drillquip mls ssystem catalog ms15_mudline.pdf
TRANSCRIPT
-
DRIL-QUIP, INC.OFFSHORE DRILLING AND PRODUCTION EQUIPMENT
DRIL-QUIP, INC.OFFSHORE DRILLING AND PRODUCTION EQUIPMENT
DRIL-QUIP WESTERN HEMISPHERE DRIL-QUIP, Inc. World Headquarters13550 Hempstead Hwy.Houston, Texas 77040Tel (713) 939 7711Fax (713) 939 8063
DRIL-QUIP do Brasil, LTDA.Maca, BrazilTel (55) 22 2791 8950Fax (55) 22 2791 8989
DRIL-QUIP New OrleansNew Orleans, LouisianaTel (504) 522 5566Fax (504) 522 4426
DRIL-QUIP Dallas Addison, TexasTel (972) 588 1831Fax (972) 588 1832
DRIL-QUIP ASIA-PACIFICDRIL-QUIP Asia-Pacific Pte. Ltd.No. 9, Tuas Avenue 12Singapore, 639031Tel (65) 6861-0600Fax (65) 6861-5700
DRIL-QUIP ChinaBeijing, P.R. ChinaTel (86) 10 6410 5350Fax (86) 22 2580 7130
DRIL-QUIP Oilfield ServicesTianjin Co., Ltd.Tanggu, Tianjin, P. R. ChinaTel (86) 22 2580 7466Fax (86) 20 6465 1240
DRIL-QUIP MalaysiaTel (60) 3 2168 4308 (60) 3 2168 4309Fax (60) 3 2168 4201
DRIL-QUIP BahrainBudaiya, Kingdom of BahrainTel (973) 1779 0552Fax (973) 1779 2745
D.Q. Holdings Pty., Ltd.Perth, AustraliaTel (61) 8 9322 8600Fax (61) 8 9322 8500
DRIL-QUIP Warehouse (Darwin)Pinelands, AustraliaTel (61) 8 8932 9022Fax (61) 8 8932 8084
DRIL-QUIP Great Yarmouth Great Yarmouth,Norfolk, EnglandTel (44) (0) 1502 538688Fax (44) (0) 1493 844460
DRIL-QUIP France, SARLParis, La Defense, FranceTel (33) 1 72 75 74 05Fax (33) 1 72 75 72 99
DRIL-QUIP Egypt forPetroleum Services S.A.E.Zahraa El-Maadi, Cairo, EgyptTel (20) 2 753 8809Fax (20) 2 753 8907
DRIL-QUIP Nigeria, Ltd.Port Harcourt, NigeriaTel (234) 84 463866Fax (234) 84 463649
DRIL-QUIP EASTERN HEMISPHEREDRIL-QUIP (Europe), Ltd.Stoneywood Park, DyceAberdeen, Scotland, UK AB21 7DZTel (44) (0) 1224 727000Fax (44) (0) 1224 727070
DRIL-QUIP LondonHigh Wycombe, Bucks, EnglandTel (44) (0) 1494 601086Fax (44) (0) 1494 601094
DRIL-QUIP NorwayStavanger, NorwayTel (47) 51 443700Fax (47) 51 443701
DRIL-QUIP The NetherlandsBeverwijk, The NetherlandsTel (31) (0) 251 22 9250Fax (31) (0) 251 22 0044
DRIL-QUIP DenmarkEsbjerg, Denmark 6700Tel (45) 7518 0944Fax (45) 7518 0640
www.dril-quip.com
MS-15 MUDLINESUSPENSION SYSTEMS
-
MS-15 Mudline SuSpenSion SySteMS
table of ContentS
MS-15 Mudline Suspension System . . . . . . . 2
MS-15 System Components . . . . . . . . . . . . . . . 3
Shoulder Hangers . . . . . . . . . . . . . . . . . . . . . . . . . 4
Split Ring Hangers . . . . . . . . . . . . . . . . . . . . . . . . 5
Mudline Hanger Running Tools . . . . . . . . . . . . . 6
Profile Cleanout Tools . . . . . . . . . . . . . . . . . . . . . 7
Temporary Abandonment Caps . . . . . . . . . . . . . 8
Accessory Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Tie-Back Phase and Tools . . . . . . . . . . . . . . 10-11
Mudline Conversion System . . . . . . . . . . . . . 12
Dril-Thru Completion System . . . . . . . . . . 13
Mudline-Related Products . . . . . . . . . . . . . . . 14
Strength & Dimension Charts . . . . . . . . . . . . 16
-
1dril-Quip: leader in teChnology and Quality
Recognized worldwide for cutting-edge exploration, drilling and production technology, Dril-Quips state-of-the-art equipment, support and service give unique advantages to operators in todays tough environments.
Dril-Quip provides consistent high quality products in accordance with industry standards, employing the most advanced equipment and techniques available to ensure dimensional accuracy and performance reliability.
Our engineering staff brings their proven skills and experience to bear on the complex challenges encountered in the field, helping operators find viable product solutions for industry applications.
-
Dril-Quips unique MS-15 Mudline Suspension System is a series of casing hangers that support the weight of each casing string at or near the mudline. Designed for use with bottom-supported drilling vessels and platforms, the system allows disconnect from and reconnect to the well at the mudline.
SySteM featureS
High pressure capacity; system rated for 15,000 psi working pressure
High load capacity at each hanger interface
Easy handling, trouble- free operation
Hangers have left-hand running threads, right-hand tie-back threads
Metal-to-metal seals on running and tie-back tools with resilient backup seals
Automatic centralization ensures concentricity
Stack-down system for washout efficiency and easy access to tie-back thread profile
Designed for tempo- rary abandonment
Designed with large flow-by areas
Subsea completion possible with Dril-Quips Mudline Conversion System
Critical service configurations available
Extra metal-to-metal sealing for higher pressure and critical service
Extra centralization for high-angle drilling
Heavier wall for greater load and pressure capacity
Fully tested
Field-proven technology
Torque tool option available for running tools
2
MS-15 Mudline SuSpenSion SySteM
-
3Drilling Phase
TemPorary abanDonmenT Phase
MS-15 SySteM CoMponentS
20" Shoulder Hanger
13 3/8" Shoulder Hanger
Buttweld Sub
9 5/8" Split Ring Hanger
7" Split Ring Hanger
Running Tools
30" Corrosion Cap
30" Quick-Jay Connector
Temporary Abandonment Caps
-
4The Shoulder Hanger will use a multiple load shoulder profile in
the hangers ID to transition to the Split Ring Hanger for running
casing string with higher load-carrying requirements.
There are two types of Casing Hangers utilized in the MS-15 Suspension System: Shoulder Hangers and Split Ring Hangers. Shoulder Hangers are generally required with larger-size casing strings and are used when enough annular space exists to allow a single load shoulder to hang the casing load and still pass the drill bit needed for the casing string. The Shoulder Hanger features either a single or multiple load shoulder profile in the ID, depending on the casing program.
High pressure, high load capacity
Easy installation; weight- set hanger
Field-interchangeable landing rings accommodate changes in casing programs
Large flow-by areas for run-ning and cementing
Full 360-degree load- bearing area on landing ring for maximum load-carrying capacity
Unique, two-step landing ring provides automatic centralization when landed
Independent metal-to-metal sealing surfaces; one for running tools, one for tie-back tools
featureS
Shoulder hangerS
Running Tool Metal- to-Metal Seal Area
Right-Hand Tie-Back Threads
Left-Hand Running Threads
Two-Step Landing Ring
Multiple Load Shoulders for
Split Ring Hanger
Split Ring Hanger
Tie-Back Tool Metal-to-Metal Seal Area
shoulDer hanger wiTh mulTiPle loaD shoulDer hanger Profile anD sPliT ring hanger insTalleD
Running Tool Metal- to-Metal Seal
Right-Hand Tie-Back Threads
Left-Hand Running Threads
Two-Step Landing Ring
Single Load Shoulder for Shoulder Hanger
shoulDer hanger wiTh single shoulDer Profile
-
5When casing loads exceed a single load shoulders ability to support the weight of the casing string, the MS-15 system uses a unique Split Ring Hanger with a multiple load shoulder profile. The systems patented split ring and detent ring accommodate high loads while allowing passage of required drill bit sizes.
High pressure, high load capacity
Large flow-by areas during running and cementing
Unique design ensures full engagement of each split ring load shoulder with mating profile
featureS
Split ring Setting SeQuenCe
Positive backup of split ring when landed
Detent ring allows hanger resetting while eliminating shear pins and tensile coupons
Dual metal-to-metal seals; one for running tools, one for tie-back tools
1. running PosiTion
Hanger Body
Load Ring
Split Ring multiple load shoulders on split ring protected from casing ID while running
Detent Ring elimi-nates premature vertical movement of split ring
Hanger Body provides full centralization with load ring above split ring and retainer ring below split ring
Split Ring energy in split ring forces multiple load shoulders into mating profile of outer hanger ID
2. lanDeD/noT DeTenTeD 3. DeTenTeD PosiTion
Load Ring maintains large flow-by area and provides high load capacity at interface of split ring and hanger
Hanger Body backup shoulder provides full backup behind top of split ring
Detent Ring activated by casing weight and centralizes split ring, provides full backup behind bottom of split ring
Split ring hangerS
-
The MS-15 Mudline Hanger Running Tool allows the casing string to be run and landed in the pre-vious mudline hanger. The running tool incorporates tangentially bored washports for cleaning the annulus between casing strings. The tools left-hand threads allow the use of right-hand rotation to remove the running string or open the washports.
Right-hand rotation of approximately six turns with weight picked up opens washports for washout of casing. After wash-
out, weight is slacked off and running tool is made up.
OPEN CLOSED
sTab-in running Tool
OPEN CLOSED
ThreaDeD running Tool
Right-hand rotation of approximately six turns opens wash-ports for washout of casing. After washout, running tool is
made up with six turns to the left.
featureS
6
Mudline hanger running toolS
High pressure, high load capacity
Low torque make-up
Self-aligning profile allows full alignment with hanger prior to thread engagement
Slots for direct make-up of running tool with torque tool are optional
Optional stab-in running tools for mudline hangers 16" and larger eliminate left-hand rotation
Dual O-rings above washports
Seal below washport never exposed during wash operations
One-way seal on nose of pin prevents pressure lock during make-up
Field-proven performance
-
Run on drill pipe, the MS-15 Profile Cleanout Tool is used to verify the distance to the multiple load shoulder profile and prepares the mudline hanger ID for the split ring hanger. The profile cleanout tool is rotated to clean out the multiple load shoulder ID. Wash fluid can be pumped through the drill pipe during this operation.
7
RUNNING PROFILE CLEANOUT TOOL
PROFILE CLEANOUT TOOLLANDED
Profile cleanout tool cleaning outmultiple-load shoulder with indicatorring sheared and moved up into sheared position
Profile cleanout tool being run insideriser with notched split ring in retracted position
running Profile CleanouT Tool
RUNNING PROFILE CLEANOUT TOOL
PROFILE CLEANOUT TOOLLANDED
Profile cleanout tool cleaning outmultiple-load shoulder with indicatorring sheared and moved up into sheared position
Profile cleanout tool being run insideriser with notched split ring in retracted position
Profile CleanouT Tool lanDeD
Notched split ring for thorough cleaning of multiple load shoulder profile in ID of previ-ously-run hanger body
Jet ports for washing out multiple load shoulder profile
Indicator ring verifies full cleanout of multiple load shoulder profile
Used to verify the distance to the multiple load shoulder profile
featureS
profile Cleanout toolS
-
The MS-15 Mudline Suspension System offers Temporary Abandonment (TA) Caps that protect each mudline hangers tie-back profile from debris during abandonment and while the well is in suspension. Temporary Abandonment Caps make up in the hanger running tool threaded profile and supply resilient seals between the TA Cap and the mudline hanger.
The MS-15 system also offers a simple, weight-set, rotation-lock stab-in TA Cap. When angular misalignment is a problem, this cap allows temporary abandonment of the mudline hanger. The caps threaded split lock ring engages the running threads in the mudline hanger.
Threaded TA Cap Stab-In TA Cap
featureS
Simple installation
Caps make up into left-hand running threads, protecting tie-back threads
Full alignment prior to make-up
Available vented or with back-pressure valve
Low torque make-up
Optional stab-in TA cap allows weight-set make-up
8
teMporary abandonMent CapS
Temporary Abandonment Cap Running and Retrieving Tool
An overshot type tool with three J-slot profiles, the MS-15 TA Cap Running and Retrieving Tool runs on drill pipe and lands on the TA cap mandrel with running and retrieving J-lugs.
featureS
Removable back-pressure valve stinger available
Seals and locks to top of TA cap mandrel
Porting for pressure control of well
TA cap running and retrieving tool installing a vented TA cap
VENTED TA CAP
TA cap running and retrieving tool ins-talling a TA cap with back-pressure valve
TA CAP WITHBACK-PRESSURE VALVE
TA cap running and retrieving tool installing a TA cap with back-pressure valve
Ta CaP wiTh baCk-Pressure ValVe
TA cap running and retrieving tool installing vented TA cap
VenTeD Ta CaP
TA Cap Running Tool
-
Tie-Back Profile Cleanout Tool Dril-Quips Tie-Back Profile Cleanout Tool runs on drill pipe. It is used to wash out the tie-back thread profile and the sealing surface between the tie-back tool and the mudline hanger ID.
Temporary Abandonment Cap Mill and Flush ToolThis component of the MS-15 Mudline Suspension System cleans off the running and retrieving man-drel located on the TA cap. This prepares the TA cap retrieval J-lugs for easy access with the TA cap run-ning and retrieving tool.
featureS
Tie-Back Profile Cleanout Tool
Runs on drill pipe
Available for any size Dril-Quip TA cap
Mills large debris from around TA cap mandrel
Jetting nozzles wash debris from around TA cap mandrel
Temporary Abandonment Cap Mill and Flush Tool
Uses top of hanger as reference point for positioning washout holes at tie-back threads and tie-back sealing surface
Available for any size Dril-Quip mudline hanger
Tie-Back Profile Cleanout Tool
TA Cap Mill and Flush Tool
9
Tie-back profile cleanout tool cleaning out tie-back threads and metal-to-metal seal
TA cap mill and flush tool cleaning TA cap running and retrieving mandrel
Tie-baCk Profile CleanouT Tool Ta CaP mill anD flush Tool
aCCeSSory toolS
-
The stack-down configuration and unique design features of the MS-15 Mudline Suspension System make it an excellent choice for production wells.
Centralizing shoulders on each hanger body help establish concentricity around the centerline of the well. Centralized tie-back tools incorporate an alignment profile that forces full alignment between the tool and the hanger body prior to any thread engagement. Special stab-in tie-back tools are available to solve problems with angular misalignment and platform-to-well misalignment.
SySteM featureS
System stacks down to fully expose tie-back threads
Reliable metal-to-metal sealing
Tie-back threads and sealing areas are unused and protected during drilling
Hangers have left-hand running threads, right-hand tie-back threads
All strings tie back using right-hand rotation
13 3/8" Shoulder Hanger
30" Buttweld Sub
7" Split-Ring Hanger
9 5/8" Split-Ring Hanger
20" Shoulder Hanger
Threaded Tie-Back Tools
Stab-In Tie-Back Tools
Split Ring
Detent Ring
10
Tie-baCk sTab-in
Tie-baCk Phase
tie-baCk phaSe
-
Dril-Quips MS-15 Tie-Back Tools reconnect the mudline hanger to the surface for completion. For subsea completion, the tools tie the well back to a tubing head.
The Stab-In Tie-Back Tool offers a simple, weight-set design that provides an easy way to tie back to the well when platform misalignment is a problem. It includes a threaded split lock ring that engages the tie-back threads in the top of each mudline hanger.
featureS
Fully aligned prior to make-up
High pressure containment provided by metal-to-metal primary seal and resilient backup seals
Sized to match each Dril-Quip mudline hanger
Threaded tie-back tool makes up with just six right-hand turns for metal-to-metal seal with resilient backup
Stab-in tie-back tools resilient seals are weight set; metal-to-metal seals energize with to 1 right-hand rotations
Threaded Tie-Back Tool
Tie-BackTorque Tool
Stab-In Tie-Back Tool
11
Run on drill pipe, Dril-Quips Tie-Back Torque Tool is used to apply high direct torque to the Stab-In Tie-Back Tool.
featureS
Spring-loaded torque keys for easy torque slot engagement
Sized to match each Dril-Quip tie-back tool
Can be used to apply torque to mudline hanger running tools equipped with torque slots
Tie-baCk Torque Tool
tie-baCk toolS
-
Subsea completions on mudline-suspended wells are possible with Dril-Quips Mudline Conversion System. This system of adapters provides an efficient way to convert a mudline suspension system for subsea completion.
SySteM featureS
Subsea tubing hanger installs through BOP stack and riser for safe rig operations
Metal-to-metal sealing profile optional in tubing hanger ID
Diver-friendly make-up adapter ring on tubing head provides centralization, maximum height adjustment and rigid support
Tubing head provides internal lockdown profile for annulus metal-to-metal sealing and positive lockdown of tubing hanger
Field-proven tubing hanger systems available
Mudline ConverSion SySteM
12
Tubing Hanger
Adapter Ring
Subsea Tree
Stab-In Tie-Back Tool
Tubing Hanger w/ Radial Bolt Connector Profile
Bit Guide
MUDLINE
Typical tie-back conversion; alternative casing programs and configurations available upon request
Mudline
-
SySteM featureS
Drilling and completion work possible through conventional BOP equipment
Wellhead hanger housing can accommodate several casing hangers and a tubing hanger
Internal lockdown profile for positive lockdown of tubing hanger
Metal-to-metal sealing throughout
Diver or diverless tree make-up
Field-proven performance
13
The Dril-Thru Mudline Completion System is a unique mudline suspension system designed to accept subsea tubing hangers and subsea completion trees without the use of adapters. This system simplifies operations when it is known in advance that the well will be completed with a subsea tree.
dril-thru Mudline CoMpletion SySteM
ProDuCTion Phase
Drilling Phase
Mudline Hanger Wellhead Housing
Wellhead Housing Running Tool
Tubing Hanger
Tubing Hanger Running Tool
20" Dril-Thru Mudline Hanger
Production Casing Hanger
-
14
CS-10 CASING SUPPORT SYSTEM
Dril-Quip fabricatescomplete casing joints for both drilling and driving applications . Dril-Quip offers a variety of connectors that are ideal for use with mudline suspension equipment .
Quik-Thread Connectors
Quik-Jay Connectors
Quik-Stab Connectors
Multi-Thread Connectors
The CS-10 Casing Support System is used primarily in platform applications to decrease load on the platform by hanging casing off at the mudline.
Cs-10 Casing suPPorT sysTem
sPeCialTy Casing ConneCTors
Dril-Quip offers a high pressure, high temperature mudline suspension system for use in critical-service applications. These critical-service systems incorporate all of the field-proven features of the MS-15 and include additional metal-to-metal sealing and centralization.
TIE-BACK PRODUCTIONDRILLING MODE
CRITICAL SERVICE SYSTEM
Drilling moDe Tie-baCk ProDuCTionCriTiCal serViCe sysTem
dril-Quip: a Single-SourCe Supplier for Mudline-related produCtS
-
The SC-90 Conventional Wellhead is a cost-effective wellhead for land, jack-up or platform drilling and completion applications.
SC-90 CONVENTIONALWELLHEAD SYSTEM
Dril-Quips Unitized Wellhead System adapts to most casing programs, has dual metal-to-metal seals and is available for standard or H2S service.
The SU-90 Unitized Wellheads compact design, along with accessories for height and tension adjustment, make it ideal for use on platforms and with MS-15 Mudline Suspension Systems.
SU-90 UNITIZEDWELLHEAD SYSTEM
su-90 uniTizeD wellheaD sysTem
sC-90 ConVenTional wellheaD sysTem
Dril-Quip offers traditional and unitized surface wellheads for use in with its mudline suspension product line for jacket and platform applications. The companys surface wellhead equipment is offered in a variety of sizes, configurations and service ratings. Dril-Quips unitized surface wellheads feature metal-to-metal sealing technology and simplified operational procedure to reduce installation time.
15
Dril-Quips surface completion trees have been designed to incorporate metal-to-metal sealing technology and safe, effective production solutions for onshore and offshore well developments. The Companys trees include API-monogrammed gate valve components that are designed to comply with all applicable API specifications and Dril-Quips ISO 9000, 9001 Quality System. Dril-Quip utilizes a variety of tests to verify the performance of its trees and valves to ensure the highest possible standards.
Dril-Quip template systems provide the operator with the ability to arrange production wells in a pattern. This eliminates the possibility of intersecting wells or well misalignment by forcing direct centerline-to-centerline well spacing. All Dril-Quip template systems come with the required alignment and concentricity accessories to facilitate vertical installation of equipment during the drilling phase. Dril-Quip template systems supply alignment features to the jacket installation and also provide trouble-free operations during the tie-back phase.
dril-Quip: a Single-SourCe Supplier for Mudline-related produCtS
-
SIZE(inches)
24
24 x 16
16 x 103/4
103/4 x 75/8
TYPEHANGER
SH
SH
SP
INTERNALYIELD
PRESSURE(psi)
5,000
12,000
15,000
TENSIONYIELD
PRESSURE (x 1,000 lbs)
3,300
3,300
1,700
1,200
MAX.OD
(inches)
21.125
14.500
9.500
HANGER WILLRUN THROUGH
211/4" BOP
16" x 109 lb/ft. Csg.
10 3/4" x 60.7 lb/ft. Csg.
MIN. ID(inches)
22.240
13.802
9.928
6.802
MAX.BIT
SIZE(inches)
22
133/4
97/8
63/4
24" x 16 "x 103/4" x 7 5/8" Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
MIN.RETURN
AREA(sq in)
24
12
6
30
30 x 20
20 x 133/8
133/8 x 95/8
95/8 x 7 (32-38 lb)
SIZE(inches)
SH
SH
SP
SP
TYPEHANGER
5,000
10,000
16,500
17,500
INTERNALYIELD
PRESSURE(psi)
3,800
3,800
2,400
2,000
700
TENSIONYIELD
PRESSURE (x 1,000 lbs)
27.250
18.510
12.188
8.375
MAX.OD
(inches)
48
13
10
5
MIN.RETURN
AREA (sq in)
30 x 1" Wall Pipe
20" x 133 lb/ft. Csg.
133/8" x 72 lb/ft. Csg.
95/8" x 53.5 lb/ ft. Csg.
HANGER WILLRUN THROUGH
26.250
17.553
12.490
8.803
5.905
MIN. ID(inches)
26
171/2
121/4
83/4
57/8
MAX.BIT
SIZE(inches)
30" x 20" x 133/8" x 95/8" x 7 " Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
30
30 x 133/8
133/8 x 95/8
95/8 x 7 (32-38 lb)
SIZE(inches)
SH
SP
SP
TYPEHANGER
9,700
16,500
17,500
INTERNALYIELD
PRESSURE(psi)
2,900
2,900
2,000
900
TENSIONYIELD
PRESSURE (x 1,000 lbs)
21.125
12.188
8.375
MAX.OD
(inches)
28
10
5
MIN.RETURN
AREA(sq in)
211/4" BOP
133/8" x 72 lb/ft. Csg.
95/8" x 53.5 lb/ft. Csg.
HANGER WILLRUN THROUGH
20.125
12.490
8.803
5.905
MIN. ID(inches)
20
121/4
83/4
57/8
MAX.BIT
SIZE(inches)
30" x 133/8" x 95/8" x 7" Casing Program (211/4 " BOP)
SH Indicates shoulder type hanger SP Indicates split ring type hanger
Dril-Quip manufactures and stocks a wide variety of mudline suspension systems to match most casing programs. The following charts are for typical casing programs. Contact a Dril-Quip representative to obtain strength-and-dimension charts for specific casing programs.
16
36
36 x 24
24 x 185/8
185/8 x 133/8
133/8 x 9 5/8
95/8 x 7 (32-38 lb)
SIZE(inches)
SH
SP
SP
SP
SP
TYPEHANGER
5,000
7,500
11,000
16,500
17,500
INTERNALYIELD
PRESSURE(psi)
5,000
5,000
4,500
3,000
2,000
710
TENSIONYIELD
PRESSURE(x 1,000 lbs)
29.250
22.000
17.000
12.188
8.375
MAX.OD
(inches)
48
15
12
10
5
MIN.RETURN
AREA(sq in)
291/2" BOP
243/4" Wall Pipe
185/8" x 136 lb/ft. Csg.
133/8" x 72 lb/ft. Csg.
95/8" x 53.5 lb/ ft. Csg.
HANGER WILLRUN THROUGH
28.250
22.240
17.553
12.490
8.803
5.905
MIN. ID(inches)
28
22
171/2
121/4
83/4
57/8
MAX.BIT
SIZE(inches)
36" x 24" x 185/8" x 133/8" x 95/8" x 7 " Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
36
36 x 36
26 x 20
20 x 133/8
133/8 x 95/8
95/8 x 7(32-38 lb)
SIZE(inches)
SH
SP
SP
SP
SP
TYPEHANGER
3,000
5,000
10,000
16,500
17,500
INTERNALYIELD
PRESSURE(psi)
4,500
3,700
3,500
3,000
2,250
910
TENSIONYIELD
PRESSURE(x 1,000 lbs)
29.250
24.000
17.446
12.188
8.375
MAX.OD
(inches)
291/2" BOP
26" x .812" Wall Pipe
20" x 1.00" Wall Pipe
133/8" x 72 lb/ft. Csg.
95/8" x 53.5 lb/ft. Csg.
HANGER WILLRUN THROUGH
28.250
24.125
17.553
12.490
8.803
5.905
MIN. ID(inches)
28
24
171/2
121/4
83/4
57/8
MAX.BIT
SIZE(inches)
36" x 26" x 20"x 133/8" x 95/8" x 7 " Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
22
28
13
13
5
MIN.RETURN
AREA (sq in)
SIZE(inches)
30
30 x 16
16 x 103/4
103/4 x 75/8
TYPEHANGER
SH
SP
SP
INTERNALYIELD
PRESSURE(psi)
5,000
12,000
15,000
TENSIONYIELD
PRESSURE (x 1,000 lbs)
3,800
3,300
1,700
1,200
MAX.OD
(inches)
27.530
14.500
9.500
HANGER WILLRUN THROUGH
30" x 1" Wall Pipe
16" x 109 lb/ft. Csg.
10 3/4" x 60.7 lb/ft. Csg.
MIN. ID(inches)
26.470
14.990
9.928
6.802
MAX.BIT
SIZE(inches)
26
143/4
97/8
63/4
30" x 16" x 103/4" x 7 5/8" (or 7") Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
MIN.RETURN
AREA (sq in)
48
12
6
SIZE(inches)
24
24 x 16
16 x 103/4
103/4 x 75/8
TYPEHANGER
SH
SH
SP
INTERNALYIELD
PRESSURE(psi)
5,000
12,000
15,000
TENSIONYIELD
PRESSURE (x 1,000 lbs)
3,300
3,300
1,700
1,200
MAX.OD
(inches)
21.125
14.500
9.500
HANGER WILLRUN THROUGH
211/4" BOP
16" x 109 lb/ft. Csg.
10 3/4" x 60.7 lb/ft. Csg.
MIN. ID(inches)
22.240
13.802
9.928
6.802
MAX.BIT
SIZE(inches)
22
133/4
97/8
63/4
24" x 16 "x 103/4" x 7 5/8" Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
MIN.RETURN
AREA(sq in)
24
12
6
30
30 x 20
20 x 133/8
133/8 x 95/8
95/8 x 7 (32-38 lb)
SIZE(inches)
SH
SH
SP
SP
TYPEHANGER
5,000
10,000
16,500
17,500
INTERNALYIELD
PRESSURE(psi)
3,800
3,800
2,400
2,000
700
TENSIONYIELD
PRESSURE (x 1,000 lbs)
27.250
18.510
12.188
8.375
MAX.OD
(inches)
48
13
10
5
MIN.RETURN
AREA (sq in)
30 x 1" Wall Pipe
20" x 133 lb/ft. Csg.
133/8" x 72 lb/ft. Csg.
95/8" x 53.5 lb/ ft. Csg.
HANGER WILLRUN THROUGH
26.250
17.553
12.490
8.803
5.905
MIN. ID(inches)
26
171/2
121/4
83/4
57/8
MAX.BIT
SIZE(inches)
30" x 20" x 133/8" x 95/8" x 7 " Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
30
30 x 133/8
133/8 x 95/8
95/8 x 7 (32-38 lb)
SIZE(inches)
SH
SP
SP
TYPEHANGER
9,700
16,500
17,500
INTERNALYIELD
PRESSURE(psi)
2,900
2,900
2,000
900
TENSIONYIELD
PRESSURE (x 1,000 lbs)
21.125
12.188
8.375
MAX.OD
(inches)
28
10
5
MIN.RETURN
AREA(sq in)
211/4" BOP
133/8" x 72 lb/ft. Csg.
95/8" x 53.5 lb/ft. Csg.
HANGER WILLRUN THROUGH
20.125
12.490
8.803
5.905
MIN. ID(inches)
20
121/4
83/4
57/8
MAX.BIT
SIZE(inches)
30" x 133/8" x 95/8" x 7" Casing Program (211/4 " BOP)
SH Indicates shoulder type hanger SP Indicates split ring type hanger
MS-15 StrengthS and diMenSionS
-
36
36 x 24
24 x 185/8
185/8 x 133/8
133/8 x 9 5/8
95/8 x 7 (32-38 lb)
SIZE(inches)
SH
SP
SP
SP
SP
TYPEHANGER
5,000
7,500
11,000
16,500
17,500
INTERNALYIELD
PRESSURE(psi)
5,000
5,000
4,500
3,000
2,000
710
TENSIONYIELD
PRESSURE(x 1,000 lbs)
29.250
22.000
17.000
12.188
8.375
MAX.OD
(inches)
48
15
12
10
5
MIN.RETURN
AREA(sq in)
291/2" BOP
243/4" Wall Pipe
185/8" x 136 lb/ft. Csg.
133/8" x 72 lb/ft. Csg.
95/8" x 53.5 lb/ ft. Csg.
HANGER WILLRUN THROUGH
28.250
22.240
17.553
12.490
8.803
5.905
MIN. ID(inches)
28
22
171/2
121/4
83/4
57/8
MAX.BIT
SIZE(inches)
36" x 24" x 185/8" x 133/8" x 95/8" x 7 " Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
36
36 x 36
26 x 20
20 x 133/8
133/8 x 95/8
95/8 x 7(32-38 lb)
SIZE(inches)
SH
SP
SP
SP
SP
TYPEHANGER
3,000
5,000
10,000
16,500
17,500
INTERNALYIELD
PRESSURE(psi)
4,500
3,700
3,500
3,000
2,250
910
TENSIONYIELD
PRESSURE(x 1,000 lbs)
29.250
24.000
17.446
12.188
8.375
MAX.OD
(inches)
291/2" BOP
26" x .812" Wall Pipe
20" x 1.00" Wall Pipe
133/8" x 72 lb/ft. Csg.
95/8" x 53.5 lb/ft. Csg.
HANGER WILLRUN THROUGH
28.250
24.125
17.553
12.490
8.803
5.905
MIN. ID(inches)
28
24
171/2
121/4
83/4
57/8
MAX.BIT
SIZE(inches)
36" x 26" x 20"x 133/8" x 95/8" x 7 " Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
22
28
13
13
5
MIN.RETURN
AREA (sq in)
SIZE(inches)
30
30 x 16
16 x 103/4
103/4 x 75/8
TYPEHANGER
SH
SP
SP
INTERNALYIELD
PRESSURE(psi)
5,000
12,000
15,000
TENSIONYIELD
PRESSURE (x 1,000 lbs)
3,800
3,300
1,700
1,200
MAX.OD
(inches)
27.530
14.500
9.500
HANGER WILLRUN THROUGH
30" x 1" Wall Pipe
16" x 109 lb/ft. Csg.
10 3/4" x 60.7 lb/ft. Csg.
MIN. ID(inches)
26.470
14.990
9.928
6.802
MAX.BIT
SIZE(inches)
26
143/4
97/8
63/4
30" x 16" x 103/4" x 7 5/8" (or 7") Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
MIN.RETURN
AREA (sq in)
48
12
6
17
36
36 x 24
24 x 185/8
185/8 x 133/8
133/8 x 9 5/8
95/8 x 7 (32-38 lb)
SIZE(inches)
SH
SP
SP
SP
SP
TYPEHANGER
5,000
7,500
11,000
16,500
17,500
INTERNALYIELD
PRESSURE(psi)
5,000
5,000
4,500
3,000
2,000
710
TENSIONYIELD
PRESSURE(x 1,000 lbs)
29.250
22.000
17.000
12.188
8.375
MAX.OD
(inches)
48
15
12
10
5
MIN.RETURN
AREA(sq in)
291/2" BOP
243/4" Wall Pipe
185/8" x 136 lb/ft. Csg.
133/8" x 72 lb/ft. Csg.
95/8" x 53.5 lb/ ft. Csg.
HANGER WILLRUN THROUGH
28.250
22.240
17.553
12.490
8.803
5.905
MIN. ID(inches)
28
22
171/2
121/4
83/4
57/8
MAX.BIT
SIZE(inches)
36" x 24" x 185/8" x 133/8" x 95/8" x 7 " Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
36
36 x 36
26 x 20
20 x 133/8
133/8 x 95/8
95/8 x 7(32-38 lb)
SIZE(inches)
SH
SP
SP
SP
SP
TYPEHANGER
3,000
5,000
10,000
16,500
17,500
INTERNALYIELD
PRESSURE(psi)
4,500
3,700
3,500
3,000
2,250
910
TENSIONYIELD
PRESSURE(x 1,000 lbs)
29.250
24.000
17.446
12.188
8.375
MAX.OD
(inches)
291/2" BOP
26" x .812" Wall Pipe
20" x 1.00" Wall Pipe
133/8" x 72 lb/ft. Csg.
95/8" x 53.5 lb/ft. Csg.
HANGER WILLRUN THROUGH
28.250
24.125
17.553
12.490
8.803
5.905
MIN. ID(inches)
28
24
171/2
121/4
83/4
57/8
MAX.BIT
SIZE(inches)
36" x 26" x 20"x 133/8" x 95/8" x 7 " Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
22
28
13
13
5
MIN.RETURN
AREA (sq in)
SIZE(inches)
30
30 x 16
16 x 103/4
103/4 x 75/8
TYPEHANGER
SH
SP
SP
INTERNALYIELD
PRESSURE(psi)
5,000
12,000
15,000
TENSIONYIELD
PRESSURE (x 1,000 lbs)
3,800
3,300
1,700
1,200
MAX.OD
(inches)
27.530
14.500
9.500
HANGER WILLRUN THROUGH
30" x 1" Wall Pipe
16" x 109 lb/ft. Csg.
10 3/4" x 60.7 lb/ft. Csg.
MIN. ID(inches)
26.470
14.990
9.928
6.802
MAX.BIT
SIZE(inches)
26
143/4
97/8
63/4
30" x 16" x 103/4" x 7 5/8" (or 7") Casing Program
SH Indicates shoulder type hanger SP Indicates split ring type hanger
MIN.RETURN
AREA (sq in)
48
12
6
-
DRIL-QUIP, INC.OFFSHORE DRILLING AND PRODUCTION EQUIPMENT
DRIL-QUIP, INC.OFFSHORE DRILLING AND PRODUCTION EQUIPMENT
www.dril-quip.com 2011 Dril-Quip, inc. Printed in the USA 100412F
DRIL-QUIP WESTERN HEMISPHERE DRIL-QUIP, INC. World Headquarters6401 North Eldridge Pkwy.Houston, Texas 77041Tel (713) 939 7711Fax (713) 939 8063
DRIL-QUIP do Brasil, LTDA.Maca, BrazilTel (55) 22 2791 8950Fax (55) 22 2791 8989
DRIL-QUIP New OrleansNew Orleans, LouisianaTel (504) 522 5566Fax (504) 522 4426
DRIL-QUIP ASIA PACIFICDRIL-QUIP Asia Pacic Pte. Ltd.No. 80 Tuas West DriveSingapore, 638417Tel (65) 6861 0600Fax (65) 6861 5700DRIL-QUIP ChinaShekou, P. R. ChinaTel (86) 75 5268 97137Fax (86) 75 5268 97134
DRIL-QUIP Oileld Services(Tianjin) Co., Ltd.Tanggu, Tianjin, P. R. ChinaTel (86) 22 2580 7466Fax (86) 22 2580 7130
DRIL-QUIP MalaysiaKuala Lumpur, MalaysiaTel (60) 3 2168 4308Fax (60) 3 2168 4201
D.Q. Holdings Pty., Ltd.Perth, AustraliaTel (61) 8 9322 8600Fax (61) 8 9322 8500
DRIL-QUIP QatarDoha, QatarTel (974) 44389715Fax (974) 44417041
DRIL-QUIP IndonesiaJakarta, IndonesiaTel (62) 21 720 0612Fax (62) 21 720 1513
DRIL-QUIP Egypt Zahraa El-Maadi, Cairo, EgyptTel (20) 22 753 8809Fax (20) 22 753 8907
Alexandria, EgyptTel (20) 3 450 0507Fax (20) 3 450 0508
DRIL-QUIP Nigeria, Ltd.Port Harcourt, NigeriaTel (234) 84 463866Fax (234) 84 463649
DRIL-QUIP (Ghana) Ltd.Takoradi, GhanaTel: (233) 312 5384
DRIL-QUIP EASTERN HEMISPHEREDRIL-QUIP (Europe), Ltd.Stoneywood Park, DyceAberdeen, Scotland, UK AB21 7DZTel (44) 1224 727000Fax (44) 1224 727070DRIL-QUIP LondonHigh Wycombe, Bucks, EnglandTel (44) 1494 601086Fax (44) 1494 601094
DRIL-QUIP NorwayStavanger, NorwayTel (47) 51 443700Fax (47) 51 443701
DRIL-QUIP The NetherlandsBeverwijk, The NetherlandsTel (31) 251 22 9250Fax (31) 251 22 0044
DRIL-QUIP DenmarkEsbjerg, DenmarkTel (45) 7518 0944Fax (45) 7518 0640