Download - Wal Mart Project mini
-
7/28/2019 Wal Mart Project mini
1/43
1
-
7/28/2019 Wal Mart Project mini
2/43
2
A Project on
Wal-MartSupply Chain Management
ATALLANA INSTITUTE OF MANAGEMENT SCIENCES
SUBMITTED IN THE PARTIALFULFILLMENT FOR
THE MASTER OF BUSINESSADMINISTRATION
BySana javed mujawar
Mba-i
-
7/28/2019 Wal Mart Project mini
3/43
3
ACKNOWLEDGEMENT
I acknowledge with immense pleasure to present my views on the current
Hot provoking topic in India i.e WALMART, The only largest fortune which
Directly serves the COMMAN MAN across the globe.
It is privilege for me to express my profound & sincere gratitude to my
Project guide Mrs. Mukta for her constant guidance & valuable assistance
& inspiration throughout the course of the work without which it have
been difficult for me to pursue the project.
I would also like to thank all others who directly or indirectly helped
complete my project.
-
7/28/2019 Wal Mart Project mini
4/43
4
INDEX
1.CHAPTER
Introduction
1.1Objective of the study
1.2Scope
1.3Assumptions
1.4Limitation
1.5Methods of data collection
2.CHAPTER
Company Profile
3.CHAPTER
Review Of Literature
-
7/28/2019 Wal Mart Project mini
5/43
5
CHAPTER 1
INTRODUCTION
1.1 OBJECTIVE OF THE STUDY1.The main objective was to study about the Wal Mart retail stores.
2.The secondary objective was to know about the retail sector of India.
3.To know how the company offers verious innovative and successful product to
the customers.
4.To know the stringent quality control system for consistent quality.
5.To know about the Supply Chain Management of Wal Mart.
-
7/28/2019 Wal Mart Project mini
6/43
6
1.2 SCOPE
The various components of Supply Chain are: Procurement, Distribution,
Logistics and Inventory Management.Since the core of Wal-Mart business is perpetual improvement in its Supply
Chain implementation, it believes in no-compromise on implementing an
innovative IT infrastructure and strong communication system as they are
they the important links in the chain for a smooth functioning of the complete
system.
Wal-Mart tapped RFID technology with an aim to increase the efficiency of its
supply chain. This is because RFID implementation will enhance transparencyof their supply chain and hence will help them minimize cost and labor and
will strengthen inventory control. According to Venture Development
Corporation,
-
7/28/2019 Wal Mart Project mini
7/43
7
1.3 ASSUMPTION1.The information gathered from secondary sources is assumed to be true.
2.The selection of Wal Mart Company for Supply Chain Management is assumed
to be right.
3. The mental capabalities of the researcher for the topic is assumed to be
enough.
-
7/28/2019 Wal Mart Project mini
8/43
8
1.4 LIMITATION
1. There was time constraint.
2. The data available on the website was not convenient to provide
required information.
3. The information provided from the other sources was also limited.
4. Cost Expensive Machanism.
-
7/28/2019 Wal Mart Project mini
9/43
9
1.5 METHODOLOGY( Method of collection )
1. Primary Dataa. Company website
2. Secondary Dataa. News Papers
b.
Internet
-
7/28/2019 Wal Mart Project mini
10/43
10
CHAPTER 2
COMPANY PROFIL
Introduction
Technology is inevitable in every sphere of life today; it has always made
things easier. Wal-Mart works on the same strategy, from the above
description; we can understand how diversified Wal-Mart is and the volume
of cargo it needs to handle for each of its businesss. Traditionally, it hadstarted with computerization of individual stores with small billing machines
and had then led to centralized billing for record keeping. The technology has
grown by leaps and bounds and has become increasingly challenging to
maintain large databases of information and maintain records. Powerful
computers networked with high performance clusters maintain and store this
data. This gives a picture as to how technology plays a vital role in todays
businesses.
Traditionally, technology has been upgraded in billing systems and for storage
purposes. A new area where technology could be applied to, where many
expenses could be saved was in inventory management and logistics. Wal-
Mart being so huge, needed to keep track of men and material sent across
different countries and had to maintain hundreds of warehouses across the
world. Bar-codes have been initially identified as a suitable technology to
meet the purpose.
-
7/28/2019 Wal Mart Project mini
11/43
11
But due to the limitations of barcodes, a new emerging technology called RFID
has been identified to meet the demands. RFID is low cost Radio Frequency
Identification system which requires minimum human intervention to carry
out tasks ranging from billing to materials tracking and supply chain
management. It is a small wireless device which can store good amount ofdata and can virtually be tagged to anything.
RFID is an electronic tagging technology as shown in figure 1 that allows an
object, place, or person to be automatically identified at a distance without a
direct line-of-sight, using an electromagnetic challenge/response exchange.
Fig 1: RFID Devices
Why RFID over Bar-Code?
The ability to read without line-of-sight is the best advantage of RFID over
bar-code systems. RFID readers can sense items even when the tagged items
are hidden behind other tagged items. This enables automation. The
challenging part of implementing RFID is that tagged items should not be
missed by the reader due to interference, multipath fading, transient effects
-
7/28/2019 Wal Mart Project mini
12/43
12
etc. Missed reads are an unfortunate reality with RFID systems. RFID uses a
serialized numbering scheme such as EPC (Electronic Product Code). Each tag
has a unique serial number. Serial number information is extremely powerful
in understanding and controlling the supply chain and provides much more
detailed behavior of the supply chain than can non-serialized bar codes suchas UPC (Universal Product Codes) and EAN (European Article Numbering).
Serial numbers have many advantages such as food freshness/expiration. This
can tell how for how long an item has been in the supply chain where as such
information is not captured in bar code system. Hence items can be reached
the right place at the right time. Furthermore RFID implementation monitors
theft too. For example if number of items reached at the retailers outlet is less
than that was departed from suppliers location, it can be easily tracked for. In
all these ways, RFID systems have stronger sensor networking system ormonitoring system than bar code systems.
RFID Infrastructure
Many software systems used in enterprise systems today are not designed to
handle serial numbers as required by the RFID systems. The problem in
synchronizing RFID systems to software system can be best described as the
problem in synchronizing a speaker to a hi-fi amplifier. If the hi-fi amplifier is
not synchronized to speaker there will be distortion in sound signal. Like wise
there will be mismatch in capabilities and requirements if RFID system is not
synchronized with enterprise software properly. A solution to this problem is
to introduce a layer between RFID readers and the application software
commonly known as RFID middleware. It has two levels of functionality: a
lower level device and data management and a higher level interpretation
level.
-
7/28/2019 Wal Mart Project mini
13/43
13
Data management layer provides some functionality of filtering of data due to
intermittent appearances and disappearances. This can be achieved by setting
some time threshold levels. For example you could tell the software to record
tags as missing only after they have not been seen for a certain number of
seconds. This is important because if the reader cannot read certain tags dueto interference of certain objects, the software should not conclude that the
tagged item is being sold or stolen. This mechanism would reduce false reads.
Device management is one of the most challenging part of RFID
implementation. RFID readers interact with other devices such as motionsensors, programmable logic arrays and human interfaces. RFID readers
operate in ISM (Industrial, Scientific and medical) bands at 13.56 megahertz,
915 megahertz and 2.45 megahertz. Because implementing RFID is an
extensive ubiquitous task, there is a complication of different bandwidth
standards around the world. For example, Japan has very different bandwidth
standard than U.S.A. Security intrusion is also an issue in RFID deployment
because RFID readers operate automatically unlike bar code scanners which
are operated by humans.
-
7/28/2019 Wal Mart Project mini
14/43
14
Fig 2: Two Levels of Functionality
After the data management layer yields data, the data interpretation layer
must extract inference from such data and forward it to the applications that
deploy RFID. This inference mechanism is a very sophisticated task. Forexample if a tagged pallet carrying tagged items out of the door should not be
confused with the one that just passes by the door and does not go outside it.
This high level of reasoning involves a lot of inferences and associations.
Tags can be associated with each other when they are assembled.
Integrating RFID into the enterprise is one task but extracting value for the
enterprise at the systemic level is another challenging task which requires lot
of control and effort.
-
7/28/2019 Wal Mart Project mini
15/43
15
Fig 3: Architecture with Independent EPC Visibility Layer
The EPC visibility layer keeps track of RFID data in many level of detail. The
architecture for such a system can be shown as in figure 2.The enterprise EPC
systems can then be a single source of all EPC data. The enterprise system can
keep a true and multi resolution record of all EPC data permitting different
applications to access EPC data at the appropriate resolution. The Auto-ID
center has developed a software called savant which serves as the edge and
the enterprise software. They also built a prototype of the ONS. EPCglobal
operates ONS. EPCglobal also sell EPC codes to users who want to place EPC
tags on their products. EPCglobal run a number of hardware and software
modules of the EPC system. The EPCglobal system includes a number of
standards for communicating with readers, for middleware of the edge, and
for the edge and enterprise EPC systems. This emergence of EPCglobal system
has changed the way supply chain is operated today.
-
7/28/2019 Wal Mart Project mini
16/43
16
CHAPTER 3REVIEW OF LITERATURE
Introduction to Supply Chain Management
Supply chain management (SCM) is the coordination of a network of facilities
and distribution options that performs procurement of materials, processing
the materials into finished products, and distribution of the products to
customers. SCM is seen as involving five core processes. These include
planning, sourcing, making, delivering, and returning.
Fig 4: Typical supply chain showing interrelations between all involved
parties.
-
7/28/2019 Wal Mart Project mini
17/43
17
SCM exists in both service and manufacturing environments. A typical supply
chain consists of many interactions between suppliers, manufacturers,
distributors, retailers, with the ultimate goal of providing either a service or a
product to customers. This also works in reverse with the customer at the
head of the process when returning a product.
SCM is used as a means to integrate planning, purchasing, manufacturing,
distribution, and marketing organizations that normally do not work together
to achieve a common goal. Each works toward goals specific to their own
organization that accomplish narrow objectives. SCM is a way of integrating
these varying functions so that they work together to maximize the benefits
for all involved.
-
7/28/2019 Wal Mart Project mini
18/43
18
There are three levels of SCM: strategic, tactical, and operational.
Fig 5: Three Levels of SCM
Strategic SCM deals with future planning than in looking at market evaluation,
capacity issues, new products, and technology changes. This planning is
addressing issues that may be factors several years out. This is accomplished
at the executive management level.
Tactical SCM involves a shorter planning cycle. It is more concerned demand
planning, inventory planning, and supply planning. This is determined at a
less senior level than Strategic SCM.
Operational SCM is current planning activities measured in at most weeks.
Operational SCM involves the majority of the operations. It includes demand
fulfillment, scheduling, production, transport, and monitoring.
-
7/28/2019 Wal Mart Project mini
19/43
19
There are many decisions that are made when looking at SCM. They follow
the above categories. Strategic decisions are made over longer periods of time
and linked to a corporations strategy. Operational decisions are more short
term and look at day to day activities. Four major decisions are considered.
The include decisions on location, production, inventory, and transportation.A geographically strategic placement of the production facilities is key to
creating a successful supply chain. Decisions on what products to be
produced have to be made wisely and strategically. Also, where these
products (which locations) will be manufactured is very important to SCM.
Inventory decisions and management is critical. Some inventories are
necessary to hedge against uncertainty, but this comes with a cost. Managing
these inventories efficiently will be of benefit to the corporation.
Transportation decisions include cost versus benefit. Air transportation iscostly, but fast and reliable. Other modes of transportation may be cheaper,
but the sacrifice is having to hold inventories due to delays that may occur. If
the above decisions are made with careful and strategic thought as well as
with concern for integration, the supply chain should be efficient and
successful.
The overall goal of SCM is to optimize supply chains in an attempt to providemore accurate and time sensitive information that can be used to improve
process times and cut costs. Supply chains have been around for decades and
a constantly being improved. The newest opportunity for improvement is the
introduction of radio frequency identification (RFID) tags. RFID technology
will provide real-time information that will allow manufacturers to get better
readings of customers and markets thus further improving supply chains.
RFID will help retailers provide the right products at the right places at the
right times. Ultimately, maximizing sales and profits
-
7/28/2019 Wal Mart Project mini
20/43
20
Wal-Mart has been leading the charge with RFID technology. Having the
largest retailer adopt and begin to use RFID technology has given strong
backing to the technology and will only further and quicken the expansion of
RFID. They have begun requiring all their major suppliers to implement RFID
technology on all products supplied to Wal-Mart.
One example of what Wal-Mart has done with SCM and its suppliers is that of
its relationship with Proctor & Gamble. These two built a software system
that hooked Proctor & Gamble up to Wal-Marts distribution centers. This
system would then monitor supply levels and when products run low,
automatic alerts are sent out to require the shipment of more products to that
distribution center. Wal-Mart has taken this as far as going to the individualstore locations. The shelves are monitored in real time via satellite links that
send inventory messages whenever Proctor & Gamble products are scanned
at a register. This allows Proctor & Gamble to be fully aware of up to the
minute product inventories at the actual store locations and ship additional
products as necessary. This concept is a huge step in making SCM as efficient
as it can be.
Wal-Mart Introduction and its Business Processes
Wal-Mart is one of the largest Fortune 500 companies, which is spread across
the globe. It is an arguably the largest retail chain which deals with everything
from food to consumer electronics. In terms of the revenue generated, it leads
the fortune 500 companies like GE and Microsoft. Simply put, it has everything
a homemaker can ever think of. Affordable price range coupled withaggressive online and market strategy has lead to wide acceptance for Wal-
Mart in towns and cities alike. Wal-Mart is probably the only largest fortune
500 corporations in the world, which directly services the common man.
-
7/28/2019 Wal Mart Project mini
21/43
21
Operations
Wal Mart operations are comprised of three business segments:
Wal-Mart Stores
SAMS CLUB
Wal-Mart International.
Wal-Mart Stores segment is the largest segment, which accounted for
approximately 67.3% of their 2005 fiscal sales. This segment consists of three
different retail formats, all of which are located in the United States. This
includes the following sections:
Super-centers, which average approximately 187,000 square feet in size and
offer a wide variety of products and a full-line supermarket;
Discount Stores, which average approximately 100,000 square feet in size
and offer a wide variety of products and a limited stock of food products; and
Neighborhood Markets, which average approximately 43,000 square feet insize and offer a full-line supermarket and a limited variety of general
merchandise.
SAMS CLUB segment consists of membership warehouse clubs in the United
States which accounted for approximately 13.0% of 2005 fiscal sales. SAMS
CLUBs in the United States average approximately 128,000 square feet in size.
-
7/28/2019 Wal Mart Project mini
22/43
22
Wal-Mart International operations are located in Argentina, Canada, Germany,
South Korea, Puerto Rico and the United Kingdom, the operations of joint
ventures in China and operations of majority-owned subsidiaries in Brazil and
Mexico. This segment generated approximately 19.7% of 2005 fiscal sales.
Here, it operates several different formats of retail stores and restaurants,including Super-centers, Discount Stores and SAMS CLUBs.
For the fiscal year ending January 31, 2005, Wal-Mart topped $10 billion in
net income for the first time in their history and added almost $29 billion in
sales.
Business Model
A Business model is central to any successful business. Wal-mart is no
exception. Wal-mart has always been innovating and improving its business
model to suite its organizational goals and also meet customer requirements,
and so has managed to stay on top year after year. Wal-mart has employed a
mixed-business model for its business for the same.
To understand the Business models used by Wal-Mart, first it is important to
know the factors, which go in defining those models, and how does it relate to
Wal-Mart specifically.
-
7/28/2019 Wal Mart Project mini
23/43
23
Market Strategy of Wal-Mart
Wal-Mart stresses mainly on their Everyday Low prices (EDLP) pricing
philosophy, in which they price items at a low price every day that builds &
maintains customers trust in their pricing. Since they employ both the clicks
and bricks and bricks and mortar methods to market their products,
consumers get to choose their products either the traditional way or online
anytime of the day. Though Wal-Mart has not advertised in Advertising, as
many of its competitors do, the trust people have built on the Wal-Mart brand
has taken them far from their competitors.
Organizational Development
Wal-Mart has restructured its business into two parts to handle specific
organizational needs.
Specialty Division
- Tire & Lube Express
- Wal-Mart Optical
- Wal-Mart Pharmacy
- Wal-Mart Vacations
-
7/28/2019 Wal Mart Project mini
24/43
24
- Wal-Mart's Used Fixture Auctions
- Wal-Mart Alaska Bush Shopper
Retail Division
- Wal-Mart Stores- Super centers- SAM'S CLUBS- Neighborhood Market- International walmart.com
Competitive Advantage
Wal-Mart has been an undisputed leader in offering the markets lowest prices
to consumers. It has always given a price match guarantee, and has
challenged other stores to offer lesser prices and has agrees to reimburse thedifference, the difference of price if any. No other store could meet this and
Wal-Mart has been leading the pack for years.
Market Opportunity
Wal-Mart employs a combination of two Business Models viz.
B2B Single firm network Business Model SAMS CLUB segment of Wal-Mart
supports small businesses. Its main focus in this segment is to create its own
network of trusted partners to coordinate supply chains and provide
exceptional value on brand-name merchandise at Members Only prices.
http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9221&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9220&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9219&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9218&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9217&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9222&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9222&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9222&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9217&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9218&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9219&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9220&catID=-8242http://www.walmartstores.com/wmstore/wmstores/Mainabout.jsp?BV_SessionID=@@@@0435119815.1127931458@@@@&BV_EngineID=cccjaddfdldmdkjcfkfcfkjdgoodglh.0&pagetype=about&template=DisplayAllContents.jsp&categoryOID=-9221&catID=-8242 -
7/28/2019 Wal Mart Project mini
25/43
25
B2C E-Tailer Business Model Wal-Mart uses clicks and bricks methodology
to provide millions of its customers online version of its retail store, where
customers can shop at any hour of the day or night without leaving their homeor office.
Wal-Mart employs Sales revenue model as it is mainly involved in sale of
goods and services.
These two models help Wal-Mart in achieving its business perspectives
related to its firms organizational needs and the second helps in its interaction
with the customer and manages goods and services offered by Wal-Mart to theend users.
Supply Chain Management at Wal-Mart
Supply chain management at Wal-Mart can be described in 3 sections.
Procurement and Distribution
Wal-Marts process of procurement involves reducing its purchasing costs as
far as possible so that it can offer best price to its customers. The company
procures goods directly from the manufacturers, bypassing all intermediaries.
-
7/28/2019 Wal Mart Project mini
26/43
26
Wal-Mart has distribution centers in different geographical places in US. Wal-
Marts own warehouses supplies about 80% of the inventory. Each
distribution centre is divided in different groups depending on the quantity of
goods received. The inventory turnover rate is very high, about once every
week for most of the items. The goods to be used internally in US arrive inpallets & imported goods arrive in re-usable boxes.
The distribution centers ensured steady flow & consistent flow of products.
Managing the center is economical with the large-scale use of sophisticated
technology such as Bar code, hand held computer systems (Magic Wand) and
now, RFID. Every employee has access to the required information regarding
the inventory levels of all the products in the center. They make 2 scans- onefor identifying the pallet, and other to identify the location from where the
stock had to be picked up. Bar codes & RFID are used to label different
products, shelves & bins in the center. The hand held computers guide
employee to the location of the specific product. The quantity of the product
required from the center is entered in the hand held computer, which updates
the information on the main central server. The computers also enabled the
packaging department to get accurate information such as storage, packaging
& shipping, thus saving time in unnecessary paperwork. It also enablessupervisors to monitor their employees closely in order to guide them & give
directions.
This enables Wal-Mart to satisfy customer needs quickly & improve level of
efficiency of distribution center management operations.
Logistics Management
This involves fast & responsive transportation system. More than 7000
company owned trucks services the distribution centers. These dedicated
-
7/28/2019 Wal Mart Project mini
27/43
27
truck fleets enables shipping of goods from distribution centers to the stores
within 2 days and replenish the store shelves twice a week. The drivers hired
are all very experienced & their activities are tracked regularly through
Private Fleet Driver handbook. This allows the drivers to be aware of the
terms & conditions for safe exchange of Wal-Mart property, along with thegeneral code of conduct.
For more efficiency, Wal-Mart uses a logistics technique called Cross
Docking. In this system, finished goods are directly picked up from the
manufacturing site of supplier, sorted out and directly supplied to the
customers. This system reduces handling & storage of finished goods, virtually
eliminating role of distribution centers & stores. Because of cross-dockingthe system shifted from supply chain to demand chain which meant,
instead of retailers pushing the products into the system, the customers
could pull the products, when & where they required.
Inventory Management
Considering the rapid expansion of Wal-Mart stores, it was essential to have a
very good communication system. For this, Wal-Mart set up its own satellite
communication system in 1983. This allowed the management to monitor
each and every activity going on in a particular store at any point of the day
and analyze the course of action taken depending on how the things went.
Wal-Mart ensures that unproductive inventory is as less as possible, byallowing the stores to manage their own stocks, thereby reducing pack sizes
across many categories and timely price markdowns. Wal-Mart makes full use
of its IT infrastructure to make more inventories available in case of items that
customers wanted most, while reducing overall inventory. By making use of
Bar-coding & RFID technologies, different processes like efficient picking,
-
7/28/2019 Wal Mart Project mini
28/43
28
receiving & proper inventory control of the products along with easy packing
and counting of the inventories was ensured.
Wal-Mart owns the Massively Parallel Processor (MPP), largest & the most
sophisticated computer system in private sector, which enables it to easily
track movement of goods & stock levels across all distribution centers and
stores. For emergency backup, it has an extensive contingency plan in place as
well.
Employees use Magic Wand, which is linked to in-store terminals through a
Radio frequency network, to keep track of the inventory in stores, deliveries
and backup merchandise in stock at the distribution centers. The ordermanagement and store replenishment of goods is entirely executed with the
help of computers through Point of Sale (POS) system. Wal-Mart also makes
use of sophisticated algorithm to forecast the quantities of each item to be
delivered, based on inventories in the store. A Centralized inventory database
allows the personnel at the store to find out the level of inventories and
location of each product at a given time. It also shows the location of the
product like distribution center or transit on the truck. When the goods are
unloaded at the store, the inventory system is immediately updated.
RFID in Wal-Mart
Wal-Mart had initiated its plan to employ RFID technology in its supply chain
in June 2003. Subsequently Wal-Mart reinforced its plans and actively
asserted on defining the RFID standards it will be implementing.
-
7/28/2019 Wal Mart Project mini
29/43
29
The specification of the following RFID components was laid out in November
2003.
EPC (Electronic Product Code) specification
Type of Chip that would be installed
The Distribution centers that will accept RFID tagged products
After the defining phase, Wal-Mart specified the RFID requirements to its
suppliers that they should comply with:
EPC: 96-bit with a Global Trade Identification number
TAGS: Should operate in UHF spectrum (868 MHz to 956 MHz)
The TAG will carry the 96-bit serial number and will be field-programmable,
that will allow the suppliers to write serial numbers to the tags while being
applied to the products.
EPC compliant tags in UHF band consists of two main parts:
EPC data format on the chip
Class0 or Class1 communication protocol
Class0 is a factory programmable tag
Class1 provides the capability to the end users to write serial number on it
Wal-Mart planned to implement Class1 Version2, a globally accepted protocol
that incorporates both specification of Class0 and Class1.
-
7/28/2019 Wal Mart Project mini
30/43
30
In addition, Wal-Mart is planning to enhance mobility to its existing RFID tag
readers by implementing RFID-enabled forklift. These readers will have the
capability to read the tags on the pallets and transmit data through the RFID
network, which would help the users to be better informed about the supply-
chain data.
Efficiency in Supply Chain with RFID
The various components of Supply Chain are: Procurement, Distribution,
Logistics and Inventory Management.
Since the core of Wal-Mart business is perpetual improvement in its Supply
Chain implementation, it believes in no-compromise on implementing an
innovative IT infrastructure and strong communication system as they are
they the important links in the chain for a smooth functioning of the complete
system.
Wal-Mart tapped RFID technology with an aim to increase the efficiency of its
supply chain. This is because RFID implementation will enhance transparency
of their supply chain and hence will help them minimize cost and labor and
will strengthen inventory control. According to Venture Development
Corporation,
-
7/28/2019 Wal Mart Project mini
31/43
31
With Wal-Mart selling over $245 billion worth of goods in fiscal
year 2003, a 1% improvement in the out-of-stock issue could
generate nearly $2.5 billion in very profitable sales.
In addition, a study by Cohen at Wharton chalks out the difference between
the existing inventory management and the RFID enabled supply chain.
In current systems, you may know there are 10 items on the
shelf, and that information is compiled in an enterprise planningsoftware system. With RFID, you know there are 10 items, their
age, lot number, and expiration date and warehouse origin. "It's
like knowing there are 1,000 people in a city," says Cohen. "With
RFID, you know their names."
From the above studies it indicates that employing RFID technology will help
in implementing a seamless supply chain and hence yield profits.
The increase in their efficiency is evident from the news article at
Breitbart.com, where it states that implementation of RFID tags in Wal-Marts
inventory has helped boost sales by keeping shelves better stocked. Usage of
RFID has reduced out-of-stock merchandise by 16% at the stores that have
implemented RFID tags for more than a year. The CIO at Wal-Mart stated that,
-
7/28/2019 Wal Mart Project mini
32/43
32
Wal-Mart has been able to restock RFID-tagged items three times
as fast as non-tagged items.
In addition to improving the availability of in-stock merchandise, Wal-Mart
aims to reduce the practice of manually placing the order and has achieved
10% reduction in the case.
The recent studies show that 130 major suppliers ship merchandise to Wal-
Mart distribution centers with about 5.4 million tags. Wal-Mart expects to
increase RFID implementation by adding another 200 suppliers that are
projected to supply to another 1000 stores.
At present, Wal-Mart is at a nascent state of implementing RFID. In addition to
strengthening the Supply Chain, the largest retailer is also looking into
different dimensions where RFID can be helpful. As a pilot test, Wal-Mart is
working on the data collected by RFID to analyze the consumer behavior.
According to Venture Development Corporation, the major implementation
milestones of RFID at Wal-Mart are to expand Regional and domestic
implementation of RFID throughout 2005. These include Regional
Distribution Centers, Grocery Distribution Centers and Sams Club
Distribution Centers in Texas. And, by 2006, Wal-Mart aims to mandate RFID
implementation for all its suppliers.
-
7/28/2019 Wal Mart Project mini
33/43
33
Wal-Mart Suppliers
Some of the major suppliers of Wal-Mart are:
Gillette, Hewlett-Packard, Johnson & Johnson, Kimberly-Clark, Kraft Foods,
Nestle, Purina PetCare Company, Procter & Gamble and Unilever.
Kimberly-Clark
Kimberly Clark is a manufacturer of paper goods products that include
Kleenex, Huggies and Depend. In April 2004, Kimberly Clark tagged its Scott
paper towels shipment with RFID tags to be shipped to Sanger, Texas.
Kraft Foods
Kraft Foods, the largest food company employs RFID system to improve
handling of its bulk containers. Kraft has outsourced its RFID system to
TrenStar to handle the complete supply chain.
Gillette
Smart razor blades have been introduced to the supermarkets. Gillette has
ordered half a billion tags to track razors. The Gillette Company uses RFID for
both pallet and case applications. All the cases in a pallet are scanned with
RFID readers as they move along the conveyor belt. In a trial at Tesco's new
market Road branch in Cambridge, the packaging of Gillette Mach3 razor
blades has been fitted with tiny chips.
-
7/28/2019 Wal Mart Project mini
34/43
34
Current Usage of RFID
RFID technology is rapidly evolving and growing, providing solutions to a
wide array of problems. Many companies are finding value in implementing
RFID systems today especially when it is applied to solve more realistic supply
chain problems. The key factor, as with any new technology, is to understand
the capabilities of RFID and evaluate how it can be useful to our operations
today. Though RFID deployment is still not full fledged, it is clear that its
deployment is an attainable future goal. The value, which is the most
important metric for a RFID application, is determined by considering the
following key factors:
Basic asset and inventory visibility needs, Speed, range and reliability needed
to track the target product ROI (Return On Investment) in the context of
scope for improvements
RFID in Military
The U.S. military has also been heavily involved in SCM. The militarys main
focus is on getting equipment and necessities to the servicemen and
servicewomen who are on the battlefield. This is quite different from most
businesses that often lose sight of the end customer in the process.
-
7/28/2019 Wal Mart Project mini
35/43
35
In a memo issued back in 2003 by the Acting Under Secretary of Defense that
said, The Department of Defense will be an early adopter of innovative RFID
technologies that leverages the Electronic Product Code (EPC) and compatible
tags. Our policy will require suppliers to put passive RFID tags on lowest
possible piece part/case/pallet packaging by January 2005. We also plan torequire RFID tags on key high-value items. The goal of the military is to
improve data quality, item management, asset visibility, and maintenance.
The DOD has done a good job at meeting this goal. They continue to be on the
cutting edge in advances in military logistics using RFID and SCM.
The Army has experimented with a concept called anticipatory logistics.
Anticipatory logistics is quite similar to the corporate worlds SCM. They bothconsist of seven main components. These are suppliers, procurement,
manufacturing, order management, transportation, warehousing, and
customers. Anticipatory logistics is in an attempt to use technologies,
information systems, and procedures to predict and prioritize needs and
provide supplies in a timely manner. The military approach to SCM is only
slightly different than that of the commercial industry. The military focuses
on mission requirements as opposed to profit and loss statements, which are
what drives a corporation.
According to a benchmark initiative by Deloitte & Touche, only seven percent
of companies are effectively managing their supply chains. The interesting
fact is these companies are seventy three percent more profitable than other
manufacturers. This lends to the belief that proper SCM is beneficial to a
companys bottom line. Efficient SCM is difficult to implement and is being
widely studied. Companies must find the right balance between inventory,transportation and manufacturing costs. If this is done properly, SCM will be
successful and the company will likely receive the rewards by way of
increased profitability.
-
7/28/2019 Wal Mart Project mini
36/43
36
Successful RFID Implementation in different Industries
Volkswagen
Volkswagen, Europe's largest automaker and the fourth largest auto
manufacturer in the world are deploying RFID technology to speed up vehicle
pickup and improve customer service. The system is used to quickly locate a
car in the holding lot, which has over 10,000 automobiles, and to track the
vehicles' progress through a pre-delivery system.
After the production line, every vehicle is equipped with an i-Q8 tag, an active
tag that contains a unique identification number and pre-delivery tasks. The
vehicle is then delivered to the holding lot. An Intelligent Long Range (ILR) -
enabled van with an RFID reader identifies the targeted vehicle when
approaching the car. After the pre-delivery tasks are completed, the status is
written to the active tag.
After deploying active RFID solution, Volkswagen claims to have witnessed
the benefit of significant reduction of the vehicle delivery time and
productivity has been improved by as much as four times. The solution also
provides additional benefits such as improving quality control, electronic
work-in-process tracking, and automatic status update.
Supermarket tries out smart tagging
The electronic radio tags will allow staff and customers to keep track of the
goods in the store. They will also help prevent shoplifting, tracking the itemsfrom the shelf to the till and out of the door. British supermarket chain Tesco
has started to install smart shelves that can track items as they are placed or
removed. If the product goes through the door without being paid for an
alarm is set off.
-
7/28/2019 Wal Mart Project mini
37/43
37
Sun Microsystems sets up RFID test centre in Scotland
Sun maintains that RFID tags have the potential to cut huge costs from the
supply chain of retailers and manufacturers and said the European centre willhelp firms with the tagging of products, integrating the information into back-
end systems and sharing it with their supply chain partners.
I.B.M. Expands Efforts to Promote Radio Tags to Track Goods
IBMs move into the RFID tag printer business with an RFID-capable printer
designed to help customer reduce costs and improve operational efficiencies.
Also I.B.M. consultants began selling advice on consumer privacy issues
related to the use of radio identification tagging of consumer goods.
Texas Instruments
Texas Instruments deploy RFID in the field of logistics/supply chain
management. TI-RFID technology connects all phases of the supply chain,
from resourcing and manufacturing to inventory and distribution. RFID
creates real time information links that speed production, improve quality
and streamline delivery.
EPC global Network
The EPC global Network uses RFID to enable true visibility of objects in the
supply chain. The network has five fundamental elements:The Electronic Product Code (EPC) is a unique number that identifies an item
in the supply chain, whether that is an individual product or a case, or pallet,
of many products being shipped.
-
7/28/2019 Wal Mart Project mini
38/43
38
Each silicon chip of each RFID tag is encoded with a unique EPC that identifies
the product. The silicon chip is wired to an antenna, and, using radio
frequency identification technology, each tag communicates to an RFID reader
its EPC.
The Object Name Service (ONS) collects the EPC that is passed on from the
reader. The ONS resides on a computer or local application system. It tells the
computer systems where to locate information on the network about the item
whos EPC it has just encountered. This information will typica lly reside on
the Internet, making it readily available on a worldwide level.
Physical Markup Language (PML) is an XML-based language that is used to
define data on objects.
Savant is the middleware technology that coordinates the movement of
information over the computer systems.
Limitations and Challenges of RFID
Many issues still exist about the implementation of RFID that even Wal-Mart
may have trouble addressing despite their decision to move forward with the
new technology.
Current challenges in RFID implementation are:
Global standards: A single global RFID standard is highly unlikely toevolve. Like barcodes, standards for RFID will probably varybetween many regions of the world. Multinationals like Wal-Martmay need to implement a variety of RFID standards and technologiesacross their global organizations.
Technology problems: Problems such as signal distortion, readeraccuracy and speed, and tag transmission capabilities persist makingRFID still not practical for widespread use. Some of the majortechnical limitations are:
-
7/28/2019 Wal Mart Project mini
39/43
39
1. Read-range distances are not sufficient to allow for consumersurveillance: Most of the RFID tags currently in use have readranges of fewer than 5 feet. The read range of the RFID tagsdepends on the antenna size, transmission frequency, and
whether they are passive or active.2. Limited information contained on tags: Although some
researchers on RFID support this aspect of the technology bypointing out that the tags associated with most consumerproducts will contain only a serial number. However, this numbercan reveal a lot of information, which is generally used as areference number that corresponds to information contained onone or more Internet-connected databases. This means that thedata associated with that number is theoretically unlimited, andcan be augmented as new information is collected.
3. Defective and poorly performing RFID tags: RFID tagmanufacturers continue to produce faulty tags. Failure rates inearly RFID pilots have been as high as 30%. Unfortunately,"relatively high reliability" is unacceptable if an RFID mandatecalls for a 100% read rate.
4. Damaged RFID tags: Since tag reading happens automaticallywithout line of sight and no human interaction, it can be difficultto know when certain tags are not read. This becomes a seriousissue for business applications built around RFID if 100% read
rates are implicit as part of the core business application design.
Data management: Lack of development of right informationmanagement tools to manage the data effectively, is making it difficult torealize the full potential of RFID in generating a wealth of information.Companies planning to adopt RFID face technical concerns related toeffective data capture (or reading), and to data volume (in databasemanagement and transmission).
Cost: Any developing technology is associated with high costs and so isRFID, which is highly expensive to implement. Individual tags costabout 30 cents each; this will drop to between one and five cents per tagonce billions are being produced . And depending on functionality, tagreaders can cost anywhere from several hundred to several hundredthousand dollars. The largest cost issues, however, reside in therequired size of the databases, their integration with a companys
-
7/28/2019 Wal Mart Project mini
40/43
40
current systems and the effective transmission of information.Associated costs can approach the millions of dollars, but they areunavoidable if the full benefits of RFID are to be realized.
Industry Standards: Many privacy advocates are insisting the
companies to state their intended use of the technologydue to lack ofindustry standards regarding the use of personal information that couldbe encoded on the chips.
Privacy and civil liberties: One major confrontation for RFIDtechnology would be to deal with the threats to consumer privacy andcivil liberties. RFID tags can be embedded into/onto objects anddocuments without the knowledge of the individual who obtains thoseitems.
Must be programmed, applied and verified individually, and datasynchronization is usually required.
A final barrier to implementation that may need managing is employeeacceptance, particularly in light of potential job losses.
RFID Practices that should be prohibited:
Merchants must not force their customers into accepting RFID tags inthe products they buy.
RFID must not be used to track individuals absent informed and writtenconsent of the data subject. Human tracking is inappropriate, either
directly or indirectly, through clothing, consumer goods, or other items. RFID should never be employed in a fashion to eliminate or reduce
anonymity. For instance, RFID should not be incorporated into currency.
What Should Wal-Mart Do?
Wal-Mart should redefine the scope of its RFID mandate by narrowing thescope of products to those with limited amounts of metal and liquid. Supplierswould not be affected with a narrower focus on high-priced products likeprescription drugs, apparel, and DVDs etc. It gives additional time for vendors
and suppliers to perfect tag reliability for all products. Forresterrecommends that Wal-Mart use its influence to help create a buyingconsortium, giving suppliers the collective power to cut tag costs.
-
7/28/2019 Wal Mart Project mini
41/43
41
What Should Suppliers Do?
Suppliers should use their initial knowledge to shape mandates by Wal-Martand other retailers. In addition to addressing the challenges they are facing inimplementing RFID with Wal-Mart, suppliers should create an internal RFIDlead position with direct access to the CEO.
Future of RFID
Fig 6: State of RFID technology deployment[Source: AMR Research, 2005]
Future Applications
- In the pharmaceutical industry, RFID tags on drug bottles are beingused as anti-counterfeiting devices.
- Pet owners have begun implanting their cats and dogs with RFID chipsto locate them should they become lost.
- In libraries, books are being tagged for self-automated checkout, freeingup librarians to perform other tasks. This also allows a librarian toeasily locate a book misplaced on the wrong shelf.
-
7/28/2019 Wal Mart Project mini
42/43
42
- The USDA is pushing to give every cow in the United States its ownunique identification number, making it easier to track diseases, such asmad cow disease, back to the originating farm.
- It has been acknowledged that RFID technology can be used for
marketing purposes or even, in a Brave New World scenario,government tracking of its citizens. For instance, it is possible toubiquitously embed the chip within a product, for instance a pair ofjeans or a set of automobile tires. What is most frightening, however, isthe ability to implant an RFID chip under the human skin.
The future of RFID is uncertain. There has been a mixed reaction from the
various suppliers and customers who already deployed RFID into theirindustry. Industry analysts are unanimous on the view that RFID is going todominate the industry soon. RFID technology will reach the zenith by the endof 2006 and from a retailers perspective the technology will bring arevolution, key retailers such as Tesco and, in particular, Wal-Mart of the USare pushing ahead with the technology that will end up affecting thousandsof suppliers. So too is the US Department of Defense. It will be widely used inretail and consumer goods, automotive, healthcare, military, postaldepartment and other scientific use but if consumers really don't like the
idea if it's too confusing for them, too much technology or their privacyconcerns are too strong will the technology survive is the question to beanswered.
Two things are clear when it comes to RFID. First off, there has been no clearroadmap that a company can employ while evaluating RFID opportunities ormandates. The typical approach has been one of trial and error. Secondly, thefuture of RFID is going to be determined more by the dominant applicationsrather than by the technology. Many see RFID as a technology in its infancywith an untapped potential. While we may talk of its existence and theamazing ways in which this technology can be put to use, until there are morestandards set within the industry and the cost of RFID technology comesdown we won't see RFID systems reaching near their full potential anytimesoon.
-
7/28/2019 Wal Mart Project mini
43/43
Researchers have concluded that organizations should keep initial RFIDprojects at a simpler scale. This might include single stage implementation,such as tracking cases or pallets within warehouses, or from warehouse tostore, or acting as bar-code replacements 9. Before any organization can
seriously contemplate using RFID to support its operations, it should have afirm understanding of the benefits that the technology can provide. This levelof understanding and experience will be necessary before moving to morecomplicated supply chain implementations in making RFID a big success.RFID learning curve is a long process and starting with small projects andthen establishing standards for efficient future product movement caneffectively implement it.
As the old saying goes, "the early bird catches the worm." Even if the truebenefits will not be realized for several years, establishing the base RFID
infrastructure today is the key driver for total supply chain adoption andbenefit realization tomorrow10.