e0275 hand & drum pumps - dultmeier.com · dultmeier sales • omaha, ne (800) 228-9666 • ...
TRANSCRIPT
DULTMEIER SALES • OMAHA, NE (800) 228-9666 • www.dultmeier.com • DAVENPORT, IA (800) 553-6975 E0275
Hand & Drum PumpsE0275
Piston Pumpsfor Motor Fuels & Solvents
Rotary Pump & Counterfor Motor Fuels
Model F152A is Piston Pump for many fluids. Fill-Rite's “double-acting” hand pump can be used with a wide variety of liquids, including gasoline, oils, solvents, alcohol, acetates
and paint thinners.Non-Corrosive Construction: Lightweight,
corrosion-resistant, and all metal construction. Body and piston are made of aluminum.
Replaceable, stainless steel liner.High Capacity . . . Reversible Flow.
Capacity of approximately 0.8 quarts per stroke. Flow can be reversed
by removing the shaft pin and rotating the piston 180°. 1" inlet
and 3/4" outlet.
112A Rotary Pumps will deliver approximately 10 gallons per 100 revolutions, requiring about one minute. Pump body is light-weight cast aluminum and rotor is non-porous cast iron. Mechanism is readily accessible for cleaning. Inlet is 1" FPT and discharge port is 3/4" FPT. Pumps include a 2" water tight bung adaptor, telescoping suction pipe, discharge hose and nozzle. Works with gas, diesel, kerosene and light oils.
No. 111 Revolution Counter measures each delivery to 20 gallons and has a totalizer to 10,000 gallons.F152A
Part No. FILL-RITE HAND PUMPS Wt. Net Ea.FR F152A Pump with 3/4" x 8' Buna hose, Nozzle & Telescoping Pipe. 18 lbs. $171.00FR 807CMK Meter Kit with fittings to add meter........... 194.90
D
Part No. ROTARY HAND PUMPS Wt. Net Ea.FR 112A Pump with 3/4"x 8' Buna Hose, Nozzle and 1" Telescoping Pipe .......... 18 lbs. $ 171.50FR 110 Pump Only ............................................ 12 lbs. 157.70FR 807CMK Meter Kit with fittings to add meter ....... - 194.90FR 111 Revolution Counter Kit for 112A Pump . 2 lbs. 67.35
D
Viton® is a registered trademark of DuPont Performance Elastomers
Will deliver more flow with greater ease than any other hand pump on the market. 2 quarts per stroke on lightweight fluids. Heavier fluids can be handled by moving the pivot pin on the handle which changes the stroke of the pump to deliver 1 quart per stroke. Lightweight aluminum body, stainless steel shaft and piston liner, a Teflon piston ring and packing, adjustable poly suction pipe, 2" MPT base, and a thermoplastic nozzle. 1" FPT inlet and 3/4" FPT outlet with 8’ discharge hose and end spout. 18 lbs.
HP100 PETROLEUM PUMP: For petroleum products. Has buna seals and hose.
HP100UL PETROLEUM PUMP: Suitable for B100 Biodiesel as well as gas and diesel. Note: Not for E-85.
Dual-Flo Piston Hand Pump
Barrel Pump
No. 381 Barrel Pump fits 15 through 55 gallon drums with 2” NPT bung openings. Steel piston with polyethylene “O”
ring seal. Curved discharge spout has garden hose threads. Includes steel telescoping suction tube with
neoprene seals. Approximately one pint per stroke. * Not For Gasoline. Use for diesel, light oils & hydraulic oils.
No. 382 is the same as No. 381 except it has a no drip attachment.
Part No. “GPI” HAND PUMPS Wt. Net Ea.GI HP100 Petroleum Pump 19 lbs. $ 164.70 GI HP100UL B100 Petro Pump 19 lbs. 170.70
Part No. Wt. Net Ea.NS 381 Barrel Pump 7 lbs. $ 33.00 NS 382 Barrel Pump 7 lbs. 36.50
5% Discount On 5 Or More
D
D
Drum Pumps for 15 to 55 Gallon Drums with 2" NPT bung openings. These pumps have a siphoning feature that allows flow of products to continue without further pumping - once pump is primed and handle is put in the proper position. 36” Suction pipe included. Note: Hose is not included.
Model 1000 is for use with gasoline, diesel, light oils and similar non-corrosive materials. Delivers 12 ounces per revolution. 3/4” MPT Outlet.
• Simple circular rotation of handle discharges accuracy measured quart of liquid.
• No adjustments required. Accuracy is consistent year after year.
• One-piece molded Delrin Piston.
• Pumps almost any petroleum product.
• 2" base is threaded for drum openings.
• Telescoping suction pipe included, will fit 15 to 55 Gallon drums. Weight is 5 lbs.
Quart Stroke Pump
Rotary Hand Pump
Part No. Pump Type Wt. Net Ea.NS 1000 Rotary Hand Pump .... 13 lbs. $ 56.60
Part No. Pump Style Net Ea.FR 31 Quart Stroke for Oil ........ $ 184.00
D
D
Rotary Vane Hand Pump
Part No. Pump Type Wt. Net Ea.FR SD62 Rotary Hand Pump .. 12 lbs. $ 51.95
D
• Easy to Use Hand-Operated Rotary Vane Pump that Delivers Approximately 6 Gallons per 100 Revolutions
• For Medium-Viscosity Oils, Diesel Fuel & Non-Corrosive Fluids
• 2” NPT Threaded Bung Adapter• Gooseneck Discharge Spout• Lightweight Die-Cast Aluminum Body• 1” Polymer Suction Pipe Adjusts for
15 to 55 Gallon Drums• 2" base is threaded for drum openings.• Smooth, Easy Action
F112A
HP100
1000
381
31
SD62
Cast Iron Hand Pump for Gas & Oil
High Flow Cast Iron Pump is designed for the transfer and dispensing of gasoline, lubricating oil and other non-corrosive liquids which are compatible with pump component materials.
Part No. Wt. Net Ea.GR 5541-95 Hand Pump for Gas & Oil 18 lbs. $ 79.95
• Cast Iron Construction with Carbon Vanes & Steel Components.
• Buna-N Seal & Fiber Gasket.• Maximum Temperature is 160° F.• 8 GPM @ 70 RPM (14 Oz/Stroke)• 1” NPT Steel Discharge Spout.• 1” NPT x 40” Steel Suction Tube Assembly.• 2” Cast Iron Bung Adapter.
D
5541-95