Download - Valve Control Sensor Brochure UK
-
7/30/2019 Valve Control Sensor Brochure UK
1/10102
Feedback systemsfor valves andvalve actuators.
www.i
fm.com
/gb/valve-control
Positio
n
sensors
-
7/30/2019 Valve Control Sensor Brochure UK
2/10
Inductive sensorsIF, IG, II and IS type
2
Valve sensors from ifm electronic.The optimum solution for every requirement.
For industrialapplications
Feedback systemefector valvis
IX type
Inductive
dual sensorsIND type
Continuous
position feedbackon rising stemvalves
Position feedbackon quarter-turnactuators
Position feedbackon rising stemvalves or inside
switchboxes
-
7/30/2019 Valve Control Sensor Brochure UK
3/10
VDI/VDE
3845
Feedbackoftwovalvepositions
Feedbackofthreevalvepositions
AS-iconnection
AS-iconnection
3
Positionfeedbackon
risin
gstemv
alves
orinsideswitchboxes
Continu
ous
positionfeedback
onrisingstemv
alves
Positionfeedbackon
quarter-turnactuato
rs
-
7/30/2019 Valve Control Sensor Brochure UK
4/104
Clearly visible positionindicators:LEDs indicate current positionand switching status as well asmarkings located on the target
puck.
Robust housing:IND type sensors incorporate twodistinct inductive elements in ahousing sealed to IP 67. Thetough housing will also with-stand impacts allowing their usein any application.
Compatible with
VDI / VDE 3845:All IND sensors are compatiblewith VDI / VDE 3845 guidelinesmeaning they are simple to fitto nearly any actuator.
Connection opportunities:Versions with integrated AS-ichips allow simple addition toAS-i networks, M12 cabledversions and units with a
terminal chamber mean thatifms INDs are the simplestchoice for valve control.
Dual sensor IND type
Unit with terminal chamber:Two captive screws above the cablegland enable easy opening and closingof the terminal chamber.The wiring can be maintained if thesensor is replaced, thanks to theremovable terminal block.As an option, a solenoid valve can betriggered.
IND units combine
two distinct induc-
tive proximity sen-
sors in a single,
double insulated, IP
67 housing. One
sensor provides a si-
gnal when the valveis open, the other
when it is closed.
The units are invalu-
able for confirming
that power-opera-
ted
-
7/30/2019 Valve Control Sensor Brochure UK
5/105
d manual valves
e in the appro-
ate position for
rrect and safe
eration in all
pes of process
ant.
DI / VDE 3845 is aideline which de-
es, amongst other
ngs, the mechani-
mount-
ing arrangements
for fitting switch
boxes to actuators.
The IND units have
been specifically de-
signed to conform
to and take advan-
tage of this guide-line, allow-
ing them to be
fitted to the major-
ity of actuators with
the minimum of ef-
fort.
Position feedback onquarter-turn actuators.
Positionfeedbackon
risin
gstemv
alves
orinsideswitchboxes
Continu
ous
positionfeedback
onrisingstemv
alves
Positionfeedbackon
quarter-turnactuato
rs
using state-of-the-art productionhnologies it has become possible toorporate the latest AS-i technologyh sensors and switching outputs inpace-saving housing.these features facilitate mounting,-up and maintenance for the userd increase uptime of the whole-Interface system.
Namur IND units used with quarter-turn valves installed on an oil tanker.Sensors with ATEX Cat. 1D/1G/2G werechosen because of the installationinside an explosive area.
Many accessories are available including targetpucks for most valve actuators. The selectorfacilitates the selection of pucks for different
quarter-turn actuators.www.ifm.com/gb/puck-selector
-
7/30/2019 Valve Control Sensor Brochure UK
6/106
AS-i integrated:AS-Interface from ifm is the idealway to communicate feedbackfrom multiple valves and is incor-porated, as standard, in the
efector valvis.
Freely programmable:With 3 switching outputs, theefector valvis gives reliableindication of the valve pistonsposition: open, closed or seat lift.
Simple set up:Uncomplicated programming bypushing a button replaces
mechanical adjustment to therespective valve positions.
Adapters:Rising stem valves differ ofcourse, so a range of adapters formany valve types, for exampleAlfa Laval, Sdmo, GEM andGeorg Fischer, are available.
Requirement:
Everywhere in the
food industry
valves are used for
shutting off, moni-
toring and control-
ling. They are deci-
sive components forthe safety, accuracy
and reliabil-
ity of plants.
Implementation:
Conventionally, ma-
gnetic or induc- tive
proximity
switches assume this
task. They
signal end stops
such as open or
closed to the con-
troller by means of a
switch-ed signal.
Feedback systemefector valvis IX type
Easy position setup due to freelyprogrammable switching outputs.They transmit the actual limits oftravel to the controller.
For a comprehensive selectionof accessories and adapters forefector valvis see www.ifm.com.
-
7/30/2019 Valve Control Sensor Brochure UK
7/107
Positionfeedbackon
risin
gstemv
alves
orinsideswitchboxes
Continu
ous
positionfeedback
onrisingstemv
alves
Positionfeedbackon
quarter-turnactuato
rs
owever, the detec-
n of intermediate
sitions is of in-
easing inter- est. It
ows the detection
cleaning cycles
r rising stem val-
s as well as theualisation of unin-
nded operat-
g states by means
contin-
us valve detec-
n. This is the only
ay to meet the
owing
quirements of mo-
rn process
ualisation.
Product information efector valvis
www.ifm.com/gb/valvis
Continuous position feedback on single,double seat and diaphragm valves.
With thanks to different adapters,efector valvis can be mounted onvarious valve types. In this case it isinstalled on an ON-OFF diaphragmvalve. I.e. two switching points haveto be set up. By missing the Seatposition out, the sensor realises thatonly two switching points are needed.
efector valvis was designed forfeedback of the valve positions onrising stem valves with a stroke of upto 80 mm. The sensor is fitted overthe valve spindle and continuouslymeasures the stroke. This shows aninstallation on double seat valves, allthree switching points are used.
-
7/30/2019 Valve Control Sensor Brochure UK
8/108
System at a glance:
Inductive dual sensors Target pucks and accessories
Type Order no
IND IN0110
IND IN5331
IND IN5327
IND single solenoid IN5334
IND terminal,double solenoid IN5409
IND single solenoid
Operatingvoltage [V]
20...250 AC/DC
24 DC
24 DC
24 DC
24 DC
AS-i
Connection
2 m cable, 2 x 2 wires
M12, 2 x 2 wires
M12, 2 x 3 wires
Rd24, M12 solenoid, 7 wires
M20 + terminals, 7/8 wires
M12, M12 solenoid, 2 wires AC2316
IND double solenoid AS-i M12, 2 x M12 solenoid, 2 wires AC2317
IND ATEX 8.2 DC Namur M12, 2 x 2 wires NN5008
IND ATEX 8.2 DC Namur M18, 2 x 2 wires NN5013
IND ATEX,single solenoid
8.2 DC Namur Rd24, M12 solenoid, 6 wires + PE N95001
Description
Target puck, 53 mm
Target puck, 53 mm,8 switching flag positions
Target puck, 65 mm,
Target puck, 102 mm,
Cable gland, M20 x 1.5
Protective cap, M20 x 1.5
Order no
E10661
E17321
E17327
E17328
Feedback system efector valvis Accessories mounting adapter
Type Order no
IX IX5010IX IX5030
IX IX5002
Operatingvoltage [V]
24 DC binaryAS-i
1...5 analogue
Connection
0.3 m Pigtail M12, 5 wires0.3 m Pigtail M12, 2 wires
2 m cable, 3 wires
Inductive sensors
Type Order no
V3 microswitch style IS5001
V3 microswitch style IS5026
V3 microswitch style IS0003
Operatingvoltage [V]
24 DC
24 DC
20...140 AC /10...140 DC
Connection
2 m cable, 3 wires
2 m cable, 2 wires
2 m cable, 2 wires
V3 microswitch style NS50028.2 V DC Namur 2 m cable, 2 wires
V3 microswitch style NS50098.2 V DC Namur 0.098 m cable, 2 wires
M12 body IFT24024 DC M12, 3 wires
M18 body IGT24724 DC M12, 3 wires
M30 body IIT22824 DC M12, 3 wires
Description
for Alfa Laval valvesfor Sdmo valves
for Bardiani valves
IX / 30 mm, for Gem actuators
Order no
E11900E11989
E12170
E12042
IX / 45 mm, for Gem actuators E12043
E12208
E12209
Plug for covering the oblong holes E12212
Reinforcement bracket E11310
Flat cable connector E70096
-
7/30/2019 Valve Control Sensor Brochure UK
9/10
Robust:Tried and tested for extremerequirements in hygienic andwet areas such as permanentlyhigh temperatures, temperature
shocks or aggressive cleaningagents.
Food-grade:Housing materials such asstainless steel in combinationwith PEEK or pure stainlesssteel sensors.
Flexible:Common housing types and
lengths for installation in differ-ent applications. Increasedsensing ranges ensure flexibleinstallation for mechanicaltolerances.
Ingress-resistant:The ingress resistance toprotection rating IP 69K preventsmoisture penetration.
Safe connection:ecolink EVT the ideal connectorfor hygienic and wet areas:PVC cables and housings plusstainless steel coupling nutsprovide protection to IP 69K.
Inductive sensorsIF, IG, II and IS type
Position feedback onrising stem valves orinside switchboxes.
The sensors undergo a hard test pro-gram of temperature cycle, steamboiler, vibration, shock and temperatureThis procedure guarantees the highestoperational reliability for anyconditons in the food industry.
The common valve boxes can be usedwith the square-shaped sensors oftype IS.Customer-specific versions suchas platinum connectors facilitateinstallation.
Positionfeedbackon
risin
gstemv
alves
orinsideswitchboxes
Continu
ous
positionfeedback
onrisingstemv
alves
Positionfeedbackon
quarter-turnactuato
rs
-
7/30/2019 Valve Control Sensor Brochure UK
10/10
ifm electronic gmbh
Friedrichstrae 145128 Essen
Tel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200
E-mail [email protected]
Position sensors
Sensors formotion control
Industrial imaging
Safety technology
Process sensors
Condition monitoringsystems
Industrialcommunication
Identification systems
Systems formobile machines
Connectiontechnology
Overviewifm product range:
Accessories
Visit our website:
www.ifm.com
Over 70 locations worldwide at a glance at www.ifm.com
ifmarticleno.
7511
507Wereservetherighttomaketechnicalalter
ationswithoutpriornotice.PrintedinGermanyo
nnon-chlorinebleachedpaper.09/12