e1safe core

4

Click here to load reader

Upload: kaim1

Post on 02-Jun-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: e1safe Core

8/10/2019 e1safe Core

http://slidepdf.com/reader/full/e1safe-core 1/4

 

1 / 4

10609 - SAFE-COR E

SAFETY DATA SHEETSAFE-COR E

 

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY: 

PRODUCT NAME: SAFE-COR E

APPLICATIONS: Corrosion inhibitor 

EMERGENCY TELEPHONES: 001 281 561 1600 (USA) 

SUPPLIER: M-I Drilling Fluids UK Ltd,

  Pocra Quay,

  Footdee,

  Aberdeen. AB11 5DQ

TELEPHONE: 44 (0)1224 - 584336

FAX: 44 (0)1224 - 576119 

2. COMPOSITION/INFORMATION ON INGREDIENTS: 

CAS No.: CONTENT HEALTH: RISK:INGREDIENT NAME:  10-30 %DERIVATIVE OF AMINES57-55-6 1-5 % NCPROPYLENE GLYCOL

 

COMPOSITION COMMENTS:This product is classified as containing no hazardous ingredients according to the EC Directives.

 

3. HAZARDS IDENTIFICATION: 

 Not regarded as a health hazard under current legislation. 

4. FIRST AID MEASURES: 

INHALATION: Move the exposed person to fresh air at once. Get medical attention if any discomfort continues. 

INGESTION: Promptly get affected personnel to drink large volumes of water to dilute the swallowed chemical. Try to inducevomiting by having affected person touch back of the throat with his finger or by giving him syrup of ipecac as

directed on the package. Get medical attention. 

SKIN: Wash skin thoroughly with soap and water. Remove contaminated clothing. Get medical attention if anydiscomfort continues.

 

EYES: Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Getmedical attention if any discomfort continues.

 

5. FIRE FIGHTING MEASURES: 

EXTINGUISHING MEDIA:

Water spray, fog or mist. Powder, foam or CO2. Dry chemicals, sand, dolomite etc. 

Page 2: e1safe Core

8/10/2019 e1safe Core

http://slidepdf.com/reader/full/e1safe-core 2/4

 

2 / 4

10609 - SAFE-COR E

2 / 4

10609 - SAFE-COR E

SPECIAL FIRE FIGHTING PROCEDURES:Use special protective clothing. Regular protection may not be safe. NOTE! Use air-supplied respirators to protect against gases\fumes.

 

UNUSUAL FIRE & EXPLOSION HAZARDS: No unusual fire or explosion hazards noted.

 

6. ACCIDENTAL RELEASE MEASURES: 

PERSONAL PRECAUTION IN SPILL:Wear proper personal protective equipment (see MSDS Section 8).

 

SPILL CLEANUP METHODS:Stop leak if possible without risk. Contain and recover liquid if possible. Absorb in vermiculite, dry sand or earthand place into containers. Dike far ahead of larger spills for later disposal. Do not contaminate water sources orsewer. Flush with plenty of water to clean spillage area.

 

7. HANDLING AND STORAGE: 

USAGE PRECAUTIONS:Avoid spilling, skin and eye contact.

 

STORAGE PRECAUTIONS:Keep containers tightly closed. Store away from; Acids. Oxidising material. Store below 25°C.

 

8. EXPOSURE CONTROLS AND PERSONAL PROTECTION: 

CAS No.: STD: LT EXP. 8 HRS: ST EXP. 15 MIN:INGREDIENT NAME:

57-55-6 OES. 150 ppm No std.PROPYLENE GLYCOL 

PROTECTIVE EQUIPMENT:

 VENTILATION: Provide adequate general and local exhaust ventilation. 

RESPIRATORS: If ventilation is insufficient, suitable respiratory protection must be provided. Gas cartridge (organic substances).Gas cartridge (acid gases).

 

PROTECTIVE GLOVES:Chemical resistant gloves required for prolonged or repeated contact. Use protective gloves made of: Butyl

rubber. Nitrile. Neoprene. 

EYE PROTECTION:Wear approved chemical safety goggles where eye exposure is reasonably probable.

 

OTHER PROTECTION:Provide eyewash station. Wear appropriate clothing to prevent repeated or prolonged skin contact.

 

9. PHYSICAL AND CHEMICAL PROPERTIES: 

APPEARANCE: Liquid.

COLOUR: Tan. to Black.SOLUBILITY DESCRIPTION: Miscible with water.

MELT./FREEZ. POINT (°C, interval): -8 (crystalisation point)

DENSITY/SPECIFIC GRAVITY (g/ml):  1.050 TEMPERATURE (°C): 20

Page 3: e1safe Core

8/10/2019 e1safe Core

http://slidepdf.com/reader/full/e1safe-core 3/4

 

3 / 4

10609 - SAFE-COR E

3 / 4

10609 - SAFE-COR E

pH-VALUE, CONC. SOLUTION: 10.6

VISCOSITY:  5.4 - 5.7 cps TEMPERATURE (°C): 20

FLASH POINT (°C): >70 METHOD: Sh CC (Setaflash closed cup). 

10. STABILITY AND REACTIVITY: 

STABILITY:  Normally stable. Avoid: Heat, sparks, flames. 

MATERIALS TO AVOID:Strong acids.

 

11. TOXICOLOGICAL INFORMATION: 

INHALATION: May cause irritation to the respiratory system. 

INGESTION: May cause discomfort if swallowed. 

SKIN: Prolonged or repeated contact may cause mild irritation. 

EYES: Spray and vapour in the eyes may cause irritation and smarting. 

12. ECOLOGICAL INFORMATION: 

ECOLOGICAL INFORMATION:Contact M-I's Environmental Affairs Department for ecological information.

 

13. DISPOSAL CONSIDERATIONS: 

GENERAL/CLEANING:

Empty containers retain residues. All labeled precautions must be observed. 

DISPOSAL METHODS:Recover and reclaim or recycle, if practical. Dispose of in accordance with Local Authority requirements. Thismaterial and its container must be disposed of as hazardous waste.

 

14. TRANSPORT INFORMATION: 

ROAD TRANSPORT:ROAD TRANSPORT NOTES:  Not Classified 

RAIL TRANSPORT:RAIL TRANSPORT NOTES:  Not Classified. 

SEA TRANSPORT:SEA TRANSPORT NOTES:  Not Classified. 

AIR TRANSPORT:AIR TRANSPORT NOTES:  Not Classified. 

15. REGULATORY INFORMATION: 

RISK PHRASES:  Not classified.

Page 4: e1safe Core

8/10/2019 e1safe Core

http://slidepdf.com/reader/full/e1safe-core 4/4