Rugged Open VPX NVMe SSD Module
VP1-250-eSSD
Features
Out-of-the-box software,drivers and manageabilityenable easy adoption andstorage interoperability
Capacities from 1.6TB to15TB
Optimized register interfaceand command set lowerslatency
Performance:Seq. 128KB read: 3.5 GB/sSeq. 128KB write: 3.5 GB/sRnd 4KB read: 850,000 IOPSRnd 4KB write: 310,000 IOPS
Operating shock: 1500G @0.5ms half-sine
Operating vibration: 3.1GRMS
5–800Hz @ 30 min/axis
Advanced flash managementfor enhanced reliability anddurability
Streamlined protocol withefficient queuing mechanismto scale for multi-core CPUs
TCG Compliant AES-256Encryption
2,000,000 hours MTBF
Made in USA
The VP1-250-eSSD is 3U VPX SSD storage module that delivers extremely highperformance via a single Fat Pipe (PCIe x4 Gen3). Designed from the ground upto remove legacy layers of hard drive interfaces such as SATA and SAS, it takesfull advantage of the speed and parallelism of solid state nonvolatile memory.Streamlined efficient queuing protocol combined with an optimized command setregister interface enables low latency and high performance. Data is deliveredfast and efficiently with minimal burden on the host CPU.
NVM Express (NVMe) is an industry-standard registered interface designed toaccelerate the performance of nonvolatile PCI Express (PCIe) SSDs. The NVMeprotocol was established in collaboration by server industry leaders to standard-ize a scalable PCIe interface, making it easier for designers to unlock the fullpotential of PCIe. NVMe provides opportunities for increased data throughputand reduced latency all while reducing the number of drives needed — both nowand in the future. Adoption of this industry standard is driven by a strong consor-tium of storage technology providers and a robust ecosystem of drivers acrossmultiple operating systems.
2002
Rugged VPX Disk Module
Phoenix International is AS 9100 Rev D/ISO 9001:2015Certified
Phoenix International Systems, Inc.812 W. Southern Ave., Orange, CA 92865-3224
(714) 283-4800 Fax (714) [email protected] www.phenxint.com
TECHNICAL SPECIFICATIONS
EnvironmentalForm Factor:
3U VPX bus 6.299" (160mm) x 3.937" (100mm)
Module Interface:
PCIe x4 (Gen 3)
Temperature, operational:
Temperature: 0° to 70°C (Case Temp.)
Temperature, storage:
-40° to 85°C
Vibration:
3.1GRMS, 5Hz-800Hz @ 30 min/axis
Phoenix InternationalPhoenix International is an AS9100 Rev D/ISO 9001:2015 certified small business manufacturer of RuggedCOTS data storage products. Phoenix developed state of the art enabling technology provides users withmass storage products that ensure the highest performance data storage and network attached systems.These systems range in size and application from multi-terabyte Fibre Channel RAID, NAS and Storage AreaNetwork (SAN) configurations to conduction cooled plug-in VME/VPX solid state (flash) storage modules.
Shock:
1500G @ 0.5ms half-sine
Altitude:
80,000 feet
Relative Humidity:
5 to 95%, non-condensing
MTBF:
2,000,000 device hours
Compliance SpecificationsThe VP1-250-eSSD NVMe Drive Module is designed to meet CE Emissions specification EN 55022, CEImmunity specification EN 50082-2 and FCC 47 CFR, Part 15, Class A when tested in a shielded enclosure.Meets VITA 46, 48 and 65: VPX System Specifications and Practices.
3U Open VPX Conduction Cooled Module
