e-mail: [email protected] ms phone no.044 … final-kkn-171017.pdf · the cover should be...

32
EMPLOYEES STATE INSURANCE CORPORATION ESIC MEDICAL COLLEGE AND PGIMSR MODEL HOSPITAL (ISO 9001-2008 CERTIFIED) , ASHOK PILLAR ROAD, K.K NAGAR,CHENNAI-600078. E-mail: [email protected] MS Phone no.044-24893714 Website: www.esichennai.org FAX No.044-24897094 Tender No. 51/U/P&B/Ortho-Impl 17-18 F7 Dated: 16.10.2017 “CONFIDENTIALITY IS THE ESSENCE OF THIS TENDER” Sub: e-Tender Notice for Purchase of Ortho Implants under rate contract to the ESIC Hospital,Chennai under double bid system for the year- 2017-2019 E-tender is invited by the Dean, ESIC Medical College and PGIMSR Model Hospital, K.K nagar, Chennai-600 078 (under double bid system) from the manufacturers/authorized distributors/ Importers /Authorized suppliers having their business/ office at Chennai for the purchase of Orthopedic Implants under Rate Contract for two years .It can be extended further at the discretion of Dean, ESIC Medical College and PGIMSR Model Hospital, K.K nagar, Chennai-78 after taking consideration various factors governing such extension . If you are in a position to quote for the contract in accordance with the requirements stated in the attached schedule you should submit the tender through online only at e-procurement portal Tender https://esictenders.eproc.in .Document along with detailed tender notice, all terms and conditions and procedure of e- tendering may be viewed online or downloaded by the tenderer from the ESIC websites www.esic.nic.in & www.esichennai.org at “tenders” & https://esictenders.eproc.in . The downloaded complete tender documents duly filled in and signed on every page should be scanned and uploaded as per instructions in Annexure-I on or before 13.11.2017 upto11.00 A.M. In addition to e-tender which has to be filed on-line, the bidders also shall be required to submit the Earnest Money Deposit (EMD) in the form of Demand Draft drawn at any Nationalized / Scheduled bank in favor of ESI Fund Account No.1 payable at Chennai to be submitted either through Registered post with acknowledgement due (RPAD) or by hand delivery to the Dean,ESIC Medical College and PGIMSR Model Hospital, Purchase branch, Room No:125, Ist Floor, K.K nagar, Chennai-78, before the due date of opening of the tender without fail . All the original affidavits and documents are to be submitted with the technical bid as scanned copies uploaded in the e-tender format. Evaluation of online tender will only be done in normal circumstances. PRE-BID MEETING: There will be a Pre-bid meeting conducted on 27.10 .2017 regarding the tender at DMS chamber intrested bidders may participate in the meeting. All bidders are requested to check further notifications / Updates if any, on all the above mentioned websites only and No further newspaper advertisement will be given . TENDER SCHEDULE SL.No Details Dates / Time 1 Period of availability of online e-tender document on websites . From: 17.10.2017 upto Dated:13.11.2017 till 11.00AM 2 Handing over of EMD amount /S.D amount in the mode of Demand Draft through post (RPAD) or by hand delivery before the time period of Opening the bid without fail. The Dean, ESIC Medical College and Hospital, Ist Floor, Room No:125, Purchase Branch,K.K nagar, Chennai -78 3 Pre-Bid Meeting on 27.10.2017 / 11.00 AM 4 Last date and time of Bid Submission 13.11.2017 / 11.00 AM 5 Date of Opening online tenders 13.11.2017 / 11.30.A.M 6 Bid Processing Fee Rs.2,495/- 7 Earnest Money Deposit/ Bid Security Rs.25000/- 8 Performance Security/ Security Money to be deposit for successful Bidder 10% value of the contract. 9 Date of opening of Price Bid Will be intimated after evaluation of technical bid. *In case of an unscheduled holiday on the prescribed tender opening date, the tenders shall be opened on the next working day at the same venue and time. NOTE:- LATE TENDER OR POSTAL DELAYARE NOT ACCEPTABLE DEAN ESIC MEDICAL COLLEGE AND HOSPITAL, CHENNAI

Upload: hatuong

Post on 01-May-2018

214 views

Category:

Documents


1 download

TRANSCRIPT

EMPLOYEES STATE INSURANCE CORPORATION ESIC MEDICAL COLLEGE AND PGIMSR MODEL HOSPITAL (ISO 9001-2008 CERTIFIED) , ASHOK PILLAR ROAD, K.K NAGAR,CHENNAI-600078.

E-mail: [email protected] MS Phone no.044-24893714

Website: www.esichennai.org FAX No.044-24897094

Tender No. 51/U/P&B/Ortho-Impl 17-18 –F7 Dated: 16.10.2017

“CONFIDENTIALITY IS THE ESSENCE OF THIS TENDER”

Sub: e-Tender Notice for Purchase of Ortho Implants under rate contract to the

ESIC Hospital,Chennai under double bid system for the year- 2017-2019

E-tender is invited by the Dean, ESIC Medical College and PGIMSR Model Hospital, K.K nagar,

Chennai-600 078 (under double bid system) from the manufacturers/authorized distributors/ Importers /Authorized

suppliers having their business/ office at Chennai for the purchase of Orthopedic Implants under Rate Contract for two

years .It can be extended further at the discretion of Dean, ESIC Medical College and PGIMSR Model Hospital, K.K

nagar, Chennai-78 after taking consideration various factors governing such extension .

If you are in a position to quote for the contract in accordance with the requirements stated in the attached

schedule you should submit the tender through online only at e-procurement portal Tender

https://esictenders.eproc.in .Document along with detailed tender notice, all terms and conditions and procedure of e-

tendering may be viewed online or downloaded by the tenderer from the ESIC websites www.esic.nic.in &

www.esichennai.org at “tenders” & https://esictenders.eproc.in . The downloaded complete tender documents duly

filled in and signed on every page should be scanned and uploaded as per instructions in Annexure-I on or before

13.11.2017 upto11.00 A.M.

In addition to e-tender which has to be filed on-line, the bidders also shall be required to submit the Earnest

Money Deposit (EMD) in the form of Demand Draft drawn at any Nationalized / Scheduled bank in favor of ESI Fund

Account No.1 payable at Chennai to be submitted either through Registered post with acknowledgement due (RPAD) or

by hand delivery to the Dean,ESIC Medical College and PGIMSR Model Hospital, Purchase branch, Room No:125, Ist

Floor, K.K nagar, Chennai-78, before the due date of opening of the tender without fail. All the original affidavits and

documents are to be submitted with the technical bid as scanned copies uploaded in the e-tender format. Evaluation of

online tender will only be done in normal circumstances.

PRE-BID MEETING: There will be a Pre-bid meeting conducted on 27.10 .2017 regarding the tender at DMS

chamber intrested bidders may participate in the meeting.

All bidders are requested to check further notifications / Updates if any, on all the above mentioned websites only

and No further newspaper advertisement will be given .

TENDER SCHEDULE

SL.No Details Dates / Time

1 Period of availability of online e-tender document on

websites .

From: 17.10.2017 upto Dated:13.11.2017

till 11.00AM

2 Handing over of EMD amount /S.D amount in the

mode of Demand Draft through post (RPAD) or by

hand delivery before the time period of Opening the

bid without fail.

The Dean, ESIC Medical College and

Hospital, Ist Floor, Room No:125, Purchase

Branch,K.K nagar, Chennai -78

3 Pre-Bid Meeting on 27.10.2017 / 11.00 AM

4 Last date and time of Bid Submission 13.11.2017 / 11.00 AM

5 Date of Opening online tenders 13.11.2017 / 11.30.A.M

6 Bid Processing Fee Rs.2,495/-

7 Earnest Money Deposit/ Bid Security Rs.25000/-

8 Performance Security/ Security Money to be deposit

for successful Bidder

10% value of the contract.

9 Date of opening of Price Bid Will be intimated after evaluation of technical

bid.

*In case of an unscheduled holiday on the prescribed tender opening date, the tenders shall be opened on the next working

day at the same venue and time. NOTE:- LATE TENDER OR POSTAL DELAYARE NOT ACCEPTABLE

DEAN

ESIC MEDICAL COLLEGE AND HOSPITAL, CHENNAI

PG:1

B. PAYMENT RELATED INSTRUCTIONS FOR BIDDERS

Important Instructions for Bidders

All bidders/contractors are required to procure Class-IIIB Digital Signature Certificate

(DSC) with Both DSC Components i.e. Signing & Encryption to participate in the ETenders.

Bidder should get Registered at https://esictenders.eproc.in.

Bidders can contact our Helpdesk at https://esictenders.eproc.in/html/Support.asp

Bidder needs to submit Bid Processing Fee charges of Rs. 2495/- (non-refundable) in the

form of Demand Draft from any scheduled bank in favour of M/s. C1 India Pvt. Ltd.,

payable at New Delhi (or in any other form as acceptable by C1 India Pvt. Ltd.) for

participating in the Tender. [email protected]

Along with the Demand Draft, Bidder needs to send a covering Letter mentioning about

the Payment Details, Company Name, Address, User ID and Payment towards ESIC Bid

Processing Fees (Mention the Tender ID and Tender Title).

The payment should reach at the below mentioned address, at least one day before the

due date and time of Bid Submission:

Kind Attn: Mr. Mohit Chauhan

C1 India Pvt. Ltd.

301, Gulf Petro Chem Building, 1st Floor,

Udyog Vihar, Phase – 2,

Gurgaon, Haryana – 122015

Note: Bid Processing Fee will be Approved only after the receipt of payment.

C.INSTRUCTIONS TO BIDDERS FOR SUBMISSION OF BIDS : Annexure-I

1.The tender document can be downloaded from www.esic.nic.in, www.esichennai.org and Central Public

Procurement Portal: www.esictenders.eproc.in. The original copy of tender duly completed and signed on each

page, should be scanned and uploaded in the e-tender format. The payment mode for the EMD should be

submitted in a separate sealed cover super scribed as “tender for the Purchase of Ortho Implants” under

rate contract to the ESIC,Hospital K.K nagar,Chennai-78 under double bid system for the year-

2017-2019.

2. The EMD fee in the form of Demand draft or Banker’s cheque in favor of “ESIC Fund A/c No. I”

payable at Chennai, should be kept inside the EMD envelope The Demand Draft should reach the concerned

authority before the due date and time of opening the tender and the bid security is normally to remain

valid for a period of forty five days beyond the final bid validity period. If the vendor fails to submit EMD

on his part then his participation towards the tender is liable to rejected . Even though he has registered online.

The cover should be sealed and sent through REGISTERED POST addressed to the Dean, ESIC Medical

College and Model Hospital,Chennai-600078.The cover should be super scribed ‘Tender for Ortho

Implants-2017 EMD’.

3. Bidders who claim exemption from EMD must produce a valid exemption certificate issued by the concerned

authorities like Micro and Small Enterprises (MSEs) of Micro, Small-Scale and Medium enterprises which are

registered with Central Purchase Organization or the concerned Ministry of Department.

4.The EMD amount of unsuccessful tenderers shall be refunded within one month after the award of work to the

successful tenderer without interest. Hence the tenderers should submit an ADVANCE RECEIPT affixing

with the Revenue stamp along with the full particulars of the Bank details in order to credit the amount

through ECS. This receipt should be kept in the envelope for EMD and sent through post / hand over to

person as per instructions.

5. The right to ignore / reject any tender, which fails to comply with the above instructions, is reserved.

Tender will be opened on the due date 13.11.2017 , 11.30 AM ESIC Hospital, K.K nagar, Chennai in the

presence of bidders or their authorized representative. If due date of opening is declared holiday, tender will be

opened on the next working day at the same time and the Dean, reserves the right to reject any tender or all

without assigning any reason(s) thereof.

PG:2

DEAN

ESIC MEDICAL COLLEGE AND HOSPITAL, CHENNAI

CONDITIONS OF CONTRACT

GENERAL TERMS AND CONDITION: Annexure-II

Date of Publishing of Tender: 17.10 .2017 and

Last Date of applying online Tender: 13.11.2017 upto 11:00 AM

Date & Time of Opening of Tender : 13.11.2017 at 11:30 AM

Earnest Money Rs. 25000/-

Security Money -10% of value of the Contract.

1. Tenders will be opened at ESIC Medical College and Model Hospital, K.K.Nagar, Chennai-78, on the

stipulated date and time in the presence of the tenderers / representatives who choose to be present.

• Pre-Qualification Criteria :

a) The tendrer should have authorized business centre / service provider in and around Chennai and the

complete postal address, Telephone, Mobile, Fax, E-mail etc should be provided while submitting the complete

tender form.

• b) Bidder should be the manufacturer / authorized dealer / Distributor / Trader / Supplier. Letter

of Authorization from Manufacturer for the same and specific to the tender should be uploaded

in the prescribed place.

c)An undertaking from the original Manufacturer is required stating that they would facilitate the bidder on

regular basis with technology / product updates and extend support whenever necessary. The scanned copy of the

same to be uploaded.

• The two part bids i.e. a).Technical Bid and b).Price bid shall comprise of the following:

(A) Technical Bid

The following documents are the vital documents which should be uploaded by

the Bidder along with Technical Bid as per the tender document for getting qualified.

a) Scanned Copy of EMD Cost.

b) Mention the status of the bidder - Manufacture / Distributor / Dealer / Trader / Supplier supporting

documents.

c) In case of distributor / dealer / trader / supplier must be upload tender specific authorization

certificate from OEM/ manufacturer .

d) Copy of PAN Card.

e) Firm / Company registration certificate.

f) GST registration certificate .

g) Income Tax Return of last three years.

h) Tenderer must provide evidence of experience / supplied materials as mentioned in tender document

i) Annual turnover & balance sheet of last three year duly certified by CA as mentioned in tender

document.

j) Declaration by the Bidder should be uploaded as mentioned in tender document.

k) Relevant brochure / catalogue pertaining to the items quoted with full specifications etc.

l) Tenderer must provide a certificate on letter head that proprietor / firm has never been black listed

by any organization should be uploaded.

m) Technical Specifications Compliance Report.

PG:3

n) Previous history of records for the supply of items in any Government/ Reputed private

Organization.

o) Certification in your letter head that price quoted is not higher than previously supplied to any

Government Institute/ Organization / Reputed Private Organization or DGS&D in any recent

records.

p) Without fulfillment of the said above records from (a to o) your bid gets rejected without any reason.

(B) Price Bid

a) The information given in the Techno-commercial bid should reproduced once again in

the price bid with indication of PRICES. Any deviation will liable to rejection.

a) Rates should be typed in words as well as in figures, free from erasing, cutting and overwriting.

b) Price quoted should match with the items quoted in technical bid.

c) Successful bidder shall not be entitled to any rate revision of price for any reason except that

allowed by Government of India.

d) In case any variation in the price quoted is found the bid automatically be cancel.

e) The quoted price should be all inclusive lump sum price offered for each item , freight, Insurance,

transit insurance, packing forwarding etc., . Rates and GST must be quoted separately.

f) The rates quoted should be F.O.R ESIC PGIMSR & Model Hospital, K.K. Nagar, Chennai - 78. No

other charges in addition will be payable on any account over and above the lump sum price quoted

in the price bid. The rates quoted in ambiguous terms such as "Freight on actual basis" or " Taxes as

applicable extra" or "Packing forwarding extra" will render the bid liable for rejection.

g) Opening of the Technical bid will be the first stage on the mentioned date in the presence of the

bidders who choose to be present. The price bid of the firm whose items are technically fulfilling the

specifications and other conditions, will be considered for evaluation.

h) For imported goods, the price quoted shall not be higher than the lowest price charges by the

tenderer for the goods of the same nature, class or description to a purchaser, domestic or foreign or

to any organization or department of Govt. of India.

i) If it is found at any stage that the goods as stated have been supplied at a lower price, than that price,

with due allowance for elapsed time will be applicable to the present case and the difference in cost

would be refunded by the supplier to the purchaser, if the contract has already been concluded.

• Tender currencies :

The tenderer supplying indigenous goods shall quote only in Indian Rupees.

• Validity of Tender :

• Tender will be valid for a period of TWO YEARS from the date of signing of agreement.

• Right of Acceptance : ESIC Hospital, K.K.Nagar reserves the right to accept or reject any or all

tenders / quotations without assigning any reason there of and also does not bind itself to accept

the lowest quotation or any tender. ESIC Hospital, K.K.Nagar also reserves the rights to accept

all the implants items in the given tender or only part of it in any given schedule without

assigning any reason.

• Subletting of contract : The firm shall not assign or sublet the contract or any part of it to any

other person or party without having first obtained permission in writing of ESIC Hospital,

K.K.Nagar, which will be at liberty to refuse if thinks fit. The tender is not transferable.

PG:4

• Either the authorized Indian agent on behalf of the principal/OEM or principal/OEM himself can

bid but both cannot bid simultaneously for the same item/product in the same tender.

• If an agent submits bid on behalf of the principal/OEM, the same agent shall not submit a bid on

behalf of another principal/OEM in the same tender for same item/product.

• Bidders in their own interest shall ascertain the eligibility of whatsoever concessions and

exemptions are eligible and applicable to the ESIC PGIMSR & Model Hospital, K.K. Nagar,

Chennai and shall advise the purchaser and quote accordingly.

• The firm should be registered and should have the average annual turnover of at least

Rs.______(Two times of the value of contract) of the bidder in the last three financial years.

Copies of authenticated balance sheet for the past three years should be uploaded.

• As per GFR 2017 due consideration will be given to start ups.

• Demonstration of equipment :

◦ Tenderer should be able to demonstrate the product quoted by them, to the Technical

Evaluation Committee in Chennai within one week from the date of opening of tender or as

per the communication given by this office.

◦ The company will get only one chance for demonstration. In case, the company fails to

arrange the demonstration, the bid shall be liable to cancellation.

◦ The date for demonstration shall be fixed with mutual consent on telephone/e-mail and the

same shall be confirmed in writing or by fax. In any case, not more than two weeks time

shall be given to arrange for demonstration.

◦ OPENING OF PRICE BID: Price bid will be done by fixing a date publishing in the

websites and necessary communication given to the bidders /authorized dealers/

representatives only those technically qualified bidders will be considered for

PRICE BID opening.

• Security Deposit :

◦ The successful bidder shall have to submit a performance guarantee (PG) within 30 days from

the date of issue of Letter of Award (LOA). Extension of time for submission of PG beyond 30

days band up to 60 days from the date of issue of LOA may be given by the competent authority

to sign the contract agreement however a panel interest of 15% per annum shall be charged for

the delay beyond 30 days. i.e., 31st day after the date of issue of LOA. In case of the contract

fails to submit the requisite PG even after 60 days from the date of issue of LOA the contract

shall be terminated duly forfeiting the EMD and other dues if any payable against the contract.

The failed contractor shall be debarred from participating in re-tender (if any) for that item.

Performance Guarantee Bond is mandatory.

◦ Validity of the performance guarantee bond shall be for a period of 60 days beyond of entire

contract period from the date of award of contract.

◦ After Completing of contract period successfully on receipt of Performance security Deposit will

be released.

PG:5

Signing of Mou: The Successful bidder has to sign Mou for fulfilling the terms

and conditions of the tender for till the validity of contract. Specimen

copy of the Memorandum of Understanding is given below:

AGREEMENT for the supply of ORTHO IMPLANTS UNDER RATE CONTRACT FOR TWO YEARS

Agreement made this __________day of ______ 2017 at ESIC Medical College and Model Hospital,

K.Knagar, Chennai-78 between M/s._________ having its registered office at_______ (hereafter referred to as

“Supply for ORTHO IMPLANTS” which term should include its successors, representatives, hires, executors and

administrators unless excluded by contract) on one part and ESIC Medical College and Model Hospital, K.K nagar,

Chennai-600 078, Tamilnadu on the other part.

Whereas ESIC-Medical college and Model Hospital desires to purchase ORTHO IMPLANTS for its

hospital at K.K nagar, Chennai-600 078 and Whereas the Contractor has agreed to provide the same in the manner

and under the terms and conditions hereinafter mentioned.

Now this agreement witness and it is agreed by and between both the parties as follows:

The term “Agreement”, wherever used in this connection, shall mean and include the terms and conditions

in tender floated by the ESIC Medical college and Model hospital,K.K nagar, Chennai-78 for the supply of ORTHO

IMPLANTS for TWO year period with instructions to tenderer, the conditions of tender, acceptance of tender

particulars hereinafter defined and those general and special conditions that may be added from time to time.

If there is any disruption of supply without any valid reason, the loss to the hospital should be compensated

by the Contractor, not exceeding the cost of the items. Also suitable action as deemed fit will be initiated from ESIC

Medical College and Model Hospital, K.K nagar, Chennai-78.

Further, in the event of late delivery, ESIC Medical College and Model hospital is entitled to recover from

the contractor by way of liquidated damage a sum equal to 5% of the price of the stores delivered late.

This Agreement shall be deemed to have come into force with effect from _________ and it shall remain in force

for a period upto date of _______ and may however be extended for a further period, on mutually agreed terms.

Signed Authorised Signatory

Dean, ESIC Medical College and Model Hospital, Name fo the Contrator(Withfull

address for Communication)

K.Knagar, Chennai-600 078.

Disputes and Jurisdiction: Wherever disputes arise during implementation of a contract,

legal advice should be sought before initiating action to refer the dispute to conciliation and / or

arbitration as provided in the contract or to file a suit in the jurisdiction of Madras.

• Delivery Schedule : Within 14 days from the date of purchase order. The delivery should be at

the place shown by the receiving officer within the premises of the ESIC Hospital, K.K.Nagar at

the cost of the supplier. For imported items, an enhanced delivery period, if required can be

agreed and the same should be indicated clearly.

• No articles shall be supplied to the hospital except on requisition in writing signed by the Dean

or by an officer authorized by him/her in writing to do so.

• Penalty : If the successful tenderer fails to execute the supply within the stipulated period,

penalty of 5% of the value of the order will be levied. Failure to execute the supply will lead to

cancellation of supply order and the Performance security will stand forfeited and the vendor

will not be allowed to participate in the re-tender for the items.

• Payment :The payment towards the supply is subject to receipt of inspection note/performance

certificate to the effect that the items supplied are conforming to the purchase order placed.

• PG:6

SCHEDULE OF REQUIREMENTS OF ORTHO IMPLANTS ITEMS: Annexure-III

TECHNICAL DETAILS:

ANNEXURE –IV

TENDER FOR THE SUPPLY OF ORTHO IMPLANTS FOR THE ESIC HOSPITAL, K.K NAGAR CHENNAI-78

From

__________________

__________________

__________________

__________________

To

The DEAN,

ESIC Hospital, K.K.Nagar,

Chennai - 600 078.

Sub: Request for refund of EMD Amount – reg.

* * *

We have pleasure in submitting our tenders for the ……………………………….;……..as per

.Annexure -I…………………………

We enclose herewith a Demand Draft No. ………………..Dt………….. for Rs. /-- drawn in favor of

ESIC Fund A/c. No:1 payable at Chennai towards Earnest money Deposit.. We bind ourselves to the conditions

prescribed in the Tender Notification. We agree to have the Earnest money forfeited in case of failure in full or

part to undertake the contract upon the acceptance of this tender.

With reference to your advertisement dated __________________, we have submitted tender for

____________ (Orthopedic Implants ).In case we are not the successful bidder, we request you to kindly refund

the EMD amount of Rs._______. Through ECS may be kindly be drawn in favor of___________________

Beneficiary’s Name :

Account No. :

A/C Savings Current :

IFSC Code No. :

Bank Name :

Branch Name & Address :

Yours faithfully,

(SIGNATURE & SEAL)

PRE-RECEIPT

Received an amount of Rs…………………………… vide cheque No..........................dated.................. from ESI

Corporation towards refund of EMD amount.

Revenue

Stamp

(SIGNATURE & SEAL)

PG:7

ANNEXURE – V

Tender Application Form (TECHNICAL BID)

1 Name of the firm:-

2

a Full Postal Address:-

b Cell Phone No.

c Telephone No:-

d Fax No.

e Email Id:

3 Date of Establishment of Firm:-

4

a If your Firm Registered under:-

b The Indian Factories Act:-

c Any other Act, if not, who are the owners (Please give full address):-

5 Name and Address of your Bankers stating the name in which the

Account stands:-

6 Whether insured against fire, theft, burglary etc. If so, please state the

amount and name of company with policy no:-

7 Total number of Employees:-

8 Are you in the list of approved contractors of any other organizations /

institutions, if any give details (Append extra page if necessary):-

9 Give details of any Government contracts executed during the last

twelve months (Append extra page if necessary):-

10 Any other information which you consider necessary to furnish:

UNDERTAKING:

a. I, the undersigned certify that I have gone through the Conditions of Contract mentioned in the tender document

and undertake to comply with them.

b. The rates quoted by me are valid and binding upon me for the entire period of contract and it is certified that the

rates quoted are the lowest quoted for any other institution/ hospital in India.

c. I/ We give the rights to Dean, ESI-PGIMSR,ESIC Medical College and ESIC Hospital Chennai to forfeit the

EMD/Security money deposit by me/us if any delay occur on my part/ failure to supply the article within the

stipulated date and time or of the desired quality a per specification.

d. There is no vigilance/CBI case or court case pending against the firm.

e. I hereby to undertake to complete the work as pr directions given in the tender document /work order with

stipulated period.

f. I hereby certify that none of the family member (s) is/ are employed in ESIC as per details given in the tender

document. In case at any stage, it is found that information given by me is false/ incorrect. ESIC Medical College and

Hospital Chennai shall have the absolute right to take any action as deem fit. The decision of the Dean and legally

binding to me / us in such cases.

Date:- Signature of the tenderer:-

Place:- Full Name:-

Designation:-

(Office seal of the tenderer):-

PG:8

ANNEXURE-VI

DECLARATION FORM

We ………………………………………………………………..having our office

at………………………………………………………………………………….do declare that we have carefully

read all the conditions of Tender for the supply of Orthopedic Implants and abide by all the conditions set forth

therein by the DEAN, ESIC Medical College and Model Hospital , K.K.Nagar, Chennai 78.

We further declare that we ……..………………………..possesses valid license bearing

No…………………………………………………… valid upto……..

DATE: SIGNATURE:

SEAL:

NAME & ADDRESS:

SCHEDULE OF PRICE BID (ANNEXURE-VII)

FORMAT FOR QUOTATION OF RATE FOR SUPPLY OF ORTHO IMPLANTS TO THE ESIC

HOSPITAL K.K NAGAR, CHENNAI-78.

Tenderer must quote the rates strictly as per the given format.

* Rates both in numbers and words Comparative Price evaluation of the above items will be done on the basis of price per unit as

applicable.

Item

No.

Item Name and

Specification

Manufacturer

/ Brand

Authorized

Dealer

Packing Rate per

Unit in (Rs)

GST%

THE FIRM IS REQUESTED TO FOLLOW THE CHECK LIST AT THE TIME OF SUBMISSION OF TENDER DOCUMENT WITHOUT WHICH THE OFFER IS LIABLE TO BE CANCELLED.

1 The Demand Draft for EMD to be submitted before the time period of

Opening of tender.(Without fail or any Delay) Failing which directly liable

to rejected from the participation of tender. Even though fee paid for online

processing of the tender .

Submitted [Yes / No ]

2 Valid Trade License Submitted [Yes / No ]

3 GST/PAN/TAN other statutory documents Submitted [Yes / No ]

4 The average Annual Turnover of the tenderer in the preceding 3 years Submitted [Yes / No ]

5 Tenderer to give an affidavit that the company has not been blacklisted by

any Govt./Semi Govt./Govt. Undertaking /Institution During last three

years &Bank Details

Submitted [Yes / No ]

6 Supplier should provide certificate regarding rate quoted as per

instructions

Submitted [Yes / No ]

7 Satisfactory performance Certificate from a Govt. Institution/ Reputed

Institution for last three years

Submitted [Yes / No ]

8 Undertaking on Non-Judicial stamp paper of Rs.100/- Submitted [Yes / No ]

THE DEAN OF MEDICAL COLLEGE AND MODEL HOSPITAL CHENNAI-78 , HAS THE

RIGHT AND DISCRETION TO ACCEPT OR REJECT OR CANCEL THE TENDER/TENDER PROCESS AT

ANY STAGE WITHOUT ASSIGNING ANY REASON .

Dated :

Signature of Authorized Signatory

(With rubber stamp)

PG:9

SCHEDULE OF REQUIREMENTS OF ORTHO IMPLANTS ITEMS: Annexure-III

Item No.

Item Name and

Specification

1 3.5 mm Asian DCP 4 holes to maximum length

2 4 holes

3 5 holes

4 6 holes

5 7 holes

6 8 holes

7 9 holes

8 10 holes

9 11 holes

10 12 holes

11 13 holes

12 14 holes and above

13 3.5 mm cortical screws

14 10mm

15 12mm

16 14mm

17 16mm

18 18mm

19 20mm

20 22mm

21 24mm

22 26mm

23 28mm

24 30mm

25 35mm

26 40mm

27 45mm

28 50mm

29 1/3rd tubular plate 4 holes to maximum holes

30 4 holes

31 5 holes

32 6holes

33 7 holes

34 8 holes

35 9 holes

36 10 holes

37 11 holes

38 12 holes

39 4.0mm cancellous screws smallest to longest

40 20mm

41 25mm

42 30mm

43 35mm

44 40mm

45 45mm

46 50mm

47 55mm

48 60mm

49 65mm

50 70mm

51 75mm

52 80mm

53 85mm

54 90mm

55 others

56 3.5 mm Reconstruction plates (smallest to longest )

57 4 holes

58 5 holes

59 6 holes

60 7 holes

61 8 holes

62 9 holes

63 10 holes

64 11holes

65 12 holes

66 13 holes

67 14 holes

68 15 holes

69 Y plates 3.5mm - smallest to longest

70 3 holes

71 4 holes

72 5holes

73 6 holes

74 7holes

75 4.5 mm Narrow DCP - smallest to longest

76 6 holes

77 7 holes

78 8 holes

79 9 holes

80 10 holes

81 11 holes

82 12 holes

83 13 holes

84 14 holes

85 others

86 4.5 mm Broad DCP - smallest to longest

87 6 holes

88 7 holes

89 8 holes

90 9 holes

91 10 holes

92 11 holes

93 12 holes

94 13 holes

95 14 holes

96 others

97 4.5 mm cortical screws

98 10mm

99 12mm

100 14mm

101 16mm

102 18mm

103 20mm

104 22mm

105 24mm

106 26mm

107 28mm

108 30mm

109 35mm

110 40mm

111 45mm

112 50mm

113 others

114 6.5 mm Cancellous screws

115 20mm

116 25mm

117 30mm

118 35mm

119 40mm

120 45mm

121 50mm

122 55mm

123 60mm

124 65mm

125 70mm

126 75mm

127 80mm

128 85mm

129 90mm

130 95mm

131 100mm

132 105mm

133 others

134 4.0 mm Cannulated Cancellous screws

135 20mm

136 25mm

137 30mm

138 35mm

139 40mm

140 45mm

141 50mm

142 55mm

143 60mm

144 65mm

145 70mm

146 75mm

147 80mm

148 85mm

149 90mm

150 95mm

151 100mm

152 others

153 Guide wire for 4.0 mm Cannulated Cancellous screws

154 Drill bit for 4.0 mm Cannulated Cancellous screws

155 6.5mm Cannulated Cancellous screws

156 20mm

157 25mm

158 30mm

159 35mm

160 40mm

161 45mm

162 50mm

163 55mm

164 60mm

165 65mm

166 70mm

167 75mm

168 80mm

169 85mm

170 90mm

171 95mm

172 100mm

173 others

174 Guide wire for 6.5 mm Cannulated Cancellous screws

175 Drill bit for 6.5mm Cannulated cancellous screw

176 4.5 mm Malleolar screw

177 40mm

178 45mm

179 50mm

180 55mm

181 60mm

182 65mm

183 70mm

184 75mm

185 80mm

186 others

187 3.2 mm Drill bit

188 3.5mm drill bit

189 4 mm drill bit

190 4.5 mm drill bit

191 others

192 2.00 mm drill bit / /

193 2.5 mm Drill bit.

194 2.7 mm drill bit

195 4.5 mm Semi tubular plate titanium ( smallest to longest )

196 4 holes

197 5 holes

198 6holes

199 7 holes

200 8 holes

201 9 holes

202 10 holes

203 11 holes

204 12 holes

205 4.5mm T buttress plates - smallest to longest

206 4 holes

207 5 holes

208 6holes

209 7 holes

210 8 holes

211 9 holes

212 10 holes

213 11 holes

214 12 holes

215 4.5mm L Buttress plates – smallest to longest

216 4 holes

217 5 holes

218 6holes

219 7 holes

220 8 holes

221 9 holes

222 10 holes

223 11 holes

224 12 holes

225 4.5 mm clover Leaf plate smallest to longest

226 4 holes

227 5 holes

228 6holes

229 7 holes

230 8 holes

231 9 holes

232 10 holes

233 11 holes

234 12 holes

235 4.5 mm Lateral tibial plate – smallest to longest

236 4 holes

237 5 holes

238 6holes

239 7 holes

240 8 holes

241 9 holes

242 10 holes

243 11 holes

244 12 holes

245 13 holes

246 14 holes

247 15 holes

248 3.5 mm T buttress plate – smallest to longest

249 4 holes

250 5 holes

251 6holes

252 7 holes

253 8 holes

254 9 holes

255 10 holes

256 11 holes

257 12 holes

258

K-wires

1mm

259 1.2mm

260 1.5mm

261 1.8mm

262 2.0mm

263 2.5 mm

264 3.0mm

265 4.0mm

266 SS WIRES 16 G

267 18G

268 20G

269 22 G

270

TITANIUM elastic Nail

2.00 mm

271 2.5mm

272 3.0mm

273 3.5mm

274 4.0mm

275 DHS plate 4 holes

276 5 holes

277 6holes

278 7 holes

279 8 holes

280 9 holes

281 10 holes

282 11 holes

283 12 holes

284 13 holes

285 14 holes

286 15 holes

287 DCS Plate 4 holes

288 5 holes

289 6holes

290 7 holes

291 8 holes

292 9 holes

293 10 holes

294 11 holes

295 12 holes

296 13 holes

297 14 holes

298 15 holes

299 Double angled blade plate 6 holes

300 6.5mm lag screw for DHS AND DCS PLATES 45mm

301 50mm

302 55mm

303 60mm

304 65mm

305 70mm

306 75mm

307 80mm

308 85mm

309 90mm

310 95mm

311 100mm

312 others

313 Guide wire for DCS and DHS plate

314 Universal external fixator

315 - Rod smallest ot longest

316 150 mm

317 200 mm

318 250 mm

319 300 mm

320 350 mm

321 400 mm

322 - Steinmann pin of length 220 mm

323 3 mm

324 4 mm

325 5 mm

326 6 mm

327 - Conical Schanz screw

328 4.5mm

329 5.0 mm

330 6.0 mm

331 - Universal clamps

332 - Tube to tube clamp

333 - T-Clamp

334 Limb Reconstruciton System ( LRS )

335 - Conical Scahnz Screw

336 5 mm

337 6 mm

338 - Railing with 3 clamps

339 - Railing with 4 clamps

340 - Railing with transverse clamps ( T Clamp )

341 - orthofix T ball and scoket clamp

342 - orthofix sweil clamp

343 - ortho fix T clamp

344 - orthofix trochanteric clamp.

345 - allen key

346 - Compression and Distraction unit

347 - 4.3 drill bit

348 Limb reconstruciton sysem for forearm and Paediatric

349 - Railing with 3 clamps

350 - conical schanz srew

351 3 mm

352 4 mm

353 Drill bit

354

Pennigs external fixator including 4 schanz screw and allen key and 2 mm drill

bit

355 Illizarov ring fixator

356 - Conical schanz screw

357 4.5 mm

358 5.00 mm

359 6.0 mm

360 - Bayonet K-wire 1.8mm

361 - Olive wire1.8mm

362 - Nuts

363 - Bolts

364 10 mm

365 16 mm

366 - Wire fixation bolt

367 slotted/

368 cannulated

369 - Threaded rod

370 150 mm

371 200 mm

372 250 mm

373 300 mm

374 350 mm

375 400 mm

376 - Male post

377 2 holes

378 3 holes

379 4 holes

380 - Female post

381 2 holes

382 3 holes

383 4 holes

384 - Rancho cubes

385 1 hole

386 2 holes

387 3 holes

388 - Extension p late

389 2 holes

390 3 holes

391 4 holes

392 5 holes

393 - Clamps for hybrid fixator

394 - Spanner size ( box in one side and normal type in other side)

395 10mm/11mm

396 12mm/13mm

397 - Hinges male and female

398 - CARBON Half ring

399 80mm

400 100mm

401 120mm

402 140mm

403 160mm

404 180mm

405 200mm

406 220mm

407 240mm

408 - CARBON 5/8 ring

409 140mm

410 160mm

411 180mm

412 - Washers ordinary

413 - Washers conical

414 - Illizarov Telescopic Graduated Distraction Rod of various length

415 Femur Interlocking Nailing – piriformis entry point

416 Interlocking Nail

417 Interlocking screws

418 Interference screws 8mm/9mm of all sizes

419 8 mm x 20 mm

420 8 mm x 25 mm

421 8 mm x 30 mm

422 8 mm x 35 mm

423 8 mm x 40 mm

424 9 mm x 20 mm

425 9 mm x 25 mm

426 9 mm x 30 mm

427 9 mm x 35 mm

428 9 mm x 40 mm

429 Coventry staples

430 Ordinary staplles

431 120 degree angled blade plate for hip joint surgery 4 holed

432 Suture Anchor

433 2.4 mm with needle

434 2.8 mm

435 3.0 mm

436 3.0 mm ( absorbable )

437 3.5 mm

438 4.5 mm

439 5.0 mm

440 5.5 mm

441 5.5 mm ( absorbable )

442 Suture anchor inserter with trochar and cannula

443 AC joint Tie brow system implant

444 Square nail of all sizes for radius

445 2.0 mm

446 2.5 mm

447 3.0 mm

448 3.5 mm

449 4.0 mm

450 ACL Reconstruction implants ( for tibial side and endobutton on femoral side )

451 bioabsorable screws – 20 mm

452 bioabsorable screws – 25 mm

453 bioabsorable screws – 30 mm

454 bioabsorable screws - 35mm

455 bioabsorable screws – 40 mm

456 Endobutton

457 Bioabsorable screws of various types and sizes.

458 4 mm x 30 mm

459 4 mm x 35 mm

460 4 mm x 40 mm

461 4 mm x 45 mm

462 4 mm x 50 mm

463 4.5 mm x 30 mm

464 4.5 mm x 35 mm

465 4.5 mm x 40 mm

466 4.5 mm x 45 mm

467 4.5 mm x 50 mm

468 3 mm x 20 mm

469 3 mm x 25 mm

470 3 mm x 30 mm

471

Proximal humerus Locking compression Plate with corresponding locking and

cortical screws

472 3 hole plate

473 4 hole plate

474 5 hole plate

475 6 hole plate

476 7 hole plate

477 8 hole plate

478 9 hole plate

479 10 hole plate

480 11 hole plate

481 12 hole plate

482 13 hole plate

483 3.5 mm locking compression screws

484 3.5 mm cortical screws

485 Cannulated locking screws

486

Proximal humerus periarticular locking compression plate ( of various lengths)

with corresponding locking and cortical screws

487 2 hole plate

488 3 hole plate

489 4 hole plate

490 5 hole plate

491 7 hole plate

492 9 hole plate

493 11 hole plate

494 3.5 mm locking compression screws

495 3.5 mm cortical screws

496 Cannulated locking screws

497 4mm Cansellous screws

498

4.5mm Broad/ Narrow DCP Locking compression plate ( of various lengths )

with screws

499 4 hole plate

500 5 hole plate

501 6 hole plate

502 7 hole plate

503 8 hole plate

504 9 hole plate

505 10 hole plate

506 11 hole plate

507 12 hole plate

508 13 hole plate

509 14 hole plate

510 15 hole plate

511 4.5 mm/5.00 mm locking compression screws

512 4.5 mm cortical screws

513

Distal Humerus Locking compression plate for Medial side ( of various lengths )

with corresponding locking and cortical screws

514 3 hole plate

515 4 hole plate

516 5 hole plate

517 6 hole plate

518 7 hole plate

519 8 hole plate

520 9 hole plate

521 10 hole plate

522 11 hole plate

523 12 hole plate

524 13 hole plate

525 14 hole plate

526 3.5 mm locking compression screws

527 3.5 mm cortical screws

528 Cannulated locking screws

529 2.7 mm locking screws

530 2.4 mm locking screws

531

Distal Humerus Locking compression plate for lateral side - dorsolateral with

corresponding locking and cortical screws

532 3 hole plate

533 4 hole plate

534 5 hole plate

535 6 hole plate

536 7 hole plate

537 8 hole plate

538 9 hole plate

539 10 hole plate

540 11 hole plate

541 12 hole plate

542 13 hole plate

543 14 hole plate

544 3.5 mm locking compression screws

545 3.5 mm cortical screws

546 Cannulated locking screws

547 2.7 mm locking screws

548 2.4 mm locking screws

549

Distal Humerus variable angle Locking compression plate for Medial side ( of

various lengths ) with corresponding locking and cortical screws

550 1 hole plate

551 2 hole plate

552 3 hole plate

553 4 hole plate

554 5 hole palte

555 6 hole plate

556 7 hole plate

557 8 hole plate

558 3.5 mm locking compression screws

559 3.5 mm cortical screws

560 Cannulated locking screws

561 2.7 mm locking screws

562 2.4 mm locking screws

563

Distal Humerus variable angle Locking compression plate for lateral and

dorsolateral aspect ( of various lengths ) with corresponding locking and cortical

screws

564 1 hole plate

565 2 hole plate

566 3 hole plate

567 4 hole plate

568 5 hole palte

569 6 hole plate

570 7 hole plate

571 8 hole plate

572 3.5 mm locking compression screws

573 3.5 mm cortical screws

574 Cannulated locking screws

575 2.7 mm locking screws

576 2.4 mm locking screws

577

Humerus shaft to lateral condylar locking compression extension plate with

corresponding locking and cortical screws ( distasl humerus extra articular

locking plate )

578 6 holes plate

579 7 holes plate

580 8 holes plate

581 9 hole plate

582 10 hole plate

583 4.5 mm cortical screws

584 4.5mm/5.00mm locking screws

585 3.5 mm cortical screws

586 3.5 mm locking compression screws

587

Proximal olecranon/ulna locking compression plate ( of various lengths ) with

corresponding locking and cortical screws

588 3 hole plate

589 4 hole plate

590 5 hole plate

591 6 hole plate

592 7 hole plate

593 8 hole plate

594 9 hole plate

595 10 hole plate

596 11 hole plate

597 12 hole plate

598 2.7 mm locking screws

599 3.5 mm locking screws

600 3.5 mm cortical screws

601

Proximal olecranon/ulna hook plate with corresponding locking and cortical

screws (side specific if there preferable )

602 3 hole plate

603 4 hole plate

604 5 hole plate

605 6 hole plate

606 7 hole plate

607 8 hole plate

608 9 hole plate

609 10 hole plate

610 11 hole plate

611 12 hole plate

612 2.7 mm locking screws

613 3.5 mm locking screws

614 3.5 mm cortical screws

615

Distal radius variable angle locking compression plate with corresponding

locking and cortical screws ( sterile/non -sterile)

616 3 hole plate

617 4 hole plate

618 5 hole plate

619 2.4 mm variable angle locking compression screws

620 2.4 mm cortical screws

621 2.7 mm cortical screws

622

Distal radius periarticular Locking compression plate with corresponding

locking and cortical screws

623 3 hole plate

624 4 hole plate

625 5 hole plate

626 7 hole plate

627 2.4 mm locking compression screws

628 2.4 mm cortical screws

629 2.5 mm cortical screws

630 3.5mm cortical screws

631 2.5mm locking screws

632

Distal radius juxtra articular Locking compression plate with corresponding

locking and cortical screws

633 3 hole plate

634 4 hole plate

635 5 hole plate

636 2.4 mm locking compression screws

637 2.4 mm cortical screws

638 2.7 mm cortical screws

639

Distal radius dorsal locking compression plate straight and angled and oblique

with corresponding locking and cortical screws

640 3 hole L plate

641 4 holeL plate

642 5 hole L plate

643 3 hole T plate

644 4 hole T plate

645 5 hole T plate

646 2.4 mm locking compression screws

647 2.4 mm cortical screws

648 2.7 mm cortical screws

649

Distal radius T locking compression plate with corresponding locking and

cortical screws ( the longest plate should aid in fixation of metaphyseo-diaphyseal

fracture fixation)

650 3 hole plate

651 4 hole plate

652 5 hole plate

653 6 hole plate

654 7 hole plate

655 8 hole plate

656 9 hole plate

657 10 hole plate

658 11 hole plate

659 12 hole plate

660 2.7 mm locking screws

661 3.5 mm locking screws

662 3.5 mm cortical screws

663 2.4 mm locking screws

664 3.5 mm Locking compression plate and screws

665 3 hole plate

666 4 hole plate

667 5 hole plate

668 6 hole plate

669 7 hole plate

670 8 hole plate

671 9 hole plate

672 10 hole plate

673 11 hole plate

674 12 hole plate

675 15 hole plate

676 3.5 mm cortical screws

677 3.5 mm locking compression screws

678

Distal femur lateral side locking compression plate of various lengths with

corresponding locking and cortical screws( preferable with MIS instruments)

679 4 hole plate

680 5 hole plate

681 6 hole plate

682 7 hole plate

683 8 hole plate

684 9 hole plate

685 10 hole plate

686 11 hole plate

687 12 hole plate

688 13 hole plate

689 14 hole plate

690 15 hole plate

691 16 hole plate

692 17 hole plate

693 18 hole plate

694 19 hole plate

695 4.5 mm/5.00 mm locking compression screws

696 4.5 mm cortical screws

697 6.5mm Cancellous screws

698 6.5 mm conical cancellous screw

699

Proximal tibial lateral locking compression plate 3.5mm with corresponding

locking and cortical screws

700 3 hole plate

701 4 hole plate

702 5 hole plate

703 6 hole plate

704 7 hole plate

705 8 hole plate

706 9 hole plate

707 10 hole plate

708 11 hole plate

709 12 hole plate

710 13 hole plate

711 14 hole plate

712 15 hole plate

713 3.5 mm locking compression screws

714 3.5 mm cortical screws

715 3.5 mm cannulated locking compression screws

716 4.00 mm partially threaded cancellows screws

717

Proximal tibial lateral locking compression plate 4.5/5.00 mm system with

corresponding locking and cortical screws

718 3 hole plate

719 4 hole plate

720 5 hole plate

721 6 hole plate

722 7 hole plate

723 8 hole plate

724 9 hole plate

725 10 hole plate

726 11 hole plate

727 12 hole plate

728 13 hole plate

729 14 hole plate

730 15 hole plate

731 4.5mm cortical screws

732 4.5mm/5.00 mm locking compression screws

733 6.5 mm cancellous screws partially threaded

734 Medial High tibial osteotomy Plate

735 4 holes

736 4.5 mm coritical screws

737 5.0 mm locking compression screws

738 Lateral high tibial osteotomy Plate

739 3 holes

740 4.5 mm coritical screws

741 5.0 mm locking compression screws

742 Lateral distal femur osteotomy Plate

743 4 holes

744 4.5 mm coritical screws

745 5.0 mm locking compression screws

746 Metaphyseal Plate 3.5/4.5/5.0

747 3 hole plate

748 4 hole plate

749 5 hole plate

750 6 hole plate

751 7 hole plate

752 8 hole plate

753 9 hole plate

754 10 hole plate

755 11 hole plate

756 12 hole plate

757 13 hole plate

758 14 hole plate

759 15 hole plate

760 4.5mm cortical screws

761 4.5mm/5.00 mm locking compression screws

762 3.5 mm Locking compression screws

763 3.5 mm cortical screws

764 Proximal tibial L buttress locking copression plates 4.5/5 mm system

765 3 hole plate

766 4 hole plate

767 5 hole plate

768 6 hole plate

769 7 hole plate

770 4.5mm cortical screws

771 4.5mm/5.00 mm locking compression screws

772 Proximal tibial T buttress locking compression 4.5/5 mm

773 3 hole plate

774 4 hole plate

775 5 hole plate

776 6 hole plate

777 7 hole plate

778 4.5mm cortical screws

779 4.5mm/5.00 mm locking compression screws

780

Proximal tibial posteromedial locking compression plate ( preferable if variable

angle )and corresponding locking and cortical screws

781 3 hole plate

782 4 hole plate

783 5 hole plate

784 6 hole plate

785 7 hole plate

786 8 hole plate

787 9 hole plate

788 10 hole plate

789 11 hole plate

790 12 hole plate

791 3.5 mm variable angle locking compression screws

792 3.5 mm variable angle cortical screws

793

Proximal tibial Medial tibial locking compression plate with corresponding

locking and cortical screws

794 3 hole plate

795 4 hole plate

796 5 hole plate

797 6 hole plate

798 7 hole plate

799 8 hole plate

800 9 hole plate

801 10 hole plate

802 11 hole plate

803 12 hole plate

804 13 hole plate

805 14 hole plate

806 15 hole plate

807 17 hole plate

808 18 hole plate

809 19 hole plate

810 20 hole plate

811 3.5 mm locking compression screws

812 3.5 mm cortical screws

813

Distal Medial Tibial Locking compression plate with corresponding locking and

cortical screws

814 3 hole plate

815 4 hole plate

816 5 hole plate

817 6 hole plate

818 7 hole plate

819 8 hole plate

820 9 hole plate

821 10 hole plate

822 11 hole plate

823 12 hole plate

824 13 hole plate

825 14 hole plate

826 15 hole plate

827 3.5 mm locking compression screws

828 3.5 mm cortical screws

829

Distal tibial anterolateral locking compression plate with corresponding locking

and cortical screws

830 3 hole plate

831 4 hole plate

832 5 hole plate

833 6 hole plate

834 7 hole plate

835 8 hole plate

836 9 hole plate

837 10 hole plate

838 11 hole plate

839 12 hole plate

840 13 hole plate

841 14 hole plate

842 15 hole plate

843 3.5 mm locking compression screws

844 3.5 mm cortical screws

845 Calcaneal Locking compression plate 3.5 mm system

846 3.5 mm plate

847 3.5 mm locking compression screws

848 3.5 mm cortical screws

849 Clavicle Locking compression plates 3.5 mm

850 6 hole plate

851 7 hole plate

852 8 hole plate

853 9 hole plate

854 10 hole plate

855 11 hole plate

856 12 hole plate

857 3.5 mm locking compression screws

858 3.5 mm cortical screws

859

Clavicle Locking compression plates for lateral clavicular fracture with

corresponding locking and cortical screws

860 6 hole plate

861 7 hole plate

862 8 hole plate

863 9 hole plate

864 10 hole plate

865 11 hole plate

866 12 hole plate

867 3.5 mm locking compression screws

868 3.5 mm cortical screws

869 2.7mm locking compression screws

870 Subacromial lateral clavicular hook plate

871 3 hole plate

872 4 hole plate

873 5 hole plate

874 3.5 mm locking compression screws

875 3.5 mm cortical screws

876 2.7mm locking compression screws

877

3.5 mm Pelvic Reconstruction plate of various sizes and lengths ( this only in

stainless steel )

878 3.5 mm Straight Pelvic Reconstruction plates

879 5 holes

880 6 hole plate

881 7 hole plate

882 8 hole plate

883 9 hole plate

884 10 hole plate

885 11 hole plate

886 12 hole plate

887 13 hole plate

888 14 hole plate

889 15 hole plate

890 16 hole plate

891 17 hole plate

892 18 hole plate

893 19 hole plate

894 20 hole plate

895 21 hole plate

896 22 hole plate

897 PELVIC J Plate

898 10 hole plate

899 11 hole plate

900 12 hole plate

901 13 hole plate

902 14 hole plate

903 15 hole plate

904 16 hole plate

905 Reconstruction plate 3.5 mm Low profile straight

906 3 hole plate

907 4 hole plate

908 5 holes

909 6 hole plate

910 7 hole plate

911 8 hole plate

912 9 hole plate

913 10 hole plate

914 11 hole plate

915 12 hole plate

916 13 hole plate

917 14 hole plate

918 15 hole plate

919 16 hole plate

920 17 hole plate

921 18 hole plate

922 19 hole plate

923 20 hole plate

924 21 hole plate

925 22 hole plate

926 Reconstruction low profile 3.5 curved plate

927 6 hole plate

928 7 hole plate

929 8 hole plate

930 9 hole plate

931 10 hole plate

932 11 hole plate

933 12 hole plate

934 13 hole plate

935 14 hole plate

936 15 hole plate

937 16 hole plate

938 PELVIC spring plate 3.5

939 Symphyseal plate 3.5

940

3.5mm Long cortical screws stainless for to be used in 3.5 mm pelvic

reconstruction plates

941 10 mm to 50 mm

942 55 to 110 mm

943 Drill bit

944 Headless compression screws of various sizes 2.4 mm

945 20mm

946 22mm

947 24mm

948 26mm

949 28mm

950 30 mm

951 32mm

952

Metacarpal and metatarsal plates and also for Phalanges ( including L and T

plate and straight ) Locking compression plates with corresponding locking and

cortical screws

953 Adapt plates 1.5/2.omm

954 Strut plates o blique andle 1.5/2.0 mm

955 T plate 1.5/2.0mm

956 Y plate 1.5/2.0mmMinii condyl eplates 1.5/2.0mm

957 LCP 2 straight plates

958 LCP T plate 2 shaft plates

959 Cortical screws 1mm ( 6 to 14 mm)

960 Cortical screws 1.3mm ( 6 to 18 mm)

961 Cortical screws 1.5mm ( 6 to 24 mm)

962 Cortical screws 2 mm ( 6 to 38 mm)

963 Cortical screws 2.4mm ( 10 to 30 mm)

964 Cortical screws 2.7mm ( 10 to 30 mm)

965 Locking screws 2 mm 6 to 30 mm

966 Locking screws 2.7 mm 6 to 30 mm

967 Distal Ulna hook plate

968 Plate

969 Cortical screws 2 mm ( 6 to 38 mm)

970 Cortical screws 2.4mm ( 10 to 30 mm)

971 Cortical screws 2.7mm ( 10 to 30 mm)

972 Locking screws 2.4 mm 6 to 30 mm

973 Locking screws 2.7 mm 6 to 30 mm

974 TALUS Plate 2.4/2.7mm

975 Cortical screws 2.4mm ( 10 to 30 mm)

976 Cortical screws 2.7mm ( 10 to 30 mm)

977 Locking screws 2.4 mm 6 to 30 mm

978 Locking screws 2.7 mm 6 to 30 mm

979 Other special locking plates and corresponding screws

980

Periprosthetic fracture fixation system ( it includes fractures in and around

hip,knee,shoulder replacement ) - mention the plate with corresponding screws ,

cable system, special attachment plate with corresponding screws if any to be

included in the system

981 4.5/5.00 Broad curved locking plate

982 12 hole plate

983 13 hole plate

984 14 hole plate

985 15 hole plate

986 4.5/5.00 Broad curved locking plate

987 16 hole plate

988 17 hole plate

989 18 hole plate

990 19 hole plate

991 20 hole plate

992 21 hole plate

993 22 hole plate

994 4.5 mm cortical screws

995 4.5/5.0mm locking compression screws

996 Cables

997 Locking Attachment plate 3.5 for 4.5/5.0

998 4 holes

999 8 holes

1000 3.5 mm locking screws

1001 Variable angle condylar plate 4.5/5.0

1002 6 hole plate

1003 8 hole plate

1004 10 hole plate

1005 12 hole plate

1006 14 hole plate

1007 16 hole plate

1008 18 hole plate

1009 Variable angle locking periprosthetic screws 4.5/5.0mm ( 8 to 20 mm )

1010 Variable angle locking screws 4.5/5.0mm (14 to 100 mm)

1011 Variable angle cannulated locking screws 4.5/5.0mm 20 to 100 mm

1012 4.5 mm cortical screws 18 to 38 mm

1013 4.5 mm cortical screws 40 to 70 mm

1014 4.5/5.00 mm locking head screws

1015 Variable angle Proximal Tibial plate 3.5 small bend

1016 4 hole plate

1017 6 hole plate

1018 8 hole plate

1019 10 hole plate

1020 12 hole plate

1021 14 hole plate

1022 Variable angle locking screws 3.5 mm (10 to 95 mm)

1023 3.5 mm Locking head screws ( 10 to 75 mm )

1024 3.5 mm cortical screws ( 10 to 50 mm )

1025 Variable angle Proximal Tibial plate 3.5 Large bend

1026 4 hole plate

1027 6 hole plate

1028 8 hole plate

1029 10 hole plate

1030 12 hole plate

1031 14 hole plate

1032 Variable angle locking screws 3.5 mm (10 to 95 mm)

1033 3.5 mm Locking head screws ( 10 to 75 mm )

1034 3.5 mm cortical screws ( 10 to 50 mm )

1035

Proximal femoral locking compression plate with corresponding locking and

cortical screws( Preferable with MIS instruments to Avoid radiation)

1036 Proximal femoral plate

1037 2 holes to 10 holes plate

1038 12 to 18 hole plate

1039 5.7 mm cannulated locking screws

1040 4.5/5.0 mm locking screws

1041 4.5 cortical screws

1042 6.5 mm cancellous screws

1043 Cable and saddle system

1044 6.5mm conical cancellous screws

1045 1/3 tubular plate locking compression plate

1046 4 hole plate

1047 5 hole plate

1048 6 hole plate

1049 7 hole plate

1050 8 hole plate

1051 9 hole plate

1052 10 hole plate

1053 3.5 mm locking compression screws

1054 3.5 mm cortical screws

1055

Proximal radial bone locking compression plate with corresponding locking and

cortical screw

1056 Proximal Radius plate 2.4 for radial head rim 2 to 4 holes

1057 Proximal Radius plate 2.4 for radial neck 2 T 4 holes

1058 2.4 mm locking compression screws

1059 2.7 mm cortical screws

1060 Antibiotic Absorbale bone cement

1061

Synthetic recrystallised Hemihydrate calcium sulphate, Kit to prepare antibiotic

impregnated resorbable pellets for delivery of antibiotics locally

1062 5cc

1063 10 cc

1064 Bone morphogenic protein

1065 Artificial Bone graft substitutes of various sizes and shapes.

1066 a.Injectable synthetic bone graft susbsitute with all necessary kit

1067 5cc

1068 10cc

1069 15cc

1070 20cc

1071 b.Granules

1072 5cc

1073 10cc

1074 15cc

1075 20cc

1076 c.Wedges

1077 5cc

1078 10cc

1079 15cc

1080 20cc

1081 d. Blocks

1082 5cc

1083 10cc

1084 15cc

1085 20cc

1086

Tibial Interlocking Locking Nail with corresponding interlocking screws (

preferable to have distal targetic device to reduce radiation exposure during

insertion of distal interlocking screws )

1087

Tibial nail of sizes 8,8.5mm9,10 mm,11,12mm,13mm cannulated of length 280

mm to 410 mm

1088 End cap ( 0 to 20 mm )

1089 Locking screws 5/4.5mm for nailing

1090 Locking screws 4.00

1091 Other screws

1092

Expert Tibial Interlocking Nail with corresponding interlocking screws (

preferable to have distal targetic device to reduce radiation exposure during

insertion of distal interlocking screws )

1093 Tibial nail of sizes 8,8.5mm,9,10/11/12/13 mm cannulated ( 280 mm to 410 mm )

1094 End cap ( 0 to 20 mm )

1095 Locking screws 5/4.5mm for nailing 20mm to 50mm

1096 Locking screws 5/4.5mm for nailing 55mm to 110mm

1097 Locking screws 4.00

1098 Other screws

1099

Proximal Femoral Nail (PFN) short /Long Nail– screw / blade for proximal

locking

1100 PFN short 9 mm or 10mm to 13 mm

1101 PFN Long 9/10mm x 300 to 420 mm

1102 PFN Antirotation blade/ screw 60 to 120mm

1103 PFN end cap extension

1104 Locking screws 20mm to 50mm

1105 locking screws 55 to 110mm

1106

Humerus Interlocking Nail with corresponding interlocking screws ( preferable

to have distal targetic device to reduce radiation exposure during insertion of

distal interlocking screws ) with corresponding screws for interlocking

1107 Proximal Humeral nail with multiple locking option in varying diameters

1108 4. mm multilock screws

1109 3.5 mm locking head screws

1110 4.00 mm locking screws

1111 5mm locking screw

1112

Nail system for subtalar,tibiotalar , tibiocalcaneal, tibiotalocalcaneal joint

arthrodesis with all involved screws/blades.with distal targeting device

1113

Expert Hindfoot arthrodesis nail of varying diameters and lenghts 10mm to

11.5mm/12mm x160mm/200/250mm

1114 End cap for blade and screws

1115 Locking screw 6 mm

1116 Locking screw 5 mm ,20mm to 50mm

1117 Locking screw 5mm 55mm to 110mm

1118 Special screws if any

1119

Expert Femoral Nail ( preferable to have distal targetic device to reduce

radiation exposure during insertion of distal interlocking screws )

1120

Expert Antegrade femoral nail cannulated 9 mm/10mm to11.5mm/ 12 mm x 300

to 460 mm

1121 End cap

1122 Hip screw 6.4 mm 60 to 130 mm

1123 Locking screw 5 mm

1124

Distal femur Nail ( preferable to have distal targetic device to reduce radiation

exposure during insertion of distal interlocking screws )

1125 Cannulated nail 10,11.5 mm x200mm to 380 mm

1126 End cap

1127 Locking screw 6.00 mm

1128 Locking screw 5.00 mm

1129 Adoloscent Femur Nail system

1130 8.5mm Femur nail various size and right and left nail

1131 Locking screws 4.5mm 20mm to 50mm

1132 Locking screws 4.5mm 55 mm to 110mm

1133 Spatial frame for limb correction

1134 slotted washer having inner diameter 4mm and outer diameter 14mm

1135 fixation bolt washer having 2.0mm diameter

1136 fixation bolt washer having 4.0mm diameter

1137 connection bolts having 10.0mm length

1138 connection bolts having 16.0mm length

1139 connection bolts having 20.0mm length

1140 nut having 10mm hex head, 6mm Inner Diameter and 5mm thick

1141 4 point distraction and compression counter having 10mm square head

1142 rancho centering sleeve for 6mm half pin

1143 rancho cubes with 3 holes

1144 rancho cubes with 4 holes

1145 rancho cubes with 5 holes

1146 conical washer couple

1147 russian wire fixation bolt having an undercut for wire placement

1148 slotted long wire fixation bolt

1149 centering sleeve for 6 mm half pin to be used with angled pin connectors

1150 rancho cubes with post having one hole

1151 rancho cubes with post having two hole

1152 Angle pin connector having length of 35mm

1153 angle pin connector having length of 85mm

1154 extended connector short having length of 30mm

1155 extended connector long having length of 50mm

1156 wire combination fixation bolt having both centering hole and eccentric option

1157 sponges for wire

1158 orange colored protective half pin caps for 6mm halfpin

1159 orange colored disc clips for half pins

1160 disc clips for wires

1161 Identity band for fast fixation struts with numbers on them

1162 bayonet point wires having diameter of 1.8mm and length of 370mm

1163 wire with stopper having diameter of 1.8mm and length of 400mm

1164 threaded sockets having length of 20mm

1165 threaded sockets having length of 40mm

1166 threaded sockets having length of 30mm

1167 threaded sockets having length of 60mm

1168 male post with 2 holes

1169 male post with 3 holes

1170 male post with 4 holes

1171 standard male hinges

1172 low profile male hinges

1173 standard female hinges

1174 low profile female hinges

1175 short connection plate having 3 holes with length of 45mm

1176 short connection plate having 2 holes with length of 35mm

1177 threaded rod having length of 80mm

1178 threaded rod having length of 100mm

1179 threaded rod having length of 120mm

1180 threaded rod having length of 150mm

1181 threaded rod having length of 200mm

1182 threaded rod having length of 250mm

1183 low profile 90 degree hinge

1184 high profile 90 degree hinge

1185 Rings and Foot Plates

1186

Anodized Aluminium Full Rings having diameter of 155mm with 7 holes master

tab

1187

Anodized Aluminium Full Rings having diameter of 180mm with 7 holes master

tab

1188

Anodized Aluminium Full Rings having diameter of 205mm with 7 holes master

tab

1189 Anodized Aluminium Half Rings having diameter of 155mm

1190 Anodized Aluminium Half Rings having diameter of 180mm

1191 Anodized Aluminium Half Rings having diameter of 205mm

1192

Anodized Aluminium Two-Third Rings having diameter of 155mm with 7 holes

master tab

1193

Anodized Aluminium Two-Third Rings having diameter of 180mm with 7 holes

master tab

1194

Anodized Aluminium Two-Third Rings having diameter of 205mm with 7 holes

master tab

1195

Anodized Aluminium Full Rings having diameter of 130mm with 7 holes master

tab

1196 Anodized Aluminium Half Rings having diameter of 130mm

1197

Anodized Aluminium Two-Third Rings having diameter of 130mm with 7 holes

master tab

1198 Anodized Aluminium Long Foot Rings having diameter of 155mm

1199 Anodized Aluminium Long Foot Rings having diametter of 180mm

1200 Anodized Aluminium Short Foot Rings having diametter of 155mm

1201 Anodized Aluminium Short Foot Rings having diametter of 180mm

1202 Anodized Aluminium SF U Plate having inner diameter of 130mm

1203 Anodized Aluminium SF U Plate having inner diameter of 155mm

1204 Anodized Aluminium SF U Plate having inner diameter of 180mm

1205 Short Fast FX Strut stretching from 116mm to 152mm

1206 Medium Fast FX Strut stretching from 143mm to 205mm

1207 Long Fast FX Strut stretching from 195mm to 311mm

1208 Standard Extra Extra Short Strut stretching from 59mm to 76mm

1209 Extra Short Fast FX strut stretching from 91mm to 121mm

1210 half pin having diameter of 4.5mm with length of 150mm and 20mm HA coated

1211 half pin having diameter of 4.5mm with length of 150mm and 30mm HA coated

1212 half pin having diameter of 4.5mm with length of 150mm and 40mm HA coated

1213 half pin having diameter of 6.0mm with length of 150mm and 20mm HA coated

1214 half pin having diameter of 6.0mm with length of 200mm and 25mm HA coated

1215 half pin having diameter of 6.0mm with length of 200mm and 30mm HA coated

1216 half pin having diameter of 6.0mm with length of 200mm and 35mm HA coated

1217 half pin having diameter of 6.0mm with length of 200mm and 40mm HA coated

1218 half pin having diameter of 6.0mm with length of 200mm and 45mm HA coated

1219 half pin having diameter of 6.0mm with length of 200mm and 50mm HA coated

1220 half pin having diameter of 6.0mm with length of 200mm and 55mm HA coated

1221 half pin having diameter of 6.0mm with length of 200mm and 60mm HA coated

1222 half pin having diameter of 6.0mm with length of 200mm and 65mm HA coated

1223 half pin having diameter of 6.0mm with length of 200mm and 70mm HA coated

1224 fixation bolt for 6mm half pin

1225

bar to bar connecting freedom clamp made up of part aluminium and titanium

with stainless steel tightening bolts

1226

bar to pin connecting freedom clamp made up of part aluminium and titanium

with stainless steel tightening bolts

1227 The system shoul have thirty degree angled post

1228 bar with diameter 10.5mm and length measuring upto 100mm

1229 bar with diameter 10.5mm and length measuring upto 150mm

1230 bar with diameter 10.5mm and length measuring upto 200mm

1231 bar with diameter 10.5mm and length measuring upto 250mm

1232 bar with diameter 10.5mm and length measuring upto 300mm

1233 bar with diameter 10.5mm and length measuring upto 350mm

1234 bar with diameter 10.5mm and length measuring upto 400mm

1235

titanium nitride short half pins with thread diameter 5mm, shank diameter

5mm, thread length 30mm and shank length 110mm

1236

titanium nitride long half pins with thread diameter 5mm, shank diameter 5mm,

thread length 30mm and shank length 160mm

1237

titanium nitride short half pins with thread diameter 5mm, shank diameter

5mm, thread length 35mm and shank length 110mm

1238

titanium nitride long half pins with thread diameter 5mm, shank diameter 5mm,

thread length 35mm and shank length 160mm

1239

titanium nitride short half pins with thread diameter 5mm, shank diameter

5mm, thread length 40mm and shank length 110mm

1240

titanium nitride long half pins with thread diameter 5mm, shank diameter 5mm,

thread length 40mm and shank length 160mm

1241

titanium nitride short half pins with thread diameter 5mm, shank diameter

5mm, thread length 45mm and shank length 110mm

1242

titanium nitride long half pins with thread diameter 5mm, shank diameter 5mm,

thread length 45mm and shank length 160mm

I specification for

interlocking nail

For Interlocking Nail: ( especially in special implants category) Instrumentation

should be simple so that operatiion time is less ( beneficial for the patient).

Guide wire – ball tipped designed in such a way that it can be removed even after

nail is inserted. Should supply all the necessary instruments necessary for the

conduction of the surgery.

US FDA approval

Preferable to have to have distal targeting device for c arm less insertion of distal

locking screws ( it will reduce the radiation exposure to the patient )

II specification for

periarticular and

periprosthetic

fracture implants

For Special implants to be used In fractures in periarticular region and in

osteoporotic bones ( All are MRI compatible implants and USFDA

APPROVAL)

Anatomically contoured in such a way that it fits best the bone.

It should not irritate the soft tissue

It should facilitate easy closure of the skin after surgery

US FDA approval

Preferred if the Locking compression screw - inserted into the plate is

cannulated.