dse genset dse e800 · 2020. 5. 29. · dse e800 7 other d + w/l ethernet 11 232 485 4 12 2 4 modem...
TRANSCRIPT
DSEE800ENGINE CONTROLLER
DSEGenset
®
The DSEE800 is an easy to useengine controller designed toprovide flexible control with built inmonitoring and protection. TheDSEE800 is compatible with bothelectronic and non-electronic dieselengines and fully configurable for awide range of applications such asengine driven pumps,compressors, hydraulic powerpacks and off highway machinery.
Control of the application can beachieved both automatically andmanually with engine start, speedand clutch control all built in. Themonitoring and configuration ofsystem variables allows thecontroller to start and stop theengine, increase and decreaseengine speed as the outputdemands and program ramping forloading/unloading of the engine.
With the built in PLC editor thecontroller is fully flexible and can beadjusted to meet many differentneeds, providing the user with theability to achieve special operatingmodes which are unique to theirmachine and application. A rangeof comprehensive communicationand system expansion optionsensures that the user can extendthe input and output capability andcommunicate with other devices orsystems offering further advancedand high level use in verydemanding applications. On boardevent, data logging and trendingmakes it possible to determinepreventative maintenance andimproved performance criteria forthe machine.
Using the DSE Configuration SuitePC Software the controller is easyto use and configure which allowsalteration of operating parameters,sequences, timers and alarms.
FEATURES
ENVIRONMENTAL TESTING STANDARDS
ELECTRO MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for theIndustrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for theIndustrial Environment
ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment,including Electrical Business Equipment
TEMPERATUREBS EN 60068Ab/Ae Cold Test -30oCBS EN 60068-2-2Bb/Be Dry Heat +70oC
VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55oC @ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40oC @ 93% RH 48 Hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes15gn in 11mS
DEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP65 - Front of module when installed into thecontrol panel with the supplied sealing gasket.
COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETYOF ENGINE APPLICATIONSDSE2130
DSE2131
DSE2133
DSE2152
DSE2157
DSE2548
RS232 ANDRS485
DSENET®
EXPANSIONUSBPORT
USBHOST
CONFIGURABLEINPUTS
DC OUTPUTS RATIO-METRIC INPUTS
EMERGENCY STOP
DC POWER SUPPLY 8-35V
DSEE8007
OTHER
D +W/L
ETHERNET
11
232 485
4 12
42
PCMODBUSMODEM
VOLT FREEOUTPUTS
PWM OUTPUTS CHARGEALTERNATOR
ELECTRONIC ENGINES
MAGNETICPICK-UP
+
+
ISSUE 1
JOHN DEEREVOLVO
JCB
FUEL & STARTOUTPUTS
PWM
DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL [email protected] WEBSITE www.deepseaplc.com
DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com
055-168/09/13 US (3)
RELATED MATERIALSTITLE PART NO’SDSEE800 Installation Instructions 053-090DSEE800 Operator Manual 057-202DSEE800 PC Configuration Suite Manual 057-203
DSEE800ENGINE CONTROLLER
®
DSEGenset
FEATURES
Registered in England & Wales No.01319649VAT No.316923457
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.
SPECIFICATION
DC SUPPLYCONTINUOUS VOTLAGE RATING8 V to 35 V continuous
CRANKING DROPUTSAble to survive 0 V for 50 mS, providingsupply was at least 10 V before dropout andsupply recovers to 5 V. This is achievedwithout the need for internal batteries.
MAXIMUM OPERATING CURRENT510 mA at 12 V, 238 mA at 24 V
MAXIMUM STANDBY CURRENT226 mA at 12 V, 107 mA at 24 V
MAXIMUM OFF MODE CURRENT180 mA at 12 V, 86 mA at 24 V
CHARGE FAIL/EXCITATION RANGE0 V to 35 V
INPUTSDIGITAL INPUTS A to KConfigurable as:Positive switching Negative switching
RATIOMETRIC INPUT AConfigurable as:Negative switching digital input0 V to 10 V4 mA to 20 mA0 Ω to 480 Ω RATIOMETRIC INPUTS B to LConfigurable as:Negative switching digital input0 V to 10 V4 mA to 20 mA0 Ω to 1920 ΩOUTPUTSDC OUTPUT A (FUEL) & B (START)10 A short term, 5 A continuous at supply voltage
VOLT-FREE OUTPUTS C & D5 A DC at 35 V DC8 A AC at 250 V AC
DC OUTPUTS E, F, G & H2 A DC at supply voltage
PWM OUTPUTS I, J, K & L4 A at supply voltage20 Hz to 250 Hz
PULSE PICK-UPVOLTAGE RANGE±0.5 V to 60 V RMSFully isolated
FREQUENCY RANGE10,000 Hz (max)
BUILT-IN GOVERNOR CONTROLMINIMUM LOAD IMPEDANCE 1000 ΩFully isolated
GAIN VOLTAGE 0 V to 10 V DC
OFFSET VOLTAGE ±10 V DC
DIMENSIONSOVERALL240 mm x 172 mm x 57 mm9.4” x 6.8” x 2.2”
PANEL CUTOUT 220 mm x 160 mm8.7” x 6.3”
MAXIMUM PANEL THICKNESS8 mm0.3”
OPERATING TEMPERATURE RANGE-40 °C to +80 °C
STORAGE TEMPERATURE RANGE-40 °C to +85 °C
KEY FEATURES• Built-in governor control• Automatic speed control• Manual speed control via pushbuttons, digital input or analogueinput
• Automatic speed ramping• Flexible automatic start control • Clutch control• 4-Line back-lit LCD text display• Multiple display languages• Five key menu navigation• Front panel editing with PINprotection
• Customisable status screens• Power save off mode• Configurable digital inputs (11)• Configurable ratiometric inputs (12)
• Configurable DC outputs (4)• Configurable volt-free outputs (2) • Configurable PWM outputs (4)• Configurable timers and alarms• 3 configurable maintenancealarms
• Multiple date and time enginescheduler
• Configurable event log (250)• CAN engine support• Advanced Integral PLC editor
• CAN, Magnetic Pick-up ortachometer speed sensing
• Fuel usage monitor and low fuelalarms
• Charge alternator failure alarm• Manual fuel pump control • “Protections disabled” feature• LED and LCD alarm indication• USB connectivity• Backed up real time clock• Fully configurable via DSEConfiguration Suite PC software
• Configurable display languages• Remote SCADA monitoring viaDSE Configuration Suite PCsoftware
• User selectable RS232, RS485 &Ethernet communications
• Modbus RTU & TCP support• User configurable MODBUSpages
• Advanced SMS control and faultmessaging (additional GSMmodem required)
• Start & stop capability via SMSmessaging
• Additional display screens tohelp with modem diagnostics
• DSENet® expansion compatible• Data logging and trending
KEY BENEFITS• 132 x 64 pixel ratio display forclarity
• Real-time clock providesaccurate event logging
• Set maintenance periods can beconfigured to maintain optimumengine performance
• Ethernet communicationsprovides built in advancedremote monitoring.
• Can be integrated into remotemonitoring systems
• Increased input and outputexpansion capability via DSENet®
• Licence-free PC software• IP65 rating (with supplied gasket)offers increased resistance towater ingress
• Advanced PLC editor allows userconfigurable functions to meetapplication requirements.