occurrence of a

second fault, @ Practical exercise 8: connecting a differential to a feeder, @ Practical exercise 9: confi guring an insulation monitoring device @ Practical exercise 10: confi guration of the communicating systems

(Ethernet, Jbus), @ Practical exercise 11: communication with the ETG100 module (use of

the communication page). Use of monitoring software (communication with the XLI module through the ethernet fi eldbus gateway) to verify the different addresses of defects and settings.Comments:

@ The practical exercises include the "answer" documents for the students and correction for the teacher,

@ the monitoring software is not included in the offer, @ the measuring equipment software is not included in the offer, @ the cables necessary for the use of the installation are included.

To order

MD1AA710: IT system cabinetMD1AA719: an optional inverter

Practical exercise 6: student document

Practical exercise 6: teacher's document




Package descriptionThis bench demonstrates the reasons for decrees, regulations and thestandards in force for the protection of persons in the various earthingconnection diagrams (TN, TT and IT regimes).It contains 2 working faces:

@ one face to study the TN and TT regimes, @ one face to study the IT regime.

Each face includes: @ a distribution architecture diagram on each side, @ three single or 3-phase receivers (represented diagrammatically and

simulated by charges installed in the bottom of the bench), @ protection by thermal magnetic or differential circuit breakers, @ differential switches and contactors, @ power resistors in the base of the bench connected to safety sockets, @ a set of fl exes with safety plugs, @ a permanent insulation monitor for IT status (IM20 or XM200).

The permanent insulation monitor is used to measure overall mains resistance and its earth capacity.In version XM200, XD301 sensors built into the structure are used to detect faults automatically.

Earthing diagram (ED) benches

Bench XM200 IT face Bench TT TN face

Search kit

To orderMDG99603 : version XM200MDG99605 : version IM20MDG99609 : fault search kit for IM20

Teaching objectives

@ To study the theory of neutral point connection.

@To highlight the basic rules for protection of low voltage distribution in each earthing diagram (neutral point connection).

@To enable automatic detection of a faulty starter unit (version XM200).Electrical andmechanical data

@ Power supply:400 V (3-phase + neutral + ground) /


Protection discrimination bench

Package descriptionThe training bench for studying discrimination between protective devices in low voltage distribution systems demonstrates the notions of current and time discrimination.It promotes understanding of:

@ how to use an adjustable residual current relay with separate current transformer,

@ the causes and effects of short-circuit currents, how to calculate them and select the appropriate protection,

@ the operating principles and characteristics of a thermal magnetic circuit breaker,

@ using and tracing a tripping curve for a given rating, @ the simulation of situations of total discrimination, partial discrimination

and non-discrimination, @ the study of the notions of discrimination on 2 or 3 stages and their

consequences and effects on an installation, @ the choice of earth fault loop impedance by induction coils of controllable

values, @ the simplifi ed presentation of breaking by a very low voltage electric arc

and limitation of short-circuit current.

To orderMDG99610 : discrimination bench

Teaching objectives

@ To understand how thermal magnetic circuit-breakers work (tripping curves and breaking capacity).

@ To implement discrimination between upstream and downstream protection.

@ To understand the causes and effects of short-circuit currents.


@ Power supply:230 V single phase + ground /




Qualification test-bench

Presentation of the packageThis bench was developed by Schneider Electric to prepare for the certifi cation of non- technicians, following the development of standardNF C 18-510.It consists of a service industry side and an industrial side, all mounted on a chassis with wheels.There are two versions: bulk (an already assembled chassis) or cable mounted.It enables training regarding electrical hazards on LV works or installations (BC, BR, BS, BE, B0V, B1N, B1T, B1V, B2N, B2T and B2V accreditations).OperationThis equipment is composed of the two sides:

@ the housing-service side allows for simple electrical operations; intervention regarding a socket, bulbs and Block Autonomous Security Lighting This side is equipped with a residential service duct and an EDF mounting plate and modular enclosure,

@ the industrial side, which enables work on the exposed parts with voltage (by removing the cover of the distributor), consists of:

@ a motor starter box for operation in two directions with a control box, @ an electric motor driving a ball screw that operates two limit switches.

This bench enables : @ a connection intervention in the vicinity of the voltage, @ settings and measurement interventions, @ connection and replacement interventions, @ interventions due to a defect on a control and power circuit, @ the commissioning of equipment.

Comments : @ the cable mounted version is fully assembled and ready to use, @ the bench in both versions is provided without educational support, @ A VOM and PPE version is ordered under the reference number

MD1AA639, @ engine and drive version is available.

To orderMD1AAHABILAV: motor qualifi cation bench and cabled ball screwMD1AAHABILAVNC: motor qualifi cation bench and non-cabled ball screwMD1AAHABIL: motor qualifi cation bench and cabled driveMD1AAHABILNC: motor qualifi cation bench and non-cabled driveMD1AA639: VOM and PPE batch

Industrial side Housing-service side


@ To understand and identify electrical hazards by non-electricians.

@ To constitute B0, B1, BR, BS and BE interventions.


@ Power supply: 400 V tree-phase


Principal industry concerned @ Electrical engineering

Other industries concerned @ Building industry


Kneader Automated systemcontrol desk

Package descriptionThis industrial equipment is designed for applying the regulations, procedures and work methods to qualify for a certifi cate in electrical hazards skills in compliance with European Community regulations.Based on an industrial kneader model, the equipment is used to study a typical technical system in the food industry implementing a process which may require uninterrupted operation.Main cabinet with control boxMounted on an aluminium rail structure with wheels and stabiliser feet, it includes:

@ externally controlled padlocking isolator, padlocking circuit breaker, @ power distribution by busbars protected by a removable screen, @ 24 V AC control and signal circuits, @ three padlocking starter units: _ blade motor starter (Altivar speed controller backed up by a

single-phase UPS), _ cover motor starter (reversing contactor), _ heating starter unit, @ freestanding for mounting and wiring an extra circuit.

Kneader operating sectionThis small-scale industrial kneader is designed for maintenance operations(sensor adjustment, motor terminal verifi cation) and develops a torque of 3.64Nm at full load.The kneader includes:

@ a device to open and close the tub lid, @ a kneading blade, @ heating by electrical elements, @ sensors and detectors required for operation, @ two 90 W motors, (blade rotation and lid opening).

PLC panelThis is equipped with:

@ Magelis operator dialogue panel, @ a TSX Micro (TSX37-22) or M340 PLC for kneader speed and ingredient

heating cycle control.NV and PPE kitOptional kit with a multimeter (NV), padlocking device, beacon, tools and personal protection equipment (PPE) (gloves, face guard) to work in compliance with safety standards.

Habilis system

Enclosure

To orderMD1AA513 : cabinet and control boxMD1AA514 : kneader operating sectionMD1AA516 : TSX Micro control deskMD1AA518 : NV and PPE kitMD1AA516MR : M340 control desk

Teaching objectives

@ To undertake practical exercises relating to tasks requiring electrical skills and complying with UTE C 18-510 regulations.

@ To understand the problems of padlocking in industrial systems.

@ To carry out maintenance and repair operations in the electrical cabinet.

@ To study an industrial system.


@ Power supply:400 V DC 3-phase + neutral + ground /1 kVA

@ Size (H x W x D) - weight: _ main cabinet:

2060 x 900 x 650 mm - 165 kg _ operating section:

600 x 600 x 600 mm - 43 kg _ PLC panel:

1150 x 340 x 430 mm - 15 kg

Main industry @ Electrical engineering

Other industry @ Mechanical engineering




Valhabilis

Presentation of the kitThis system consists of two complimentary cases, representing an electrical installation. They allow to tackle electrical hazard issues for the non-electrotechnical courses.The fi rst case contains three outputs that are provided with mesuring operations, connections and bulb replacement.The second case supplied by the fi rst one allows the implementation of controls and electrical maintenance using a motor starter.An optional kit contains a non-voltage multimeter (VOM), a logging device, and PPE (Personal Protective Equipment) - insulating gloves and a face guard - can be used to perform operations in compliance with the relevant security standards.

Additional electrical certification caseFor the Habilis system

Presentation of the kitABS case containing:

@ a cable gland plate protected by a 10 A circuit breaker that can be replaced by a 2P + Earth,

@ a lighting output protected by a 10 A fuse, @ A socket for bulb replacement.

A set of fi ve 2P + Earth sockets, a bulb, fuses and two logging devices is supplied separately.Comment:This case be added to the Valhabilis MD1AA630 cases available already on the market, the Habilis system and can also be used alone independently.

To orderMD1AA630: ValhabilisMD1AA639: Batch VOM and PPEMD1AG630: Valhabilis with batch VOM and PPE


@ To train for level B0, B1, BE, BS, B1V and BR operations following the newNF C 18-510 standard.

@ To perform basic tasks at low voltage.


@ Power supply: 230 V single phase, 10 A

@ Dimensions (H x L x D) - weight: _ Electricity distribution case:

450 x 460 x 290 mm - 10 kg _ Motor starter case:

450 x 460 x 290 mm - 12.5 kg

Principal sector concerned @ Mechanical engineering

Other industries concerned @ Civil engineering @ Industrial technology


@ To perform the certifi cation tasks of the BS, B0 and BH level with the Habilis system, following the new NF C 18-510 standard.

@ To implement routine operations on low voltage installations.


@ Power supply: 230 V single phase + Earth

@ Dimensions (H x L x D) - weight:230 x 300 x 120 mm - 2.5 kg(without mounted bulb)

Principal industries concerned @ Electrical engineering @ Thermal and HVAC engineering

To orderMD1AA638: BS certifi cation case for Habilis


Securis case

Package descriptionThe Securis case is designed to highlight the issue of safety.This educational tool illustrates safety system operation through practice:

@ electrical safety, @ machine safety, @ protection of equipment and personnel.

Securis is a kit built into a demonstration case with a transparent cover so that all the different components are visible.This enables students to learn how the different products operate and whattheir role is in the safety circuit.Securis simulates a machine with a safety door which enables the protection functions to be studied in the following contexts:

@ power failure and restoration: _ emergency stop circuit, _ automatic power supply. @ opening the cover during operation: _ role of the limit switch, _ machinery directive. @ insulation fault and contact with a live part: _ studying a thermal magnetic circuit-breaker, _ studying a residual current circuit-breaker.

Securis includes all the cables needed for its use.

To orderMD1VSE1F : Securis case

Teaching objectives

@ To make students aware of the issue of safety.

@ To explain how safety devices (residual current circuit breaker) work to counter electrical and mechanical hazards.


@ Power supply:230 V single phase + ground / 40 VA

@ Size (H x W x D) - weight:520 x 380 x 150 mm - 7 kg

Main industries @ Electrical engineering @ Industrial technology

22

Building management


Building management

Residential and small service industry offer ...................................................................... 24

KNX modular offer .............................................................................................................................. 26

KNX case n .............................................................................................................................................. 27

KNX panel n ............................................................................................................................................ 28

Minibat, instructional mini building n ..................................................................................... 29

KNX pack .................................................................................................................................................. 30

Odace radio frequency discovery kit n ................................................................................. 31

Alvidis case .............................................................................................................................................. 32

Addressable fire security bench n ........................................................................................... 33

VDI 19 pack ........................................................................................................................................... 34

BAES Dardo Plus case n .................................................................................................................. 35

HD network camera, PELCO security imaging pack n ................................................. 36

Modular offer and kit for the modeling and prototyping n ....................................... 37

Instruction of the energy efficiency of buildings n ........................................................ 38

Energy management solutions applied to residence

and small industry areas n ............................................................................................................ 39





Building management


Presentation of the entire modular offerThe residential and small service industry modular offer allows you to studyand install the components of an electrical installation for the residential and small service industry.The offer contains the most commonly used products in the home, adapted for training purposes in box kit form.Three different training kits are available for learning and using the main functions encountered when building electrical installations.These kits are of increasing complexity and complement each other:

@ the fi rst kit allows you to create the functions encountered in 1 or 2-room housing,

@ the second kit, made up of products supplementary to the fi rst, is used to demonstrate the functions encountered in 3-4 room housing,

@ the third kit, also made up of products supplementary to the fi rst two, covers the main functions encountered in a small service industry building.

Residential and small service industry pack offer

description 1 or 2 rooms 3 ou 4 rooms small serviceindustry

reference

MD1AM6121 MD1AM6122 MD1AM6123

DB90 500 mA circuit breakerpanel module with tariff meter

1 MD1AM6001

1P+N 10 A circuit breakermodule - 20725

3 1 1 MD1AM6002

1P+N 16 A circuit breakermodule - 20726

1 1 4 MD1AM6003

RCD module1P+N 16 A /30 mA - 20553

2 2 MD1AM6004

RCD module1P+N 20 A /30 mA - 20554

1 MD1AM6005

impulse relay module with built-infunction 16 A, 230 V AC - 15518

1 MD1AM6006

impulse relay module with centralcontrol - 15510+15409

1 MD1AM6007

programmable time switchmodule - CCT16652

1 MD1AM6008

modular contactor module2F 25 A - 15379

1 4 MD1AM6009

Min'clic 1 - 7mm time-delay switchmodule, 16 A, 230 V AC - 16655

2 MD1AM6010

switch-off warning module - 15376 1 MD1AM6011light-sensitive switchmodule type IC200 - 15284

1 MD1AM6012

CDS single-phase load-sheddingcontactor, 1 channel - 15908

1 MD1AM6013

Alcyon 2-way switch - ALB74020 5 2 MD1AM6014Alcyon single pushbutton - ALB74030 6 MD1AM6015Alcyon simple illuminated pushbuttonmodule - ALB74035

3 MD1AM6016

Alcyon double pushbuttonmodule - ABL74080

1 MD1AM6017

Alcyon 10/16 A socket module, 2P+E 4 2 MD1AM601815 W bulb holder module 4 5 MD1AMP004support frame 1 1 1 MD1AM000

For ease of use, each component is built into a box where each connection is made using safety sockets.

Incoming circuit breaker Circuit breaker and Vigi

Teaching objectives

@ To study and install the components of a domestic and small service industry electrical installation.


@ Power supply:230 V 50 Hz / < 15 A

@ Dimensions of storage boxes(H x W x D) - weight:470 x 430 x 250 mm - 20 kg

Main industry @ Civil engineering

Other industry @ Electrical engineering


Presentation of the pack contentsThis pack is designed for studying, installing and wiring the components of an electrical installation for the residential and small service industry.quantity description reference1 Opale switchboard for circuit breaker 132171 Opale switchboard with 3 rows of 13 modules 134031 incoming circuit breaker 131201 tariff meter C 10005 10 A circuit breaker 207256 16 A circuit breaker 207264 30 mA, 16 A residual current circuit breaker 205532 30mA, 20 A residual current circuit breaker 205541 16 A, 230 V AC impulse relay with built-in function 155181 impulse relay 155101 impulse relay auxiliary (15510) for centralised control 154091 programmable timer switch CCT166525 25 A 2-pole contactor 153792 time-delay switch 153631 switch-off warning 153761 light-sensitive switch 166521 load-shedding device 159087 Alombard 2-way switch ALB740206 Alombard pushbutton ALB740303 Alombard illuminated pushbutton ALB740351 Alombard double pushbutton ALB740806 Alombard socket 2P + E 10/16 A ALB7420050 Alombard blue fl ush-mounting box ALB7132010 Alombard central socket box kit ALB7183710 E27 plug socket ALB68010

Overview

To orderMDG99120 : residential and small service industry packMD1AM6121 : 1 to 2-room housing training kit with support frameMD1AM6122 : 3 to 4-room training kit with support frameMD1AM6123 : small service industry kit with support frameMD1AM6126 : all kits MD1AM6121 to MD1AM6123

Residential and small service industry pack

2-way switch


Building management


Package descriptionThe KNX bench and kits are used to demonstrate the latest intelligent home solutions:

@ building management, @ utility management and control.

The kits are made up of the most currently used KNX products. These components are adapted for training purposes in box kit form installed on an aluminium rail.The products included in the kit are used to perform functions such as:

@ control of roller blinds, @ control and dimming of lighting, @ control of actuators from pushbuttons.

Products comprising the basic bench MD1AM3BAdescription bespoke referencebus power supply module MD1AM3001system coupler module MD1AM3002switch actuator module with 4 outputs MD1AM3003module with 4 binary inputs 230 V MD1AM3004dimming actuator module MD1AM3005programmable timer module MD1AM3006USB interface module MD1AM3007roller blind actuator module MD1AM3008Artec dual control module for white roller blind MD1AM3009Artec 8-key multifunctional module with IR + faceplate MD1AM3010Artec 4-key multifunctional module + faceplate MD1AM3011trancent touch-sensitive control module MD1AM3012complete movement detector module + faceplate MD1AM3013interior presence detector module MD1AM3014module with 2 binary inputs MD1AM3015support frame MD1AM000two 15 W bulb holders MD1AMP004electric roller blind MD1AMP007single-phase protection module MD1AM2001USB2 programming cable -ETS Pro software -fi ve ETS Trainee licences -

Other modules, not included in the basic bench, are also available.

KNX modular offer

Overview

Output module

Switch

To orderMD1AM3BA: KNX bench

All these elements are interconnected by theKonnex bus which complies with the internationalISO/IEC 14 543-3 standard.Functions are confi gured using ETS 3 software(included in the kit) installed on a PC.This equipment is designed for studying andinstalling KNX products.

Teaching objectives

@ To analyse the functions and principles of a home automation installation on Konnex bus.

@ To wire the components. @ To confi gure the system based on different

scenarios.

Electrical and mechanical data @ Power supply:

230 V single phase + E / 200 VA @ Size (H x W x D) - weight:

780 x 650 x 1200 mm - 50 kg

Main industries @ Electrotechnical engineering, energy,

home automation

Other industry @ Electronics


Presentation of the kitThis case enables the study and implement the components of an electrical installation for a building industry and small commercial establishment, taking into account the economic and energy management aspects raised by the use of KNX bus system components.This case consists of:

@ An on-off lighting control actuator module, @ A lighting variation module, @ a module for a rolling shutter, @ a USB interface module, @ a TCP interface module.

The diagram of this case represents an apartment. The rolling shutter is simulated by LEDs.Operation:

@ programming use of ETS 4 software via a USB or TCP interface, @ realization of on-off lighting control with white LEDs, @ variation of the control of a 15W bulb, @ implementation of centralized control, @ control of the electric rolling shutter.

CommentsProvided with ETS 4 Lite software.Case comes with technical documentation, without educational support.

KNX case

To orderMD1AVKNX: KNX case


@ To understand and master the control functions of the lighting and rolling shutters with the KNX bus.

@ To master the ETS 4 software tool for the design and commissioning of a KNX project.

@ To optimize energy consumption through the use of suitable products.


@ Power supply: 230 V single phase


Principal industries @ Energy and environment technical high

school @ High school engineering science

Other industries concerned @ Electro-technical industry @ Maintenance industry


Building management


Presentation of the kitThis equipment is made up of two educational panels with junction connectors and cards for a 230 V power supply and KNX bus.

@ The main panel represents a conference room that assemble applications involving lighting, access control and heating (radiator optional). It includes:nameDT40N 1P 10A curve C 6kAOpale enclosure, 2 rowsUSB-DIN interface8 aluminum M-PLAN push buttons2 simple aluminum platesM Plan interior motion detectorActuator 2X230V 10ADALI gateway with web serverpower supply for 160mA busActuator 2X230V 16A4 X aluminum ARTEC multifunction pushbuttonpower supply CC 24V 0.4AIP routerdimming actuator for light bulb module for aluminum push buttonM-Plan simple aluminum plateelectric keypad latch set of Halogen, compact fl uorescent and LED lights

@ The panel application "sun tracking"(1) representing a relaxation area. It includes:nameelectric Venetian blinds with adjustable stripsblinds actuator 2X 10Amodule for the 2 M-PLAN push buttonsaluminum M-PLAN double handlesimple M-PLAN aluminum platemultifunction weather stationActuator 2X230V 16Aaluminum ARTEC multifunction pushbuttonsimple ARTEC aluminum plateDT40N 1P 16A curve C 6kAOpale enclosure, 1 rowinterior motion detector (1) Cannot work except by connection with the preceding panel.

Possibility to develop tablet applications.

KNX panel

To orderMDG99DOMKNX: a complete set of 2 panels comes with a ETS4 Lite license dongle.MDG99DOMKNXLITE: the access control-lighting application panel comes with a ETS4 Lite license dongle.MD1AMP010: Educational radiator 2kWNon contractual photos.

Venetian blinds management panel

Lighting and control access control panel

Educational radiator


@ To understand the building management and the optimal management of energy.

@ To implement scenarios similar to a real context.

@ To introduce to ETS4 programming.


@ Power supply: 230 V single phase + Earth

@ Dimensions (H x L x D) - weight:Dimensions 400 x 600 x 250 mm - 20 kg

Principal industries @ Energy and environment engineering

Other industries concerned @ Electrical engineering @ Civil engineering


Presentation of the kitMINIBAT is the mini instructional building that provides an example of energy management through the regulation of temperature and lighting.This system enables the discovery, design and implementation of an automated system (heating, lighting, control of motorized opening, access control) where the management and control is done via the KNX bus, standard compatibility and unique interoperability in the areas of automation and technical management of the building.The system enables:

@ the discovery of the features and implementation of the operating components on the KNX bus,

@ concept discoveries in addressing different equipment (physical addressing of the participants),

@ confi guration implementation, via the ETS4 software, of the system's components.Minibat is composed of two 2 zones:

@ zone 1: light control with halogen spotlights, rolling shutters, presence detector, light dimmer switch...

@ zone 2: thermal regulation of theradiator, fan, timer, and temperature sensor...

Minibat is controlled using a 7 inch touchscreen.A TCP/IP interface enabling remote control using a PC or a tablet.

Minibat Instructional mini building

To orderMDG993EB: instructional mini building


@ To understand the concepts of energy effi ciency.

@ To optimize energy consumption through action relating to lighting and heating.

@ To confi gure an installation for the purpose of the optimization of energy consumption.

@ To control in an automated manner the necessary lighting and heating.




Principal industries @ Energy and environment engineering @ Electrotechnical engineering @ Digital Electronic Systems engineering

Other industries concerned @ Electrotechnical engineering @ Electrical Engineering and Computer

Science


Building management


Presentation of the kitKNX solutions are based on a communication bus that is only to be installed in parallel with the power line to serve both the user interfaces (push buttons, control station, touch screens), but also the sensors and actuators will turn the building into a performing building.Among the industries where it is common to fi nd such solutions that we may include administrative buildings and service industries, commercial buildings, schools, sports and cultural complexes, hospitals and long term care residences, hotel resorts and upscale residences.The most common applications addressed by KNX solutions are lighting, heating, ventilation, air conditioning, control of openings (shutters and rolling awnings), taking into account time management zone, the presence of an occupant , the weather and interfacing with the most popular networks on the market (TCP-IP, for example).The MD1AAKNXVR educational pack enables the discovery of the KNX system.Its 7 inch touch screen and specifi c actuator for the roller shutters or Venetian blinds can, among other things, enable an understanding of all of the features of KNX bus and address the principles of energy effi ciency.It includes:nameKNX 320 mA power supplyUSB interfaceIP router2 M-PLAN push buttonsDBL H-B M-PLAN plateM-PLAN aluminium fi nishing plate8 aluminum ARTEC push buttonsinterior motion detector + infrared7" screenwhite embellishment kitexterior white embellishmentswitch actuator, 4x230V-16A dimming actuator, 4x150W1 set of cable connectors1 DALI gatewayrolling shutter actuatorOpale enclosure, 3 rowsOpale transparent door differential circuit breaker 30mA 10A2 sets of 2 terminal 8 holes ph-N

@ This package comes with the ETS4 Lite implementation software. @ Rolling Venetian blinds with adjustable strips are optional.

KNX pack

To orderMD1AAKNXVR: KNX packMD1AASTORE: Venetian blinds MD1AAVOLETR: Rolling shutterRolling shutter Venetian blinds


@ To analyze the features and concept of an automated installation on the Konnex bus.

@ To perform the wiring of the components. @ To implement the system settings

according to different scenarios. @ To understand the concepts of energy

effi ciency.

Principal industries @ The STI2D diploma. @ Electrical engineering

Other industries concerned @ Energy engineering @ Civil engineering


Presentation of the kitThe Odace pack is made up of wireless products using RF (radio frequency) technology. Solutions that are easy to implement enable centralized control of rolling shutters and/or a wireless two way switch.This equipment package is composed of the products below:

@ A light receiver with dimmer. This RF lighting module allows the remote control of a ceiling lamp and the varying of its intensity

@ Mobile RF outlet with controller. It allows remote control of lamps or devices that are connected to it.

@ Combined controller without neutral with dimmer. This combined controller is both a transmitter and a receiver. This module is used to replace an existing switch. The lamp to which it is connected can be controlled locally or remotely. It is used to control the receivers. It can be mounted either on 2 or 4 poles.

@ Remote control. It allows you to command the various receivers. With 8 channels for the standard version. It is connected through programming in simple mode or scenario mode to Odace products.

@ 2 transmitters with centralized control for the roller shutters enable local or remote control with a centralized roller shutter function.

@ 2 battery operated push button transmitters. @ White embellishment kit. @ 4 white Design plates. @ A universal transmitter and receiver.

The transmitter is connected to a push button.The receiver controls the load connected to it.

Odace radio frequency discovery kit


@ To understand an apparatus used to control a lighting system or rolling shutter using RF.

@ To program a transmitter and receiver. @ To discover the benefi ts of radio frequency

control.


@ Power supply: 230 V single phase + batteries (provided)


Principal industry @ Electrical engineering

Other industry concerned @ Home automation

To orderMDG99ODACE: Complet Odace kit

Wireless control

RF receiver Remote control


Building management


Presentation of the kitAlvidis connects the residential distribution to all media (telephone, television, internet) to RJ45 terminal outlets. This solution is very simple for the end user: "I connect, it works."The Alvidis case forwards to:

@ discovering different media distribution solutions in a dwelling, @ study and implemention of telephone, computer and television solutions

on RJ45 sockets based on concrete specifi cations.It is equiped with an IP camera enabling the development of network and remote access using internet.The automatic Alvidis case consists of:

@ an 8 port automatic Alvidis, @ two RJ45 sockets on supports, @ a 4 + 1 port switch module, @ an ITD (end of the line), @ a tripler, @ a telephone fi lter, @ an IP camera, @ the cables to connect a telephone, television and a PC.

Alvidis case


@ To analyze and implement different media distribution solutions in a residential environment or small business.

@ To implement the system settings in different scenarios.

@ To study and confi gure an IP camera.


@ Power supply: 230 V single phase + Earth / < 150 VA

@ Dimensions (H x L x D) - weight:503 x 602 x 195 mm - approximately 14 kg

Principal industry @ Home automation @ Electronics

Other industry concerned @ Electro-technical

To orderMD1ALVIDISA: Alvidis case


Presentation of the kitThis teaching equipment "Addressable Fire Security System" consists of a monoblock mobile structure. On the front is shown a portion of an establishment that receives the public (e.g.: a summer camp).It includes the various required components:

@ to take into account the information (automatic detectors and manual releases),

@ to process informations (equipment control, signaling and reporting chart),

@ to manage alarms and security settings (siren and centralizing of the fi re safety setting with the safety actuated device)These components are located in different parts of the represented building.All connections are found on the secure sockets enabling fast quick wiring without tools.The set of components on the equipment meets current standards in force.

OperationFour practical exercises are offered:

@ Practical exercise 1: Implementation and recording @ Practical exercise 2: Use of a fi re security system, @ Practical exercise 3: Confi guration of a fi re security system (local mode), @ Practical exercise 4: Confi guration of a fi re security system (remote

mode).

Addressable fire security bench

To orderMDG99130A: Addressable fi re security bench


@ To study a fi re security system. @ To study and implement the standards and

regulations relating to fi re safety system. @ To cable, confi gure and program of the

controling and signaling equipment. @ To do preventive maintenance of the

system components. @ To do corrective maintenance of the system.



@ Dimensions (H x L x D) - weight:1930 x 600 x 1070 mm - approximately93 kg

Principal industries @ Electronic engineering @ Electrotechnical engineering

Other industry concerned @ Electrical engineering


Building management


Presentation of the kitThe VDI 19 pack highlights the general organization of a VDI network.It enables the discovery of the functions of the components (splitters, PBX, inverter, switch), the principles and standards to implement the various cables used in VDI, cabling of the RJ45 connectors, and the cabling and wiring of a patch bay. The pedagogy is based on actual specifi cations.VDI 19 pack: MD1ALVDIC 19 quantity name24 FUTP cable, Cat 6 300MHZ 1 m1 19" panel, 24 points 1 telecom panel, 50 ports 1U1 panel with 8 outlets with illuminated switch 1U1 shelf (1U), 250mm depth (15kg max)5 blank sealing panel (1U)3 cable guide panels, 19" 2x1U24 connecting rings 600x6001 case, 19" with fi xed body, glass door 12U1 rear sealing panel1 sealing panel with air vents1 sealing panel with brush strip1 telecom connection tool1 sealing shutters, blue1 sealing shutters, green1 kit for the grounding of cylindrical lugs1 inverter, APC Smart-UPS 1500VA USB & Serial RM 2U 1 kit, Rack 2U for inverter1 Switch, 24 ports, administrator level 2, 10/100

Options of the VDI 19 pack: @ a private automatic branch exchange MD1AE849, @ 2 x 4 twisted-pairs cable 500 m, cat 6 VDIA11204SH, @ Optiline duct pack MD1ALOPTILINE includes:

quantity name12 ducts and accessories4 blocks of 3 outlets 2P+E with mechanical polarizing4 blocks of 3 outlets 2P+E standard24 supports for RJ45, blue24 supports for RJ45, green24 core, RJ45 slim cat. 6 plated

VDI 19 pack


@ To study the VDI functions encountered in industrial or tertiary installations.

Principal industry @ Electrical engineering

Other industry concerned @ Civil engineering

To order

MD1ALVDIC19: VDI 19 pack

VDI pack


BAES Dardo Plus caseAddressable security lighting system

To order

MDGVBAES: BAES caseMDGBAESPCK: handheld testerMD1APESADR: BAES product pack delivered separatelyMD1APESPRT: printer option for the pack


@ To study an addressable security lighting system.

@ To confi gure and control remotely by a web server.

@ To identify and test the system components.




Principal industries @ Electronic engineering @ Electrotechnical engineering

Presentation of the kit:The addressable system Dardo Plus offers features that go beyond the centralization/automation of the testing required by the EN 50172 standard.Easy installation and addressing:

@ ease of wiring, @ easy installation in an enclosure or DIN cabinet, @ simple addressing using two rotary knobs on each fi xture, @ there is no risk of error with the address testing device (test the

addresses and identify duplicates and missing ones).Automated and remote testingCentralize and automate the mandatory controls of the security lighting installation (in compliance with the EN 50172 standard).Each block is tested according to the addressing plan.Tests without power interruption.Identifi cation of components to replace (test reports).Test report available immediately on a PC, the control unit or printed (Dardo Plus Printer or offi ce printer).Maintenance alert via e-mail or SMS (DCM interface) or the technical management system of the building (DLM interface).This case enables the study of the management of an addressable security lighting installation of buildings.Fully scalable system, with the possibility of remote monitoring, SMS and/or e-mail alert (optional), direct integration in LON environments.Includes:

@ This case is composed of a Dardo Plus controller, a DCM communication module, a BAES A-EVAC IP 42 with LED, a fl uorescent BAES A-AMB IP 42, a 24 v power supply and a printer for the test reports required by standard EN 50172,

@ spotlights to simulate real lighting.

Kit offerThis offer is available in a kit consisting of:

@ 1 control unit, @ 1 BAES EVAC IP 42 with LED, @ 1 halogen 12 v spotlight, @ 1 BAES AMB IP 42, fl uorescent, @ I DCM communication module @ 1 24 v power supply, @ 1 Dardo Plus Printer.

Comments @ The practical exercises include a student document and a teacher's

document. @ Possible BAES external additions possible.


Building management


Presentation of the kit @ The extended platform (EP) camera pack is designed for quick

installation. @ The built-in analytics and other advanced features meet the needs of the

most demanding security applications. @ The camera uses a standard web browser for its extended confi guration

functions and remote administration. @ The PELCO system of analytical solutions can detect specifi c types of

activities and automatically trigger alarms. @ Camera sabotage function. @ Movement management, abandoned object, object counting and object

removal. @ The "Adaptive movement" feature of the PELCO system detects and

tracks objects that enter a user-defined zone and can trigger an alarm.Includes:

@ 1 Extended platform (EP) high-defi nition camera and its adjustable mounting,

@ 1 13M series varifocal lens for the camera network, @ 1 Mini IP dome camera system and its mounting, @ Freely downloadable DS NVs software including 4 licenses for the

PELCO camera or those of third parties, @ 1 Ethernet switch and the necessary cables for proper functioning.

Benefi ts: @ use of a PC or screen with an S-video input and BNC + VGA, @ open architecture, @ day/night model equipped with a mechanical infrared fi lter that increases

sensitivity, @ ability to view up to 4 cameras.

19" monitor option MD1PELCOMONIT: @ LCD TFT PMC319A, 1280x1024 resolution, @ inputs S-Video and BNC + VGA, @ reduced congestion, fl at panel design, @ maximum brightness of 380 cd/m2, 500:1 contrast ratio, @ 100 to 240 V single phase power, 50/60 Hz, @ 3 year warranty

Key + power supply option MD1PELCOCLAV: @ key to control the dome, @ automatic detection in CM6700/CM6800 and Direct P modes, @ automatic scanning / random / image.

Outer casing option MD1PELCOEXT: @ EH1512-3MTS case, @ 230 V single phase power supply @ complies with IP 66 & NEMA 4X norms, @ 3 year warranty, @ comes with its own support.

Recorder option MD1PELCOHARD: @ DSSRV-005-EV recorder, @ up to 8 camera licenses, @ the hardware/software solution is fully scalable with H.264 compression, @ optimization of the pre-installed NV DS software, @ support for the network encoders and IP Pelco cameras or those of third

parties.

HD network camera PELCO security imaging pack


@ To study an IP camera network. @ To turn on and confi gure the system. @ To highlight the performance of camera

surveillance. @ To perform a back focus of the camera

with the analog output. @ To launch the AutoBackFocus without

going through the web page. @ To launch the ABF by a temperature

change and a day/night transition. @ To set the threshold for switching from day

to night mode from 0.25 to 50 lux. @ To perform the masking of an area.


@ Power supply: Ethernet network or 24 V single phase

@ Dimensions (H x L x D) - weight:camera: 136 x 79 x 85 mm -approximately 0.5 kg

Principal industry @ Technical high school

To order

MD1PELCOPACK1: security imaging camera packMD1PELCOMONIT: monitor optionMD1PELCOCLAV: Key + power supply optionMD1PELCOEXT: Casing and support option IP 66MD1PELCOHARD: Recorder option


Presentation of the kitThe prototyping and modeling in electrical engineering programs are concerned by the accurate implementation of technical solutions to improve energy performance and/or energy effi ciency of a system, the implementation of a wireless network and the transfer of energy or RFID informations.Several solutions are available to meet these needs:

@ a Wizer radio frequency pack (see page 44), @ KNX pack for the optimization of energy consumption (see page 30), @ Energy Effi ciency modular offer (see page 46), @ Energy Effi ciency modular offer (see page 42), @ Energy Effi ciency KNX modular offer (see page 43), @ RFID offer (See pages 106 and 108), @ Telemetering modular offer (see page 45).

Other confi gurations may be offered to meet the modeling and prototyping needs (contact your usual supplier).

Modular offers and kits forthe modeling and prototyping

To order

MDG99WISER: Wiser packMD1AAKNXVR: KNX packMD1AMATVEE: Energy effi ciency modular offerMD1AM6130: Energy management modular offerMD1AM3EE: Energy effi ciency KNX modular offerMD1AMLRFID: RFID modular offerMD1PACKRFID: RFID packMD1AMLIRIO: Telemetering modular offer

Wiser modular offer

Telemetering modular offerKNX pack


@ To implement technical solutions for the improvement of energy performance.

@ To respond to a new need by providing more effi cient solutions.

@ To improve the performance of an energy chain.

@ To learn the constraints of the RT2012. @ To optimize the management of energy

through the use of a control system.




Principal industry @ STI2D diploma

Other industries concerned @ Thermal and electrical engineering


Building management


Presentation of the kitThis educational offer is composed of three complementary subsets:

@ The fi rst is a presentation report from the conclusions of the HOMES project (1). It includes video interviews of experts in the fi eld of energy effi ciency and real case studies. From these resources, the teacher may use all or part of these materials to implement the course,

@ the second is a set of instructional material solutions that allow measurement, real-time storage of consumption and remote access using a smartphone, tablet or PC:

_ Solution 1: MINIBAT, the mini institutional building that provides an example of energy management through regulation of heat and lighting (see page 29),

_ Solution 2: modular telemetering energy kit to focus and present local and remote control information on building (see page 45),

_ Solution 3: WISER, a modular energy and comfort management suite in the residential sector (see page 44).

@ the third is a modeling software. It allows dynamic simulation of thermal behavior on energy consumption and air quality inside a building in accordance with current standards (including RT2012). It comes with predefi ned templates but also offers the possibility to create new modeling capabilities.The software takes into account the uses of the building (number of residents, schedules, etc.) and the active management of the building (supervision and automation of the equipment).(1) HOMES is an innovation program in the fi eld of the active energy effi ciency on buildings. Its purpose: "to provide each building with effi cient active energy solutions to achieve the best energy performance."

Instruction of the energy

efficiency of buildings

Telemetering

Wiser

Minibat

To order

MDG993EBCL: course + softwareMDG993EB: course + MinibatMDG993IRIO: course + telemeteringMDG993WISER: course + Wiser


@ Understand, analyze and master the fundamental principles for overall energy management.

@ Understand the concepts of energy effi ciency.

@ Know how to optimize energy consumption through the use of tailored solutions.

@ Educate students through case studies and the use of energy consumption scorecards.

@ Model different usage cases with building simulation software.

@ Bring attention to the concept of a return on investment.

Principal industry @ Industrial Science and Technology and

Sustainable Development high school

Other industries concerned @ Energy engineering @ Civil engineering @ Energy industries of higher education


Energy management solutionsapplied to residential and small industry areas

iRio controller

To order

Consult with us to defi ne the confi guration

Presentation of the kit: Two systems are available allowing both to address issues of energy management control of a residential area or small service industry. Different scenarios are highlighted in terms of confi gurable technology (lighting, heating, ventilation and openings management).Both systems enable organizational tasks, implementation and commissioning to be addressed.The small service industry system consists of, among other things:On a controller which collects and stores data generated by energy and fl uid meters or sensors (temperature, ...) according to the requirements of the RT 2012. It also allows a simple Internet browser to provide remote operation and control of the system via interface with a KNX and DALI solution so as to manage lighting, heating and opening.The residential system consists of, among other things:A management solution for lighting, heating and opening using a pilot wire. Additional options are available, such as:

@ access control, @ VDI communication, @ a measuring and monitoring energy solution by usage type.


@ To optimize energy consumption by visualizing the distribution of consumption per usage (fl uids, electricity, etc.).

@ To confi gure an installation optimization purposes in energy consumption while improving residents comfort.

@ To understand the major principles of the RT2012.



@ Dimensions (H x L x D) - weight:2400 x 2800 x 1600 mm - approximately70 kg


40

Global managementof energy



Modular offer for residential and small industries energy efficiency n ............ 42

Energy efficiency KNX modular offer n ................................................................................ 43

Wiser kit, RT2012 application n .................................................................................................. 44

iRio telemeter modular offer n ................................................................................................. 45

Energy efficiency case n ............................................................................................................... 46

Ventilation system ............................................................................................................................. 47

Solar modular offer ............................................................................................................................ 48

Instrumented solar panel bench n ......................................................................................... 49

Soleolis: solar panels and wind turbine .................................................................................. 50

SolEzy bench n ..................................................................................................................................... 51

Tube solar water heater n ............................................................................................................ 52

Solar water heater .............................................................................................................................. 53

Lubio system ......................................................................................................................................... 54

Didalub: management of public lighting ............................................................................... 55

Heating control bench ...................................................................................................................... 56

Development of the LV switchboard into

the energy management switchboard n ............................................................................ 57

Compensation of reactive energy bench ............................................................................ 58

Harmocem: electromagnetic disturbances ...................................................................... 59

Harmotris: three-phase network harmonic interference bench ............................ 60

Minharmotris: harmonic interference in three-phase installation ....................... 61

Load terminals for electric vehicles n .................................................................................... 63

Smart Grid application n ............................................................................................................... 64

Photovoltaic installation, isolated and non-isolated site n ....................................... 65

Vizelia offer n ....................................................................................................................................... 66

Energy efficiency case .................................................................................................................... 67







Example of implementation

Presentation of the kitThe modular offers for residential and small industries energy effi ciency enables to study and implement the components of an electrical installation. Economics aspects and energy management are addressed through the use of products such as a programmer, dimmer light switch, timer, time delay switch...The bench consists of domestic products, the most commonly used, exposed in the boxes.The energy effi ciency modular offer is composed of three informative study packages for the discovery, learning and use of the main functions encountered in the implementation of electrical installations for residential and small industries (see modular offer and kit in the electrical installation chapter).The energy effi ciency modular offer MD1AM6130 consists of the following components:quantity name1 circuit breaker panel module DB90/500mA with tariff meter2 circuit breaker module 1P+Neutral 10A 2 circuit breaker module 1P+Neutral 16A 1 Differential switch module 1P+N 16A/30mA 1 Programmable time delay switch module2 modular contactor module 2F 25A 2 MIN'clic time-delay switch module, 1 to 7mm 16A 230V AC1 Light dimmer switch module type IC2001 CDS single-phase load shedding contactor, 1 channel1 motion detector 1 Room sensor module 1 Thermostat TH4 module2 ALCYON two way switch 2 ALCYON simple push button 3 light simple push button module2 Power outlet module 10/16A 2P+E 4 Lamp support module 15W 1 Support structure 1 Electric radiator operative part

This offer can be made piece by piece by purchasing the modules separately.

Modular offer for residential and small industries energy efficiency

Load shedding module

Programmable timer module

Light dimmer switch module

To order

MD1AM6130: Energy effi ciency modular offer


@ To understand the concepts of energy effi ciency.

@ To optimize energy consumption through the use of suitable products.



@ Dimensions of the storage boxes (H x L x D) - weight:470 x 430 x 250 mm - 20 kg

Principal industr

educational solutions from schneider electric

Documents