VorSpin Hydrocyclones:Hydrocyclones use the centrifugal separation principle to remove or classify suspended solids in a slurry.
The VorSpin Hydrocyclone features three improvements in hydrocyclone efficiency: 1) A Volute feed inlet, 2) A fluted Vortex Finder and 3) a Non-plugging discharge Apex nozzle.
The Volute feed inlet prevents the slurry from circulating back into the path of the incoming slurry, causing undesirable turbulence that will reduce separation efficiency.
The fluted Vortex Finder shape increases the momentum as the incoming slurry swirls around the decreasing cross-sectional area, causing a more rapid separation of the suspended solids. This also prevents larger particles from "short circulating" and reporting out the Vortex Finder with the liquid phase.
Clean Liquid Overflow
Solids Under Flow
Conical Body
Isometric Cut-Away
Apex Nozzle (1”)
Fluted Vortex Finder
Pressurized Feed Inlet
Elbow 1.5”
Tri-Clamp 3”
Conical Body
Threaded Adapter
Threaded Adapter
Compatible Components CorporationWebsite: www.cccmix.com • Email: [email protected] Telephone: 713-688-2008 • Fax: 713-688-2993Address: 1234 North Post Oak Rd., Suite 100 Houston, TX 77055
Effective & Efficient Liquids/Solids Separation
VorSpin Hydrocyclone
FRONT VIEWSCALE 1 / 4
SECTION B-BSCALE 1 / 4
A
A
5.9
[151
]
20.6
[52
4]
4.5
[114
]
SECTION A-ASCALE 1 / 4
4.8 [122]
1.9 [47]
Model Sizes: 1” - 1½’’ - 2” & - 3”
Stainless Steel Body
Circular Manifold Arrangement
Parallel Manifold Arrangement
Compatible Components CorporationWebsite: www.cccmix.com • Email: [email protected] Telephone: 713-688-2008 • Fax: 713-688-2993Address: 1234 North Post Oak Rd., Suite 100 Houston, TX 77055
Stainless Steel Construction
VorSpin Hydrocyclone
