Transcript
  • V Show Commands

    • show vdc, page 4

    • show vdc current-vdc, page 6

    • show vdc fcoe-vlan-range, page 7

    • show vdc resource (res_mgr), page 8

    • show vdc resource (res_mgr), page 9

    • show vdc resource template, page 11

    • show version, page 12

    • show version compatibility, page 14

    • show version fex, page 15

    • show version image, page 16

    • show version module, page 17

    • show version module epld, page 18

    • show virtual-service, page 19

    • show virtual-service storage pool list, page 23

    • show virtual-service tech-support, page 24

    • show virtual-service utilization name, page 25

    • show virtual-service version, page 28

    • show vlan-mgr errors, page 29

    • show vlan-mgr event-history, page 30

    • show vlan, page 31

    • show vlan access-list, page 34

    • show vlan access-map, page 44

    • show vlan all-ports, page 46

    • show vlan counters, page 48

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 1

  • • show vlan dot1Q tag native, page 50

    • show vlan filter, page 51

    • show vlan id, page 52

    • show vlan id counters, page 55

    • show vlan id vn-segment, page 57

    • show vlan mib private-vlan type, page 58

    • show vlan name, page 60

    • show vlan private-vlan, page 63

    • show vlan private-vlan interface host, page 64

    • show vlan private-vlan interface mapping, page 65

    • show vlan private-vlan interface mode, page 66

    • show vlan private-vlan interface trunk, page 67

    • show vlan private-vlan mapping, page 69

    • show vlan private-vlan type, page 70

    • show vlan reserved, page 72

    • show vlan xbrief, page 74

    • show vlan xsummary, page 76

    • show vpc (mcecm), page 77

    • show vpc (mcecm), page 82

    • show vpc consistency-parameters, page 96

    • show vpc consistency-parameters vlans, page 97

    • show vpc orphan-ports, page 101

    • show vpc peer-keepalive, page 102

    • show vpc role, page 105

    • show vpc statistics, page 108

    • show vpc statistics peer-keepalive, page 109

    • show vrf, page 110

    • show vrf interface, page 112

    • show vrf topology, page 113

    • show vrrp, page 114

    • show vrrp bfd-sessions, page 118

    • show vtp counters, page 120

    • show vtp datafile, page 122

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)2

    V Show Commands

  • • show vtp domain id, page 123

    • show vtp interface, page 125

    • show vtp mibstats, page 126

    • show vtp password, page 127

    • show vtp status, page 128

    • show vtp trunk interface, page 131

    • show vtp vlan, page 133

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 3

    V Show Commands

  • show vdcshow vdc [ e-vdc2 ] [feature-set| detail|membership [all| status|module module]| shared membership][__readonly__ [detail2] [ swmode ] TABLE_vdc vdc_id vdc_name state mac hap sw boot_order [prioprio_per] [ create_time ] [ reload_count ] [ restart_count ] [ restart_time ] [ restart_reason ] vtype lc-support[TABLE_fs fs_id fs_name] [TABLE_port port-list]]

    Syntax Description Show Virtual Device Contextsshow

    Show Virtual Device Contextsvdc

    Type: userdef

    Enter Virtual Device Context

    e-vdc2

    Show detailed vdc informationdetail

    Show vdc interface membership informationmembership

    Show the shared interfaces in a vdcshared

    Show the shared interfaces in a vdcmembership

    Show vdc interface membership information for a specific moduleonly

    module

    Type: integer

    Show vdc interface membership information for a specific moduleonly

    module

    Show vdc related port-statusstatus

    Show vdc feature-set informationfeature-set

    Show offline modules as wellall

    Read Only__readonly__

    detail2

    Type: stringswmode

    TABLE_vdc

    Type: uinteger

    vdc-id

    vdc_id

    TABLE_port

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)4

    V Show Commandsshow vdc

  • Type: interface

    port membership for VDC

    port-list

    Type: string

    vdc-name

    vdc_name

    Type: string

    state

    state

    Type: string

    mac address for VDC

    mac

    Type: string

    hap policy

    hap

    Type: string

    sw policy

    sw

    Type: stringvtype

    Type: stringlc-support

    Type: datecreate_time

    Type: uintegerreload_count

    Type: uintegerrestart_count

    Type: daterestart_time

    Type: stringrestart_reason

    TABLE_fs

    Type: uinteger

    fs id

    fs_id

    Type: stringfs_name

    Type: integerboot_order

    Type: integerprio

    Type: integerprio_per

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 5

    V Show Commandsshow vdc

  • show vdc current-vdcshow vdc current-vdc [__readonly__ mode name]

    Syntax Description Show Virtual Device Contextsshow

    Show Virtual Device Contextsvdc

    Show which vdc you are currently incurrent-vdc

    Read Only__readonly__

    Type: uinteger

    cli mode

    mode

    Type: string

    vdc name

    name

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)6

    V Show Commandsshow vdc current-vdc

  • show vdc fcoe-vlan-rangeshow vdc fcoe-vlan-range [__readonly__ fcoe-vdc [ fcoe-vlans ] [ sharing-vdcs ]]

    Syntax Description Show Virtual Device Contextsshow

    Show Virtual Device Contextsvdc

    vlans reserved for FCoE Not available in this release.fcoe-vlan-range

    Read Only__readonly__

    Type: uintegerfcoe-vdc

    Type: uintegersharing-vdcs

    Type: integer-mrangefcoe-vlans

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 7

    V Show Commandsshow vdc fcoe-vlan-range

  • show vdc resource (res_mgr)show vdc id resource [ res-mgr-res-known-name ] [__readonly__ TABLE_vdc_resource_single_vdcres_name min max used unused free]

    Syntax Description Show running system informationshow

    Show Virtual Device Contextsvdc

    Type: userdef

    Enter Virtual Device Context

    id

    Show resource configuration for VDCresource

    Type: string

    Resource name

    res-mgr-res-known-name

    Read Only__readonly__

    Type: string

    Resource Name

    res_name

    Type: uinteger

    Resource min configuration

    min

    Type: uinteger

    Resource max configuration

    max

    Type: uinteger

    Resource current usage for this VDC

    used

    Type: uinteger

    Resource reserved for this VDC but currently not used

    unused

    Type: uinteger

    Resource current free for this VDC

    free

    TABLE_vdc_resource_single_vdc

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)8

    V Show Commandsshow vdc resource (res_mgr)

  • show vdc resource (res_mgr)show vdc resource [ res-mgr-res-known-name ] [detail| hidden-too| with-flags]+ [__readonly__TABLE_resource resource_name total_used total_unused total_free total_avail total[TABLE_vdc_resource_across_vdcs vdc_name min max used unused free]]

    Syntax Description Show running system informationshow

    Show Virtual Device Contextsvdc

    Show resource configuration across VDCsresource

    Type: string

    Resource name

    res-mgr-res-known-name

    Show detail resource configurationdetail

    Also show hidden resourceshidden-too

    Also show resource flagswith-flags

    Read Only__readonly__

    TABLE_resource

    Type: string

    Resource Name

    resource_name

    Type: uinteger

    Resource current usage for all VDC

    total_used

    Type: uinteger

    Resources currently reserved but not used across all VDC

    total_unused

    Type: uinteger

    Resource current free for all VDC

    total_free

    Type: uinteger

    Resource current available across all VDC

    total_avail

    Type: uinteger

    Resources grand total

    total

    TABLE_vdc_resource_across_vdcs

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 9

    V Show Commandsshow vdc resource (res_mgr)

  • Type: string

    VDC name

    vdc_name

    Type: uinteger

    Resource min configuration

    min

    Type: uinteger

    Resource max configuration

    max

    Type: uinteger

    Resource current usage for this VDC

    used

    Type: uinteger

    Resource reserved for this VDC but currently not used

    unused

    Type: uinteger

    Resource current free for this VDC

    free

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)10

    V Show Commandsshow vdc resource (res_mgr)

  • show vdc resource templateshow vdc resource template [ res-mgr-template-known-name-all ] [__readonly__ TABLE_templatetemplate_name TABLE_resource resource_name min max]

    Syntax Description Show running system informationshow

    Show Virtual Device Contextsvdc

    Show resource configuration for VDCresource

    Resource template configurationtemplate

    Type: string

    pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

    length: 100

    Resource template name

    res-mgr-template-known-name-all

    Read Only__readonly__

    TABLE_template

    Type: string

    Resource Template Name

    template_name

    TABLE_resource

    Type: string

    Resource Name

    resource_name

    Type: uinteger

    Resource min configuration

    min

    Type: uinteger

    Resource max configuration

    max

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 11

    V Show Commandsshow vdc resource template

  • show versionshow version [__readonly__ header_str bios_ver_str [ loader_ver_str ] kickstart_ver_str [ sys_ver_str ]bios_cmpl_time kick_file_name kick_cmpl_time kick_tmstmp [ isan_file_name ] [ isan_cmpl_time ][ isan_tmstmp ] chassis_id module_id cpu_name memory mem_type proc_board_id host_name bootflash_size[ slot0_size ] kern_uptm_days kern_uptm_hrs kern_uptm_mins kern_uptm_secs [ rr_usecs ] [ rr_ctime ]rr_reason rr_sys_ver rr_service [TABLE_smu_list install_smu_id+] manufacturer]

    Syntax Description Show the software versionversion

    __readonly__

    Type: stringheader_str

    Type: stringbios_ver_str

    Type: stringloader_ver_str

    Type: stringkickstart_ver_str

    Type: stringsys_ver_str

    Type: stringbios_cmpl_time

    Type: stringkick_file_name

    Type: stringkick_cmpl_time

    Type: stringkick_tmstmp

    Type: stringisan_file_name

    Type: stringisan_cmpl_time

    Type: stringisan_tmstmp

    Type: stringchassis_id

    Type: stringmodule_id

    Type: stringcpu_name

    Type: integermemory

    Type: stringmem_type

    Type: stringproc_board_id

    Type: stringhost_name

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)12

    V Show Commandsshow version

  • Type: integerbootflash_size

    Type: integerslot0_size

    Type: integerkern_uptm_days

    Type: integerkern_uptm_hrs

    Type: integerkern_uptm_mins

    Type: integerkern_uptm_secs

    Type: integerrr_usecs

    Type: daterr_ctime

    Type: stringrr_reason

    Type: stringrr_sys_ver

    Type: stringrr_service

    TABLE_smu_list

    Type: stringinstall_smu_id

    Type: stringmanufacturer

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 13

    V Show Commandsshow version

  • show version compatibilityshow version compatibility uri0

    Syntax Description Show running system informationshow

    Show the software versionversion

    Show the software compatibility matrix with given imagecompatibility

    Type: uri

    Enter URI

    uri0

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)14

    V Show Commandsshow version compatibility

  • show version fexshow version fex i

    Syntax Description Show running system informationshow

    Show the software versionversion

    Show fex software versionfex

    Type: integer

    min: 100 max: 199

    Enter FEX identifier

    i

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 15

    V Show Commandsshow version fex

  • show version imageshow version image uri0

    Syntax Description Show running system informationshow

    Show the software versionversion

    Show the software version of a given imageimage

    Type: uri

    Enter URI

    uri0

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)16

    V Show Commandsshow version image

  • show version moduleshow version module module [__readonly__ TABLE_version slot type sw interim bios]

    Syntax Description Show running system informationshow

    Show the software versionversion

    Show the software version of a Modulemodule

    Type: integer

    Enter module number

    module

    __readonly__

    Show version infoTABLE_version

    Type: uinteger

    Slot

    slot

    Type: string

    image type

    type

    Type: string

    SW version

    sw

    Type: string

    SW interim version

    interim

    Type: string

    BIOS version

    bios

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 17

    V Show Commandsshow version module

  • show version module epldshow version module module epld

    Syntax Description Show running system informationshow

    Show the software versionversion

    Show the software version of a Modulemodule

    Type: integer

    Enter module number

    module

    Show a module's current EPLD versionsepld

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)18

    V Show Commandsshow version module epld

  • show virtual-serviceshow virtual-service [list| global| detail [name virt_serv_name]| core [name virt_serv_name_core]][__readonly__ [infrastructure_major_version infrastructure_minor_version total_virtual_services_installedtotal_virtual_services_activated maximum_vcpus_per_virtual_service machine_types_supportedmachine_types_disabled TABLE_resource_limits media_name quota committed available] [TABLE_listname status package_name] [TABLE_detail name package_name application_name application_versionapplication_description key_type signing_method licensing_name licensing_version ova_path statedisk_reservation memory_reservation cpu_reservation TABLE_attached_devices type name alias][TABLE_core name name_core]]

    Syntax Description Show running system informationshow

    Display virtualization service informationvirtual-service

    Virtual service global informationglobal

    List virtual serviceslist

    Detailed informationdetail

    Core informationcore

    Information for a specific virtual servicename

    Type: string

    pattern: [a-zA-Z0-9_]+

    length: 20

    Name of a virtual service

    virt_serv_name

    Type: string

    pattern: [a-zA-Z0-9_]+

    length: 20

    Name of a virtual service

    virt_serv_name_core

    Read Only__readonly__

    Type: uinteger

    Infrastructure major version

    infrastructure_major_version

    Type: uinteger

    Infrastructure minor version

    infrastructure_minor_version

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 19

    V Show Commandsshow virtual-service

  • Type: uinteger

    Total virtual services installed

    total_virtual_services_installed

    Type: uinteger

    Total virtual services activated

    total_virtual_services_activated

    Type: uinteger

    Maximum VCPUs per virtual service

    maximum_vcpus_per_virtual_service

    Type: string

    Machine types supported

    machine_types_supported

    Type: string

    Machine types disabled

    machine_types_disabled

    Virtual service global resource limitsTABLE_resource_limits

    Type: string

    Resource name

    media_name

    Type: uinteger

    Resource Virtualization quota

    quota

    Type: uinteger

    Resource Virtualization committed

    committed

    Type: uinteger

    Resource Virtualization available

    available

    Virtual service list tableTABLE_list

    Type: string

    Virtual service name

    name

    Type: string

    Virtual service status

    status

    Type: string

    Virtual service package name

    package_name

    Virtual service detail tableTABLE_detail

    Type: string

    Virtual service name

    name

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)20

    V Show Commandsshow virtual-service

  • Type: string

    Virtual service package name

    package_name

    Type: string

    Name of the application

    application_name

    Type: string

    Version of the application

    application_version

    Type: string

    Description of the application

    application_description

    Type: string

    Virtual service key type

    key_type

    Type: string

    Method used to sign the package

    signing_method

    Type: string

    Name of the license

    licensing_name

    Type: string

    Version of the license

    licensing_version

    Type: string

    Virtual service OVA path

    ova_path

    Type: string

    Virtual service state

    state

    Type: uinteger

    Virtual service disk reservation

    disk_reservation

    Type: uinteger

    Virtual service memory reservation

    memory_reservation

    Type: uinteger

    Virtual service CPU reservation

    cpu_reservation

    Attached devices tableTABLE_attached_devices

    Type: string

    Type of the attached device

    type

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 21

    V Show Commandsshow virtual-service

  • Type: string

    Name of the attached device

    name

    Type: string

    Alias for the attached device

    alias

    Virtual service core tableTABLE_core

    Type: string

    Virtual service name

    name

    Type: string

    Name of core

    name_core

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)22

    V Show Commandsshow virtual-service

  • show virtual-service storage pool listshow virtual-service storage pool list [__readonly__ [TABLE_storage pool_name pool_type pool_path]]

    Syntax Description Show running system informationshow

    Display virtualization service storage pool informationvirtual-service

    Storage information about virtual servicestorage

    Storage pool information about virtual servicepool

    List storage pool for virtual servicelist

    Read Only__readonly__

    Virtual service storage pool list tableTABLE_storage

    Type: string

    Virtual service storage pool name

    pool_name

    Type: string

    Virtual service storage pool type

    pool_type

    Type: string

    Virtual service storage pool path

    pool_path

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 23

    V Show Commandsshow virtual-service storage pool list

  • show virtual-service tech-supportshow virtual-service tech-support

    Syntax Description Show running system informationshow

    Gather information for virtualization services trouble shootingvirtual-service

    Gather information for trouble shootingtech-support

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)24

    V Show Commandsshow virtual-service tech-support

  • show virtual-service utilization nameshow virtual-service utilization name virt_serv_name [__readonly__ [TABLE_storage name alias rd_byteswr_bytes rd_requests wr_requests errors capacity used available usage] [TABLE_network name aliasrx_packets tx_packets rx_bytes tx_bytes rx_drops tx_drops rx_errors tx_errors] [TABLE_memory allocationused] [TABLE_cpu request actual state]]

    Syntax Description Show running system informationshow

    Display virtualization service utilization informationvirtual-service

    Utilization information about virtual serviceutilization

    Utilization of a virtual servicename

    Type: string

    pattern: [a-zA-Z0-9_]+

    length: 20

    Name of a virtual service

    virt_serv_name

    Read Only__readonly__

    Virtual service storage utilizationTABLE_storage

    Type: string

    storage device name

    name

    Type: string

    storage device alias

    alias

    Type: uinteger

    Read Bytes

    rd_bytes

    Type: uinteger

    Write Bytes

    wr_bytes

    Type: uinteger

    Read requests

    rd_requests

    Type: uinteger

    Write requests

    wr_requests

    Type: uinteger

    errors

    errors

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 25

    V Show Commandsshow virtual-service utilization name

  • Type: uinteger

    Capacity 1k blocks

    capacity

    Type: uinteger

    Used 1k blocks

    used

    Type: uinteger

    Available 1k blocks

    available

    Type: uinteger

    Usage

    usage

    Virtual service network utilizationTABLE_network

    Type: string

    network device name

    name

    Type: string

    network device alias

    alias

    Type: uinteger

    Received packets

    rx_packets

    Type: uinteger

    Transmitted packets

    tx_packets

    Type: uinteger

    Received bytes

    rx_bytes

    Type: uinteger

    Transmitted bytes

    tx_bytes

    Type: uinteger

    Received drops

    rx_drops

    Type: uinteger

    Transmitted drops

    tx_drops

    Type: uinteger

    Received errors

    rx_errors

    Type: uinteger

    Trnasmitted errors

    tx_errors

    Virtual service memory utilizationTABLE_memory

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)26

    V Show Commandsshow virtual-service utilization name

  • Type: uinteger

    Memory allocation

    allocation

    Type: uinteger

    Memory used

    used

    Virtual service cpu utilizationTABLE_cpu

    Type: uinteger

    Requested Application Utilization

    request

    Type: uinteger

    Actual Application Utilization

    actual

    Type: string

    CPU state

    state

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 27

    V Show Commandsshow virtual-service utilization name

  • show virtual-service versionshow virtual-service version {installed| name virt_serv_name installed} [__readonly__ virt_service_nameapplication_name application_version]

    Syntax Description Show running system informationshow

    Display virtualization service version informationvirtual-service

    Version information about virtual serviceversion

    Installed versioninstalled

    Version of a virtual servicename

    Type: string

    pattern: [a-zA-Z0-9_]+

    length: 20

    Name of a virtual service

    virt_serv_name

    Read Only__readonly__

    Type: string

    Virtual service name

    virt_service_name

    Type: string

    Application name

    application_name

    Type: string

    Application version

    application_version

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)28

    V Show Commandsshow virtual-service version

  • show vlan-mgr errorsshow vlan-mgr errors

    Syntax Description Show running system informationshow

    Show vlan manager event historyvlan-mgr

    Show vlan manager errorserrors

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 29

    V Show Commandsshow vlan-mgr errors

  • show vlan-mgr event-historyshow vlan-mgr event-history

    Syntax Description Show running system informationshow

    Show vlan manager event historyvlan-mgr

    Show vlan manager event historyevent-history

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)30

    V Show Commandsshow vlan-mgr event-history

  • show vlanshow vlan [__readonly__ vlanshowbr-hdr TABLE_vlanbrief vlanshowbr-vlanid vlanshowbr-vlanid-utfvlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ] vlanshowinfo-mtu-hdrTABLE_mtuinfo vlanshowinfo-vlanid vlanshowinfo-media-type vlanshowinfo-vlanmode[ vlanshowrspan-hdr1 ] [ vlanshowrspan-vlantype ] [ vlanshowrspan-hdr2 ] [ vlanshowrspan-vlanbitmap ][ pvlan-hdr ] [ pvlan-section ] [ pvlan-stby ] show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Read Only__readonly__

    VLAN brief table formatTABLE_vlanbrief

    MTU information table formatTABLE_mtuinfo

    Type: uinteger

    VLAN brief header

    vlanshowbr-hdr

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid-utf

    Type: string

    VLAN brief VLAN name

    vlanshowbr-vlanname

    VLAN brief VLAN state

    active value: 1

    VLAN Active State

    suspend value: 2

    VLAN Suspended State

    vlanshowbr-vlanstate

    VLAN brief shutdown state

    shutdown value: 1

    VLAN shut state

    noshutdown value: 2

    VLAN no shut state

    vlanshowbr-shutstate

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 31

    V Show Commandsshow vlan

  • Type: interface-mrange

    Port list ifindex

    vlanshowplist-ifidx

    Type: uinteger

    Vlan info mtu header

    vlanshowinfo-mtu-hdr

    Type: uinteger

    Vlan info VLAN ID

    vlanshowinfo-vlanid

    Select media type

    enet value: 1

    Vlan type Ethernet

    vlanshowinfo-media-type

    VLAN brief VLAN mode

    ce-vlan value: 0

    Classical Ethernet VLAN mode

    fabricpath-vlan value: 1

    Fabricpath VLAN mode

    vlanshowinfo-vlanmode

    Type: uinteger

    RSPAN VLAN header for one VLAN

    vlanshowrspan-hdr1

    Type: uinteger

    RSPAN VLAN header for multiple VLANs

    vlanshowrspan-hdr2

    RSPAN VLAN one VLAN rspan or non-rspan

    rspan value: 2

    VLAN is RSPAN VLAN

    notrspan value: 1

    VLAN is not RSPAN VLAN

    vlanshowrspan-vlantype

    Type: bitmap

    RSPAN VLAN multiple VLANs

    vlanshowrspan-vlanbitmap

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)32

    V Show Commandsshow vlan

  • Type: uinteger

    private vlan section

    pvlan-hdr

    Type: uinteger

    private vlan section

    pvlan-section

    Type: uinteger

    private vlan section on standby

    pvlan-stby

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 33

    V Show Commandsshow vlan

  • show vlan access-listshow vlan access-list name [ inp_seqno ] [__readonly__ TABLE_vacl vacl_name [ vacl_seqno ] [TABLE_listip_ipv6_mac acl_name [TABLE_seqno seqno {permitdeny [proto_str| proto| ip| ipv6] {src_any| src_ip_prefix|src_ip_addr src_ip_mask| src_ipv6_prefix| src_ipv6_addr src_ipv6_mask|mac_src mac_src_wild| src_addrgrp}[src_port_op [ src_port1_str ] src_port1_num [src_port2_str| src_port2_num]| src_portgrp] {dest_any|dest_ip_prefix| dest_ip_addr dest_ip_mask| dest_ipv6_prefix| dest_ipv6_addr dest_ipv6_mask| mac_destmac_dest_wild| dest_addrgrp} [dest_port_op [ dest_port1_str ] dest_port1_num [dest_port2_str|dest_port2_num]| dest_portgrp] [{icmp_type [ icmp_code ]| icmp_str}| {icmpv6_type [ icmpv6_code ]|icmpv6_str}] [igmp_type| igmp_type_str] [[precedence| precedence_str] [tos| tos_str]| [dscp| dscp_str]] [ log ][ capture_session ] [ fragments ] [plen_op plen1 [ plen2 ]] [ urg ] [ ack ] [ psh ] [ rst ] [ syn ] [ fin ] [ established ][ flow_label ] [ timerange ] [eth_proto| eth_proto_str] [ vlan ] [ cos ] [ match_count ]| remark}]]]

    Syntax Description Show running system informationshow

    Vlan commandsvlan

    Vlan access listaccess-list

    Type: string

    length: 64

    List name

    name

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    inp_seqno

    Type: string

    length: 64

    List name

    vacl_name

    __readonly__

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    vacl_seqno

    TABLE_vacl

    TABLE_list

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)34

    V Show Commandsshow vlan access-list

  • IP/iIPV6/MAC

    ip value: 9

    Display IP information

    mac value: 11

    MAC configuration commands

    ipv6 value: 10

    Configure IPv6 features

    ip_ipv6_mac

    Type: string

    length: 64

    Access list name

    acl_name

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    seqno

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    seqno

    Permit/deny

    permit value: 2

    Specify packets to forward

    deny value: 3

    Specify packets to reject

    permitdeny

    Type: uinteger

    min: 0 max: 255

    A protocol number

    proto

    TABLE_seqno

    Type: string

    Protocol name

    proto_str

    IP

    ip value: 1

    IP Protocol

    ip

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 35

    V Show Commandsshow vlan access-list

  • IPV6

    ipv6 value: 1

    IPv6 Protocol

    ipv6

    SRCAny

    any value: 1

    Any IP address

    src_any

    DESTAny

    any value: 1

    Any IP address

    dest_any

    Type: ipprefix

    Source IP prefix

    src_ip_prefix

    Type: ipaddr

    Source IP address

    src_ip_addr

    Type: ipaddr

    Source IP mask

    src_ip_mask

    Type: ipv6prefix

    Source IPv6 prefix

    src_ipv6_prefix

    Type: ipv6addr

    Source IP address

    src_ipv6_addr

    Type: ipv6addr

    Source IP mask

    src_ipv6_mask

    Type: ethernet

    Source MAC address

    mac_src

    Type: ethernet

    Source MAC mask

    mac_src_wild

    Type: ipprefix

    Destination IP prefix

    dest_ip_prefix

    Type: ipaddr

    Destination IP address

    dest_ip_addr

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)36

    V Show Commandsshow vlan access-list

  • Type: ipaddr

    Destination IP mask

    dest_ip_mask

    Type: ipv6prefix

    Destination IPv6 prefix

    dest_ipv6_prefix

    Type: ipv6addr

    Destination IP address

    dest_ipv6_addr

    Type: ipv6addr

    Destination IP mask

    dest_ipv6_mask

    Type: ethernet

    Destination MAC address

    mac_dest

    Type: ethernet

    Destination MAC mask

    mac_dest_wild

    Source Port operator

    lt value: 4

    Match only packets with a lower port number

    gt value: 5

    Match only packets with a greater port number

    eq value: 6

    Match only packets on a given port number

    neq value: 7

    Match only packets not on a given port number

    range value: 8

    Match only packets in the range of port numbers

    src_port_op

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 37

    V Show Commandsshow vlan access-list

  • Destination Port operator

    lt value: 4

    Match only packets with a lower port number

    gt value: 5

    Match only packets with a greater port number

    eq value: 6

    Match only packets on a given port number

    neq value: 7

    Match only packets not on a given port number

    range value: 8

    Match only packets in the range of port numbers

    dest_port_op

    Type: string

    Source port name

    src_port1_str

    Type: uinteger

    Source port number

    src_port1_num

    Type: string

    Source port name

    src_port2_str

    Type: uinteger

    Source port number

    src_port2_num

    Type: string

    Destination port name

    dest_port1_str

    Type: uinteger

    Destination port number

    dest_port1_num

    Type: string

    Destination port name

    dest_port2_str

    Type: uinteger

    Destination port number

    dest_port2_num

    Type: uinteger

    ICMP type

    icmp_type

    Type: uinteger

    ICMP code

    icmp_code

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)38

    V Show Commandsshow vlan access-list

  • Type: string

    ICMP message

    icmp_str

    Type: uinteger

    ICMP type

    icmpv6_type

    Type: uinteger

    ICMP code

    icmpv6_code

    Type: string

    ICMP message

    icmpv6_str

    Type: uinteger

    IGMP type

    igmp_type

    Type: string

    IGMP type String

    igmp_type_str

    Type: uinteger

    precedence

    precedence

    Type: string

    precedence string

    precedence_str

    Type: uinteger

    tos

    tos

    Type: string

    tos string

    tos_str

    Type: uinteger

    dscp

    dscp

    Type: string

    dscp string

    dscp_str

    Type: uinteger

    min: 1 max: 48

    capture session

    capture_session

    Type: uinteger

    min: 1 max: 48

    capture session

    global_capture_session

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 39

    V Show Commandsshow vlan access-list

  • Log

    enable value: 1

    Log the packet

    disable value: 2

    Packet loging disabled

    log

    Fragments

    enable value: 1

    Match on fragments

    disable value: 2

    No fragment match

    fragments

    URG

    enable value: 1

    TCP urg flag set

    disable value: 2

    TCP urg flag clear

    urg

    ACK

    enable value: 1

    TCP ack flag set

    disable value: 2

    TCP ack flag clear

    ack

    PSH

    enable value: 1

    TCP psh flag set

    disable value: 2

    TCP psh flag clear

    psh

    RST

    enable value: 1

    TCP rst flag set

    disable value: 2

    TCP rst flag clear

    rst

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)40

    V Show Commandsshow vlan access-list

  • SYN

    enable value: 1

    TCP syn flag set

    disable value: 2

    TCP syn flag clear

    syn

    FIN

    enable value: 1

    TCP fin flag set

    disable value: 2

    TCP fin flag clear

    fin

    ESTABLISHED

    enable value: 1

    TCP established connection

    disable value: 2

    TCP not established connection

    established

    Type: uinteger

    IPv6 flow label

    flow_label

    Type: string

    Time-range

    timerange

    Type: hex

    MAC protocol number

    eth_proto

    Type: string

    MAC protocol name

    eth_proto_str

    Type: integer

    min: 0 max: 4095

    VLAN number

    vlan

    Type: integer

    min: 0 max: 7

    CoS value

    cos

    Type: longlong

    Number of packets matching the ACL

    match_count

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 41

    V Show Commandsshow vlan access-list

  • Type: string

    Remark String

    remark

    STATISTICS

    enable value: 1

    Statistics enabled for ACL

    disable value: 2

    Statistics not enabled for ACL

    statistics

    Type: string

    Source address group

    src_addrgrp

    Type: string

    Destination address group

    dest_addrgrp

    Type: string

    Source port group

    src_portgrp

    Type: string

    Destination port group

    dest_portgrp

    Source Port operator

    lt value: 4

    Match only packets with a lower packet length

    gt value: 5

    Match only packets with a greater packet length

    eq value: 6

    Match only packets on a given packet length

    neq value: 7

    Match only packets not on a given packet length

    range value: 8

    Match only packets in the range of packet lengths

    plen_op

    Type: uinteger

    Packet length minimum

    plen1

    Type: uinteger

    packet length maximum

    plen2

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)42

    V Show Commandsshow vlan access-list

  • Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 43

    V Show Commandsshow vlan access-list

  • show vlan access-mapshow vlan access-map [ name ] [__readonly__ [TABLE_vacl vacl_name [TABLE_seqno [ seqno ][ip_ipv6_mac match_name+ [ action_drop ] [ action_log ] [ action_fwd ] [ action_capture ] [action_redirectintf]] [ statistics ]]]]

    Syntax Description Show running system informationshow

    Vlan commandsvlan

    List VLAN access mapsaccess-map

    Type: string

    length: 64

    List name

    name

    Type: string

    length: 64

    List name

    vacl_name

    __readonly__

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    seqno

    TABLE_vacl

    TABLE_seqno

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    seqno

    IP/iIPV6/MAC

    ip value: 9

    Display IP information

    mac value: 11

    MAC configuration commands

    ipv6 value: 10

    Display IPv6 information

    ip_ipv6_mac

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)44

    V Show Commandsshow vlan access-map

  • Type: string

    length: 64

    Access list name

    match_name

    DROP

    drop value: 1

    DROP action

    action_drop

    LOG

    log value: 1

    Log the packet

    action_log

    FWD

    forward value: 1

    FWD the packet

    action_fwd

    CAPTURE

    capture value: 1

    Capture the packet

    action_capture

    REDIRECT

    redirect value: 1

    Redirect the packet

    action_redirect

    Type: interface

    Interface traffic is redirected to

    intf

    STATISTICS

    enable value: 1

    Statistics enabled for Vlan access-list

    disable value: 2

    Statistics not enabled for vlan access-list

    statistics

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 45

    V Show Commandsshow vlan access-map

  • show vlan all-portsshow vlan all-ports [__readonly__ vlanshowbr-hdr TABLE_vlanbriefallports vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Show all ports on VLANall-ports

    Read Only__readonly__

    VLAN brief table formatTABLE_vlanbriefallports

    Type: uinteger

    VLAN brief header

    vlanshowbr-hdr

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid-utf

    Type: string

    VLAN brief VLAN name

    vlanshowbr-vlanname

    VLAN brief VLAN state

    active value: 1

    VLAN Active State

    suspend value: 2

    VLAN Suspended State

    vlanshowbr-vlanstate

    VLAN brief shutdown state

    shutdown value: 1

    VLAN shut state

    noshutdown value: 2

    VLAN no shut state

    vlanshowbr-shutstate

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)46

    V Show Commandsshow vlan all-ports

  • Type: interface-mrange

    Port list ifindex

    vlanshowplist-ifidx

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 47

    V Show Commandsshow vlan all-ports

  • show vlan countersshow vlan counters [__readonly__ TABLE_vlancounters vlanshowbr-vlanid [ l2_ing_ucast_b ][ l2_ing_ucast_p ] [ l2_ing_mcast_b ] [ l2_ing_mcast_p ] [ l2_ing_bcast_b ] [ l2_ing_bcast_p ][ l2_egr_ucast_b ] [ l2_egr_ucast_p ] [ l3_ucast_rcv_b ] [ l3_ucast_rcv_p ]]

    Syntax Description Show running system informationshow

    Vlan commandsvlan

    display counterscounters

    Read Only__readonly__

    vlan counters table formatTABLE_vlancounters

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: longlong

    L2 Ingress unicast octets

    l2_ing_ucast_b

    Type: longlong

    L2 Ingress unicast packets

    l2_ing_ucast_p

    Type: longlong

    L2 Ingress multicast octets

    l2_ing_mcast_b

    Type: longlong

    L2 Ingress multicast packets

    l2_ing_mcast_p

    Type: longlong

    L2 Ingress broadcast octets

    l2_ing_bcast_b

    Type: longlong

    L2 Ingress broadcast packets

    l2_ing_bcast_p

    Type: longlong

    L2 Egress unicast octets

    l2_egr_ucast_b

    Type: longlong

    L2 Egress unicast packets

    l2_egr_ucast_p

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)48

    V Show Commandsshow vlan counters

  • Type: longlong

    L3 unicast octets in

    l3_ucast_rcv_b

    Type: longlong

    L3 unicast packets in

    l3_ucast_rcv_p

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 49

    V Show Commandsshow vlan counters

  • show vlan dot1Q tag nativeshow vlan dot1Q tag native [__readonly__ tag_native_mode]

    Syntax Description Show running system informationshow

    VTP VLAN statusvlan

    Display dot1q parametersdot1Q

    Display tag parameterstag

    Display native vlan taggingnative

    Read Only__readonly__

    Native vlan tagging mode

    disabled value: 0

    Vlan dot1Q tag native is disabled

    enabled value: 1

    Vlan dot1Q tag native is enabled

    tag_native_mode

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)50

    V Show Commandsshow vlan dot1Q tag native

  • show vlan filtershow vlan filter [access-map name| vlan vlan] [__readonly__ TABLE_vlan_filter name configured_vlans]

    Syntax Description Show running system informationshow

    Vlan commandsvlan

    Information about VLAN filtersfilter

    Show the VLANs where an access-map is appliedaccess-map

    Type: string

    length: 64

    List name

    name

    Show the access-map applied to a VLANvlan

    Type: vlan

    VLAN number

    vlan

    __readonly__

    TABLE_vlan_filter

    Type: integer-mrange

    VLAN numbers

    configured_vlans

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 51

    V Show Commandsshow vlan filter

  • show vlan idshow vlan id vlan-id [__readonly__ vlanshowbr-hdr TABLE_vlanbriefid vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]vlanshowinfo-mtu-hdr TABLE_mtuinfoid vlanshowinfo-vlanid vlanshowinfo-media-typevlanshowinfo-vlanmode [ vlanshow-vlanerrbitmap ] [ vlanshowrspan-hdr1 ] [ vlanshowrspan-vlantype ][ vlanshowrspan-hdr2 ] [ vlanshowrspan-vlanbitmap ] [ pvlan-hdr ] [ pvlan-id-section ] [ pvlan-stby ][ is-vtp-manageable ] [ is-internal ] [ is-reserved ] [ is-rspan ] [ is-dynamic-gvrp ] show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Read Only__readonly__

    VLAN brief table formatTABLE_vlanbriefid

    MTU information table formatTABLE_mtuinfoid

    Type: uinteger

    VLAN brief header

    vlanshowbr-hdr

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid-utf

    Type: string

    VLAN brief VLAN name

    vlanshowbr-vlanname

    VLAN brief VLAN state

    active value: 1

    VLAN Active State

    suspend value: 2

    VLAN Suspended State

    vlanshowbr-vlanstate

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)52

    V Show Commandsshow vlan id

  • VLAN brief shutdown state

    shutdown value: 1

    VLAN shut state

    noshutdown value: 2

    VLAN no shut state

    vlanshowbr-shutstate

    Type: interface-mrange

    Port list ifindex

    vlanshowplist-ifidx

    Type: uinteger

    Vlan info mtu header

    vlanshowinfo-mtu-hdr

    Type: uinteger

    Vlan info VLAN ID

    vlanshowinfo-vlanid

    Select media type

    enet value: 1

    Vlan type Ethernet

    vlanshowinfo-media-type

    VLAN brief VLAN mode

    ce-vlan value: 0

    Classical Ethernet VLAN mode

    fabricpath-vlan value: 1

    Fabricpath VLAN mode

    vlanshowinfo-vlanmode

    Type: bitmap

    VLAN error bitmap

    vlanshow-vlanerrbitmap

    Type: uinteger

    RSPAN VLAN header for one VLAN

    vlanshowrspan-hdr1

    Type: uinteger

    RSPAN VLAN header for multiple VLANs

    vlanshowrspan-hdr2

    RSPAN VLAN one VLAN rspan or non-rspan

    rspan value: 2

    VLAN is RSPAN VLAN

    notrspan value: 1

    VLAN is not RSPAN VLAN

    vlanshowrspan-vlantype

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 53

    V Show Commandsshow vlan id

  • Type: bitmap

    RSPAN VLAN multiple VLANs

    vlanshowrspan-vlanbitmap

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Type: uinteger

    private vlan section

    pvlan-hdr

    Type: uinteger

    private id vlan section

    pvlan-id-section

    Type: uinteger

    private vlan section on standby

    pvlan-stby

    Type: bool

    VTP Manageable VLAN flag

    is-vtp-manageable

    Type: bool

    Internal VLAN flag

    is-internal

    Type: bool

    Reserved VLAN flag

    is-reserved

    Type: bool

    RSPAN VLAN flag

    is-rspan

    Type: bool

    Dynamic GVRP VLAN flag

    is-dynamic-gvrp

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)54

    V Show Commandsshow vlan id

  • show vlan id countersshow vlan id vlan-id counters [__readonly__ TABLE_vlancounters vlanshowbr-vlanid [ l2_ing_ucast_b ][ l2_ing_ucast_p ] [ l2_ing_mcast_b ] [ l2_ing_mcast_p ] [ l2_ing_bcast_b ] [ l2_ing_bcast_p ][ l2_egr_ucast_b ] [ l2_egr_ucast_p ]]

    Syntax Description Show running system informationshow

    Vlan commandsvlan

    VLAN status by VLAN idid

    display counterscounters

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Read Only__readonly__

    vlan counters table formatTABLE_vlancounters

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: longlong

    L2 Ingress unicast octets

    l2_ing_ucast_b

    Type: longlong

    L2 Ingress unicast packets

    l2_ing_ucast_p

    Type: longlong

    L2 Ingress multicast octets

    l2_ing_mcast_b

    Type: longlong

    L2 Ingress multicast packets

    l2_ing_mcast_p

    Type: longlong

    L2 Ingress broadcast octets

    l2_ing_bcast_b

    Type: longlong

    L2 Ingress broadcast packets

    l2_ing_bcast_p

    Type: longlong

    L2 Egress unicast octets

    l2_egr_ucast_b

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 55

    V Show Commandsshow vlan id counters

  • Type: longlong

    L2 Egress unicast packets

    l2_egr_ucast_p

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)56

    V Show Commandsshow vlan id counters

  • show vlan id vn-segmentshow vlan id vlan-id vn-segment [__readonly__ vlanshowinfo-segid-hdr TABLE_seginfoidvlanshowinfo-seg-vlanid vlanshowinfo-segment-id show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Show vn-segment mappingvn-segment

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Read Only__readonly__

    Segment id information table formatTABLE_seginfoid

    Type: uinteger

    Vlan info segment id header

    vlanshowinfo-segid-hdr

    Type: uinteger

    Vlan info VLAN ID

    vlanshowinfo-seg-vlanid

    Type: uinteger

    Vlan info SEGMENT ID

    vlanshowinfo-segment-id

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 57

    V Show Commandsshow vlan id vn-segment

  • show vlan mib private-vlan typeshow vlan [id vlan-id] mib private-vlan type [__readonly__ start vlan pvlan-type primary]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Private VLAN informationprivate-vlan

    Private VLAN type informationtype

    mibmib

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: uinteger

    vlan

    vlan

    normal value: 1

    normal

    primary value: 2

    Primary PVLAN

    isolated value: 3

    Isolated PVLAN

    community value: 4

    Community PVLAN

    pvlan-type

    Type: uinteger

    associated to primary

    primary

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)58

    V Show Commandsshow vlan mib private-vlan type

  • Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 59

    V Show Commandsshow vlan mib private-vlan type

  • show vlan nameshow vlan name vname [__readonly__ vlanshowbr-hdr TABLE_vlanbriefname vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]vlanshowinfo-mtu-hdr TABLE_mtuinfoname vlanshowinfo-vlanid vlanshowinfo-media-typevlanshowinfo-vlanmode [ vlanshowrspan-hdr1 ] [ vlanshowrspan-vlantype ] [ vlanshowrspan-hdr2 ][ vlanshowrspan-vlanbitmap ] show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN namename

    Type: string

    length: 128

    A VLAN name

    vname

    Read Only__readonly__

    VLAN brief table formatTABLE_vlanbriefname

    MTU information table formatTABLE_mtuinfoname

    Type: uinteger

    VLAN brief header

    vlanshowbr-hdr

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid-utf

    Type: string

    VLAN brief VLAN name

    vlanshowbr-vlanname

    VLAN brief VLAN state

    active value: 1

    VLAN Active State

    suspend value: 2

    VLAN Suspended State

    vlanshowbr-vlanstate

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)60

    V Show Commandsshow vlan name

  • VLAN brief shutdown state

    shutdown value: 1

    VLAN shut state

    noshutdown value: 2

    VLAN no shut state

    vlanshowbr-shutstate

    Type: interface-mrange

    Port list ifindex

    vlanshowplist-ifidx

    Type: uinteger

    Vlan info mtu header

    vlanshowinfo-mtu-hdr

    Type: uinteger

    Vlan info VLAN ID

    vlanshowinfo-vlanid

    Select media type

    enet value: 1

    Vlan type Ethernet

    vlanshowinfo-media-type

    VLAN brief VLAN mode

    ce-vlan value: 0

    Classical Ethernet VLAN mode

    fabricpath-vlan value: 1

    Fabricpath VLAN mode

    vlanshowinfo-vlanmode

    Type: uinteger

    RSPAN VLAN header for one VLAN

    vlanshowrspan-hdr1

    Type: uinteger

    RSPAN VLAN header for multiple VLANs

    vlanshowrspan-hdr2

    RSPAN VLAN one VLAN rspan or non-rspan

    rspan value: 2

    VLAN is RSPAN VLAN

    notrspan value: 1

    VLAN is not RSPAN VLAN

    vlanshowrspan-vlantype

    Type: bitmap

    RSPAN VLAN multiple VLANs

    vlanshowrspan-vlanbitmap

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 61

    V Show Commandsshow vlan name

  • Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)62

    V Show Commandsshow vlan name

  • show vlan private-vlanshow vlan [id vlan-id] private-vlan [__readonly__ start primary secondary pvlan-type ports]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Private VLAN informationprivate-vlan

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: uinteger

    Primary VLAN

    primary

    Type: uinteger

    Secondary VLAN

    secondary

    isolated value: 1

    Isolated PVLAN

    community value: 2

    Community PVLAN

    primary value: 3

    Primary PVLAN

    non-operational value: 4

    Non-operational PVLAN

    pvlan-type

    Type: uinteger

    Port list

    ports

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 63

    V Show Commandsshow vlan private-vlan

  • show vlan private-vlan interface hostshow vlan private-vlan interface [ if ] host [next data] [__readonly__ start interface-id secondary-vlan]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Private VLAN informationprivate-vlan

    Show interface status and informationinterface

    Type: interface-mrange

    Interface id

    if

    private-vlan hosthost

    next-entrynext

    Type: uinteger

    ignore junk value

    data

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: interface

    Interface

    interface-id

    Type: uinteger

    Secondary Vlan

    secondary-vlan

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)64

    V Show Commandsshow vlan private-vlan interface host

  • show vlan private-vlan interface mappingshow vlan private-vlan interface [ if ]mapping [__readonly__ start interface-idmulti-primary secondary-vlantwo-way]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Private VLAN informationprivate-vlan

    Show interface status and informationinterface

    Type: interface-mrange

    Interface id

    if

    private-vlan mappingmapping

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: interface

    Interface

    interface-id

    Type: bool

    multiple primay capable

    multi-primary

    Type: bitmap

    seconadry vlans bitmap

    secondary-vlan

    Type: bool

    multiple primay capable

    two-way

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 65

    V Show Commandsshow vlan private-vlan interface mapping

  • show vlan private-vlan interface modeshow vlan private-vlan interface [ if ] mode [next data] [__readonly__ start interface-id port-mode]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Private VLAN informationprivate-vlan

    Show interface status and informationinterface

    Type: interface-mrange

    Interface id

    if

    private-vlan port modemode

    next-entrynext

    Type: uinteger

    ignore junk value

    data

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: interface

    Interface

    interface-id

    not-private-vlan value: 1

    private-vlan-host value: 2

    private-vlan-promiscuous value: 3

    private-vlan-trunk value: 4

    port-mode

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)66

    V Show Commandsshow vlan private-vlan interface mode

  • show vlan private-vlan interface trunkshow vlan private-vlan interface [ if ] trunk [__readonly__ start interface-id dynamic-state encap-typenative-vlan secondary-vlans normal-vlans dynamic-status encap-oper-type]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Private VLAN informationprivate-vlan

    Show interface status and informationinterface

    Type: interface-mrange

    Interface id

    if

    pvlan trunktrunk

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: interface

    Interface

    interface-id

    Type: uinteger

    dynamic state

    dynamic-state

    Type: uinteger

    encapsulation type

    encap-type

    Type: uinteger

    native vlan

    native-vlan

    Type: bitmap

    secondary vlans

    secondary-vlans

    Type: bitmap

    normal vlans

    normal-vlans

    Type: uinteger

    dynamic status

    dynamic-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 67

    V Show Commandsshow vlan private-vlan interface trunk

  • Type: uinteger

    encap oper type

    encap-oper-type

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)68

    V Show Commandsshow vlan private-vlan interface trunk

  • show vlan private-vlan mappingshow vlan [id vlan-id] private-vlan mapping [next data] [__readonly__ start vlan-id primary]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Private VLAN informationprivate-vlan

    private-vlan mappingmapping

    next-entrynext

    Type: uinteger

    ignore junk value

    data

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: uinteger

    secondary

    vlan-id

    Type: uinteger

    primary-vlan

    primary

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 69

    V Show Commandsshow vlan private-vlan mapping

  • show vlan private-vlan typeshow vlan [id vlan-id] private-vlan type [__readonly__ start vlan pvlan-type primary]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Private VLAN informationprivate-vlan

    Private VLAN type informationtype

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: uinteger

    vlan

    vlan

    isolated value: 1

    Isolated PVLAN

    community value: 2

    Community PVLAN

    primary value: 3

    Primary PVLAN

    non-operational value: 4

    Non-operational PVLAN

    normal value: 5

    normal

    pvlan-type

    Type: uinteger

    associated to primary

    primary

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)70

    V Show Commandsshow vlan private-vlan type

  • Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 71

    V Show Commandsshow vlan private-vlan type

  • show vlan reservedshow vlan reserved [__readonly__ TABLE_reserved ivusage-vlanid ivusage-desc show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Internal reserved VLANsreserved

    Read Only__readonly__

    Internal reserved VLAN table formatTABLE_reserved

    Type: uinteger

    internal vlan usage VLAN id

    ivusage-vlanid

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)72

    V Show Commandsshow vlan reserved

  • Multicast VLAN start value: 1

    Multicast VLAN start

    Multicast VLAN end value: 2

    Multicast VLAN end

    Online diagnostics vlan1 value: 3

    online diagnostics vlan1

    Online diagnostics vlan2 value: 4

    online diagnostics vlan2

    Online diagnostics vlan3 value: 5

    online diagnostics vlan3

    Online diagnostics vlan4 value: 6

    online diagnostics vlan4

    Unused reserved VLAN lower start value: 7

    Unused VLAN lower start

    Unused reserved VLAN lower end value: 8

    Unused VLAN lower end

    Satellite VLAN value: 9

    Satellite VLAN

    Unused reserved VLAN upper start value: 10

    Unused VLAN upper start

    Unused reserved VLAN upper end value: 11

    Unused VLAN upper end

    Reserved value: 12

    Reserved

    ivusage-desc

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 73

    V Show Commandsshow vlan reserved

  • show vlan xbriefshow vlan xbrief [__readonly__ vlanshowbr-hdr TABLE_vlanbriefxbrief vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    All VLAN status in briefxbrief

    Read Only__readonly__

    VLAN brief table formatTABLE_vlanbriefxbrief

    Type: uinteger

    VLAN brief header

    vlanshowbr-hdr

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid-utf

    Type: string

    VLAN brief VLAN name

    vlanshowbr-vlanname

    VLAN brief VLAN state

    active value: 1

    VLAN Active State

    suspend value: 2

    VLAN Suspended State

    vlanshowbr-vlanstate

    VLAN brief shutdown state

    shutdown value: 1

    VLAN shut state

    noshutdown value: 2

    VLAN no shut state

    vlanshowbr-shutstate

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)74

    V Show Commandsshow vlan xbrief

  • Type: interface-mrange

    Port list ifindex

    vlanshowplist-ifidx

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 75

    V Show Commandsshow vlan xbrief

  • show vlan xsummaryshow vlan xsummary [__readonly__ vlansum-vtp-vlan vlansum-ext-vlan vlansum-all-vlanvlansum-max-supported-vlan show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN summary informationxsummary

    Read Only__readonly__

    Type: uinteger

    Show vlan summary Number of normal vlans

    vlansum-vtp-vlan

    Type: uinteger

    Show vlan summary Number of extended vlans

    vlansum-ext-vlan

    Type: uinteger

    Show vlan summary Total

    vlansum-all-vlan

    Type: uinteger

    Show vlan summary Max supported vlans

    vlansum-max-supported-vlan

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)76

    V Show Commandsshow vlan xsummary

  • show vpc (mcecm)show vpc {vpc-number| brief vpc vpc-number} [__readonly__ [ vpc-hdr ] [ vpc-is-es ] [ vpc-not-es ][TABLE_vpc vpc-id vpc-ifindex vpc-port-state vpc-thru-peerlink vpc-consistency [ vpc-consistency-reason ][ vpc-consistency-status ] up-vlan-bitset es-attr] vpc-end]

    Syntax Description Show running system informationshow

    Virtual Port Channel configurationvpc

    Brief display of vPC statusbrief

    Type: integer

    min: 1 max: 4096

    Enter a Virtual Port Channel number

    vpc-number

    Read Only__readonly__

    Type: string

    Start of vPC table

    vpc-hdr

    Type: string

    Flag to indicate vPC+ complex

    vpc-is-es

    Type: string

    Flag to indicate vPC complex

    vpc-not-es

    vPC tableTABLE_vpc

    Type: uinteger

    vPC id

    vpc-id

    Type: string

    vPC ifindex

    vpc-ifindex

    Type: integer

    vPC port state

    vpc-port-state

    Type: integer

    vPC Routing through peerlink

    vpc-thru-peerlink

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 77

    V Show Commandsshow vpc (mcecm)

  • vPC global configuration consistency

    consistent value: 1

    vPC global configuration consistent

    inconsistent value: 2

    vPC global configuration inconsistent

    not-applicable value: 3

    vPC configuration not applicable

    vpc-consistency

    Type: string

    vPC consistency reason

    vpc-consistency-reason

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)78

    V Show Commandsshow vpc (mcecm)

  • vpc-consistency-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 79

    V Show Commandsshow vpc (mcecm)

  • vPC consistency reason

    SUCCESS value: 0x00000000

    SUCCESS

    INVALID value: 0x00000001

    INVALID

    SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F

    SYSERR_MCECM_COMPAT_FAILED

    SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025

    SYSERR_MCECM_PEER_NOT_CFG

    SYSERR_MCECM_MCT_DOWN value: 0x41B7002A

    SYSERR_MCECM_MCT_DOWN

    SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035

    SYSERR_MCECM_MCT_NOT_UP

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH

    SYSERR_PCM_INVALID value: 0x402B0004

    SYSERR_PCM_INVALID

    SYSERR_PCM_INTERNAL value: 0x402B0003

    SYSERR_PCM_INTERNAL

    SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A

    SYSERR_STP_COMPAT_CHECK_FAILURE

    SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)80

    V Show Commandsshow vpc (mcecm)

  • SYSERR_SVI_COMPAT_CHECK_FAILURE

    SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050

    SYSERR_MCECM_TYPE_CHECK_BYPASSED

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH

    Type: string

    vPC UP VLAN bitset

    up-vlan-bitset

    Type: string

    vPC+ attributes

    es-attr

    Type: string

    End of table

    vpc-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 81

    V Show Commandsshow vpc (mcecm)

  • show vpc (mcecm)show vpc [brief] [__readonly__ vpc-domain-id [ vpc-l2mp-switch-id ] vpc-peer-status vpc-peer-status-reasonvpc-peer-keepalive-status [ vpc-peer-l2mp-status ] vpc-peer-consistency [ vpc-peer-consistency-reason ][ vpc-per-vlan-peer-consistency ] vpc-peer-consistency-status vpc-type-2-consistency[ vpc-type-2-consistency-reason ] vpc-type-2-consistency-status vpc-role num-of-vpcs [ track-obj ][ peer-gateway ] [ peer-gateway-excluded-vlans ] dual-active-excluded-vlansvpc-graceful-consistency-check-status [ vpc-auto-recovery-status ] [ vpc-scale-high-status ][ fp-enhanced-load-balancing ] [ vpc-per-vlan-peer-consistency ] vpc-peer-link-hdr [TABLE_peerlinkpeer-link-id peerlink-ifindex peer-link-port-state peer-up-vlan-bitset] vpc-end vpc-hdr [ vpc-is-es ] [ vpc-not-es ][TABLE_vpc vpc-id vpc-ifindex vpc-port-state vpc-thru-peerlink vpc-consistency [ vpc-consistency-reason ][ vpc-consistency-status ] up-vlan-bitset es-attr] vpc-end]

    Syntax Description Show running system informationshow

    Virtual Port Channel configurationvpc

    Brief display of vPC statusbrief

    Read Only__readonly__

    vPC peerlink tableTABLE_peerlink

    vPC tableTABLE_vpc

    Type: string

    vPC domain id

    vpc-domain-id

    Type: uinteger

    vPC+ switch ID

    vpc-l2mp-switch-id

    vPC peer status

    peer-not-configured value: 1

    vPC peer-link not configured

    peer-not-found value: 2

    vPC peer not found

    peer-ok value: 3

    vPC peer adjacency ok

    peer-link-down value: 4

    vPC peer link down

    vpc-peer-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)82

    V Show Commandsshow vpc (mcecm)

  • vPC peer status reason

    SUCCESS value: 0x00000000

    SUCCESS

    SYSERR_MCECM_PEER_UNRCH value: 0x41B70034

    SYSERR_MCECM_PEER_UNRCH

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_ELECTION_ERROR value: 0x41B70037

    SYSERR_MCECM_ELECTION_ERROR

    SYSERR_MCECM_OOB_NOT_OPERATIONAL value: 0x41B7004D

    SYSERR_MCECM_OOB_NOT_OPERATIONAL

    vpc-peer-status-reason

    vpc peer keepalive status

    disabled value: 1

    vpc peer keepalive disabled

    peer-alive value: 2

    vpc peer keepalive received

    peer-not-alive value: 3

    vpc peer keepalive not received

    peer-alive-domain-mismatch value: 4

    vpc peer keepalive received,domainID mismatch

    suspended value: 5

    vpc peer keepalive suspended for ISSU

    not-operational value: 6

    vpc peer keepalive not operational

    suspended-vrf value: 7

    vpc peer keepalive suspended: invalid vrf

    misconfigured value: 8

    vpc peer keepalive misconfigured

    vpc-peer-keepalive-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 83

    V Show Commandsshow vpc (mcecm)

  • vPC fabricpath status

    unknown value: 0

    vpc fabricpath peer is unknown

    alive value: 1

    vpc peer is reachable through fabricpath network

    dead value: 2

    vpc peer is unreachable through fabricpath network

    vpc-peer-l2mp-status

    vPC role

    none-established value: 0

    no role established

    primary value: 2

    vPC primary primary

    primary-secondary value: 1

    vPC primary secondary

    secondary-primary value: 3

    vPC secondary primary

    secondary value: 4

    vPC secondary secondary

    vpc-role

    Type: integer

    Peer gateway status

    peer-gateway

    Type: string

    peer-gateway excluded VLANs

    peer-gateway-excluded-vlans

    Type: string

    dual-active excluded VLANs

    dual-active-excluded-vlans

    Type: integer

    Fabricpath enhanced load balancing status

    fp-enhanced-load-balancing

    Type: string

    Number of vPCs configured

    num-of-vpcs

    Type: string

    Track object for vPC

    track-obj

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)84

    V Show Commandsshow vpc (mcecm)

  • vPC graceful consistency check

    enabled value: 1

    vPC graceful consistency check enabled

    disabled-user value: 2

    vPC graceful check user disabled

    disabled-peer value: 3

    vPC graceful check peer disabled

    vpc-graceful-consistency-check-status

    vPC global configuration consistency

    consistent value: 1

    vPC global configuration consistent

    inconsistent value: 2

    vPC global configuration inconsistent

    not-applicable value: 3

    vPC configuration not applicable

    vpc-consistency

    Type: string

    vPC consistency reason

    vpc-consistency-reason

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 85

    V Show Commandsshow vpc (mcecm)

  • vpc-consistency-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)86

    V Show Commandsshow vpc (mcecm)

  • vPC consistency reason

    SUCCESS value: 0x00000000

    SUCCESS

    INVALID value: 0x00000001

    INVALID

    SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F

    SYSERR_MCECM_COMPAT_FAILED

    SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025

    SYSERR_MCECM_PEER_NOT_CFG

    SYSERR_MCECM_MCT_DOWN value: 0x41B7002A

    SYSERR_MCECM_MCT_DOWN

    SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035

    SYSERR_MCECM_MCT_NOT_UP

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH

    SYSERR_PCM_INVALID value: 0x402B0004

    SYSERR_PCM_INVALID

    SYSERR_PCM_INTERNAL value: 0x402B0003

    SYSERR_PCM_INTERNAL

    SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A

    SYSERR_STP_COMPAT_CHECK_FAILURE

    SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 87

    V Show Commandsshow vpc (mcecm)

  • SYSERR_SVI_COMPAT_CHECK_FAILURE

    SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050

    SYSERR_MCECM_TYPE_CHECK_BYPASSED

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH

    vPC global configuration consistency

    consistent value: 1

    vPC global configuration consistent

    inconsistent value: 2

    vPC global configuration inconsistent

    not-applicable value: 3

    vPC configuration not applicable

    vpc-peer-consistency

    Type: string

    vPC consistency reason

    vpc-peer-consistency-reason

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)88

    V Show Commandsshow vpc (mcecm)

  • vpc-peer-consistency-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 89

    V Show Commandsshow vpc (mcecm)

  • vPC consistency reason

    SUCCESS value: 0x00000000

    SUCCESS

    INVALID value: 0x00000001

    INVALID

    SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F

    SYSERR_MCECM_COMPAT_FAILED

    SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025

    SYSERR_MCECM_PEER_NOT_CFG

    SYSERR_MCECM_MCT_DOWN value: 0x41B7002A

    SYSERR_MCECM_MCT_DOWN

    SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035

    SYSERR_MCECM_MCT_NOT_UP

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH

    SYSERR_PCM_INVALID value: 0x402B0004

    SYSERR_PCM_INVALID

    SYSERR_PCM_INTERNAL value: 0x402B0003

    SYSERR_PCM_INTERNAL

    SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A

    SYSERR_STP_COMPAT_CHECK_FAILURE

    SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)90

    V Show Commandsshow vpc (mcecm)

  • SYSERR_SVI_COMPAT_CHECK_FAILURE

    SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050

    SYSERR_MCECM_TYPE_CHECK_BYPASSED

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH

    vPC per-vlan global configuration consistency

    consistent value: 1

    vPC per-vlan global configuration consistent

    inconsistent value: 2

    vPC per-vlan global configuration inconsistent

    vpc-per-vlan-peer-consistency

    vPC type-2 configuration consistency status

    consistent value: 1

    vPC type-2 compat check succeeded

    inconsistent value: 2

    vPC type-2 compat check failed

    vpc-type-2-consistency

    Type: string

    vPC type-2 configuration consistency reason

    vpc-type-2-consistency-reason

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 91

    V Show Commandsshow vpc (mcecm)

  • vpc-type-2-consistency-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)92

    V Show Commandsshow vpc (mcecm)

  • vPC type-2 configuration consistency status

    SUCCESS value: 0x00000000

    SUCCESS

    INVALID value: 0x00000001

    INVALID

    SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F

    SYSERR_MCECM_COMPAT_FAILED

    SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025

    SYSERR_MCECM_PEER_NOT_CFG

    SYSERR_MCECM_MCT_DOWN value: 0x41B7002A

    SYSERR_MCECM_MCT_DOWN

    SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035

    SYSERR_MCECM_MCT_NOT_UP

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH

    SYSERR_PCM_INVALID value: 0x402B0004

    SYSERR_PCM_INVALID

    SYSERR_PCM_INTERNAL value: 0x402B0003

    SYSERR_PCM_INTERNAL

    SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A

    SYSERR_STP_COMPAT_CHECK_FAILURE

    SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 93

    V Show Commandsshow vpc (mcecm)

  • SYSERR_SVI_COMPAT_CHECK_FAILURE

    SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050

    SYSERR_MCECM_TYPE_CHECK_BYPASSED

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH

    vPC scale high status

    enabled value: 1

    vPC scale high status enabled

    disabled-user value: 2

    vPC scale high status user disabled

    disabled-peer value: 3

    vPC scale high status peer disabled

    vpc-scale-high-status

    Type: string

    Start of vPC table

    vpc-hdr

    Type: string

    Flag to indicate vPC+ complex

    vpc-is-es

    Type: string

    Flag to indicate vPC complex

    vpc-not-es

    Type: string

    Start of vPC peer-link table

    vpc-peer-link-hdr

    Type: integer

    vPC Routing through peerlink

    vpc-thru-peerlink

    Type: integer

    vPC port state

    vpc-port-state

    Type: string

    End of table

    vpc-end

    Type: uinteger

    vPC id

    vpc-id

    Type: string

    vPC ifindex

    vpc-ifindex

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)94

    V Show Commandsshow vpc (mcecm)

  • Type: uinteger

    peer link id

    peer-link-id

    Type: string

    peer link ifindex

    peerlink-ifindex

    Type: integer

    peer-link port state

    peer-link-port-state

    Type: string

    peer link UP VLAN bitset

    peer-up-vlan-bitset

    Type: string

    vPC UP VLAN bitset

    up-vlan-bitset

    Type: string

    vPC+ attributes

    es-attr

    Type: string

    Auto-recovery status

    vpc-auto-recovery-status

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 95

    V Show Commandsshow vpc (mcecm)

  • show vpc consistency-parametersshow vpc consistency-parameters {global| interface if| vpc vpc-num} [__readonly__TABLE_vpc_consistency vpc-param-name vpc-param-type vpc-param-local-val vpc-param-peer-val]

    Syntax Description Show running system informationshow

    Virtual Port Channel configurationvpc

    Show vPC Consistency Parametersconsistency-parameters

    Global Parametersglobal

    Specify interfaceinterface

    Type: integer

    min: 1 max: 4096

    Enter a Virtual Port Channel number

    vpc-num

    Read Only__readonly__

    vPC tableTABLE_vpc_consistency

    Type: stringvpc-param-name

    Type: stringvpc-param-type

    Type: stringvpc-param-local-val

    Type: stringvpc-param-peer-val

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)96

    V Show Commandsshow vpc consistency-parameters

  • show vpc consistency-parameters vlansshow vpc consistency-parameters vlans [__readonly__ TABLE_vpc_consistency vpc-param-namevpc-param-type [ reason_code ] [ syserr ] vpc-pass-vlans [ reason_code ]]

    Syntax Description Show running system informationshow

    Virtual Port Channel configurationvpc

    Show vPC Consistency Parametersconsistency-parameters

    vlansvlans

    Read Only__readonly__

    vPC tableTABLE_vpc_consistency

    Type: stringvpc-param-name

    Type: stringvpc-param-type

    Type: stringvpc-pass-vlans

    Type: string

    vPC consistency reason

    syserr

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 97

    V Show Commandsshow vpc consistency-parameters vlans

  • reason_code

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)98

    V Show Commandsshow vpc consistency-parameters vlans

  • vPC consistency reason

    SUCCESS value: 0x00000000

    SUCCESS

    INVALID value: 0x00000001

    INVALID

    SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F

    SYSERR_MCECM_COMPAT_FAILED

    SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025

    SYSERR_MCECM_PEER_NOT_CFG

    SYSERR_MCECM_MCT_DOWN value: 0x41B7002A

    SYSERR_MCECM_MCT_DOWN

    SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035

    SYSERR_MCECM_MCT_NOT_UP

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH

    SYSERR_PCM_INVALID value: 0x402B0004

    SYSERR_PCM_INVALID

    SYSERR_PCM_INTERNAL value: 0x402B0003

    SYSERR_PCM_INTERNAL

    SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A

    SYSERR_STP_COMPAT_CHECK_FAILURE

    SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 99

    V Show Commandsshow vpc consistency-parameters vlans

  • SYSERR_SVI_COMPAT_CHECK_FAILURE

    SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050

    SYSERR_MCECM_TYPE_CHECK_BYPASSED

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)100

    V Show Commandsshow vpc consistency-parameters vlans

  • show vpc orphan-portsshow vpc orphan-ports [__readonly__ TABLE_orphan_ports vpc-vlan vpc-orphan-ports]

    Syntax Description Show running system informationshow

    Virtual Port Channel configurationvpc

    Show ports that are not part of vPC but have common VLANsorphan-ports

    Read Only__readonly__

    vPC orphan ports tableTABLE_orphan_ports

    Type: stringvpc-vlan

    Type: stringvpc-orphan-ports

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 101

    V Show Commandsshow vpc orphan-ports

  • show vpc peer-keepaliveshow vpc peer-keepalive [__readonly__ vpc-peer-keepalive-status vpc-keepalive-destvpc-keepalive-send-interface vpc-keepalive-receive-interface vpc-keepalive-send-tstampvpc-keepalive-receive-tstamp vpc-peer-keepalive-up-time vpc-keepalive-send-status v


Top Related