drum set : assembly instructions€¦ · drum set : assembly instructions parts sheet (pattern) :...

View of completed model

Front Right side

Left sideBack

PAGE01

Drum set : Assembly Instructions

Parts sheet (Pattern) : Twenty-two A4 sheets (No.1~No.22)

No. of Parts : 384

Assembly Instructions : Ten A4 sheets (No.1~No.10)

*Build the model by carefully reading the Assembly Instructions, in the parts sheet page order.

*Assembly will be easier if you write the part's number on the back of each part.

A drum set is a collection of various types of drums, cymbals and other percussion instruments that are lined up in a formation that makes them easily played by one person. The number and type of instruments included can be arranged according to the performer's preference or characteristics of the music. The performer usually plays seated on a stool. The idea for the drum set is said to have originated in military bands, when a cymbal was placed on top of the bass drum to make it easier for the performer holding it. This was followed by the idea to use a pedal to play the bass drum with the foot, and the invention of the hi-hat, two cymbals on top of each other that are clashed together. These adaptations have resulted in the drum set up and beat style we know today.

Trace along the folds with a ruler and a used pen (no ink) to get a sharper, easier fold.

Handy Hint

Mountain fold (dotted line)Make a mountain fold.

Glue, scissors and other tools may be dangerous to young children so be sure to keep them out of the reach of young children.

Scissors, set square, glue (We recommend stick glue),pencil, used ballpoint pen, toothpicks, tweezers,(useful for handling small parts)

Assembly tip CautionAssembly Instructions Tools and materials

Valley fold (dashed and dotted line)Make a valley fold.

Scissors line (solid line)Cut along the line.

Cut In line (orange solid line)Cut a slot.

Cut out (orange shaded)Cut out the area marked.

The glue spot(colored dot)shows where to apply the glue.

Glue spot (Red dot)Glue parts with the same number together.

Glue spot (Green dot)Glue within the same part.

Glue spot (Blue dot)Glue to the rear of the other part.

Glue spot (Yellow dot)Apply glue to the back, and attach to the back of the other parts.

Before gluing, crease the paper along mountain fold and valley fold lines and make sure rounded sections are nice and stiff.


Wrapping the piece around a can or other cylindrical object will result in a neater finish.

Handy Hint:

PAGE02

PAGE03

Bass drum

Front side

Front side

Back side

Back side

*NB: Begin from the opposite side to the seam.

Upper part

Front side

Front side

Back side

Back side

Align the marker lines on 3A and 3B with the glue spots on 3C ~ 3H, and attach.

*Align the reverse sides and attach.

*NB: Align the thick marker line with the upper part, and insert it through to the front side. Do not apply glue.

*Attach to the display stand later.

Before starting.

Each page of the "Parts sheet" has a sheet number in the top left-hand corner (Sheet No.1~No.22). Work in order of these sheet numbers. (The parts for assembly are on pages 2 ~ 22.)

There are 384 parts in total, and each part is numbered according to its page.Also, the glue spots on each part are marked with the number of the part to attach to them.

The numbers ~ in the Assembly Instructions indicate the order to attach parts. Follow this order when attaching.

When one part has multiple spots to attach, or glue spots for attaching other pieces, colors ( ) and numbers are used to show the precise location and method for attaching. Check the diagrams in the "Assembly Instructions" carefully for each part as you work.

Diagonal line

Seam

Bass drum

Lower part

Upper part

Upper part

*Take note of where the thick marker line is.



Upper part

Lower part*Align the reverse sides and attach.

*Be sure to align the thick black marker lines on the top and bottom (circled here in blue) when attaching.

Inside

*Attach the back.

Wrapping the piece around a thin cylindrical object will result in a neater finish.

Align the seam lines and insert the pieces inside each other, and attach to the specified position.

Assemble both the left and right parts so that their seams face outwards.

Face the seam line inwards and insert the piece to the position specified.

PAGE04 PAGE05

PAGE06

*Roll up and attach.


*Do not attach the area marked with the diagonal lines.

*After attaching, swivel the pieces around as shown, so that the seams face inwards.

*Attach the parts circled in blue around the tom holder pipes so that the pipes are held up vertically.

Seam line

Tom holder pipe

Tom-tom 13" x 10"

Bass drum Bass drum



PAGE06

*Before attaching parts 6O and 6P, bend them into shape as shown in the diagram.

*Begin from the opposite side to the seam. *Begin from the opposite side to the seam.

PAGE07

*NB: Align the thick marker line with the specified position on the upper part, and insert it through. Do not apply glue.

*NB: There are 12 6Q parts altogether. One of them, marked 6Q-1, has a specific location for attaching.

Take note of the markings*Before attaching parts 7P and 7Q, bend them into shape as shown in the diagram.



*NB: Align the thick marker line with the specified position on the upper part, and insert it through. Do not apply glue.

Tom-tom 13" x 10"

Upper part

Lower partSeam

Lower part

Upper part

*Do not apply glue to .

Tom-tom 12" x 9"

Upper part

Lower part



Seam

Upper part

Lower part

Lower part

Upper part *Do not apply glue to .

Take note of the markings *NB:

There are 12 7R parts altogether.One of them, marked 7R-1, has a specific location for attaching.

Specified position

Specified position


PAGE02 03 04 05 06 07

Bass drum / Tom-tom 13" x 10" / Tom-tom 12" x 9"PAGE08

Floor tom

PAGE09

*NB: There are 16 8H parts altogether.

Head

Bass drum front head

Shell

Bass drum bar

Tom holder

Bass drum hook

Lug

Bass drum

Tom-tom 13" x 10"Tom-tom 12" x 9"

Lug

*Begin from the opposite side to the seam.

Lower part




*Before attaching parts 8F and 8G, bend them into shape as shown in the diagram.

Floor tom

Upper part

Lower part

Seam

Upper part

Lower part

*Do not apply glue to . *NB: Align the thick marker line with the specified position on the upper part, and insert it through. Do not apply glue.



Specified position


PAGE09

Floor tom

PAGE10

Snare drum

PAGE11

Leg

Rubber foot

Upper part

Lower part

Lower part Upper part

Align the snare wire position and fit the head on. Do not apply glue.



*After completing the stand, place the snare drum on the arm. Do not apply glue.

*Before attaching parts 10R and 10S, bend them into shape as shown in the diagram.

*Begin from the opposite side to the seam.

Snare wire picture



Rubber arm

Stand

Rubber foot

Snare wire position

Head

Shell

Lug

Lug

Head

Shell

Upper part

Lower part

Seam

*NB: There are 8 10T parts altogether.





Snare drum

*Align the snare wire position here.


PAGE12




*Align the seams and attach.



Ride cymbalPAGE13

Crash cymbal




Rubber foot

Rubber foot

Stand

Stand

Cymbal stand nut

Die-cast joint

Die-cast joint

Angle adjustment tilter

Die-cast joint

Die-cast joint

Cymbal

Cymbal


Felt for clutch





PAGE14

Hi-hat cymbal

Rubber foot

Stand

Extension rod

Hi-hat clutch

Hi-hat cymbal

Die-cast joint

*The hi-hat cymbal moves when you press the foot pedal.

*Put the pieces back to back and attach together.

*Back side of 14C

Curl.

Foot pedal

Foot pedal

*Roll up and attach.*Roll up and attach.

Hi-hat cymbal







PAGE14 15


PAGE15

*Bend the pieces left and right to open a gap.

*Back side of 16B

Drum pedalPAGE16

Drum stool

Seat

Leg

Rubber foot

*The felt beater moves when you press the foot pedal.

Foot pedal

Felt beater

Frame


Do not apply glue.




Ride cymbal

Crash cymbal

Tom-tom 13" x 10"

Tom-tom 12" x 9"

Hi-hat cymbal

Snare drum

Floor tom

Drum stool

Bass drum

Drum pedal

PAGE10


Display stand

*The completed photo is an image of a basic drum set. The parts can be arranged to your liking.

*Fold inside and attach.

Display stand

Display standPAGE17 18 19

PAGE20 21

PAGE21 22

View of completed model

drum set : assembly instructions€¦ · drum set : assembly instructions parts sheet (pattern) :...

Documents