e-zapper support electronics
DESCRIPTION
E-Zapper Support Electronics. Note: Cabinets may be separated into two pieces (sideways), but vertical components are tightly coupled. C. Schnappinger & J. Ziegler 1/06/2006 # 1. E-Zapper Support Electronics. Pulse Forming Networks. Voltage-Drop Resistors and small P.S. - PowerPoint PPT PresentationTRANSCRIPT
C. Schnappinger & J. Ziegler
1/06/2006 # 1
E-Zapper Support Electronics
Note: Cabinets may be separated into two pieces (sideways), but vertical components are tightly coupled.
C. Schnappinger & J. Ziegler
1/06/2006 # 2
E-Zapper Support ElectronicsPulse Forming Networks
Left Side Right Side
Right Side(Side View)
Voltage-Drop Resistors and small P.S.
Power Dist. And 4 small Transformers
C. Schnappinger & J. Ziegler
1/06/2006 # 3
E-Zapper Support Electronics
Left Side Right Side
Left Side(Side View)
Thyratron + Power Supplies + Pulse Drive (excess of 14 kV)
deQueing Deck and Voltage Regulator for Thyratron
Blower for Cooling all Cabinets
E-Zapper Support Electronics
Pulse Transformer
In = 25 kV
Out = 125 kV
Focusing Solenoid
RF Impedance
Isolator
Klystron Tube
RF Waveguides
Four valve system, so power is not directed back into Klystron, but two of the valves can be blocked with steel plates
For specs, see:
Klystron: CPI Industries (www.CPI.com)
5MW Klystron, 2.8 GHz
Thyratron: E2V Co. (www.E2V.com)
Tube = CS-1140
E-Zapper Support Electronics
Vibration Specifications:Weak links are the Klystron and Tryratron.