Integrated Tote MixerSOLUTIONS FOR MIXING IN PLASTIC TOTES

W W W. D Y N A M I X I N C . C O Minfo@dynamixinc.com 604 244 3771

EMAIL MAIN

01. Features + Benefits

02. Technical Specifications

03. Quality Control + Portability

04. Solution Assurance

05. Product + Ordering Information

MIXING EXPERIENCE WITH SOLUTIONSMIXING EXPERIENCE WITH SOLUTIONS

ITM Technical Specs

ITM for Plastic Totes ITM for Stainless Steel Totes

D

L

A

d

D

L

A

d

THREADED MOUNT

COLLAPSIBLE IMPELLER

LID MOUNT

FIXED IMPELLER

Dynamix has a unique focus on Tote mixing. For this we offer our ITM line for Plastic Totes as well as Stainless Steel Totes.

Typical Configurations

If there is a mixer configuration you would prefer and do not see, please contact Dynamix.

* Also available with Electric Motors

SPEC

IFIC

ATIO

NS Motor Type Electric Air

Model ITM-7305G ITM-7305J ITM-7305K ITM-7230G ITM-7605J ITM-7605K ITM-7610K

Horsepower 0.50 0.50 1 0.5 0.5 0.5 1

Speed (rpm) 350 175 88 350 175 88 88

DIM

ENSI

ON

S Drive Unit Length A 17.5” 17.5” 17.5” 17.5” 17.5” 17.5” 17.5”

Shaft Diameter d 3/4” 3/4” 1” 3/4” 3/4” 1” 1”

Shaft Length** L 34” 34” 34” 34” 34” 34” 34”

Impeller Diameter* Single 10” 13” 13” 15” - 17” 17” - 21”

Dual 17” - 19” 17”-21”

*Shaft Length will be dependent on tank geometry*Impleller Diameter should be selected to suite the drive and application

*Dual Impeller configurations also available*Impeller types are selected according to application

ITM Series

Get a Quote Now!

Quality Mixing

Problem

The typical mixer sold for totes is just a standard mixer adapted to the tote via a bridge, clamp or hoist. These adaptations result in contamination via exposure and cross contamination;

1 EXPOSURE CONTAMINATION Common mixing apparatus adapts the mixer to the tote via an additional apparatus: Lift, Bridge, Hoist, etc. All of these methods leave the tote mouth explosed to the environment.

2 CROSS CONTAMINATION Traditional mixers are a single unit and cannot be separated in the same manner as an ITM. Therefore, they are transferred from one tank/application to the next. This method results in cross contamination. In most cases labor intensive cleaning is employed, but this still does not assure the cleanliness of the mixer shaft.

Solution

The Integrated Tote Mixer “ITM” is unique because it is designed to become part of the tote tank.

1 The ITM Mount allows the Agitator Segment to be committed to and seal your tote. This mounting eliminates any exposure to the environment during mixing, storage and application. Once an ITM encloses your product and tote it does not have to be exposed to the environment until dispensed.

The ITM Solution

Portability

Assembly and Installation

One of the most valuable benefits of the ITM is its portability. Because the ITM is highly portable you can now apply your new quality control tool (The ITM) wherever you need.

1 The mixer consists of 2 detachable segments ( A. Drive Segment B. Agitator Segment) which can be installed and removed by one person.

2 The Agitator Segment can be inserted through the 6 inch*opening and mounted fully sealing the tote.

3 The drive segment dynamically couples to the agitator segment with a twist and lock.

4 Once mounted and in operation, the impellers expand into its full diameter (up to 21”).

5 Your product can now be brought back into specification without the concern of contamination.

* Available for openings of various diameters

2 The unique ITM Dynamic Coupling allows a common Drive Segment to be applied to several products/totes (red, green, blue) without removing cleaning and inserting an agitator each time. There is no need to clean the mixer in between applications. As per above this ensures the product is not exposed to the environment, but more importantly it is not the source of cross contamination by the agitator. This can translate into cost savings in the overall mixer investment, as well as your cost of cleaning.

By assuring your mixing quality through our Solution Assurance, then enclosing this technology from the above contamination you will pay for your ITM Mixers and reduce quality issues such as returned product, dump back and improve customer relationships.

2 31 544

Solution Assurance

Your Solution Assurance

While some other mixer companies try to provide mixers

on a “one size fits all” approach, we believe it is our

responsibility to optimize your mixer according to your

process needs.

Although we stock several key mixer lines we are not an

“off the shelf” mixer company, we are a Solutions oriented

Company.

Our exacting clients credit us with aiding ancillary issues

such as energy, contamination, process cost and much

more. Our engineering staff is prepared to work with you.

We have Chemical and Mechanical Engineering experience

which will understand your product requirements in order

to properly configure a mixer for you. These solutions

will consider the chemical properties of your application

(Viscosity, Specific Gravity, etc.), Tank (Type and

Dimensions), Process (Cost and Time) and Environment in

order to provide a solution for you.

The outcome is our Solution Assurance. Based on your

description of your needs, this Assurance will indicate the

time required to bring your product back to uniformity.

Understanding Customer’s Application & Process Needs

Dynamix Engineering & Design Process

Dynamix Solution Assurance

GUARANTEED RESULTS Our unique Solution Assurance program is our commitment to offering you more than just a mixer. These are not just words at Dynamix. We back this approach up with our Solution Assurance Guarantee.

1

2

3

11

22

33

Product LineIf you don’t see exactly what you need We most likely have itIf you are concerned about performance We can configure and guarantee it Ask

Drums & Drum Mixers - MMX Series

Medium Tanks - GMX Series(5000 - 30,000 Gal.)

Totes & Tote Mixers - ITM Series Portable Mixers - DMX Series

Industrial Tanks - Nautilus Series (30,000 - 300,000 Gal.)

(250 - 550 Gal.) (400-5000 Gal.)

(50 Gal.)

(5000 - 30,000 Gal.)

Bung Mount Universal Drum Mount Drum Lid Mount