ecoflow80 bag filter fine efficiency rating
TRANSCRIPT
Riverside House, Parrett WayBridgwater TA6 5LB
www.jfilters.comT +44 (0) 1278 452277F +44 (0) 1278 450873
Picture of inflated Pockets, showing clearly the unique ProPerties of the Pocket dividers and the effectiveness of them to keeP the Pockets from touching, and in so doing maintain oPtimum airflow
General DescriptionThe Ecoflow Range of bag filters are used widely in applications where low cost fine filtration is required.
Ecoflow80 Bag FilterFine Efficiency Rating
ConstructionEcoflow bag filters are manufactured by mounting the 100% polypropylene synthetic electrostatically charged media into a galvanised steel header frame.
FeaturesEfficient mechanised manufacturing techniques delivery cost effective filtrationHydrophobic Media allows great performance in damp atmosphereRolled safety edge to prevent the material being cut and to prevent injury to the engineers who handle themExtra built in prefilter layer which provides extended filter lifeWelded pockets, utilising the ultrasonic technique to provide leak free seamsVersatile manufacture - available in most sizes and pocket configurationPacked individually in a plastic bag and then into strong cartons for safe transportation and storage.
Filter Media• Is Polypropylene• Triple Filtration layered• Is available any size• Is totally non toxic and non irritant• Is very inexpensive• Electrostatically charged
Average Efficiency at 0.4 micron* 80%Rating to ASHRAE 52.2 Test Standard Merv 13
Pocket Depth Rated Airflow Initial Pressure Drop
355mm 2.00m/sec 105Pa
500mm 2.38m/sec 105Pa
600mm 2.62m/sec 105Pa
Maximum Final Recommended Pressure Drop 350Pa
Minimum Velocity required 1.2m/sec
Velocities above based on 8 Pocket Filters
*Efficiency measured on electrostatically charged filter media
RS, Professionally Approved Products, gives you professional quality parts across all products categories. Our range hasbeen testified by engineers as giving comparable quality to that of the leading brands without paying a premium price.
ENGLISH
OptionsStandard header frame depth is 20mm, also available 12mm, 15mm, 25mm, 33mm
Pocket Depths of 229mm(9”), 300mm(12”), 380mm (15”), 450mm (18”) 530mm (21”), 635mm(25”), 711mm(28”) Also available.
Other Pocket configurations available to order, for instance 8 pockets across a 592mm wide frame.
Ecoflow80 Bag Filter STANDARD SIZES
0
20
40
60
80
100
120
140
160
0 500 1000 1500 2000 2500 3000 3500 4000
Pre
ssur
e D
rop
[P
a]
Air Flow [m³/h]
EC7-2424/8 POCKET Pressure Drop
0
20
40
60
80
100
120
140
160
0 500 1000 1500 2000 2500 3000 3500
Pre
ssur
e D
rop
[P
a]
Air Flow [m³/h]
EC7-2420/8 POCKET Pressure Drop
Part Number
Header Dimensions
Number of Pockets
Pocket Depth = [D]
Height (mm) Width (mm)Capacity m³/hr @ 127Pa
350mm [15] 500mm [20] 600mm [24]
EC7-12/[D] 592 287 3 938 1088 1275
EC7-12/[D]/4 592 287 4 1250 1450 1700
EC7-12/[D]/5 592 287 5 1563 1813 2125
EC7-20/[D] 592 492 5 1563 1813 2125
EC7-24/[D] 592 592 6 1875 2175 2550
EC7-24/[D]/8 592 592 8 2500 2900 3400
0
20
40
60
80
100
120
140
160
180
200
0 500 1000 1500 2000 2500 3000 3500
Pre
ssur
e D
rop
[P
a]
Air Flow [m³/h]
EC7-2415/8 POCKET Pressure Drop
RS, Professionally Approved Products, gives you professional quality parts across all products categories. Our range hasbeen testified by engineers as giving comparable quality to that of the leading brands without paying a premium price.
ENGLISH