dual band optical repeater system - | shyam...

1––5

© 2009 Shyam Telecom | All rights reservedSTL-PDS-BTSLink204/208-004 http://www.shyamtelecom.com

Dual Band Optical Repeater System

BTS Link-204/208 with DBROU

Optical DAS Coverage Solutions

2––5

© 2009 Shyam Telecom | All rights reservedSTL-PDS-BTSLink204/208-004

www.shyamtelecom.com

2––5

Optical DAS Coverage Solutions

BTS Link-204/208 with DBROUExtension of BTS Coverage through Optical Fiber Cable

APPLICATION AREAS Indoor/Outdoor Coverage Solutions

High-Rise Buildings, Hospitals, Shop-ping Malls, etc. for Indoor Coverage

Tunnels, Highways & Other Outdoor Locations

BTS-Link 204/208 repeater is a dual band distributed antenna system for point to multi-point indoor/outdoor coverage. It is comprised of a Master Optical Unit (MOU) installed close to the BTS, and Remote Optical Units (ROUs) installed at distant (Indoor/Outdoor) locations. It uses single-mode fiber for connectivity between the MOU and ROUs. The 204 version supports up to 4 ROUs; the 208 version supports up to 8 ROUs.

SALIENT FEATURES Compatible with GSM, CDMA, iDEN, WCDMA and GSMR technologies

Available for SMR 800 MHz / Cellular 850 MHz / SMR 900 MHz / GSM 900 MHz / DCS 1800 MHz / PCS 1900 MHz / UMTS / AWS frequency bands

Compatible with frequency hopping BTS

Low noise and highly linear performance

The MOU receives RF signals in a pre-assigned dual band from the BTS in DL path & trans-mits after conversion to optical signals on single mode fibers to ROUs at different locations. ROU reconverts optical signals to RF signals and radiates after amplification

In the UL path, the ROU receives RF signals from mobile users and converts them to optical signals for transmission to the MOU where signals get reconverted to RF signals for input to BTS

Since the signals between MOU and ROU are propagated as optical signals, antenna isolation problems have no significance

System monitoring is through USB port with easy GUI

Remote CMC monitoring with RF modem (optional) can be incorporated

Remote Management System (OMCR) is optional

RSSI indication, local control & alarms

3––5


BTS Link-204/208 with DBROUMASTER UNIT

MODEL # BTS-204

BTS-208

MOU SPECIFICATIONSRF Input Power Level: 0 to +10 dBm through Directional

CouplerRF Interface Connector: N Type FemaleAttenuation Range: 0-31 dB in steps of 1 dBAttenuation Type: AutomaticOptical Power: - 1.5 dBm Min.Optical Connector: FC-PCPower Supply: Input: AC: 100 - 240 V, 47/63 Hz

DC: - 48 V Power Consumption Approx.: 60 WattsWeight Approx.: 12 kg. (26 lbs.)Dimensions (L x W x H) Approx.: 485 x 400 x 135 mm (19 x 16 x 5 in.)Operating Temperature Range: -5°C to +55°C (+23°F to +131°F)

DUAL BAND MASTER OPTICAL UNIT MOU 204/208

ACCESSORIES Operational Manual

Power Supply Cord

USB Interface Cable

Software (CMC) CD

Patch Cord

Directional Coupler

N-Type Cable All Shyam signal enhancement products can be customized to fit your requirements. Contact the Shyam location nearest you for further details.

4––5


BTS Link-204/208 with DBROUREMOTE UNIT

DBROU SPECIFICATIONSOptical Tx Wavelength: 1550 nmOptical Rx Wavelength: 1310 nmRF Impedance: 50 OhmsAttenuation Range: 0-31 dB in steps of 1 dB Attenuation Type: Automatic/Manual through GUINoise Figure: 5 dB Max.Power Supply: Input: AC 100 - 240 V, 47/63 HzRF Connector: N Type FemaleOptical Connector: FC-PCOptical Distance: 5 Km/ 10 Km/ 20 Km*Optical Power: + 4 dBm Min.Operating Temperature Range: Indoor: -5°C to +55°C

(+23°F to +131°F)Outdoor: -35°C to +55°C (-31°F to +131°F)

DBROU MODELSRF Power Composite (dBm) Min

RF Power P1 (dBm) Min

Power Consumption (Approx.)

Dimensions (Approx.) mm (inches)

Weight (Approx.) kg. (lbs.)

Model Nos.

+19 +26 75 W 472x400x160 (18x15x6)

15 (33) IDROU19 Indoor

+30 +37 100 W 472x400x160 (18x15x6)

15 (33) IDROU30 Indoor

+33 +40 150 W 700x385x210 (27x15x8)

25 (55) ODROU33Outdoor

+37 +44 200 W 800x445x210 (31x17x8)


+40 +47 250 W 800x445x210 (31x17x8)


DUAL BAND REMOTE OPTICAL UNIT DBROU [OUTDOOR]

DUAL BAND REMOTE OPTICAL UNIT DBROU [INDOOR]

* Feature available under specific conditions

5––5


ABOUT SHYAM TELECOMShyam Telecom is a leading global telecom equipment manufacturer supplying innovative indoor and outdoor wireless signal enhancement solutions to more than 100 networks on five continents. The company designs and manufactures cost effective RF and optical distributed antenna solutions that enable mobile operators, real estate developers, neutral-host providers, and businesses to provide seamless wireless coverage within their networks.

Shyam Telecom has been manufacturing RF and fiber equipment for over 30 years, enabling reliable mobile communications for GSM, CDMA, UMTS, and Public Safety. The product line is designed to provide solutions that meet all of today’s network standards, wireless protocols and frequencies to ensure coverage today, and state-of-the art technology to meet the needs of the future.

NEXT GENERATION SIGNAL ENHANCEMENT

Shyam Telecom assumes no responsibility for any inaccuracies in this document.

Shyam Telecom reserves the right to revise this document without notice. Technical specifications, designs and concepts are the sole and exclusive property of Shyam Telecom Ltd. and all rights reserved.

CORPORATE HEADQUARTERSShyam Telecom 246, Phase-IV Udyog Vihar Gurgaon, Haryana 122015 India Phone: 91 124 431 1600

Email: [email protected]

Shyam Telecom Inc.6 Kilmer Road, Suite D Edison, NJ 08817, USA Tel: +1 732 985 1324

Shyam Telecom GmbH Mainaschaffer Str. 113 D-63741 Aschaffenburg, Germany Tel. +49 6021 45 90 10

dual band optical repeater system - | shyam...

Documents