![Page 1: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/1.jpg)
Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel
CellsAndrew Carrier1, Dominik Wechsler1, Philip Jessop1, Boyd Davis2
1Department of Chemistry2Queen’s-RMC Fuel Cell Research CentreQueen’s UniversityKingston, Ontario, Canada
Hydrogen + Fuel Cells 2009Vancouver, BC, CANADAJune 2, 2009
![Page 2: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/2.jpg)
Problem• Transport trucks use
~ $5.3 billion worth of fuel a year in Canada.
• About 70% of fuel energy is lost as waste heat from the exhaust and engine block.
• Recovery of some waste heat would result in significant fuel savings.
heatingof exhaust
heatingof engine
auxiliary electrical systems
energy from fuel
![Page 3: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/3.jpg)
Proposed Solution• Thermally regenerative fuel
cell (TRFC).• Fuel cell could power a
hybrid electric engine or auxiliary components.
• Vehicle radiator would be replaced with dehydrogenation reactor.
• Fuel cell would be used to charge a battery which could then be used for electric assist driving or in place of idling an engine.
reactor
wasteheat
B
A
H2
fuel cell
A B + H2
electricity
![Page 4: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/4.jpg)
-CONFIDENTIAL- 4
Recovery Goal• For diesel trucks ~ 40% lost as waste heat• Goal is to capture 10% of this heat
– (4% of fuel saved)• Value greater since it would replace APU electricity
• Average transport truck mileage is about 100,000 km with annual fuel costs of $30K
• 5% savings is $1500 per year• Payback 3 years on 20 year lifespan
assuming 5K installation
![Page 5: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/5.jpg)
Recovery GoalLong haul trucking ideal for product entry• High fuel consumption• Low braking (no regenerative braking)• High APU demand• Underhood space• Fuel cell would act in a non-critical role• Emissions with start and stop trucking
![Page 6: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/6.jpg)
Fluid Properties• React with excellent selectivity• Liquid• Boiling point > 200 ºC• High thermal stability• Rapid reaction rates• Low cost• Low toxicity
![Page 7: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/7.jpg)
State of the Art• Isopropanol-acetone system
(CH3)2CHOH (CH3)2CO + H2
– Aqueous system– Uses low quality heat (100 °C)– V and I both improved with higher
acetone/isopropanol ratio at cathode
![Page 8: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/8.jpg)
Hydrogenation is favoured at low T Dehydrogenation is favoured at high T Reaction thermodynamics are understood Predictable equilibrium compositions Predictable cell voltages
Thermodynamics
![Page 9: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/9.jpg)
Selectivity
S 3000 cycles 30 000 cycles
99.99% 74% 5%
99.995% 86% 22%
99.999% 97% 74%
The current selectivity is >99.9% which is the limit of detection for our analytical method.
![Page 10: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/10.jpg)
Initial rate is 3.6 L‐H2 min-1 kg-1.
Rate decreases as reaction approaches equilibrium.
Reaction will reach steady state with that of the fuel cell.
Kinetics
0 10 20 30 40 50 600%
10%
20%
30%
40%
50%
H2 @ 200 °C 0.1 mol% Catalyst
t (min)
![Page 11: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/11.jpg)
Hydrogenation proceeds in fuel cell. Cell potential drops rapidly if flow of
hydrogen acceptor across the cathode is stopped.
Cell potential is dependent on the difference of the fluid composition from its equilibrium composition.
Cell potential is highest when the difference between the two temperature regions is highest.
Fuel Cell
![Page 12: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/12.jpg)
Technology would help the local automotive industry have an advantage in the international marketplace.
Decreased fuel cost decreases the cost of shipping goods.
Decreased fuel use lowers greenhouse gas emissions
Benefits
![Page 13: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/13.jpg)
A number of candidate systems have been identified as a result of a screening of potential compounds
Two systems have been tested in a fuel cell coupled to a regeneration reactor.
Both performed well◦ Voltages as expected◦ Steady output◦ Membrane stable
Current Status
![Page 14: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/14.jpg)
Develop system where dehydrogenated material boils at a substantially lower temperature.
Dehydrogenated material is concentrated in the cathode stream.
High rates are maintained. Cell potential is improved. Pumping requirements reduced.
Future Work
![Page 15: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/15.jpg)
Explore commercially available materials Develop rapid catalyst screening methods Produce new catalysts in-house Run prototype fuel cells
◦ Integrated operation◦ Connect to diesel engine
Rate of heat absorption Economic evaluation following above work
◦ Non-automotive applications
Future Work
![Page 16: Vehicle Waste Heat Recovery Using Thermally Regenerative Fuel Cells](https://reader035.vdocuments.site/reader035/viewer/2022062814/56816724550346895ddbafca/html5/thumbnails/16.jpg)
Questions