All standard overlaminates are for CR-80 size cards only unless otherwise noted. For custom patterns, logos and security features, ask your Fargo Sales Manager for more details.

PLEASE NOTE! Prices and specifications contained herein are subject to change without notice. HID is not responsible for any typographical errors. This price list is not an offer of sale and all orders are subject to acceptance by HID Global. All sales of products listed herein are subject to the HID Global General Sales Policy available at http://www.hidglobal.com/page.php?page_id=359 , or from your local HID Global sales representative. Please call HID Global, at 1-800-459-5636 (USA and Canada). Outside the USA and Canada, call +1 (952) 941-9470 or FAX +1 (952) 941-7836.

hidglobal.com

2010 HID Global. All rights reserved. HID and the HID logo are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Rev. 07/2010

DTC4500 & HDP5000Overlaminates Pricing

Pricing Chart

FARGO DTC4500 & HDP5000 Standard Overlaminates MSRP List

Part # DescriptionCase Qty

MSRP

82600 PolyGuard 0.6 mil Overlaminate, Clear, 250 count (For use with cartridge 1 or 2*) 20 $70

82601 PolyGuard 1.0 mil Overlaminate, Clear, 250 count (For use with cartridge 1 or 2*) 20 $70

82603PolyGuard 0.6 mil Overlaminate, High Secure Orbit design, Universal orientation, 250 count (For use with cartridge 1 or 2*)

20 $130

82604PolyGuard 1.0 mil Overlaminate, High Secure Orbit design, Universal orientation, 250 count (For use with cartridge 1 or 2*)

20 $130

82607PolyGuard 0.6 mil Overlaminate, half patch for magnetic stripe side of card, Clear, 250 count (For use with cartridge 2*)

20 $58

82608PolyGuard 1.0 mil Overlaminate, half patch for magnetic stripe side of card, Clear, 250 count (For use with cartridge 2*)

20 $58

82612PolyGuard 1.0 mil Overlaminate, with left side cutout for smart chip, Clear, 250 count (For use with cartridge 1*)

20 $80

82615 Thermal Transfer Overlaminate, Clear, 500 count (For use with the Single-Side Lamination Module only) 20 $55

82618Thermal Transfer Overlaminate, High Secure Orbit design, Universal orientation, 500 count (For use with the Single-Side Lamination Module only)

20 $130

82655

PolyGuard 1.0 mil Overlaminate, with left side cutout for large sized smart chip, Clear, 250 count (For use with cartridge 1*). For use with HID Crescendo and other contact chips requiring a larger hole. See the information sheet (Contact Chip Smart Card Ordering Guide) in the Information sheets section under Materials Solutions.

20 $80

* All HDP5000 and DTC4500 lamination modules utilize a cartridge system to load overlaminate materials. A HDP5000 single-sided lamination mod-ule will utilize only cartridge 1, while a dual-sided simultaneous lamination module will utilize cartridges 1 and cartridge 2. The single-sided lamination module can be used for dual-sided lamination as long as the printer has a dual-sided printing module attached. The dual-sided simultaneous lamination module can be used for single or dual-sided lamination.