e issue page 1 of 5 patch cords single...
TRANSCRIPT
DATASHEET DB4100-E Issue C Page 1 of 5
Description
The patch cords can be delivered as:
Pigtail, 0.9 mm Secondary coated fibre* (0.9 mm) with connector in one end.
Patch cord, 0.9 mm Secondary coated fibre* (0.9 mm) with connector in both ends. One patch cord cut in half makes two
pigtails.
Patch cord, 2.0 mm 1-fiber cable (2.0 mm) with connector in both ends.
Duplex patch cord, 2.0 mm 2-fiber cable (2.0 mm, figure 8) with two connectors in each end. The SC and LC connectors are
attached with clips. *Secondary coated fibre is tight buffered fibre, providing around 100 mm strip length.
Specifications Fibre type: ITU-T G.657.A1 compatible with G.652.D
OS-2 EN 50173-1, yellow
Cable: Flame retardant, Zero halogen IEC 60332-3-24, 60332-1-2, 60754-1
Operating wavelength: 1260 - 1625 nm
Operating temperature: -40 °C to 60 °C
Additional loss with fibre bend: <0,05 dB v/1550 nm 10 turns with radius 15 mm
<0,5 dB v/1550 nm 1 turn with radius 10 mm
Patch cords for use in all parts of the network, through the full
CWDM and DWDM ranges.
Can be delivered with most connector types.
PC or APC polish.
Using bend insensitive fibre (G.657.A1).
Delivered in customer specified lengths.
Patch cords - single mode
DATASHEET DB4100-E Issue C Page 2 of 5
Specifications cont.
1) There are two types of FC/APC connectors:
FC/APCR (Reduced) with a key width of 2,0 mm (1,97 - 2,02) - often named 2,04 mm and FC/APCN (NTT) with a key width of 2,14 mm (2,09 - 2,14) these two types must not be mixed.
2) The connector features a spring-loaded shutter which closes automatically when the connector is disengaged.
Connector type (single mode)
Standard Ferrule type Polishing technic Insertion loss
(1310/1550 nm)
Return loss Class
according to
IEC 61755-1
Max Typ Max Typ
SC/PC IEC 61 754-4 Zirconia, 2.5 mm PC (0˚ convex)
Colour code blue
0.5 dB 0.15 dB -45 dB -50 dB C2
SC/APC IEC 61 754-4 Zirconia, 2.5 mm APC (8˚ convex)
Colour code green
0.5 dB 0.15 dB -60 dB -65 dB C1
LC/PC IEC 61 754-20 Zirconia, 1.25 mm PC (0˚ convex)
Colour code blue
0.5 dB 0.15 dB -45 dB -50 dB C2
LC/APC IEC 61 754-20 Zirconia, 1.25 mm APC (8˚ convex)
Colour code green
0.5 dB 0.15 dB -60 dB -65 dB C1
FC/PC IEC 61 754-13 Zirconia, 2.5 mm PC (0˚ convex)
Colour code blue
0.5 dB 0.15 dB -45 dB -50 dB C2
FC/APC 1) IEC 61 754-13 Zirconia, 2.5 mm APC (8˚ convex)
Colour code green
0.5 dB 0.15 dB -60 dB -65 dB C1
MU/PC IEC 61 754-6 Zirconia, 1.25 mm PC (0˚ convex)
Colour code blue
0.5 dB 0.15 dB -45 dB -50 dB C2
E2000/
PC 2)
IEC 61 754-15 Zirconia, 2.5 mm PC (0˚ convex)
Colour code blue
0.5 dB 0.15 dB -45 dB -50 dB C2
E2000/
APC 2)
IEC 61 754-15 Zirconia, 2.5 mm APC (8˚ convex)
Colour code green
0.5 dB 0.15 dB -60 dB -65 dB C1
ST/PC IEC 61 754-2 Zirconia, 2.5 mm PC (0˚ convex) 0.65 dB 0.25 dB -45 dB -50 dB D2
DATASHEET DB4100-E Issue C Page 3 of 5
Article numbers 8-3XYY-zzz
Examples:
SC/PC:
8-3870-015 Pigtail, SC/PC, 9/OS2/900, 1.5 m, yellow 0.9 mm
8-3877-zzz Patch cord, SC/PC-SC/PC, 9/OS2/900, z m, yellow 0.9 mm
8-3A77-zzz Patch cord, SC/PC-SC/PC, 9/OS2/2000, z m, yellow 2.0 mm
8-3B77-zzz Duplex Patch cord, SC/PC-SC/PC, 9/OS2/2000, z m, yellow 2.0 mm
LC/APC:
8-38K0‐015 Pigtail, LC/APC, 9/OS2/900, 1.5 m, yellow 0.9 mm
8-38KK‐zzz Patch cord, LC/APC‐LC/APC, 9/OS2/900, z m, yellow 0.9 mm
8-3AKK‐zzz Patch cord, LC/APC‐LC/APC, 9/OS2/2000, z m, yellow 2.0 mm
8-3BKK‐zzz Duplex Patch cord, LC/APC‐LC/APC, 9/OS2/2000, z m, yellow 2.0 mm
SC/PC - LC/PC:
8-387L-zzz Patch cord, SC/PC-LC/PC, 9/OS2/900, z m, yellow 0.9 mm
8-3A7L-zzz Patch cord, SC/PC-LC/PC, 9/OS2/2000, z m, yellow 2.0 mm
8-3B7L-zzz Duplex Patch cord, LC/PC-SC/PC, 9/OS2/2000, z m, yellow 2.0 mm
FC/APCR:
8-38DD-zzz Patch cord, FC/APCR-FC/APCR, 9/OS2/900, z m, yellow 0.9 mm
8-3ADD-zzz Patch cord, FC/APCR-FC/APCR, 9/OS2/2000, z m, yellow 2.0 mm
8-3BDD-zzz Duplex Patch cord, FC/APCR-FC/APCR, 9/OS2/2000, z m, yellow 2.0 mm
MU/PC:
8-38M0-015 Pigtail, MU/PC, 9/OS2/900, 1.5 m, yellow 0.9 mm
8-38MM-zzz Patch cord, MU/PC-MU/PC, 9/OS2/900, z m, yellow 0.9 mm
E2000/APC:
8-3AGG-zzz Patch cord, E2000/APC-E2000/APC, 9/OS2/2000, z m, yellow 2.0 mm
8-3BGG-zzz Duplex Patch cord, E2000/APC-E2000/APC, 9/OS2/2000, z m, yellow 2.0 mm
X = Cable type:
8 = Pigtail/patch cord 0.9 mm
A = Patch cord 2.0 mm
B = Duplex patch cord 2.0 mm
Y = Connector type:
0 = No connector 5 = FC/PC L = LC/PC F = E2000/PC
7 = SC/PC D = FC/APCR K = LC/APC G = E2000/APC
E = SC/APC H = FC/APCN 1 = ST/PC
M = MU/PC
zzz = length code: 010 = 1.0 m, 015 = 1.5 m, 100 = 10 m etc.
DATASHEET DB4100-E Issue C Page 4 of 5
Interferometric geometrical control
The geometry of the connectors (the ferrule) are tested according to IEC 61755-3-1 (PC) and
IEC 61755-3-2 (APC). The tests are performed at type approval and by sample tests, using an
interferometer. Geometry deviations from standard can cause bit errors. For critical systems,
we are now capable of delivering entire orders or part of orders with interferometric
certificate. Please contact us for details.
Gallery
Patch cord, ST/PC-ST/PC, 9/OS2/900
Patch cord, FC/APC-FC/APC, 9/OS2/2000
Pigtail, SC/PC, 9/OS2/900 Pigtail, LC/APC, 9/OS2/900 Pigtail, FC/PC, 9/OS2/900
Patch cord, E2000/APC-E2000/APC, 9/OS2/900 Patch cord, MU/PC-MU/PC, 9/OS2/900
Patch cord, SC/APC-SC/APC, 9/OS2/2000 Patch cord, LC/PC-LC/PC, 9/OS2/2000
DATASHEET DB4100-E Issue C Page 5 of 5
Gallery cont.
Duplex Patch cord, LC/APC-LC/APC, 9/OS2/2000
Patch cord, ST/PC-ST/PC, 9/OS2/2000 Patch cord, LC/PC-LC/PC, 9/OS2/2000 Patch cord, MU/PC-MU/PC, 9/OS2/2000
Duplex Patch cord, ST/PC-ST/PC, 9/OS2/2000 Duplex Patch cord, MU/PC-MU/PC, 9/OS2/2000
Duplex Patch cord, FC/PC-FC/PC, 9/OS2/2000 Duplex Patch cord, E2000/APC-E2000/APC, 9/OS2/2000
DATASHEET DB4101-E Issue E Page 1 of 3
Description
The patch cords can be delivered as:
Pigtail, 0.9 mm Secondary coated fibre* (0.9 mm) with connector in one end.
Patch cord, 0.9 mm Secondary coated fibre* (0.9 mm) with connector in both ends. One patch cord cut in half makes two
pigtails.
Patch cord, 2.0 mm 1-fiber cable (2.0 mm) with connector in both ends.
Duplex Patch cord, 2.0 mm 2-fiber cable (2.0 mm, figure 8) with two connectors in each end. The SC and LC connectors are
attached with clips. *Secondary coated fibre is tight buffered fibre, providing around 100 mm strip length.
Specifications Fibre type: OM-1 (62.5/125) EN 50173-1, grey
OM-2 (50/125) EN 50173-1, orange
OM-3 (50/125) EN 50173-1, turquoise
OM-4 (50/125) EN 50173-1, turquoise
Cable: Flame retardant, Zero halogen IEC 60332-3-24, 60332-1-2, 60754-1
Operating temperature: -40 °C to 60 °C
Multi mode patch cords for use in local area network in the
850/1300 nm wavelength ranges.
Can be delivered with most connector types.
Delivered in customer specified lengths.
Patch cords - multi mode
DATASHEET DB4101-E Issue E Page 2 of 3
Specifications cont.
The connector colours may deviate from the pictures.
Connector type (Multi mode)
Standard Ferrule type Polishing technic Insertion loss
(850/1300 nm)
Max Typ
SC IEC 61 754-4 Zirconia, 2.5 mm PC (0˚ convex)
Colour code beige
0.5 dB 0.2 dB
LC IEC 61 754-20 Zirconia, 1.25 mm PC (0˚ convex)
Colour code beige
0.5 dB 0.2 dB
FC IEC 61 754-13 Zirconia, 2.5 mm PC (0˚ convex) 0.5 dB 0.2 dB
ST IEC 61 754-2 Zirconia, 2.5 mm PC (0˚ convex) 0.5 dB 0.2 dB
DATASHEET DB4101-E Issue E Page 3 of 3
Article numbers 8-WXYY-zzz
Examples:
OM-4 (50/125) SC:
8-6870-015 Pigtail, SC, 50/OM4/900, 1,5 m, turquoise 0.9 mm
8-6877-zzz Patch cord, SC-SC, 50/OM4/900, z m, turquoise 0.9 mm
8-6A77-zzz Patch cord, SC-SC, 50/OM4/2000, z m, turquoise 2.0 mm
8-6B77-zzz Duplex Patch cord, SC-SC, 50/OM4/2000, z m, turquoise 2.0 mm
OM-3 (50/125) SC:
8-5870-015 Pigtail, SC, 50/OM3/900, 1,5 m, turquoise 0.9 mm
8-5877-zzz Patch cord, SC-SC, 50/OM3/900, z m, turquoise 0.9 mm
8-5A77-zzz Patch cord, SC-SC, 50/OM3/2000, z m, turquoise 2.0 mm
8-5B77-zzz Duplex Patch cord, SC-SC, 50/OM3/2000, z m, turquoise 2.0 mm
OM-2 (50/125) LC:
8-48L0-015 Pigtail, LC, 50/125/900, 1,5 m, orange 0.9 mm
8-48LL-zzz Patch cord, LC-LC, 50/125/900, z m, orange 0.9 mm
8-4ALL-zzz Patch cord, LC-LC, 50/125/2000, z m, orange 2.0 mm
8-4BLL-zzz Duplex Patch cord, LC-LC, 50/125/2000, z m, orange 2.0 mm
OM-1 (62.5/125) ST:
8-7810-015 Pigtail, ST, 62.5/125/900, 1,5 m, grey 0.9 mm
8-7811-zzz Patch cord, ST-ST, 62.5/125/900, z m, grey 0.9 mm
8-7A11-zzz Patch cord, ST-ST, 62.5/125/2000, z m, grey 2.0 mm
8-7B11-zzz Duplex Patch cord, ST-ST, 62.5/125/2000, z m, grey 2.0 mm
OM-3 (50/125) SC-LC:
8-587L-zzz Patch cord, SC-LC, 50/OM3/900, z m, turquoise 0.9 mm
8-5A7L-zzz Patch cord, SC-LC, 50/OM3/2000, z m, turquoise 2.0 mm
8-5B7L-zzz Duplex Patch cord, SC-LC, 50/OM3/2000, z m, turquoise 2.0 mm
X = Cable type:
8 = Pigtail/patch cord 0.9 mm
A = Patch cord 2.0 mm
B = Duplex patch cord 2.0 mm
Y = Connector type:
0 = No connector 5 = FC
7 = SC 1 = ST
L = LC
zzz = length code: 010 = 1.0 m, 015 = 1.5 m, 100 = 10 m etc.
W=Fibre type:
4 = Multi mode, OM-2 (50/125)
5 = Multi mode, OM-3 (50/125)
6 = Multi mode, OM-4 (50/125)
7 = Multi mode, OM-1 (62.5/125)
DATASHEET DB4103-E Issue A Page 1 of 2
Description
The patch cords can be delivered as:
Patch cord, 0.9 mm Secondary coated fibre* (0.9 mm) with connector in both ends. One patch cord cut in half makes two
pigtails.
Patch cord, 2.0 mm 1-fiber cable (2.0 mm) with connector in both ends.
Duplex patch cord, 2.0 mm 2-fiber cable (2.0 mm, figure 8) with two connectors in each end.
*Secondary coated fibre is tight buffered fibre, providing around 100 mm strip length.
Specifications Standard: IEC 61 754-3
Ferrule type: Zirconia 2.5 mm
Cable: Flame retardant, Zero halogen IEC 60332-3-24, 60332-1-2, 60754-1
Operating temperature: -40 °C to 60 °C
Single mode:
Polishing technic: PC (0˚ convex) Colour code blue
APC (8˚ convex) Colour code green
Fibre type: ITU-T G.657.A1 compatible with G.652.D
OS-2 EN 50173-1, yellow
Insertion loss: < 0.5 dB at 1310/1550 nm < 0.15 dB typical
Return loss: < -45 dB at 1310/1550 nm for PC < -50 dB typical
< -60 dB at 1310/1550 nm for APC < -65 dB typical
Classification: Class C2 (PC), class C1 (APC) IEC 61755-1
Operating wavelength: 1260 - 1625 nm
Additional loss with fibre bend: <0,05 dB v/1550 nm 10 turns with radius 15 mm
<0,5 dB v/1550 nm 1 turn with radius 10 mm
Multi mode:
Polishing technic: PC (0˚ convex)
Fibre type: OM-1 (62.5/125) EN 50173-1, grey
OM-2 (50/125) EN 50173-1, orange
Insertion loss: < 0.5 dB at 850/1300 nm < 0.2 dB typical
Single or multi mode.
Single mode connectors are delivered with PC or APC polish.
Single mode patch cords are delivered with bend insensitive fibre
(G.657.A1).
Delivered in customer specified lengths.
Patch cords, DIN
DATASHEET DB4103-E Issue A Page 2 of 2
Article numbers Single mode:
8-38BB-xxx Patch cord, DIN/PC-DIN/PC, 9/125/900, x m, yellow 0.9 mm
8-3ABB-xxx Patch cord, DIN/PC-DIN/PC, 9/125/2000, x m, yellow 2.0 mm
8-3BBB-xxx Duplex Patch cord, DIN/PC-DIN/PC, 9/125/2000, x m, yellow 2.0 mm
8-38CC-xxx Patch cord, DIN/APC-DIN/APC, 9/125/900, x m, yellow 0.9 mm
8-3ACC-xxx Patch cord, DIN/APC-DIN/APC, 9/125/2000, x m, yellow 2.0 mm
8-3BCC-xxx Duplex Patch cord, DIN/APC-DIN/APC, 9/125/2000, x m, yellow 2.0 mm
Multi mode:
OM-1 (62.5/125):
8-78BB-xxx Patch cord, DIN-DIN, 62.5/125/900, x m, grey 0.9 mm
8-7ABB-xxx Patch cord, DIN-DIN, 62.5/125/2000, x m, grey 2.0 mm
8-7BBB-xxx Duplex Patch cord, DIN-DIN, 62.5/125/2000, x m, grey 2.0 mm
OM-2 (50/125):
8-48BB-xxx Patch cord, DIN-DIN, 50/125/900, x m, orange 0.9 mm
8-4ABB-xxx Patch cord, DIN-DIN, 50/125/2000, x m, orange 2.0 mm
8-4BBB-xxx Duplex Patch cord, DIN-DIN, 50/125/1800, x m, orange 2.0 mm
xxx = length: 010 = 1.0 m, 015 = 1.5 m, 100 = 10 m etc.
Gallery
Patch cord, DIN/PC-DIN/PC, 9/125/900 Patch cord, DIN/APC-DIN/APC, 9/125/2000 Duplex patch cord, DIN/PC-DIN/PC, 9/125/2000
Patch cord, DIN-DIN, 62.5/125/900 Patch cord, DIN-DIN, 50/125/2000 Duplex patch cord, DIN-DIN, 50/125/2000
DATASHEET DB4143-E Issue B Page 1 of 2
Description
Single mode attenuated patch cord with connector in both ends. Diameter is 2.0 mm and standard length is 1 m.
Specifications Attenuation accuracy*: +/- 13 % For values of 1 - 6 dB nominal
+/- 10 % For values of 7 - 20 dB nominal
Operating wavelength: 1260 - 1620 nm
Operating temperature: -25 °C to 60 °C
* Insertion loss from the connectors will be added
Connectors:
Polishing technic: PC (0˚ convex) Colour code blue
APC (8˚ convex) Colour code green
Insertion loss: < 0.5 dB < 0.15 dB typical
Article numbers ATN-77-xx-010 Attenuated patch cord, SC/PC - SC/PC, xx dB, 1 m
ATN-EE-xx-010 Attenuated patch cord, SC/APC - SC/APC, xx dB, 1 m
ATN-LL-xx-010 Attenuated patch cord, LC/PC - LC/PC, xx dB, 1 m
ATN-KK-xx-010 Attenuated patch cord, LC/APC - LC/APC, xx dB, 1 m
ATN-55-xx-010 Attenuated patch cord, FC/PC - FC/PC, xx dB, 1 m
ATN-DD-xx-010 Attenuated patch cord, FC/APCR - FC/APCR, xx dB, 1 m
ATN-HH-xx-010 Attenuated patch cord, FC/APCN - FC/APCN, xx dB, 1 m
ATN-MM-xx-010 Attenuated patch cord, MU/PC - MU/PC, xx dB, 1 m
ATN-FF-xx-010 Attenuated patch cord, E2000/PC - E2000/PC, xx dB, 1 m
ATN-GG-xx-010 Attenuated patch cord, E2000/APC - E2000/APC, xx dB, 1 m
xx = attenuation: 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 15, 20 dB May on request be delivered as hybrids patch cords (different connectors in each end). Other lengths may also be delivered.
Single mode attenuated patch cord (1 m).
May be delivered with most connector types, PC- or APC polished.
May be delivered with attenuation from 1 to 20 dB.
Attenuated patch cords
DATASHEET DB4143-E Issue B Page 2 of 2
Gallery
Attenuated patch cord, SC/PC Attenuated patch cord, LC/APC Attenuated patch cord, SC/APC
Attenuated patch cord, MU/PC Attenuated patch cord, LC/PC—MU/PC Attenuated patch cord, LC/PC
DATA SHEET DB4121-E Issue C Page 1 of 1
Ordering information optical patch cords
8 - - -
Fibre type Code
9/125 μm (OS-2, G.652.D) 1
9/125 μm (OS-2, G.657.A2) 2
9/125 μm (OS-2, G.657.A1) 3
50/125 μm (OM-2) 4
50/125 μm (OM-3) 5
50/125 μm (OM-4) 6
62.5/125 μm (OM-1) 7
Connector type Code
No connector 0
ST (BFOC) 1
SMA 905 2
PBJR Plug 3
PBJR panel connector 4
FC 5
PBSR Plug 6
SC 7
PBSR panel connector 8
MT-RJ 9
DIN B
DIN/APC C
FC/APC (R-type) D
SC/APC E
E-2000 F
E-2000/APC G
FC/APC (N-type) H
LC/APC K
LC L
MU M
Additions
1 = angle, 1. connector
2 = angle, 2. connector
3 = angle, both ends
4 = MT-RJ with pins
Other = internal info
Cable type Code
1-fibre, 2.9 mm OS2=yellow, OM1=grey, OM2=orange, OM3=turquoise, OM4=turquoise (only on request) 2
2-fibre, 2.9 mm OM1, red (only on request) 3
2-fibre, 2.9 mm OS2=yellow, OM1=grey, OM2=orange, OM3=turquoise, OM4=turquoise (only on request) 5
1-fibre, 0.9 mm, tight buffer (100mm strip length), OS2=yellow, OM1=grey, OM2=orange, OM3=turquoise, OM4=turquoise
8
1-fibre, 2.0 mm, OS2=yellow, OM1=grey, OM2=orange, OM3=turquoise, OM4=turquoise A
2-fibre, 2.0 mm, OS2=yellow, OM1=grey, OM2=orange, OM3=turquoise, OM4=turquoise B
2-fibre, 2.0 mm, OM1, red (only on request) D
2-fibre, 2.0 mm, OM1, green (only on request) E
2-fibre, 2.0 mm, OS2, blue F
1-fibre, 2.0 mm, OS2, red (only on request) G
2-fibre, 2.0 mm, OS2, red (only on request) H
1-fibre, 2.8 mm, G.657.A2, white P
1-fibre, 4.5 mm, G.657.A2, white R
2-fibre, 4.5 mm, G.657.A2, white S
Length information
015 = 1.5 m
050 = 5.0 m
100 = 10.0 m