WAGO Full Line Catalogs
Volume 1, Rail-Mounted Terminal Block Systems
Volume 2, Connectors and PCB Terminal Blocks
Volume 5, WINSTA® – The Connection System
Volume 3, AUTOMATION
Volume 4, INTERFACE ELECTRONIC
Rail-Mounted Terminal Blocks
Modular Connectors (X-COM®-SYSTEM and X-COM®-SYSTEM)Patchboard SystemsTerminal StripsPUSH WIRE® Connectors for Junction BoxesLighting ConnectorsShield Connecting System
PCB Terminal BlocksFeedthrough Terminal BlocksMULTI CONNECTION SYSTEM
Pluggable PCB ConnectorsSpecialty Connectors
TO-PASS® Telecontrol TechnologyPERSPECTO®
Relays – Optocouplers – Special FunctionsInterface ModulesTransducers
Overvoltage ProtectionWireless TechnologyEmpty Housings and Mounting Carriers
WINSTA® MINI – ConnectorsWINSTA® MINI special – ConnectorsWINSTA® MIDI – ConnectorsWINSTA® MIDI special – ConnectorsWINSTA® MAXI – ConnectorsWINSTA® RD – Cable AssembliesWINSTA® KNX – ConnectorsWINSTA® IDC – Flat Cables
1 2
!
"
'
%
$
Operation of WAGO Connection Technologies*
The universal connection for solid, stranded and fine-stranded conductors
Handling:- Open clamping unit- Insert the conductor- Release clamp – done!
The universal connectionwith “@PECIAL”
Handling:- Open clamping unit- Insert the conductor- Release clamp – done!- Terminate both solid and ferruled conductors by simply push-
PUSH WIRE® connection for solid and stranded conductors (depending on model used)
Handling:
Insulation Displacement Connection (IDC)
Handling:Push unstripped conductor into the IDC contact using an operat-
The universal connection for conductors larger than 6 AWG (16 mm2)
Handling:
24 – 93
94 – 139
1
2
3
4
5
6
7
1 3
CONTENTSRail-Mounted Terminal Block SystemsThrough Terminal Blocks, Double- and Triple-Deck Terminal Blocks, Ground Terminal Blocks, Ex Terminal Blocks, High-Current Terminal Blocks, Diode Terminal Blocks, Fuse Ter-minal Blocks, Disconnect Terminal Blocks, X-COM® SYSTEM, X-COM®S SYSTEM, PUSH
WIRE® Connectors for Junction Boxes, Lighting Connectors
Excerpt from Full Line Catalog, Volume 1, Rail-Mounted Terminal Block Systems
Connectors and PCB Terminal BlocksMULTI CONNECTION SYSTEM: MICRO, MINI, MINI HD, MIDI, MIDI Classic, MAXI Rail-Mounted Terminal Blocks, Modular Terminal Blocks, Double-, Triple- and Quadruple-
Deck Terminal Strips, SMD Terminal Blocks, Terminal Blocks
Excerpt from Full Line Catalog, Volume 2, Connectors and PCB Terminal Blocks
AUTOMATIONFieldbus Couplers, Programmable Fieldbus Controllers, Input and Output Modules, PERSPECTO®, TO-PASS®
Shield Connecting System
Excerpt from Full Line Catalog, Volume 3, AUTOMATION
INTERFACE ELECTRONICJUMPFLEX®, Relay Modules, Optocoupler Modules, Relay Sockets, Interface Modules, Function Modules, Mounting Carriers
Excerpt from Full Line Catalog, Volume 4, INTERFACE ELECTRONIC
WINSTA® – The Connection SystemApplications, Product Range, System Partners
Reference to Full Line Catalog, Volume 5, WINSTA® – The Connection System
TECHNICAL SECTION
SEARCH AIDS
ACCESSORIES Marking AccessoriesMounting AccessoriesTools
Derating CurvesTechnical Information
IndexApprovals – User GuideItem Number Index and WAGO Addresses
04
1951
spring clamp
WAGO PUSH WIRE® Connector for Junction Boxes
Rail-mounted terminal ®
Pluggable electronic functions on rail-mounted terminal blocks
WAGO SPEEDWAY 767,
Since its establishment in 1951, WAGO has been pioneering innovative connection systems in electrical
-
Precisely designed and manufactured, spring-loaded connections not only guarantee a faster and easier connection, but also offer a higher safety level since the contact quality is largely independent of operator
Pressure Termination Technology and is providing
success story of the CAGE CLAMP® began – “vibra-
Safe operation for countless devices, systems and installation depends on the unconditional reliability of
ELECTRICAL
IIIINNNNTTTTEEEERRRRCCCCOOOONNNNNNNNEEEECCCCTTTTIIIIOOOONNNNSSSS
AAUUTTOOMMAATTIIOONN
POWER CAGE CLAMP®
WINSTA® – The Connection System
1995
0 5
TO-PASS® – Scalable Tele-control Technology
PERSPECTO®
Touch and Control PanelsWAGO JUMPFLEX®
Transducers and Pluggable Relay Modules
TOPJOB®S Rail-Mounted Terminal Blocks
X-COM® S PUSH WIRE® Connector for Junction Boxes,
Compact splicing con-nectors for all conductor types
0
1995
From Pioneer to Leader
Number of spring clamps for terminal blocks and connectors produced to date
-mination technology debuted at the Hanover Fair
of the time did not meet the high quality require-ments
of CAGE CLAMP®-equipped rail-mount terminal
rail-mounted terminal blocks for conductors up to
With this reputation and WAGO’s slogan “vibration-®,
Today, CAGE CLAMP® technology has several
-ments, such as CAGE CLAMP®
for ultra-compact applications or WAGO POWER
for themselves: More than 53 billion spring clamps
53 billion clamps
0
WAGO Sondershausen
WAGO ChinaWAGO USA
WAGO Minden, Headquarters
-
global expansion, additional factories have been
-
Products manufactured locally for domestic and foreign markets create the starting point for a
enables WAGO subsidiaries and sales offices to develop and deliver custom-designed products
0
America > >
WAGO – At Home in the World
International success requires international presence.
WAGO is a group of companies that operates on
all continents and production facilities in Germany
-
Our presence in local markets enables us to pro-vide service tailored to our individual customers,
Production sites Sales companies
Representatives
0 9
Europe > > Asia > >
0
Installation Connectors
WAGO Product Range: Electrical Interconnections
Modular Terminal Blocks
X-COM®-SYSTEMX-COM®S-SYSTEM
PCB Terminal Blocks
0 11
Rail-Mounted Terminal Block Systems
Patchboard Systems
WINSTA® – The Connection System
Connectors
012
012
WAGO Product Range: Automation
Power Supplies
WAGO SPEEDWAY 767, Modular I/O-SYSTEM, IP67
PERSPECTO®
WAGO-I/O-SYSTEM, IP20
0 13
0 13
Relay Modules and Relay Sockets
Overvoltage Protection
Interface Modules
JUMPFLEX® – Transducers and Relay Modules
014
The Wide Variety of Applications
BUILDING AUTOMATION
POWER AND PROCESS TECHNOLOGY
Building installation and automation
0 15
INDUSTRY
Plant automation and traffic engineering
implement innovative solutions
create a compact design
save energy
make equipment safer
minimize installation, maintenance costs and
guarantee reliable operation under extremeconditions
guarantee high availability and technical safety
accommodate individual customer requirements
0
S
WAGO Connection Technologies
PUSH WIRE® technology is perfectly suited for fast connec-
PUSH WIRE®
--
Other types of PUSH WIRE®
Similarly, the connected conductor can be easily removed by
The CAGE CLAMP®S technology offers the same quality and handling features as the CAGE CLAMP®
--
This is achieved by simply pushing in the conductor until fully
0
CLAMP®
CLAMP®
2) in thousands
The CAGE CLAMP® technology is suitable for solid, stranded,
2
conductor, the CAGE CLAMP® spring must be opened using
inserted into the clamping point, is pressed against the current
force then ensures consistent clamping forces by automatically
The POWER CAGE CLAMP connection technology is suitable 2
The connected conductor is clamped in a double cage con-sisting of a spring-loaded bracket and the U-shaped current
-
-
0
S
Simple, easy-to-use design
CAGE CLAMP®S connection, push-in termination of solid and ferruled conductors
CAGE CLAMP® connection
CAGE CLAMP® connection
CAGE CLAMP®S connection
Front-entry wiring: Side-entry wiring:
0 19
1
2
3
4
1 2 3 4
1 2 3 4
A number of VDE directives mandate or recommend that only one conductor should or must be connected per clamping unit
-
Technical and economical benefits for the users:
Any conductor size combination per potential can be safely
changed is removed from the clamping point, all other
CAGE CLAMP® and CAGE CLAMP®S clamp all copper con-2
95mm2 2 -
The conductor is pressed against the current bar in the pre-defined contact area
CAGE CLAMP®
One Conductor per Clamping Unit – Damage-Free Connections for all Copper Conductors
An unlikely connection demonstrates this capability: 24 AWG 2 2) conductor
2
solid
stranded
CAGE CLAMP®
0
Vibration- and Shock-Proof – Maintenance-Free
The vibration-proof properties of CAGE CLAMP® connec-
international authorities have placed extremely demanding
have applied testing for electrical installations in rolling stock
DNV) have also held CAGE CLAMP® to their lofty approval
In the Impact Test --
movable portion of the connection
rigid portion of the connection
Maintenance-free operation results from excellent long-term consistency of the electrical and mechanical properties of the clamping connection – or more precisely, the clamping
under stresses such as vibrations, temperature changes and corrosive influences, in order to verify that the contact point
® technology has been demonstrated both through laboratory
-
The resulting maintenance-free operation reduces service
0 21
CAGE CLAMP® technology significantly reduces wiring times
Additional savings provided via faster project commis-sioning and elimination of service costs due to mainte-
Time-Saving
-nection
CAGE CLAMP® and CAGE CLAMP®S, solid
-rule, ferruled conductors
CAGE CLAMP®S, front-entry push-in termination
of solid and ferruled conduc-tors
Average manual wiring times in a percentage comparison (per MTM)100
90
80
70
60
50
40
30
20
10
0
100
48,3
24,4
Savings go further by reducing both material and labor costs through eliminating the need to prepare ferrules or pin
Front-entry terminal blocks are
in %
0 22
1__
10
mV
A
TestI
mV
≤ 10 mm
≤ 10 mm
Temperaturemeasurement
Voltage dropmeasuring point
Voltage dropmeasuring point
Gastight Clamping Units – Measurable Contact Quality
The Temperature-Rise Test examines the clamping unit, including the surrounding insulation, at rated current, over-
The Voltage Drop Test evaluates clamping unit quality under stresses such as vibrations, temperature changes and
The conductor is em-bedded into the soft
contact pressure,
The contact pressure
exerted by CAGE CLAMP®
Climatic chambers simulate standard atmospheres that could
Temperature Cycling Test to
Marine Applications GL, LR, DNV
Damp Heat,Cyclic (12 + 12 Hours)
Marine Applications GL, LR, DNV
CAGE CLAMP® and CAGE CLAMP®S results from gas-tight
CrNi spring steel) presses the connected conductor against
To best evaluate the quality of a clamping point, WAGO uses the following test procedures:
Nmm2P =
Force F [ N ]
Area A [mm2][ ]
0 23
mV
Test specimen
High-Current Carrying CapacityThe short-time withstand capacity
current-carrying capacity of 120A per mm2 nominal diameter In the case of a 4/0 AWG (95 mm²) High-Cur-rent Terminal Block, this translates to 11,400A!
Ground conductor terminal blocks are submitted to the
The pass criterion for the test is the voltage drop (limit value ® and CAGE CLAMP®S con-
-
Unrealistic test of a CAGE CLAMP®-equipped,12 AWG (4mm2) rail-mounted terminal block: Increase of current without time limit. In such an extreme test –
the electrical connec-tion is undamaged.
1 24
TOPJOB®@ Rail-Mounted Terminal Blocks2000, 2001, 2002, 2004, 2006, 2010 and 2016 Series
Commoning
Testing
Pre-assembled connectors
Jumper contacts that are not required can be broken off
Testing of TOPJOB®S rail-mounted terminal blocks using test plug adapter or testing tap
®S connec-
Conductor termination/removal
Commoning
Marking
same for unprepared fine-stranded conductors or small
Like the original CAGE CLAMP® ®
TOPJOB®S offers three marking positions for WMB mark-
800 V
800 V
stranded fine-stranded tip bonded
CAGE CLAMP®S clamps the following copper conductors:
solid
125
<___ 48,5 mm/1.91 in ___>
<___ 3
3 m
m/ _
___>
1
.3 in
<____________ 68 mm/2.67 in ____________>
<___ 3
3 m
m/ _
___>
1
.3 in
<_______ 58,5 mm/2.3 in _______>
<___ 3
3 m
m/ _
___>
1
.3 in
12
1
!
2-conductor through terminal block
gray 2000-1201
blue 2000-1204
orange 2000-1202
red 2000-1203
black 2000-1205
2000-1206
2-conductor ground terminal block
2000-1207
End and intermediate plate,
orange 2000-1292
gray 2000-1291
3-conductor through terminal block
gray 2000-1301
blue 2000-1304
orange 2000-1302
red 2000-1303
black 2000-1305
2000-1306
3-conductor ground terminal block
2000-1307
End and intermediate plate,
orange 2000-1392
gray 2000-1391
4-conductor through terminal block
gray 2000-1401
blue 2000-1404
orange 2000-1402
red 2000-1403
black 2000-1405
2000-1406
4-conductor ground terminal block
2000-1407
End and intermediate plate,
orange 2000-1492
gray 2000-1491
Color Item No. Pack. Unit Color Item No. Pack. Unit Color Item No. Pack. Unit
Item-Specific Accessories
2000 Series Accessories Appropriate marking systems: WMB/Marking Strips
Push-in type jumper bar, insulated, IN
14 A, light gray
2000-402
2000-403
2000-404
2000-405
: :
2000-410
Protective warning marker,
for 5 terminal blocks
2000-115
Operating tool with partially insulated shaft,
210-719 1
Insulated ferrules, extra long,
for TOPJOB®S terminal blocks
see page 195
Push-in type jumper bar, insulated, IN
14 A, light gray
1 - 3 2000-433
1 - 4 2000-434
1 - 5 2000-435
: :
2000-440
WMB Multi marking system,
plain 793-3501
Star point jumper, insulated,
IN = I
N terminal block, light gray
1–3–5 2000-405/011-000
Marking strips, plain
2009-110 1
Test plug adapter, for test plug 4 mm Ø
gray 2009-174
Testing tap, 2
gray 2009-182
1 2 2 2
0.14 - 1.0 (1.5) mm2 1 AWG 24 - 16 800 V/6 kV/3 600 V, 10 A UIN 13.5 A (18 A) 600 V, 10 A 2
Terminal block width 3.5 mm / 0.138 in L 9 - 11 mm / 0.39 in
0.14 - 1.0 (1.5) mm2 1 AWG 24 - 16 800 V/6 kV/3 600 V, 10 A UIN 13.5 A (18 A) 600 V, 10 A 2
Terminal block width 3.5 mm / 0.138 in L 9 - 11 mm / 0.39 in
0.14 - 1.0 (1.5) mm2 1 AWG 24 - 16 800 V/6 kV/3 600 V, 10 A UIN 13.5 A (18 A) 600 V, 10 A 2
Terminal block width 3.5 mm / 0.138 in L 9 - 11 mm / 0.39 in
TOPJOB®@Rail-Mounted Terminal Blocks 1.0 (1.5) mm²2000 Series
Suitable for Ex i applications
2 Approvals 2 Approvals 2 Approvals
2
1
<__ 3
3 m
m/ __>
1
.3 in
<__________ 70 mm/2.76 in __________>
<__ 3
3 m
m/ __>
1
.3 in
<______ 59,5 mm/2.34 in ______>
<__ 3
3 m
m/ __>
1
.3 in
<___ 48,5 mm/1.91 in ___>
12
TOPJOB®@Through/Ground Conductor and Ex Terminal Blocks 1.5 (2.5) mm2
2001 Series0.25 - 1.5 (2.5) mm2 1 AWG 22 - 14800 V/8 kV/3 600 V, 10 A 2IN 18 A (24 A) 600 V, 10 A U
Terminal block width 4.2 mm / 0.165 inL 9 – 11 mm / 0.39 in
0.25 - 1.5 (2.5) mm2 1 AWG 22 - 14800 V/8 kV/3 600 V, 10 A 2IN 18 A (24 A) 600 V, 10 A U
Terminal block width 4.2 mm / 0.165 inL 9 – 11 mm / 0.39 in
0.25 - 1.5 (2.5) mm2 1 AWG 22 - 14800 V/8 kV/3 600 V, 10 A 2IN 18 A (24 A) 600 V, 10 A U
Terminal block width 4.2 mm / 0.165 inL 9 – 11 mm / 0.39 in
2
2 2
2
2 Approvals 2 Approvals 2 Approvals
2-conductor through terminal block
gray 4 2001-1201
blue 4 2001-1204
orange 4 2001-1202
red 4 2001-1203
black 4 2001-1205
4 2001-1206
2-conductor ground terminal block
4 2001-1207
Other terminal blocks with the same profile:
Diode 2001-1211/1000-411 Volume 1
End and intermediate plate,
orange 2002-1292
gray 2002-1291
Separator,
orange 2002-1294
gray 2002-1293
3-conductor through terminal block
gray 4 2001-1301
blue 4 2001-1304
orange 4 2001-1302
red 4 2001-1303
black 4 2001-1305
4 2001-1306
3-conductor ground terminal block
4 2001-1307
Other terminal blocks with the same profile:
Diode 2001-1311/1000-411 Volume 1
LED 2001-1321/1000-434 Volume 1
End and intermediate plate,
orange 2002-1392
gray 2002-1391
Separator,
orange 2002-1394
gray 2002-1393
4-conductor through terminal block
gray 4 2001-1401
blue 4 2001-1404
orange 4 2001-1402
red 4 2001-1403
black 4 2001-1405
4 2001-1406
4-conductor ground terminal block
4 2001-1407
Other terminal blocks with the same profile:
Diode 2001-1411/1000-411 Volume 1
Diode 2001-1411/1000-434 Volume 1
Double-potential 2001-1441 Volume 1
End and intermediate plate,
orange 2002-1492
gray 2002-1491
Separator,
orange 2002-1494
gray 2002-1493
Color Item No. Pack. Unit Color Item No. Pack. Unit Color Item No. Pack. Unit
Item-Specific Accessories Separator for Ex e/Ex i applications, see page 30
2001 Series Accessories Appropriate marking systems: WMB/Marking Strips
Push-in type jumper bar, insulated, IN
2001-402
2001-403
2001-404
: :
2001-410
Insulation stop,
2
light gray 2001-171
WMB Multi marking system,
plain 793-4501 5
Marking strip, plain,
2009-110 1
Push-in type jumper bar, insulated, IN
1 - 3 2001-433
1 - 4 2001-434
1 - 5 2001-435
: :
2001-440
Protective warning marker,
for 5 terminal blocks
2001-115
Push-in type wire jumper, insulated, IN
2009-412
2009-414
2009-416
TOPJOB®S connector, modular,
gray 2001-511
Spacer module
gray 2001-549
Operating tool with partially insulated shaft,
210-719 1
Insulated ferrules, extra long,
for TOPJOB®S terminal blocks
see page 195
Suitable for Ex i applications
4 Suitable for Ex e II applications
1
1
<__ 3
3 m
m/ __>
1
.3 in
<___ 48,5 mm/1.91 in ___>
<__ 3
3 m
m/ __>
1
.3 in
<______ 59,5 mm/2.34 in ______>
<__ 3
3 m
m/ __>
1
.3 in
<__________ 70 mm/2.76 in __________>
1
12
!0.25 - 2.5 (4) mm2 1 AWG 22 - 12800 V/8 kV/3 600 V, 20 A UIN 24 A (32 A) 600 V, 20 A 2
Terminal block width 5.2 mm / 0.205 inL 10 - 12 mm / 0.43 in.
0.25 - 2.5 (4) mm2 1 AWG 22 - 12800 V/8 kV/3 600 V, 20 A UIN 24 A (32 A) 600 V, 20 A 2
Terminal block width 5.2 mm / 0.205 inL 10 - 12 mm / 0.43 in.
0.25 - 2.5 (4) mm2 1 AWG 22 - 12800 V/8 kV/3 600 V, 20 A UIN 24 A (32 A) 600 V, 20 A 2
Terminal block width 5.2 mm / 0.205 inL 10 - 12 mm / 0.43 in.
TOPJOB®@Through/Ground Conductor and Ex Terminal Blocks 2.5 (4) mm2
2002 Series
2 2
2
2 Approvals 2 Approvals 2 Approvals
2-conductor through terminal block
gray 4 2002-1201
blue 4 2002-1204
orange 4 2002-1202
red 4 2002-1203
black 4 2002-1205
4 2002-1206
2-conductor ground terminal block
4 2002-1207
Other terminal blocks with the same profile:
Diode 2002-1211/1000-411 Page 42
End and intermediate plate,
orange 2002-1292
gray 2002-1291
Separator,
orange 2002-1294
gray 2002-1293
3-conductor through terminal block
gray 4 2002-1301
blue 4 2002-1304
orange 4 2002-1302
red 4 2002-1303
black 4 2002-1305
4 2002-1306
3-conductor ground terminal block
4 2002-1307
Other terminal blocks with the same profile:
Diode 2002-1311/1000-411 Page 42
LED 2002-1321/1000-434 Page 42
End and intermediate plate,
orange 2002-1392
gray 2002-1391
Separator,
orange 2002-1394
gray 2002-1393
4-conductor through terminal block
gray 4 2002-1401
blue 4 2002-1404
orange 4 2002-1402
red 4 2002-1403
black 4 2002-1405
4 2002-1406
4-conductor ground terminal block
4 2002-1407
Other terminal blocks with the same profile:
Diode 2002-1411/1000-411 Page 42
Diode 2002-1411/1000-434 Page 42
Double-potential 2002-1441 Volume 1
End and intermediate plate,
orange 2002-1492
gray 2002-1491
Separator,
orange 2002-1494
gray 2002-1493
Color Item No. Pack. Unit Color Item No. Pack. Unit Color Item No. Pack. Unit
Item-Specific Accessories Separator for Ex e/Ex i applications, see page 30
2002 Series Accessories Appropriate marking systems: WMB/Marking Strips/WMB Inline/Mini-WSB
Push-in type jumper bar, insulated, IN
25 A, light gray
2002-402
2002-403
2002-404
: :
2002-410
Insulation stop,
light gray 2002-171 2
dark gray 2002-172 2
WMB Multi marking system,
plain 793-5501 5
Marking strip, plain,
2009-110 1
Push-in type jumper bar, insulated, IN
25 A, light gray
1 - 3 2002-433
1 - 4 2002-434
1 - 5 2002-435
: :
2002-440
Protective warning marker,
for 5 terminal blocks
2002-115
Staggered jumper, insulated, IN
25 A, light gray
2002-472
2002-473
2002-474
: :
2002-482
TOPJOB®S connector, modular,
gray 2002-511
Spacer module
gray 2002-549
Operating tool with partially insulated shaft,
210-720 1
Insulated ferrules, extra long,
for TOPJOB®S terminal blocks
see page 195
Suitable for Ex i applications
4 Suitable for Ex e II applications
1
1
<____ 52 mm/2.05 in ____>
<____ 3
9 m
m/ _
___>
1.5
4 in
<____ 52 mm/2.05 in ____>
<____ 3
9 m
m/ _
___>
1.5
4 in
12
2
0.25 - 2.5 (4) mm2 1 AWG 22 - 12 800 V/8 kV/3 600 V, 20 A UIN 24 A (32 A) 600 V, 20 A 2
Terminal block width 5.2 mm / 0.205 in L 10 - 12 mm / 0.43 in.
3-conductor through terminal block
gray 4 2002-6301
blue 4 2002-6304
orange 4 2002-6302
Additional colors pending
3-conductor ground terminal block
4 2002-6307
End and intermediate plate,
orange 2002-6392
gray 2002-6391
4-conductor through terminal block
gray 4 2002-6401
blue 4 2002-6404
orange 4 2002-6402
Additional colors pending
4-conductor ground terminal block
4 2002-6407
Notice: These terminal blocks cannot be commoned
with push-in type jumper bars!
End and intermediate plate,
orange 2002-6392
gray 2002-6391
0.25 - 2.5 (4) mm2 1 AWG 22 - 12 800 V/8 kV/3 600 V, 20 A UIN 24 A (32 A) 600 V, 20 A 2
Terminal block width 5.2 mm / 0.205 in L 10 - 12 mm / 0.43 in.
TOPJOB®@Through/Ground and Ex Terminal Blocks 2.5 (4) mm2, Angled Type2002 Series
2002 Series Accessories Appropriate marking systems: WMB/Marker Strips/WMB Inline/Mini-WSB
Item-Specific Accessories
Push-in type jumper bar, insulated, IN
25 A, light gray
2002-402
2002-403
2002-404
2002-405
: :
2002-410
Push-in type jumper bars, light gray, insulated, IN 25 A
1 - 3 2002-433
1 - 4 2002-434
1 - 5 2002-435
: :
2002-440
Staggered jumper, insulated, IN
25 A, light gray
2002-472
2002-473
2002-474
2002-475
: :
2002-482
TOPJOB®S connector, modular,
gray 2002-511
Spacer module
gray 2002-549
Operating tool with partially insulated shaft,
210-720 1
3- and 4-conductor terminal blocks
The TOPJOB®S rail-mounted terminal blocks have a 35-degree conductor entry angle permitting a very small bend radius and an
-
duct to be placed very close to the terminal
Product features:
CAGE CLAMP®S connection for all con-
solid and ferruled conductors being simply pushed in
Vibration-proof, fast, maintenance-freeterminations
3-conductor through and ground conduc-
4-conductor terminal blocks permit poten-
or terminal blocks needed
3- and 4-conductor terminal blocks havethe same dimensions
-ing from a 3-conductor terminal block to a
Color Item No. Pack. Unit Color Item No. Pack. Unit
Insulated ferrules, extra long,
for TOPJOB®S terminal blocks,
see page 195
Insulation stop,
light gray 2002-171 2
dark gray 2002-172 2
Protective warning marker,
for 5 terminal blocks
2002-115
Test plug adapter, for test plug 4 mm Ø
gray 2009-174
Testing tap, 2
gray 2009-182
Banana plugs,
black 215-311
red 215-212
blue 215-711
Suitable for Ex i applications
4 Suitable for Ex e II applications
2 Approvals 2 Approvals
2 2
2
1