DREAMBOX DM800HD MOTOR SETUP

Hi i have Gemeni image install in my box.here is some information how to 

setup ur box with motorized dish (diseqc 1.2)

First Go to:

Menu--------->Setup------>service searching--->tuner configuration--->Advanced

then choose any setllite you want example we select Hotbird 13 east

Advanced---->hotbird

LNB--->1

USE USALS----NO

Store --->001

diseqc-----1.2

-----------------------------------only change these setting pls dont change any other setting then press ok then exit 

same you can did other setllites setting but everytime you add other setllite please select LNB2 AND Store :002 and if you add more settllites pls give them LNB3....AND store :3

then go to Positioner Tuner setup

MENU--->-->Setup------>service searching-->Tuner positioner---->Tuner--select setllite Example 

Tuner positioner---->Tuner--Hotbird13east

store postion---->1

then move your your dish east by pressing green button when you get Hotbird signal and say locaked just press green button to store setting.then exit

Now search your Hotbird 13east by Manual scan and do the same for other setllites just Change store number 1.2.3.4.5. remember all setllites store with different numbers hope this method will work for you.

STAGE 1.Setting up a DM800 none usalsGOTO Main Menu \ Setup \ Service Searching \ TuningPress "OK" on "TUNER A"

Use L/R keys to change Configuration Mode to "advanced"Move down to "SATELLITE"Use L/R keys to select the satellite you want to add

Go down to "LNB"Use L/R keys to select "LNB 1"Next ensure "Diseqc Mode" is " 1.2"(I left the others at the default setting's)Scroll further down to "LOF" and set it to "Universal LNB" using the L/R keys

Underneath that set "Use USALS" for this satellite to "no" using L/R keysGo down to "Stored position"Set the position you want to for this satellite to appear at using L/R keys ie 001, 002 etc and press okThen Press "OK" to save the info you have inputted.You will need to perform this for each Satellite position you intend to set up. Before you got to positioner setup.

STAGE 2.GOTO back to Main Menu \ Setup \ Service Searching \ Positioner SatfinderGo down to "Satfinder"Press ok on Satfinder next pictureUsing L/R keys select "Predefined or Manual transponder" as requiredGo down to "Satellite" and use the L/R keys to select the Satellite to place at the above Storage postionPress "OK"When you have a lock exit this screenGOTO back to Main Menu \ Setup \ Service Searching \ Positioner setupPress ok on positioner setup next pictureGo up to "Tune"Press the "Red Button"Select the satellite that you had a lock on, change the transponder so it was the same as in the satfinder pictureGo down to "Positioner storage"

Use L/R keys to set the postion number that is to be setupPress the GREEN button to store that location

After you have stored this position got back to satfind and change the satellite to the next one you want to view, when you have a lock on this satellite exit again and proceed with the satellite positioner again .

You will need to perform this for each position you intend to set up in line with what you did in stage 1