www.acoemgroup.comBrand of ACOEM

DYNATEST is dedicated to the METRAVIB DMA instruments range to perform test control, data acquisition and data post-processing.

DYNATEST executes the test automatically according to the programmed conditions, while offering a range of follow up and checking options for the analysis conditions applied during the test.DYNATEST allows the user to edit the tests data under various presentations; the data post-treatment is made easy by the direct exportation of the ASCII files and compatible format with MS Pack office.

Dedicated to METRAVIB productsDMA25 l DMA50DMA+100 l DMA+150 l DMA+450DMA+300 l DMA+1000 l DMA+2000VHF104

Main usesl DMA testsl TMA testsl DMA/TMA simultaneous testsl Creep and stress relaxation testsl Tension testsl Compression testsl Dynamic master curves calculationl Creep master curves calculation

Main benefitsl Highly flexible test definition l Advanced control algorithmsl Auto-control mode l Auto-tension model Test conditions full traceabilityl Customized data presentationsl Advanced test reportl Curve superposition facilitiesl Easy data post processing

DMA and fatigue testing capabilities in a single machine!DYNATEST - DMA testing software

01dB METRAVIB SAS - 200 Chemin des Ormeaux - 69578 LIMONEST - FRANCE - Tel : +33 (0)4 72 52 48 00 www.acoemgroup.com

The

pre

sent

car

acte

ristic

s ar

e su

bjec

t to

cha

nge

with

out

notic

e. O

ctob

er 2

014 B

Data availablel Stiffness K, K’, K’’l Young’s modulus E, E’, E’’ / shear modulus G, G’, G’’l Dynamic viscosity n, n’, n’’l Loss angle d, tan dl Compliance J, J’, J‘’l Supplied energy Wf / loss energy Wd l Master curvesl Additional measurement channels

Main parametersl Frequency / time / temperaturel Static and dynamic displacement / strainl Static and dynamic force / stress

Operating modesl Test definition possible from template filesl Automatic tests sequencing

Dynamic testsl Tests with imposed displacement/strain/force/stressl Tests at stabilized temperaturel Frequency sweep with imposed strain (WLF tests)l Sweep in displacement/strain/force (up/up and down)l Single frequency/multifrequency tests on temperature rampsl Tests with constant dynamic/static ratiol Single frequency/multifrequency kinetic tests (curing)

Transient tests l Creep/stress relaxation tests (TTS tests)

Thermomechanical tests l Tension testsl Compression testsl Dilatometry testsl Penetrometry tests

Controll Automatic test control and data collectionl Real-time display of data signals (force / displacement)l Adjustment of dynamic and static control algorithmsl Identification of data points out of control tolerancel Automatic adjustment of excitation control (Auto-control mode)l Advanced temperature stage controll Advanced temperature calibration (ATC)

Data editionl Customized data presentation storagel Multiple data presentationsl Characteristic points markingl Easy data superpositionl Customised test reportl Advanced test report (MS office exportation)

External data exploitationl Automatic ASCII file generationl Customization of data exportation l Data processing with MS Pack Office

Other functionsl Access level depending on operator profile l Continuous data storage while testingl Full control of real test conditionsl Compatible Windows 7 operating systeml Online help

Optionsl TTS: computation of long-term creep functionl Operator alert: automatic phone call, emails, text messages generation to alert the operator at the end of testl Maintenance software module