easy manual for mb nec motorola ir key programmer - … nec_motorola_ ir... · 2018-12-27 · easy...
TRANSCRIPT
WWW.KEYPROGTOOLS.COM
EASY MANUAL FOR MB NEC MOTOROLA IR KEY PROGRAMMER Device can repair and learn an Extra key to MB MOTOROLLA EIS types with and WITHOUT WORKING KEY.
NO KEY PASSWORD NEED NEEDED, DEVICE READ
THE PASSWORD DIRECT FROM THE EIS. For today works up to 70% (W203 - 70-90%, W209/211 - 10-20%) and some of other models based on
HC08/HC12.
Program keys for HAVANA/ AMAZONAS PALERMO… EIS with black or chrome key
Version 51/57.
Device read the EIS/EZS via IR/OBD/CAN AND K-LINE.
Renew and program all Nec key versions like V11/21/V28/35/41/51/40/57.
If the car (WITH NEC EIS) has no keys at all or has new BGA key, device create Grey
key to program NEW EIS.
Activate/Deactivate/Enable and disable keys via IR/K-Line.
Renew and program all Nec key versions like V11/21/V28/35/41/51/40/57.
TO PROGRAM AN EXTRA KEY IN THE CAR.
OR ON TABLE.
1 - Plug the IR key in your PC USB and open the MB NEC IR
software.
2 – Select the Car type, Click on READ.
(DEVICE WILL WRITE INSERT IR TOOL IN TO EIS)
3 - Insert the IR TOOL In the EIS/EZS.
Device will Read the EIS Dump in a few seconds.
And automatically save it on your desktop under a folder
named Read.
(REMOVE THE IR KEY FROM EIS, JOB IS DONE IN THE CAR)
4 - Open the original working remote, DESOLDER the NEC and put it in MB NEC Socket
5 - First plug the USB cable in your pc plug the MB Nec socket in the device then plug the MB NEC device in your PC. 6 - Open NEC software and click on READ.
Device will READ the key number, SSIS, Key Version and Key
Status.
7- Click on READ EEPRON Bytes.
Device will take from 15 to 20 seconds to read the Key
PASSWORD.
Device will automatically save the password on your desktop in READ FOLDER.
Key number and SSID Must be identical.
Dump is ready to generate keys. Or you can use our MB NEC ESL Device, load the EIS Dump and program a new ESL/ELV Or Emulator. You can use our SKC (Simon key calculator) or online key calculating to generate keys.
8 - Open any used remote, remove the NEC and put it in MB NEC device (make sure the NEC and the NEC Socket are clear) 9 - Open the MB NEC Software. Click on READ, Click on ERASE, device will renew the NEC in
a few seconds.
You can Renew and program all Nec key versions like
V11/21/V28/35/40/41/51/57.
You can check the Key Radio Bytes and fix it if to be 03
You can play and fix the Key life time hash counter.
If the car has NEC EIS Without existing keys, device can
create a Grey key dump so you can program any new EIS
And start the car.
If the car has a Motorola EIS, First click on (READ 1)
Follow the software instruction as in some EIS types device
will ask you to insert and remove the IR Tool up to 8 times.
Device will read the EIS Dump and automatically save it in a
folder on your PC desktop under named READ.
Click on (READ 2) Remove and insert the IR Tool so the
device will read the EIS Password if It’s possible.
Dump will be automatically saved in READ Folder on your
desktop so the dump will be ready for key calculation.
IR Software will show you the EIS Actual value.
You can Enable and Disable keys in one click.
Follow the same instructions on the top of the easy manual
to program the key.
Re solder NEC in the key and start the car. Professional used manuals (Engineering mode) will be provided as well under purchasing the device. For more info contact us at: [email protected] or [email protected]
Enjoy