Quilt Size: 52” x 52” / Finished Block Size: 12” x 12” / Nine block quilt

Fabric RequirementsCut all strips selvage to selvage (WOF)

FABRIC YARDS CUTTING INSTRUCTIONS

Fabric #1 MediumBlock centers and binding 5/8 yd.

• Cut 1 – 2_” strip; subcut into 9 – 2_”squares for block centers

• Cut 6 – 2_” strips. Piece for binding

Fabric #2 LightYellow/orange 1_ yds.

• Cut 22 – 1_” strips; subcut into logs asdirected in rotary cutting table for oddrows

Fabric #3 Multi-color Blue/yellow for blocksand outer borders

1_ yd.

• Cut 10 – 1_” strips; subcut into logs asdirected in rotary cutting table for evenrows

• Cut 2 – 3_” strips; for row #10 triangleunits

• Cut 6 – 6_” strips. Piece for outer borders

Fabric #4 Medium or DarkBlue _ yd.

• Cut 10 – 1_” strips; subcut into logs asdirected in rotary cutting table for evenrows

• Cut 2 – 3_” strips; for row 10 triangle unitsFabric #5 Medium DarkOrange for inner borders 1/3 yd. • Cut 4 – 2_” strips for inner borders

Backing 3_ yds. 2 panels 26” x 60”

Batting --- 60” x 60”

Easy PineappleLog Cabin

Featuring theEZ Pineapple Log Cabin Ruler

By Kimberly Einmo

No MathNo Trapezoids

No Stress!

Rotary Cutting

ODD ROWS MEASUREMENT EVEN ROWS MEASUREMENT

1 1_” x 2_” 2 1_” x 3_”3 1_” x 4” 4 1_” x 4_”5 1_” x 5” 6 1_” x 5_”7 1_” x 6” 8 1_” x 6_”

9 1_” x 7 10 3_” strip. Use Side B corner markings to cuttriangle units from strips

Pineapple Log Cabin Block Assembly

1. Use Side A of the Pineapple Log Cabin Ruler to cut the fabrics as listed in the FabricRequirements table. The Rotary Cutting table provides the measurements for each patch.

2. Using a scant _” seam allowance, sew the top and bottom patches of Row 1 to the centersquare. Press logs open with seams away from center square. Diagrams 1A, 1B, 1C.

3. Sew side patches of Row 1 to center square and press logs open with seams away from centersquare. Diagrams 1D, 1E.

4. Use Side B of the Pineapple Log Cabin Ruler to trim Row 1 patches as shown. Diagrams 1F, 1G,1H.

5. Trim all four sides of Row 1. Diagram 1I.6. Center Row 2 patches RST matching raw edges of Row 1.Sew top and bottom Row 2 patches to

Row 1 and press logs away from center square. Diagrams 2A, 2B, 2C.7. Repeat process, and sew side patches of Row 2 to Row 1 and press logs away from center

square. Diagrams 2D, 2E.8. Use Side B of the Pineapple Log Cabin Ruler to trim Row 2 patches as shown. Diagrams 2F, 2G.9. Continue adding odd and even rows of logs by centering patches RST in this manner through

Row 9. Press logs open and always press seams away from center square. Diagrams 3A, 3B,3C, 3D, 3E.

10. After the addition of each complete row of logs, use Side B of the Pineapple Log Cabin Ruler totrim edges from logs before adding next row. Diagrams 3F, 3G, 3H.

11. Add Row 10 triangle units to four corners of block. Press triangles open with seams away fromcenter squares. Diagrams 4A, 4B.

12. Use Side A of Pineapple Log Cabin Ruler to square block to 12_” unfinished.

Make Nine

CenterSquare

12

3

4

5

6

7

8

9

10

Quilt Assembly

13. Follow block layout diagram and carefully rotate blocks to complete quilt top as shown in colordiagram above.

14. Add inner borders; then add outer borders. Press all border seams away from quilt center.15. Layer batting and backing. Quilt as desired.16. Add binding by hand or machine. Don’t forget to add a label and sign the back of your quilt in

permanent ink. Share and enjoy!

Fabric# 1

Fabric #2

Fabric#2

Fabric#2

Fabric #2

Fabric #4Fabric #3

Fabric #3Fabric #4