edm wire - toolmakers supplies
TRANSCRIPT
High quality EDM wires available in a range of diameters and spool sizes in plain brass or coated.
Toolmaker Supplies Limited
Unit 1, Britannia Business Centre, Britannia Way, MALVERN, Worcestershire, WR14 1GZ
Tel 01684 573398 Fax 01684 573208
tmsedm.co.uk
EDM DRILLING
EDM WIRE
WORK HOLDING
WEAR PARTS
INJECTION MOULDING
EDM CHEMICALS
ION EXCHANGE RESIN
MITSUBISHI CUTTER UNITS
FILTER PRODUCTS
EDM ELECTRODE TUBES
EDM WIRE
MICRO & SPECIAL
The fine Micro wires combine the highest tensile strength with the tightest tolerances, even at diameters smaller than a human hair.
Available in sizes from 0.03mm through to 0.10mm.
Also available, stainless steel and copper wires for special applications.
COATED
The high-quality coated wires are stocked from Bedra which set new standards in cutting performance, precision and process stability. The coatedwires attain an excellent surface quality of the workpiece with maximum profitability, making these products the clever alternative to brass wire in orderto further improve productivity in mould and tool making.
A comprehensive range of coated/gamma wires are always in stock including Topas, Cobracut, Broncocut, and Megacut. These wires are compatible with all European, Japanese and the latest Taiwanese machines.
BRASS
Reliable brass wires for all standard applications, supplied from key European (Bedra, Dahmen) and Japanese (OKI) suppliers. Wire is supplied insizes 0.05mm through to 0.3mm on a range of spool sizes from 4kg to 45kg.
Like the coated products, the brass EDM wires are subject to strict production standards and therefore guarantee reliable cutting performances.