ec manufacturer's declaration · procedure is ped sep article 4.3. pressure equipment...
TRANSCRIPT
Member of the ELAFLEX Group
EC MANUFACTURER'S DECLARATION
Description of Product:
Type:
Model
Variant
Name of Manufacturer:
Address:
Check Valve
300 Series - NPT I SAE I BSP & ORFS
CV304 I CV306 I CV308
Standard & Heavy Duty
Oasis Engineering Ltd
129 Birch Ave Tauranga 3110 New Zealand
www.OasisNGV.com
We hereby declare that the products described above comply with the relevant provisions of the appropriate EC Directives, Harmonised Standards of the European Union and other
recognised standards listed below and accordingly carry the required markings.
Pressure Equipment Directive: 2014168/EU Compliance procedure is PED SEP Article 4.3.
The following Standards are applicable:
BS EN 12516-2: 2014 AS/NZS/ISO 9001: 2015 BS EN 10272: 2016 ISO 228-1:2000 BS EN 10204: 2004
ISO 5208: 2015 ASME 1.20.1-2013 (R2018) SAE J1453-1: 2012 SAE J1926-1 SEP2016
Note: The 300 series Check Valve models described above have been manufactured to Sound Engineering Practice (SEP) and therefore carries no GE marking. Evidence of SEP is
contained within the Technical File as required by the EC Pressure Equipment Directive 2014/68/EU.
Date of Declaration: 23s1 July 2020 Place of Declaration: Tauranga NZ
Date of Issue: 29th July 2020 Declaration No. NZCE 317-2020
-Andrew Cameron Managing Director
Oasis Engineering Ltd
NZCE 317:Oasis CPI 2017 rev5 23/07/2020
CEf?!,O~t www.ceproof.com
CEproof International (NZ)Ltd Keeper of technical documents in the European Union