TECHNOFLEX CORPORATION www.technoflex.co.jp
Flexible Metal HoseフレキシブルメタルホースT E C H N O F L E X ’ S Q U A L I T Y P R O D U C T S
本社111-0051 1 5-1
Telephone 03-5822-3211 Facsimile 03-5822-3219
Headquarters 5-1,kuramae 1-chome,Taitou-ku,Tokyo 111-0051 Japan Telephone +81-3-5822-3211 Facsimile +81-3-5822-3219
東京営業部111-0051 1 5-1
Telephone 03-5822-3251 Facsimile 03-5822-3261
Telephone 03-5822-3252 Facsimile 03-5822-3262
Telephone 03-5822-3254 Facsimile 03-5822-3264
Telephone 03-5822-3253 Facsimile 03-5822-3263
451-0025
Telephone 052-522-0220 Facsimile 052-532-1030
981-8007 Telephone 022-771-7411 Facsimile 022-776-2155
003-0834 5-1549 303
Telephone 011-875-1133 Facsimile 011-875-1030
大阪営業部531-0076 7-12
Telephone 06-6344-3911 Facsimile 06-6344-7211
Telephone 06-6344-3913 Facsimile 06-6344-4222
Telephone 06-6344-3912 Facsimile 06-6344-7212
813-0034 14-1 Telephone 092-622-6811 Facsimile 092-622-9680
700-0976 35-102105
Telephone 086-242-2622 Facsimile 086-241-0633
730-0036 4-31605
Telephone 082-545-6061 Facsimile 082-545-6091
真空機器営業部
111-0051 1 5-1 Telephone 03-5822-3255 Facsimile 03-5822-3265
869-1232 272-11 Telephone 096-293-1551 Facsimile 096-213-4070
FM-1407-22
Contents
テクノフレックスの
フレキシブルメタルホースは
適合型式の選定
適合一覧表
チューブとブレイド
チューブとブレイドの寸法と性能
F110
F115
F118
F121/F122・F151/152
F123/F124・F153/154
F128/F129・F158/159
F130(コネクター 21/10K)
F138(コネクター 21/10K)
FEATURE OF TECHNOFLEX
FLEXIBLE METAL HOSES
SELECTION OF APPLICABLE TYPE
LIST OF APPLICATIONS
TUBES AND BRAIDS
DIMENSION AND PERFORMANCE
OF THE TUBE AND BRAID
F110 FLEXIBLE METAL HOSE
F115 FLEXIBLE METAL HOSE
F118 FLEXIBLE METAL HOSE
F121/F122・F151/F152 FLEXIBLE METAL HOSE
F123/F124・F153/F154 FLEXIBLE METAL HOSE
F128/F129・F158/F159 FLEXIBLE METAL HOSE
F130 FLEXIBLE METAL HOSE
F138 FLEXIBLE METAL HOSE
4
5
6
10
12
14
15
16
17
18
19
20
F135(コネクター21/20K)
F140
B710/B720(ビッグジョイント)
E410/E420
F155・F165・T670
S210
S215
S220
S221
S222
S225
S227・S228
S230・S270
C310
C315
F135 FLEXIBLE METAL HOSE
F140 FLEXIBLE METAL HOSE
B710/B720 PUMP CONNECTOR
E410/E420 EXPANSION JOINT
F155・F165・T670 FLEXIBLE METAL HOSE
S210 FLEXIBLE METAL HOSE
S215 FLEXIBLE METAL HOSE
S220 FLEXIBLE METAL HOSE
S221 FLEXIBLE METAL HOSE
S222 FLEXIBLE METAL HOSE
S225 FLEXIBLE METAL HOSE
S227・S228 FLEXIBLE METAL HOSE
S230・S270 FLEXIBLE METAL HOSE
C310 FLEXIBLE METAL HOSE
C315 FLEXIBLE METAL HOSE
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
C320・C325
C330・C340
ホースの補強
フレキシブルメタルホースの圧力損失
動きのある配管のホース長さ
建築設備配管に於ける耐震措置および
建物エキスパンションジョイント部 配管要項
ステンレス鋼の耐食表
鋼管の寸法と質量
ガスケット(パッキン)適合一覧表
フランジの基本寸法
飽和蒸気とパイプの伸びの表
単位換算表
正しい取り付け方
製品のお取扱いについて
C320・C325 FLEXIBLE METAL HOSE
C330・C340 FLEXIBLE METAL HOSE
ACCESSORIES AND OTHERS
PRESSURE LOSS OF THE HOSE
LENGTH OF HOSE FOR PIPING WITH MOVEMENT
THE INSTALLATION AGAINST AN
EARTHQUAKE OF CONSTRUCTION PIPING
ANTI-CORROSION TABLE OF STAINLESS STEEL
DIMENSION AND MASS OF STEEL PIPES
ACCEPTABLE TABLE OF GASKET
BASIC DIMENSIONS OF FLANGES
SATURATED STEAM AND THERMAL EXPANSION OF PIPE
CONVERSIONS
DO'S AND DON'TS
CAUTIONS AND HANDLING
36
37
38
39
40
45
47
51
52
54
55
56
57
T E C H N O F L E X品質と実績を誇りに21世紀社会へさらなる価値を提供To supply further value to the 21st century society with high quality andaccumulated experience.
テクノフレックスのフレキシブルメタルホースはFEATURE OF TECHNOFLEX CORPORATION FLEXIBLE METAL HOSES
FE
AT
UR
E
OF
T
EC
HN
OF
LE
X
&
FL
EX
IB
LE
M
ET
AL
H
OS
ES
SE
LE
CT
IO
N
OF
A
PP
LI
CA
BL
E
TY
PE
4 5
6A 350A 400A 20
ISO9001 14001
高耐熱性能SUS304 SUS316L
-193 450 600 0 350
高耐圧性能
350A 1MPa 1.5経年変化なし
SUS316L
1.
2.
3.
4.
5.
豊富なバリエーション
ハイクオリティー
高性能
リサイクルが可能です
安心のフォロー体制
○
○
○
1
2
3
We can manufacture hose having an 6A to 350A, and 400A over. We deliver the optimum hoses which match the conditions of usage from construction facilities to vacuum and nuclear applications.
We have ISO9001 and ISO14001. Richly experienced engineers design products.
IT EXCELS IN HEAT RESISTANCETubes standard material are 304SS and 316LSS.It is possible to cover a temperature range of -193 450 (600 )
IT WITHSTANDS HIGH PRESSURETubes made from stainless steel are durable to heat and weather, compared with rubber and synthetic hoses.
NO CHANGES WITH TIMEThe stainless steel of the main body excels in weather resistance, and actually, there are no deterioration or ageing.There are no troubles such as cracks caused by ageing or surface layer peeling.However, severe corrosion with the system requirements and the crack by metal fatigue might be caused.
The main part of a product is recyclable stainless steel.
From the studying stage of product specifications to the post-delivery after-care, we have a service system to satisfy you through our nationwide sales network.
1.
2.
3.
4.
5.
ABUNDANT VARIATION
HIGH QUALITY
THE QUALITY IS STABLE
RECYCLABLE MATERIAL
SECURITY BY FOLLOW-UP SYSTEM
○
○
○
1
2
3
Please inform us of the following operating conditions. We will select the optimum type for you.
適合型式の選定SELECTION OF APPLICABLE TYPE
U
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
口径、全長
接続金具(口金)
流体
温度と圧力
用途
配管の形態
動きの有無
各部材質
外装の有無
適用法規
数量、納期
その他
In case they are predetermined.
Standard and nominal designation of the screws, and the standard, nominal diameter, and pressure rating of the flange.
Name of fluid, and concentration. If the material of the connection piping is known, the selection of material will not be required.
On the normal and maximum values. In case there is pressure fluctuation, the range of fluctuation.
EXAMPLE: Thermal expansion / absorption of pipng. Isolation of mechanical vibration, etc.
EXAMPLE: U-shape sagging pipe.
In case there are movements, please give the value of movement, direction, and frequency. Also indicate the expected life.
If there is any designation, please let us know.
If sheathing such as corrosion-resistance and thermal insulation are required, please let us know.
In particular, if there is any designation.
Fluid speed, outside environmental conditions(corrosivity, temperature, pressure), amount of small leakage at the time of high vacuum.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
NOMINAL DIAMETER. TOTAL LENGTH
CONNECTION FITTINGS(MOUTHPIECE)
FLUID
TEMPERATURE AND PRESSURE
APPLICATION
SHAPE OF PIPING
WHETHER MOVEMENT EXISTS OR NOT
MATERIAL OF EACH PART
WHETHER SHEATHING EXISTS OR NOT
APPLICABLE LAWS AND REGULATIONS
QUANTITY, DELIVERY
OTHERS
JIS10KSUS316/SUS316L
JIS20KSUS304 SUS316/SUS316L
2 100A
1835
350
F138 JIS10K32A
50A21 10K
1.4MPa 204
JIS10KSUS316
JIS ANSI
50A
JIS ANSI
JIS ANSI
JIS10K
32A
20A50A 100
S221 15A50A
JIS B 020329
30
31
32
33
33
34
35
36
36
37
37
1.0MPa2
15A350A
S228 32
+JIS B 0203
LI
ST
O
F
AP
PL
IC
AT
IO
NS
LI
ST
O
F
AP
PL
IC
AT
IO
NS
6 7
適合一覧表
JIS10K
JIS20K
F110
F115
F121
F122
F123
F124
F128
F129
F155
( )
F130
F135
F140
F150
F165
T670
15A100A
20A300A
10A100A
10A100A
10A150A
10A150A
65A350A
65A350A
10A350A
32A300A
32A200A
40A350A
10A350A
15A200A
21 10K
21 20K
JIS5K/JIS10KSUS304
JIS5K/JIS10K/ANSI150Lb
JIS ANSI
50A
JIS ANSI
400A
JIS ANSI JPI150Lb
JIS ANSI
JIS ANSI
2
JIS ANSI
JIS
JIS ANSI
400A
14
15
17
16
17
18
18
19
19
25
20
21
20
22
171819
25
25
1.0MPa
1.0MPa1
1.0MPa1
1.0MPa1
1.0MPa1
1.0MPa1
1.0MPa1
1.0MPa1
1.4MPa
2.8MPa
1.0MPa
1.0MPa1
1.0MPa1
1.0MPa1
1
350
3503
F118 20A50A 1.0MPa
3503
3503
3503
80
-19680
2703
3503
3503
204
204
1004
3503
名称 接続金具 口径 常用圧力(常温基準)
最高使用温度
用途例 備考 頁形状型番
JIS10K
B710B720
E410E420
S210
S215
S220
S222
S225
S227
C330
C325
S230
S270
C310
C315
C320
C340
50A300A
20A200A
15A50A
8A25A
8A65A
6A100A
6A65A
8A65A
8A80A
25A50A
6A100A
15A150A
8A50A
6A50A
6A200A
JIS10K/JIS20K2
JIS10KSUS316L/304L
/JIS B 2352
FCMBJIS B 0203
SUS304
ISO,NPT
+JIS B 0203
JIS B 0203ISO,NPT
JIS B 0203ISO,NPT
JIS B 0203ISO,NPT
JIS,ANSI
JIS,ANSI
ISO,IDF
+JIS B 0203ISO,NPT
JIS B 0203
JIS B 020350A
23
24
26
27
28
37
36
34
35
36
37
1.0/2.0MPa
1.0MPa
1.0MPa
1.0MPa1
1.0MPa1
1.0MPa1
1.0MPa1
1.0MPa1
1.0MPa1
1.0MPa1
1.0MPa1
1.0MPa1
2204
100
35035
3503
805
5
3503
3503
6A65A
1.0MPa1
3503
3503
3503
5
5
3
3
名称 接続金具 口径 常用圧力(常温基準)
最高使用温度
用途例 備考 頁形状型番
1. 2. 3.4. 5.
1.0MPa2
1.0MPa1
1.0MPa2
20A50A 100
FEMALETHREADS
S221 15A50A
CORE UNIONS ENDALIGNMENT
UNEVEN SINKING OF LAND
WITH TAPER THREADS
FOR WATER AND HOT WATER 29
30
31
32
33
33
34
35
36
36
37
37
1.0MPa2
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
1.0MPa< 2
1.0MPa< 2
1.0MPa< 1
1.0MPa< 1
1.0MPa< 1
15A350A
321.0MPa< 1
S228
This is rough selection table.Please check for detailes.
LI
ST
O
F
AP
PL
IC
AT
IO
NS
LI
ST
O
F
AP
PL
IC
AT
IO
NS
8 9
LIST OF APPLICATIONS
ISOLATION OF VIBRATION FROM
FIRE-EXTINGUISHING PUMP
ISOLATION OF VIBRATION FROM
FIRE-EXTINGUISHING PUMP
1835
F138
350
FLANGE(JIS10K)
32A50A
FIRE-EXTINGUISHINGEQUIPMENTFLEXIBLE JOINT
JIS10K FLANGE
316SS IN FLUID SURFACE1.4MPa 20
4ISOLATION OF VIBRATION FROM
FIRE-EXTINGUISHING PUMP
LAPPEDFLANGE
FLANGE
FIXEDFLANGE
LAPPEDFLANGE
FIXEDFLANGE
LAPPEDFLANGE
LAPPEDFLANGE
FIXEDFLANGE
LAPPED OR FIXED FLANGE
FLANGE(JIS10K)
FLANGE(JIS20K)
LAPPED OR FIXED FLANGE
LAPPED OR FIXED FLANGE
LAPPED OR FIXED FLANGE
LAPPED OR FIXED FLANGE
F110
F115
F118
F121
F122
F123
F124
F128
F129
F155
( )
F130
F135
F140
F150
F165
T670
15A100A
20A300A
10A100A
10A100A
10A150A
10A150A
65A350A
65A350A
10A350A
32A300A
32A200A
40A350A
10A350A
15A200A
15A350A
FLANGE END
NON WELDING TYPEPUMP CONNECTOR
FLANGE END
FLANGE END
FLANGE END
FLANGE END
FLANGE END
FLANGE END
JACKET TYPE
FIRE-EXTINGUISHINGEQUIPMENTFLEXIBLE JOINT
FIRE-EXTINGUISHINGEQUIPMENTFLEXIBLE JOINT
OFFICIALLY CERTIFIEDFLEXIBLE JOINT (JAPAN)
FLANGE ENDLAYING UNDER THEGROUND TYPE
FOR COOLANTPIPING
FLUORO-PLASTICLINED TUBES
ALIGNMENT
UNEVEN SINKING OF LAND
ALIGNMENT
UNEVEN SINKING OF LAND
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
ISOLATION OF VIBRATION FROM MACHINEALIGNMENTUNEVEN SINKING OF LANDABSORPTION OF HEAT CONTRACTIONAND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LAND
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LANDABSORPTION OF HEAT CONTRACTIONAND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LANDABSORPTION OF HEAT CONTRACTIONAND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LANDABSORPTION OF HEAT CONTRACTIONAND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LANDABSORPTION OF HEAT CONTRACTIONAND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LAND
ISOLATION OF VIBRATION FROM
MACHINE
ALIGNMENT
UNEVEN SINKING OF LAND
ALIGNMENT
UNEVEN SINKING OF LANDABSORPTION OF HEAT CONTRACTIONAND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LAND
HARM AROUND OIL TANK FROM
EARTHQUAKE
JIS5K,JIS10K FLANGES
304SS IN FLUID SURFACE
JIS5K,JIS10K,ANSI150Lb FLANGES
ALL STAINLESS STEEL CONDITION IS POSSIBLE
JIS, ANSI AND OTHER
ALL STAINLESS STEEL CONDITION IS POSSIBLE
JIS, ANSI AND OTHER
ALL STAINLESS STEEL CONDITION IS POSSIBLE
JIS, ANSI AND OTHER
ALL STAINLESS STEEL CONDITION IS POSSIBLE
HIGH PRESSURE CONDITION IS POSSIBLE
THE PRODUCT MORE THAN 400A IS ALSO MADE
JIS10K FLANGE
316SS,316LSS IN FLUID SURFACE
ALL STAINLESS STEEL CONDITION IS POSSIBLE
JIS10K FLANGE
304SS IN FLUID SURFACE
316SS,316LSS IN TUBES
DOUBLE PLIES TUBES
JIS10K,ANSI150Lb FLANGES
ALL STAINLESS STEEL CONDITION IS POSSIBLE
JIS, ANSI AND OTHER
ALL STAINLESS STEEL CONDITION IS POSSIBLE
HOSE COVERED BY ANTI-CORROSIVE MATERIAL
JIS, ANSI AND OTHER
ALL STAINLESS STEEL CONDITION IS POSSIBLE
HIGH PRESSURE CONDITION IS POSSIBLE
DUAL HOSES
JIS, ANSI AND OTHER
FLUORO-PLASTIC(PTFE) LINED TUBES
JIS, ANSI AND OTHER
ALL STAINLESS STEEL CONDITION IS POSSIBLE
HIGH PRESSURE CONDITION IS POSSIBLE
COVERED BY WATER PROOF MATERIAL
JIS, ANSI AND OTHER
ALL STAINLESS STEEL CONDITION IS POSSIBLE
HIGH PRESSURE CONDITION IS POSSIBLE
THE PRODUCT MORE THAN 400A IS ALSO MADE
JIS, ANSI AND OTHER
ALL STAINLESS STEEL CONDITION IS POSSIBLE
HIGH PRESSURE CONDITION IS POSSIBLE
JIS, ANSI AND OTHER
ALL STAINLESS STEEL CONDITION IS POSSIBLE
HIGH PRESSURE CONDITION IS POSSIBLE
14
15
17
17
18
18
19
19
25
20
21
22
20
171819
25
25
1.0MPa
1.4MPa
2.8MPa
1.0MPa
1
350
FLANGE20A
50ANON WELDING TYPEPUMP CONNECTOR
ISOLATION OF VIBRATION FROM MACHINEALIGNMENTUNEVEN SINKING OF LANDABSORPTION OF HEAT CONTRACTIONAND ELONGATION
JIS10K, FLANGES 161.0MPa
3503
3503
3503
3503
80
-19680
2703
3503
3503
204
204
1004
3503
TYPE NAME FITTINGS NOMINALDIA.
WORKINGPRESSURE
MAX.TEMPERATURE
APPLICATION NOTE PAGEDETAILTYPENUMBER
SEMIFULL
FLANGE
FIXEDFLANGE
FEMALETHREADS
MALE ORFEMALETHREADS
FEMALETHREADS
FEMALE THREADS
MALE ORFEMALETHREADS
FEMALETHREADS
MALE ORFEMALETHREADS
MALE ORFEMALETHREADS
MALE ORFEMALETHREADS
COPPERSOCKET
CAM-LOCK
QUICK COUPLING
STEEL PIPEOR COPPERPIPE
FLANGE ORTHREADS
COUPLINGCONNECTION
B710B720
E410E420
S210
S215
S220
S222
S225
S227
C330
C325
S230
S270
C310
C315
C320
C340
50A300A
20A200A
15A50A
8A25A
8A65A
6A100A
6A65A
8A65A
6A65A
8A80A
25A50A
6A100A
15A150A
8A50A
6A50A
6A200A
NON WELDING TYPEPUMP CONNECTOR
BELLOWS TYPEEXPANSION JOINT
NON WELDING TYPEFEMALE UNIONS END
NON WELDING TYPE CONNECTION BETTWEEN NUT AND TUBES
FEMALEUNIONS END
FEMALEUNIONS END
SWIVEL COUPLING WITH METAL TO METAL SEAL
SWIVEL COUPLING WITH METAL TO METAL SEAL
FEMALESWIVEL END
COPPERSOCKET END
COUPLING END
THREADED END
TANKER JOINT
CAM-LOCK END
QUICK COUPLING
PIPE END
SANITARYFITTINGS END
ISOLATION OF VIBRATION FROM PUMP
ALIGNMENT
UNEVEN SINKING OF LAND
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
FOR AIR CONDITIONING AND
SANITATION
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LAND
ALIGNMENT
UNEVEN SINKING OF LAND
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LAND
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LAND
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LAND
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
ALIGNMENT
UNEVEN SINKING OF LAND
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
ALIGNMENT
APPLICABEL FOR OFTEN CHANGING
ALIGNMENT
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
RUN WAY OF AIR PORT
PROTECTION OF ELECTRIC CABLE
UNEVEN SINKING OF LAND
ALIGNMENT
UNEVEN SINKING OF LAND
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
ALIGNMENT
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
APPLICABLE FOR OFTEN CHANGING
ALIGNMENT
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
APPLICABLE FOR OFTEN CHANGING
ALIGNMENT
UNEVEN SINKING OF LAND
ABSORPTION OF HEAT CONTRACTION
AND ELONGATION
CONVEYING CHEMICALS ON TANKER
JIS10K,JIS20K FLANGES
DOUBLE PLIES BELLOWS
JIS10K FLANGE
304LSS,316LSS IN FLUID SURFACE
WITH TAPER THREADS
MALLEABLE CAST IRON FITTINGS
304SS TUBES
METAL TO METAL SEALING WITHOUT GASKET
SWIVEL NUT AND ADAPTER
HIGH PRESSURE CONDITION IS POSSIBLE
FILLING LINE FOR GAS CYLINDERS
ANY TYPE IS AVAILABLE ON REQUEST
THREADED NIPPLE OR THREADED SOCKET
HIGH PRESSURE CONDITION IS POSSIBLE
ANY TYPE IS AVAILABLE ON REQUEST
ANY TYPE IS AVAILABLE ON REQUEST
WITH FEMALE TAPER THREADS
ANY TYPE IS AVAILABLE ON REQUEST
WITH FEMALE TAPER THREADS
HIGH PRESSURE CONDITION IS POSSIBLE
ANY TYPE IS AVAILABLE ON REQUEST
HIGH PRESSURE CONDITION IS POSSIBLE
ANY TYPE IS AVAILABLE ON REQUEST
ANY TYPE IS AVAILABLE ON REQUEST
HIGH PRESSURE CONDITION IS POSSIBLE
ANY TYPE IS AVAILABLE ON REQUEST
SANITARY FITTINGS
ANY TYPE IS AVAILABLE ON REQUEST
WITH TAPER THREADS
HIGH PRESSURE CONDITION IS POSSIBLE
ANY TYPE IS AVAILABLE ON REQUEST
WITH TAPER THREADS
HIGH PRESSURE CONDITION IS POSSIBLE
ANY TYPE IS AVAILABLE ON REQUEST
WITH TAPER THREADS
HIGH PRESSURE CONDITION IS POSSIBLE
ANY TYPE IS AVAILABLE ON REQUEST
WITH TAPER THREADS
ANY TYPE IS AVAILABLE ON REQUEST
23
24
26
27
28
1.0/2.0MPa
1.0MPa
1.0MPa
2204
100
35035
3503
805
5
3503
3503
3503
3503
3503
5
5
3
3
1. Decided by the kind of tubes type. 2. Decided by the kind of fittings . 3. Decided by NOMINAL DIA. and the kind of tubes and fittings type.4. Decided by the application standards. 5. Decided by the kind of fittings packing.
TYPE NAME FITTINGS NOMINALDIA.
WORKINGPRESSURE
MAX.TEMPERATURE
APPLICATION NOTE PAGEDETAILTYPENUMBER
FOR F118-TYPEF118
316L 25A~350A
TU
BE
S
AN
D
BR
AI
DS
TU
BE
S
AN
D
BR
AI
DS
10 11
スパイラルチューブ HELICAL PROFILE ワンピッチチューブ ANNULAR PROFILE オメガチューブ ANNULAR (OMEGA) PROFILE
チューブ TUBES
チューブとブレイド
BRAIDED HOSE : Composes of flexible tubes and a wire braid preventing elongation of tubes.
TUBES AND BRAIDS
種類
P13 P14 Please check 13 14 pages.
U-SHAPEDHELICALCONSTRUCTION
U-SHAPEDANNULARCONSTRUCTION
ANNULARPROFILE
OMEGA-SHAPEDANNULARCONSTRUCTION
HELICALPROFILE
ANNULAR (OMEGA) PROFILE
名称 形状 型式 口径 標準材質
TYPE NAME PROFILE TYPE NOMINAL DIAMETER MATERIAL
備考
NOTE
HAHBHCHSHPSAFXOHUBOAOBOSOPOU
SUS304/316LSUS304/316LSUS304SUS304SUS304/316LSUS304SUS321SUS304SUS304/316LSUS304/316LSUS304/316LSUS304SUS316SUS316
F140
2
F140
2
FOR F140-TYPE
DOUBLE LAYER BRAIDS
FOR F140-TYPE
DOUBLE PLIES TUBES
8A 100A8A 100A10A 25A32A 50A40A 100A(5)6A 50A8A 25A65A 100A125A 350A20A 350A 20A 400A25A 80A50A 300A100A 200A
チューブの種類、特性
HELICALPROFILE
ANNULARPROFILE
ANNULAR(OMEGA)PROFILE
USASA
The tube wall is a continuous U-shaped helical corrugated construction.This type represents the most typical general-purpose small-diameter flexible hoses. The tube can be bent uniformly over the entire length when forced to bend.The tubes are given bright heat treatment as standard processing after corrugation.
The tube wall is a non-spiral U-shaped annular corrugated construction.SA tubes have high corrugations at close intervals, and therefore realize a high degree of flexibility.SA tubes are available in long lengths without an intermediate joint.Tubes are secured with a stable corrugated structure of uniform width without thinner parts.
The tube wall is an omega-shaped annular corrugation construction.The corrugation has continuous curvature to avoid stress concentration, thereby realizing long service lives.These types of tubes are general purpose tubes, available in small to large diameters.The standard products are non-heat treated, and have excellent vibration absorption.
TYPECHARACTERISTICS
Tubes made from stainless steel are durable to heat and weather, compared with rubber and synthetic hoses.
平ワイヤーブレイド FLAT WIRE BRAIDS ブレイデッドブレイド BRAIDED BRAIDS リボンブレイド(帯ブレイド)RIBBON BRAIDS(STRIP BRAIDS)
ブレイド BRAIDS
250A
F140 125A 350A
Wire braids which are flexible and which withstand intense movement are adopted as the standard. For hoses which are in NOM. DIA. of 250A or above, for under high pressure, braided braids which are stronger than the flat wire braids, are applied.
ブレイドの種類、特性
FLAT WIREBRAIDS
PIPING WHICHMOVE
STATIONARYPIPINGS
BRAIDEDBRAIDS
RIBBON BRAIDS(STRIP BRAIDS)
General wire braided product. excels in flex resistance and pressure resistance. Manufacture of very long ones is possible.
10
From several to a dozen or more wires are laid out in parallel then braided.
Pressure resistance was increased without sacrificing flex resistance. Stretchability was added. Manufacture of very long ones is possible.
20
20 or more wires are braided into tapes, and these tapes are further braided.
3m
Prototype of braids it can not be applied to applications where cracks easily form by fatigue, and the repeated frequency of movement. In case of hoses which exceed 3 meters in length, the braiding is difficult.
Strip are cut into bands, then hand woven like a bamboo basket. (Only small bore for special application are braided with machines.
TYPE APPLICATIONS MANUFACTURING METHOD CHARACTERISTICS
253040509090
110170200220280
253040509090
110170200220280
3040509090
110170
8090
100130150160180220320350550800950
8090
100130150160180220320350550800950
14001500
90100130150160180220180180270330450550800950
1400
PRACTICAL
PRACTICAL実用
PRACTICAL実用
120140150180200210210240320410550800950140170180220230240250300380510600850950
14001500
140140170190200250300280280350430580610850
10501400
DI
ME
NS
IO
N
AN
D
PE
RF
OR
MA
NC
E
OF
T
HE
T
UB
E
AN
D
BR
AI
D
DI
ME
NS
IO
N
AN
D
PE
RF
OR
MA
NC
E
OF
T
HE
T
UB
E
AN
D
BR
AI
D
12 13
スパイラルチューブ HELICAL PROFILE
SUS304
1MPa 3000
WORKING PRESSURE : In the case of ambient temperature and 304SS.PRACTICAL BEND RADIUS : The minimum value of the bend radius that wrinkle and bias are not
caused in the braid is shown in the braid addition tube.REPEATED BENDING RADIUS : Under pressure of 1MPa at the time straight and bending deformation are
repeated, a bending radius at which the fatigue life will be 3000 cycles.
型式
TYPE
口径(A)
NOMINALDIAMETER
(A) チューブ寸法(mm)
PRODUCTS
内径 外径 板厚INSIDE DIAMETER OUTSIDE DIAMETER WALL THICKNESS REPETITION NUMBER TUBE BRAID WITH ONE PLY WITH TWO PLIES
曲げ半径(mm)
実用 繰返し
ブレイド仕様
線径(mm) 総本数
質量(kg/m)
チューブ 1重ブレイド
許容圧力(MPa)
BEND RADIUS BRAID CONSTRUCTION WEIGHT WORKING PRESSURE
1重ブレイド付 2重ブレイド付
HA
8101520253240506580
1008
101520253240506580
1001015202532405040506580
100
7.310.013.018.525.032.038.050.563.076.0
101.57.8
10.513.419.125.432.538.551.063.576.5
102.010.513.419.125.432.939.351.837.049.562.574.6
100.0
11.515.719.026.033.341.048.062.076.591.0
118.511.015.218.525.632.840.647.661.576.090.5
118.015.218.525.632.840.647.661.546.860.775.291.8
119.0
0.200.250.300.300.300.300.350.400.400.450.500.200.250.300.300.300.300.350.400.400.450.500.250.250.250.250.230.250.300.500.500.500.800.80
110120170180210250320400440550700190190260270290340430540580700900190210220250290360470600700800
10001100
0.30.30.30.30.30.40.40.40.40.50.50.30.30.30.30.30.40.40.40.40.50.50.30.30.30.30.40.40.40.40.40.40.50.5
120168192256320288384480528576720120168192256320288384480528576720168192256320288384480384480576576672
0.10.30.30.50.70.81.11.62.02.43.80.10.20.20.30.50.60.81.21.41.92.80.20.20.30.40.40.50.81.21.51.84.05.8
0.10.10.20.20.30.40.60.81.01.21.70.10.10.20.20.30.40.60.81.01.21.70.10.20.20.30.40.60.80.60.80.91.31.7
5.64.05.23.52.42.42.71.81.21.91.27.87.85.23.72.43.12.71.81.21.91.27.85.23.72.42.42.51.82.81.91.51.81.0
5.64.05.83.52.82.42.82.82.02.22.07.88.08.36.04.53.83.93.52.42.52.28.06.84.03.02.42.52.55.73.93.13.72.1
HB
HC
HS
HP
チューブとブレイドの寸法と性能DIMENSION AND PERFORMANCE OF THE TUBE AND BRAID
SUS304
1MPa 3000
2 FX
In the case of ribbon braids. Value is braid thickness. WORKING PRESSURE : In the case of ambient temperature and 304SS.PRACTICAL BEND RADIUS : The minimum value of the bend radius that wrinkle and bias are not
caused in the braid is shown in the braid addition tube.REPEATED BENDING RADIUS : Under pressure of 1MPa at the time straight and bending deformation are
repeated, a bending radius at which the fatigue life will be 3000 cycles.Weight of FX-TYPE with double plies braids.
ワンピッチチューブ ANNULAR PROFILE
型式
TYPE
口径(A)
NOMINALDIAMETER
(A) チューブ寸法(mm)
PRODUCTS
内径 外径 板厚INSIDE DIAMETER OUTSIDE DIAMETER WALL THICKNESS REPETITION NUMBER TUBE BRAID WITH ONE PLY WITH TWO PLIES
曲げ半径(mm)
実用 繰返し
ブレイド仕様
線径(mm) 総本数
質量(kg/m)
チューブ 1重ブレイド
許容圧力(MPa)
BEND RADIUS BRAID CONSTRUCTION WEIGHT WORKING PRESSURE
1重ブレイド付 2重ブレイド付
SA
FX
OH
UB
68
10152025324050
8101520256580
100125150200250300350
6.08.5
10.513.319.725.532.639.051.5
6.89.9
13.520.225.761.575.0
101.0137.4162.8213.9254.2301.7336.8
9.512.315.018.325.632.940.847.961.512.516.821.130.738.777.090.0
118.0179.8205.2256.3307.2354.7389.8
0.150.150.200.200.200.250.250.300.300.350.340.320.400.490.300.300.351.201.201.201.501.501.50
20253040509090
110170
35405075
100200220280
110016001900210026002900
80100140160200220290360470130140160210230300450500
0.30.30.30.30.30.30.40.40.4
0.40.50.50.40.60.60.40.40.6
120120168192256320288384480
528576720
323638
184208224
0.10.10.20.20.30.50.50.71.10.40.50.71.31.71.01.21.6
12.314.218.227.131.735.1
0.10.10.10.20.20.30.40.60.8
1.01.21.72.94.86.45.25.99.4
9.27.08.15.43.62.43.02.71.8
1.21.71.3
9.27.08.36.64.64.93.73.73.1
19.612.010.7
7.04.51.91.71.3
The strength of stainless steel decreases with the rise in temperature. In case the working temperature is high, in order to obtain a rough indication of the maximum working pressure of the metal hose, multiply the maximum working pressure at room temperature by the following figures.
オメガチューブ ANNULAR (OMEGA) PROFILE
SUS304
1MPa 3000
WORKING PRESSURE : In the case of ambient temperature and 304SS.PRACTICAL BEND RADIUS : The minimum value of the bend radius that wrinkle and bias are not
caused in the braid is shown in the braid addition tube.REPEATED BENDING RADIUS : Under pressure of 1MPa at the time straight and bending deformation are
repeated, a bending radius at which the fatigue life will be 3000 cycles.
型式
TYPE
口径(A)
NOMINALDIAMETER
(A) チューブ寸法(mm)
PRODUCTS
内径 外径 板厚INSIDE DIAMETER OUTSIDE DIAMETER WALL THICKNESS REPETITION NUMBER TUBE BRAID WITH ONE PLY WITH TWO PLIES
曲げ半径(mm)
実用 繰返し
ブレイド仕様
線径(mm) 総本数
質量(kg/m)
チューブ 1重ブレイド
許容圧力(MPa)
BEND RADIUS BRAID CONSTRUCTION WEIGHT WORKING PRESSURE
1重ブレイド付 2重ブレイド付
OA
OB
OS
OP
OU
2025324045506580
100125150200250
2025324045506580
100125150200250300350
25324045506580506580
100125150200250300100125150200
20.426.032.540.045.554.063.576.5
101.0126.5150.0199.5249.0
20.426.533.040.546.054.564.077.0
101.5127.0150.5200.0249.5299.5334.0
27.032.541.046.053.567.078.554.564.077.0
101.5127.0150.5200.0249.5299.5100.3125.8149.3198.6
30.538.046.056.062.073.086.599.5
126.0152.5179.0231.5284.5
30.537.545.555.561.572.586.099.0
125.5152.0178.5231.0284.0336.0373.0
36.045.054.060.070.084.095.072.586.099.0
125.5152.0178.5231.0284.0337.0125.3152.0178.5231.0
0.300.300.300.400.400.400.400.400.400.500.500.600.600.300.300.300.400.400.400.400.400.400.500.500.600.600.701.000.200.200.250.250.250.250.250.500.500.500.500.600.600.700.800.80
0.5 20.6 20.6 20.7 2
0.30.40.40.40.40.40.50.50.50.50.50.70.50.30.40.40.40.40.40.50.50.50.50.50.70.50.60.70.40.40.40.40.40.50.50.40.50.50.60.60.70.50.60.70.60.60.70.5
320288384480480528576576720864
115211523200
320288384480480528576576720864
11521152320032003200
288384480480528576576528576576720864960
268832003200
720864960
2688
0.50.60.81.31.51.92.53.03.35.46.0
10.512.8
0.40.50.61.11.21.61.92.12.53.94.88.3
10.113.421.0
0.30.50.70.70.91.11.12.02.32.53.24.75.79.7
13.116.3
6.19.2
11.619.3
0.30.40.60.70.80.91.21.31.81.82.34.46.60.30.40.60.70.80.91.21.31.81.82.34.46.68.9
11.50.40.60.70.80.91.21.30.91.21.32.12.43.75.48.3
11.52.12.43.75.4
3.62.92.22.72.01.61.11.11.11.01.01.11.13.64.12.92.92.01.61.61.61.11.01.01.11.11.11.32.81.31.81.61.11.11.21.52.41.61.81.51.61.51.71.61.81.51.61.5
4.12.92.22.72.61.81.11.11.11.51.21.41.14.74.12.93.53.32.31.61.61.41.91.61.71.41.31.62.81.31.81.61.11.11.23.02.52.62.22.32.12.01.81.63.63.03.23.0
TEMPERATURE
TEMPERATURECOEFFICIENT
-196 40
1
75
.96
100
.94
125
.91
150
.88
175
.87
200
.86
225
.86
300
.85
325
.85
350
.85
375
.84
400
.82
425
.81
450
.79
「温度と使用圧力」 TEMPERATURE AND WORKING PRESSURE
重量(在庫品)WEIGHT
重量 WEIGHT
耐屈曲性に優れる非溶接一体成型のフランジ型
1.5MPa
-100 183
OS
国土交通省大臣官房官庁営繕部監修公共建築工事標準仕様書(機械設備工事編)平成22年版
2 22.2.7.1
JIS G 4305SUS304 SUS316 SUS316L
1.5
2.2.8.1 JIS G 4305
SUS304 SUS316 SUS316L
25 300mm32 50 500mm65 150 750mm200 1,000mm
P57
SA
50 90 9040PRACTICAL BENDRADIUS (mm) 280110 170 200 220
300, 400, 500, 600, 750, 800, 1000 300, 400, 500, 600, 800, 1000300A250A200A150A125A100A80A65A
500, 1000
90 100 130 150 160 180 220 320 350 550 800 950 1400PRACTICAL BENDRADIUS (mm)
FL
EX
IB
LE
M
ET
AL
H
OS
E
F1
10
FL
EX
IB
LE
M
ET
AL
H
OS
E
F1
15
14 15
F110フランジ型汎用品フレキシブルメタルホース
SUS304
Flange products made to standardFlange connections with stainless steel in contact with fluid.
口径 15A 100A在庫品全長 300,400,500,600,800,1000mm
継手金具 JIS10K/SS400JIS5K
適合仕様
F115 P15
国土交通省大臣官房官庁営繕部監修公共建築工事標準仕様書(機械設備工事編)平成22年版
2 22.2.8.1
JIS G 4305SUS304 SUS316 SUS316L
25 300mm32 50 500mm65 150 750mm200 1,000mm
It is applicable for alignment. It is inapplicable to oscillating absorption. The corrosion resisting seal for stainless steel should be applied connecting with piping.
NOMINAL DIAMETER : 15A 100ASTANDARD LENGTH : 300,400,500,600,800,1000mm
Other length is available on request.
FITTINGS : JIS10K/SS400 (ZINC PLATING)JIS 5K FLANGE is available on request.
300mm400mm500mm600mm800mm1000mm
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
1.41.41.41.51.61.6
1.71.81.81.92.02.1
2.62.72.82.83.03.1
3.53.53.63.73.94.0
3.83.94.04.14.34.5
4.64.85.05.15.45.8
6.46.66.87.07.47.8
6.66.87.07.27.78.1
8.08.38.68.99.5
10.1
口径 NOMINAL DIAMETER 15A 20A 25A 32A 40A 50A 65A 80A 100A
P6 Please check 8 pages for detailes.
15A 20A 25A 32A 40A 50A 65A 80A 100A口径 NOMINAL DIAMETER
14 16 18 20
金具長 FITTING LENGTH
L Fitting length is the (L) section of the above figure.
FITTING LENGTH (mm)
101.0280
13.4 19.150 90 9040
25.4 32.9 39.3110
51.8170
61.5200
76.5220
口径 NOMINAL DIAMETER 15A 20A 25A 32A 40A 50A 65A 80A 100A
適用チューブ(在庫品) USED TUBES TYPE
TUBES TYPE (SUS304)
INSIDE DIAMETER (mm)
OH
F115Non-welding type flexible metal hosePortion in contact with fluid is stainless steel.High corrosion resistance. High durability.
口径 20A 300A在庫品口径 65A 300A継手金具 JIS10K/SS400
,JIS5K,ANSI/JPI150Lb
適合仕様
NOMINAL DIAMETER : 20A 300ASTANDARD LENGTH : 300,400,500,600,750,800,1000mm
Other length is available on request.
FITTINGS : JIS10K/SS400 (ZINC PLATING)Stainless steel material, JIS 5K and ANSI/JPI150Lb FLANGES are available on request.
1 2 3 4 5 6
P6 Please check 8 pages for detailes.
100 200150口径 NOMINAL DIAMETER 20A 25A 32A 40A 50A 65A 80A 100A 125A 150A 200A 250A 300A
最短製作長 MINIMUM LENGTH
MINIMUM LENGTH (mm)
L Fitting length is the (L) section of the above figure.
GASKETt=3mm
各種寸法 VARIOUS DIMENSION
ID (mm)
OD (mm)255918
307018
408021
458521
50100
20
65120
22
75130
22
100155
24
125185
28
150215
30
200265
41
295375
54
250330
47M12x60 M16x65 M16x70 M16x80 M20x85 M20x90 M20x100 M22x110 M22x120
口径 NOMINAL DIAMETER 20A 25A 32A 40A 50A 65A 80A 100A 125A 150A 200A 250A 300A
FITTING LENGTH (mm)
BOLT LENGTH (mm)
300mm400mm500mm600mm750mm800mm1000mm
1.51.61.71.7
1.92.0
2.42.52.62.7
2.93.1
3.13.33.43.5
3.84.1
3.33.53.63.8
4.14.4
4.04.14.34.5
4.85.2
5.55.75.96.16.36.67.0
5.55.76.06.26.46.77.2
6.56.87.17.47.78.08.6
9.810.110.510.911.311.712.4
12.913.413.814.314.815.316.3
18.019.220.521.8
24.326.8
28.830.532.233.8
37.240.5
31.533.735.938.2
42.647.1
口径 NOMINAL DIAMETER 20A 25A 32A 40A 50A 65A 80A 100A 125A 150A 200A 250A 300AWEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
製品口径 NOMINAL DIAMETER 20A 25A 32A 40A 50A 65A 80A 100A 125A 150A 200A 250A 300A(25A)27.0
90
(32A)32.5100
(40A)41.0130
(45A)46.0150
53.5160
78.5220
67.0180
299.51400
249.5950
200.0800
150.5550
適用チューブ USED TUBES TYPE SUS316L OB 316LSS. (OB-TYPE) IS AVAILABLE ON REQUEST.
127.0350
101.5320
OBINSIDE DIAMETER (mm)
TUBES TYPE (N.D)
口径 NOMINAL DIAMETER
在庫品全長 STANDARD LENGTH
STANDARD LENGTH (mm)
1 2 3 4
AL
L L
23 4 1
AL
L L
214 35 6
20A 50A F121(固定)/ F122(ルーズ)
F151(固定)/ F152(ルーズ)PRACTICAL BENDRADIUS (mm)
重量 WEIGHT
国土交通省大臣官房官庁営繕部監修公共建築工事標準仕様書(機械設備工事編)平成22年版
2 22.2.7.1
JIS G 4305SUS304 SUS316 SUS316L
1.5
FL
EX
IB
LE
M
ET
AL
H
OS
E
F1
18
16
FL
EX
IB
LE
M
ET
AL
H
OS
E
F1
21
/F
12
2・
F1
51
/F
15
2
17
口径 20A 50A在庫品全長 300, 400, 500, 600, 800, 1000mm継手金具 J IS10K/SS400
JIS10K適合仕様
2.2.8.1 JIS G 4305
SUS304 SUS316 SUS316L
25 300mm32 50 500mm65 150 750mm200 1,000mm
P6 Please check 8 pages for detailes.
F115
F118新開発チューブを搭載した非溶接一体成型のフランジ型 Non-welding type flexible metal hose
Portion in contact with fluid is stainless steel.High corrosion resistance. High durability.More bigger contact gasket width.
The corrosion resisting seal (attached for standard) should be applied connecting with piping.
NOMINAL DIAMETER : 20A 50ASTANDARD LENGTH : 300,400,500,600,800,1000mmFITTINGS : JIS10K/SS400 (ZINC PLATING)
製品口径 NOMINAL DIAMETER 20A
19.7
50
適用チューブ USED TUBES TYPE
SAINSIDE DIAMETER (mm)
TUBES TYPE
25A
25.5
90
32A
32.6
90
40A
39.0
110
50A
51.5
170
重量 WEIGHT
WEIGHT(kg)
WEIGHT(kg)
WEIGHT(kg)
WEIGHT(kg)
WEIGHT(kg)
WEIGHT(kg)
300mm400mm500mm600mm800mm1000mm
口径 NOMINAL DIAMETER 20A 25A 50A
1.71.71.81.81.92.0
2.62.62.72.82.93.1
4.34.54.74.95.25.6
40A
3.63.73.84.04.24.5
32A
3.33.43.53.63.84.0
P6 Please check 8 pages for detailes.
口径 10A 100A継手金具 JIS5K,10K,20K,ANSI/JPI150Lb,300Lb
適用チューブ HA,HB,HC,HS,HP,SA,OH
受注製作のフランジ型
F121 F122
Flanged products made to orderManufacture of short face length products has become possible by the use of the flange collar. F121: fixed flange type, F122: lapped flange type
F121/F122
MAX.70
These products are underground specification versions of F121/F122, with anticorrosion tape covering on the outside. Parts other than those of stainless steel are given anticorrosive coating.
F123 / F124
SS400 F122
L Fitting length is the (L) section of the above figure.
15A10A 20A 25A 32A 40A 50A 65A 80A 100A口径 NOMINAL DIAMETER
3030 23 27 35
金具長 FITTING LENGTH
10K/ SUS304 For fluid surface material is 304SS. With JIS10K FLANGE.
FITTING LENGTH (mm)
15A10A 20A 25A 32A 40A 50A 65A 80A 100A口径 NOMINAL DIAMETER
150 200 250
最短製作長 MINIMUM LENGTH
10K/ SUS304 For fluid surface material is 304SS. With JIS10K FLANGE.
MINIMUM LENGTH (mm)
The corrosion resisiting seal for stainless steel should be applied connecting with piping.
NOMINAL DIAMETER : 10A 100AFITTINGS : JIS5K,10K,20K,ANSI/JPI150Lb,300Lb AND OTHERSUSED TUBES TYPE : HA,HB,HC,HS,HP,SA,OH
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)4. FLANGE RATING5. MATERIAL OF EACH PARTS
1.2.3.4.5.
1 2 3 4 5 6
L
AL
L
216 4 35
F122 F121
1 表プレート 2 3 ルーズフランジ 4 チューブ 5 ブレイド
31245
AL
1 2 3 4 5 6 7
AL
L L
2 4517 6 3
F152 F151
F123 (固定) / F124 (ルーズ)
F153 (固定) / F154 (ルーズ)
F128 (ルーズ) / F129 (固定)
F158 (ルーズ) / F159 (固定)
P6 Please check 8 pages for detailes.
受注製作のフランジ型
F123 F124
Flanged products made to orderUse of the lap joint offers a wide range of options. The products are adaptable to various packing face treatments. F123: fixed flange type, F124: lapped flange type
F123/F124
MAX.70
These products are underground specification versions of F123/F124, with anticorrosion tape covering on the outside. Parts other than those of stainless steel are given anticorrosive coating.
口径 10A 150A継手金具 JIS5K,10K,20K,ANSI/JPI150Lb,300Lb
適用チューブ HA,HB,HC,HS,HP,SA,FX,OH,OA,OB,OP3
SS400 F124
15A10A 20A 25A 32A 40A 50A 65A 80A 100A 125A 150A口径 NOMINAL DIAMETER
200 250 300
最短製作長 MINIMUM LENGTH
10K/ SUS304 For fluid surface material is 304SS. With JIS10K FLANGE.
MINIMUM LENGTH (mm)
15A10A 20A 25A 32A 40A 50A 65A 80A 100A 125A 150A
4542 65 67 70 75 105 110
口径 NOMINAL DIAMETER
金具長 FITTING LENGTH
10K/ SUS304 For fluid surface material is 304SS. With JIS10K FLANGE.L Fitting length is the (L) section of the above figure.FITTING LENGTH (mm)
A high pressure specification article can also be made.The corrosion resisting seal for stainless steel should be applied connecting with piping.
NOMINAL DIAMETER : 10A 150AFITTINGS : JIS5K,10K,20K,ANSI/JPI150Lb,300Lb AND OTHERSUSED TUBES TYPE : HA,HB,HC,HS,HP,SA,FX,OH,OA,OB,OP
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)4. FLANGE RATING5. MATERIAL OF EACH PARTS
1.2.3.4.5.
大口径の受注製作フランジ型
F129 F128
These are large-diameter flanged products made to orderThese products are adaptable to various packing face treat-ments. F129: fixed flange type, F128: lapped flange type
P6 Please check 8 pages for detailes.
F128/F129
MAX.70
These products are underground specification versions of F128/F129, with anticorrosion tape covering on the outside. Parts other than those of stainless steel are given anticorrosive coating.
口径 65A 350A 400A継手金具 JIS5K,10K,20K,ANSI/JPI150Lb,300Lb
適用チューブ HA,HB,HP,OH,UB,OA,OB,OP,OU3
SS400 F128
80A65A 100A 125A 150A 200A 250A 300A 350A口径 NOMINAL DIAMETER
400300 500
最短製作長 MINIMUM LENGTH
10K/ SUS304 For fluid surface material is 304SS. With JIS10K FLANGE.
MINIMUM LENGTH (mm)
L Fitting length is the (L) section of the above figure.
80A65A 100A 125A 150A 200A 250A 300A 350A口径 NOMINAL DIAMETER
110 140100 160
金具長 FITTING LENGTH
10K/ SUS304 For fluid surface material is 304SS. With JIS10K FLANGE.
FITTING LENGTH (mm)
A high pressure specification article can also be made.The corrosion resisting seal for stainless steel should be applied connecting with piping.
NOMINAL DIAMETER : 65A 350AThe product more than 400A can also be made.
FITTINGS : JIS5K,10K,20K,ANSI/JPI150Lb,300Lb AND OTHERSUSED TUBES TYPE : HA,HB,HP,OH,UB,OA,OB,OP,OU
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)4. FLANGE RATING5. MATERIAL OF EACH PARTS
1.2.3.4.5.
1 2 3 4 5 6 7
LAL
L
21 5 4 37 6
F124 F123
1 2 3 4 5 6 7 8
ALL L
3 216 5 74 8
F154 F153
1 2 3 4 5 6 7 8 9
F158 F159
AL
L
7 6 53 41 2 9 8
L
1 2 3 4 5 6 7 8
ALL L
8 7 6 1 2 5 34
F128 F129
FL
EX
IB
LE
M
ET
AL
H
OS
E
F1
23
/F
12
4・
F1
53
/F
15
4
18
FL
EX
IB
LE
M
ET
AL
H
OS
E
F1
28
/F
12
9・
F1
58
/F
15
9
19
口径 32A 300A継手金具 JIS10K/SS400
SUS304設計圧力 1.4MPa 2.1MPa適合仕様
This product is for connection to fire extinguishing equipment (10K) This product is a type-approved product conforming to the technical standards of the Fire Defense Agency in JAPAN.
NOMINAL DIAMETER : 32A 300AFITTING : JIS10K/SS400 (ZINC PLATING)
304SS material is available on request.
DESIGN PRESSURE : 1.4MPa (TEST PRESSURE : 2.1MPa)
重量 WEIGHT
消火栓設備等のポンプ接続用(10K)
P57
400,500,750,800300,400,500,750,800
65A 80A 100A 125A 150A 200A 250A 300A
在庫品全長 STANDARD LENGTH口径 NOMINAL DIAMETER
MINIMUM LENGTH (mm)
300 2000240 2000
認定取得長 OVERALL LENGTH口径 NOMINAL DIAMETER 300A
650 1500
250A
550 1500
200A
310 3000
150A125A100A80A65A50A40A32A
220 2000OVERALL LENGTH (mm)
295375
250330
45M22x120
F138(コネクター 21/10K)消火栓設備等のポンプ接続用(10K)
32A
3.33.53.6
40A
3.53.73.9
50A
4.34.64.9
重量 WEIGHT
WEIGHT(kg)
WEIGHT(kg)
WEIGHT(kg)
300mm400mm500mm
口径 NOMINAL DIAMETER
口径 32A 200A継手金具 JIS20K/SS400
SUS304設計圧力 2.8MPa( 4.2MPa) 適合仕様
This product is for connection to fire extinguishing equipment (20K)This product is a type-approved product conforming to the technical standards of the Fire Defense Agency in JAPAN.
重量 WEIGHT
消火栓設備等のポンプ接続用(20K)
FL
EX
IB
LE
M
ET
AL
H
OS
E
F1
30・
F1
38
20
FL
EX
IB
LE
M
ET
AL
H
OS
E
F1
35
21
1 2 3 4 5 6 7
AL
L L
6 5 1 2 4 73
1 2 3 4 5
1 2 3 4 5 6 7
ALL L
1 523 4
ALL L
1 2 46 5 7 3
P6 Please check 8 pages for detailes.
F130(コネクター 21/10K)
300mm400mm500mm750mm800mm1000mm
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
口径 NOMINAL DIAMETER 300A
42.044.860.262.169.9
250A
33.836.044.245.450.5
200A
21.823.327.227.930.9
150A14.115.116.018.418.820.7
125A10.711.412.113.914.215.7
100A7.27.78.29.69.8
10.9
80A5.86.26.67.57.78.5
65A5.96.26.67.57.78.4
50A4.34.64.95.75.86.4
40A3.53.73.94.44.54.9
32A3.33.53.64.14.24.5
L Fitting length is the (L) section of the above figure.
各種寸法 VARIOUS DIMENSION
GASKETt=3mm
口径 NOMINAL DIAMETER
200265
39
150215
31
125185
29
100155
26
75130
65120
50100
M20x100M20x90M20x85M16x80M16x70
458523
300A250A200A150A125A100A80A65A50A40A32A
4080
ID (mm)
OD (mm)
FITTING LENGTH (mm)
BOLT LENGTH (mm)
25
P6 Please check 8 pages for detailes.
80A
F135(コネクター 21/20K)
300mm400mm500mm750mm800mm1000mm
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
7.37.47.57.87.88.0
7.98.18.38.78.89.1
9.19.49.7
10.610.711.3
12.512.913.314.314.515.3
18.318.920.620.922.2
24.425.428.028.530.6
37.739.242.743.446.2
50.552.457.258.161.9
65.868.876.377.883.8
口径 NOMINAL DIAMETER 32A 40A 50A 65A 80A 100A 125A 150A 200A
300 2000 350 2000
口径 NOMINAL DIAMETER 32A 40A 50A 65A 80A 100A 125A 150A 200A
認定取得長 OVERALL LENGTH
口径 NOMINAL DIAMETER 32A 40A 50A 65A 80A 100A 125A 150A 200A
30 35 39 41 48 51
金具長 FITTING LENGTH
L Fitting length is the (L) section of the above figure.
OVERALL LENGTH (mm)
FITTING LENGTH (mm)
32A 80A
100A 200A
The corrosion resisting seal for stainless steel should be applied connecting with piping.
NOMINAL DIAMETER : 32A 200AFITTINGS : JIS20K/SS400 (ZINC PLATING)
304SS material is available on request.
DESIGN PRESSURE : 2.8MPa (TEST PRESSURE : 4.2MPa)
AL
4563
1 2 3 4 5 6
2 1
400A
Please inform us of the following operating conditions.It is not possible to apply to the absorption of a pump vibration and an extreme pules.
国土交通省大臣官房官庁営繕部監修公共建築工事標準仕様書(機械設備工事編)平成22年版
2 22.2.7.1
JIS G 4305SUS304 SUS316 SUS316L
1.5
P7 Please check 9 pages for detailes.
FL
EX
IB
LE
M
ET
AL
H
OS
E
F1
40
22
PU
MP
C
ON
NE
CT
OR
B
71
0/
B7
20
23
B710 : 10KB720 : 20K
40A 100A
125A 350A
口径 50A 300A継手金具 JIS10K,20K/SS400ベローズ材質 SUS316L SUS304適合仕様
B710 / B720 (ビッグジョイント)短面間の非溶接組立型防振継手2
SUS316LJIS
Short-spacing non-welding type pump connectorWith its double-layer bellow structure, this product excels in vibration absorption in short spacing. Unlike other products, the fluid surfaces are all made of 316LSS.This product accommodates flange packings of JIS Standards.
B710B720B710B720B710B720B710B720
59.859.775.875.80.250.300.250.30
75.875.792.892.80.250.300.250.30
88.788.6
105.7105.7
0.250.300.250.30
114.1114.0130.7130.7
0.250.300.250.30
139.7139.3159.9159.9
0.300.400.300.40
165.1164.7185.3185.3
0.300.400.300.40
216.1215.9242.2242.2
0.400.400.400.40
266.0266.0294.0294.0
0.400.500.400.50
317.0317.0347.0347.0
0.400.600.400.70
口径 NOMINAL DIAMETER 50A 65A 80A 100A 125A 150A 200A 250A 300A
ベローズ寸法 BELLOWS DIMENSION
(mm)BELLOWS ID (mm)
(mm)BELLOWS OD (mm)
(mm)OUTER WALL THICKNESS (mm)
(mm)INNER WALL THICKNESS (mm)
B710 (10K)
B720 (20K)200200
150150110
口径 NOMINAL DIAMETER 50A 65A 80A 100A 125A 150A 200A 250A 300A
全長 OVERALL LENGTH (mm)
(0 1 MPa 0)(0 2MPa 0)
B710B720B710B720B710B720B710B720B710B720
461069.04.55.01.5
441179.03.54.01.0
441549.03.03.00.8
721368.05.52.51.5
1183028.05.52.01.1
1193578.05.51.50.9
13422712.0
8.02.51.6
17536112.0
7.52.01.1
17556112.0
6.51.50.9
口径 NOMINAL DIAMETER 50A 65A 80A 100A 125A 150A 200A 250A 300A
性能 PERFORMANCE
Y= 1.0OSCILLATIG PERFORMANCE
PRESSURIZED REPEATED PERFORMANCE
(N/mm)SPRING RATE (N/mm)
(mm)AXIAL MOVEMENT (mm)
(mm)LATERAL DEFLECTION (mm)
100 1,000,000 CYCLE ACCEPTABLE
10 100,000 CYCLE ACCEPTABLE
NOMINAL DIAMETER : 50A 300AFITTINGS : JIS10K,20K/SS400 (ZINC PLATING)BELLOWS MATERIAL : INNER 316LSS
OUTER 304SS
口径 40A 350A継手金具 JIS10K,ANSI/JPI150Lb
継手材質 SS400/SFVC2A,SUS304,316,316L設計圧力 1.0MPa適合仕様
P6 Please check 8 pages for detailes.
1.0MPa5
1000 1.5MPa
1.0MPa 2000
105%
1.5MPa 10
F140危険物のタンク接続配管用 For connection with hazardous substance tanks
This product is a type-approved product conforming to the standards (technical guideline) of the Fire Defense Agency in JAPAN.
20 59
40A
50A
65A
80A
100A
125A
150A
200A
250A
300A
350A
50 100 150 200 250 300 350 400口径(A)最大軸直角変位量
(mm)
500
600
600
700
700
800
800
900
1000
1100
1200
600
700
800
800
900
1000
1100
1200
1400
1400
1500
700
800
900
1000
1100
1200
1300
1400
1500
1700
1800
800
900
1000
1100
1200
1300
1500
1500
1700
1900
2000
900
1000
1100
1200
1300
1400
1600
1700
2000
2200
2200
1000
1100
1200
1300
1400
1500
1700
1800
2100
2300
2400
1100
1200
1300
1400
1500
1600
1800
1900
2200
2500
2600
1200
1300
1400
1500
1600
1800
1900
2100
2300
2600
2800
14-323/TFW-0615
14-323/TFW-0615
14-323/TFW-0615
14-326/TFW-1003
14-326/TFW-1003
14-329/TFF-1503
14-329/TFF-1503
14-331/TFF-2003
14-333/TFF-2503
14-335/TFF-3015
14-337/TFF-3515
14-324/TFW-0630
14-324/TFW-0630
14-324/TFW-0630
14-327/TFW-1006
14-327/TFW-1006
14-330/TFF-1506
14-330/TFF-1506
14-332/TFF-2006
14-334/TFF-2506
14-336/TFF-3030
14-338/TFF-3530
14-325/TFW-0640
14-325/TFW-0640
14-325/TFW-0640
14-328/TFW-1008
14-328/TFW-1008
14-264/F-1540
14-264/F-1540
14-267/F-2040
14-270/F-2540
14-273/F-3040
14-276/F-3540
消防庁の技術指針(抜粋)
NOMINAL DIAMETER : 40A 350AFITTINGS : JIS10K,ANSI/JPI150LbFLANGEMATERIAL : SS400/SFVC2A,304SS,316SS,316LSSDESIGN PRESSURE : 1.0MPa (AMBIENT TEMP.)
金具長 FITTING LENGTH口径 NOMINAL DIAMETER 350A300A250A200A150A125A100A80A65A50A40A
1601401351056560504540L Fitting length is the (L) section of the above figure. 10K/ SUS304 For fluid surface material is 304SS. With JIS10K FLANGE.
FITTING LENGTH (mm)
1 2 3 4 5 6
AL
1 65432
1 2 3 4 5
ALL L
2 51 34
1 2 3 4 5 6 7 8
ALL L
3 5 7 64 1 2 8
ベローズ型伸縮管継手 (10K)SUS316L SUS304L
Bellows type expansion joint (10K)This product conforms to the JIS B2352 Standard. Its fluid surfaces and bellows are made of 316LSS, and the internal sleeve is made of 304LSS.
口径 15A 350A継手金具 JIS ANSI
125A
NOMINAL DIAMETER : 15A 350AFITTINGS : JIS,ANSI AND OTHERS
国土交通省大臣官房官庁営繕部監修公共建築工事標準仕様書(機械設備工事編)平成22年版
2 22.2.6.1
JIS B 2352JIS G 4305
SUS304L SUS316L
EX
PA
NS
IO
N
JO
IN
T
E4
10
/E
42
0
24
FL
EX
IB
LE
M
ET
AL
H
OS
E
F1
55・
F1
65・
T6
70
25
E410 :
E420 :
1 2 3 4 5
1 2 3 4 5 6
AL
5432 1
AL
54 632 1
M N
4- hJ K t
H
口径 20A 200A継手金具 JIS10K/SS400適合仕様
P7 Please check 9 pages for detailes.
E410 / E420
415 440
全長 OVERALL LENGTH口径 NOMINAL DIAMETER 200A150A125A100A80A65A50A40A32A25A20A
365780 880 930680
E410 ( SINGLE TYPE)
E420 ( DOUBLE TYPE)
(mm)
Other fittings are available on request.
NOMINAL DIAMETER : 20A 200AFITTINGS : JIS10K/SS400
JIS16K/JIS20K,250A
各種寸法 VARIOUS DIMENSION口径 NOMINAL DIAMETER 200A150A125A100A80A65A50A40A32A25A20A
(mm)AXIAL MOVEMENT (mm)
14.723.6100100
60135
953.2124.08.0
E410E420E410E420
E420
14.723.6100100
60135
953.2125.08.0
14.723.6120100
701351053.2126.09.0
19.424.1120100
701351053.2126.0
10.0
30.833.6130100
801401203.2158.0
13.0
47.845.11401201001601404.015
11.018.0
67.972.51501201101601504.015
13.020.0
111.087.81701201301601754.019
15.026.0
169.6149.4
2001201501752054.019
22.035.0
232.5162.7
2201601802152354.523
29.045.0
388.6252.8
2501602202152854.525
38.061.0
+10 -35 JIS +10 -25+20 -70 JIS +20 -50
(kg)WEIGHT (kg)
H (mm)
J (mm)
K (mm)
M (mm)
N (mm)
t (mm)
h (mm)
SPRING RATE (N/mm)
EFFECTIVE SECTIONALAREA (cm2)
P6 Please check 8 pages for detailes.
口径 10A 350A継手金具 JIS ANSI
NOMINAL DIAMETER : 10A 350AFITTINGS : JIS,ANSI AND OTHERS
22
The product is a dual hose. The inner liquid may be prevented from cooling to solidify by passing a heated medium through the annual space between the inner and outer tubes. The prod-uct is available in two types: full jacket type, which is dual over the entire length and semi jacket type in which the inner tube is exposed at the flange portions.
F155
F155 FULL-JACKET TYPE F155 SEMI-JACKET TYPE
F165
T670
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)4. FLANGE RATING5. MATERIAL OF EACH PARTS
1.2.3.4.5.
The product is a flexible hose to be used for coolant piping.The product is applicable to flanges of various refrigerating facilities. The tube is covered by a waterproof material.
The product is a stainless steel flexible hose inserted with a fluoroplastic straight hose. The fluid surfaces are made of fluoroplastics.
NOMINAL DIAMETER : 15A 200AFITTINGS : REFRIGERANT FLANGE
口径 15A 200A継手金具
SUS304,SCS13
PRACTICAL BENDRADIUS (mm)
口径 15A 50A最高使用温度 100在庫品全長 300,400,500,600,800,1000mm継手金具 (FCMB)ガスケット(パッキン)
Non-asbestos packing is applicable.
NOMINAL DIAMETER : 15A 50AMAX. TEMPERATURE : 100STANDARD LENGTH : 300,400,500,600,800,1000mmFITTINGS : MALLEABLE CAST IRONPACKING : NON-ASBESTOS PACKING
PRACTICAL BENDRADIUS(mm)
42.062.0
56.374.0
2.0
袋ナットの締付トルク(目安値) RECOMMENDED TORQUE
50 N m500kg cm
70 N m700kg cm
140 N m1400kg cm
90 N m900kg cm
30 N m300kg cm
40 N m400kg cm
70 N m700kg cm
50 N m500kg cm
15A 25A20A8~10Aアダプター材質
CAC406
STEEL
BRONZE
重量(在庫品) WEIGHT
重量(在庫品)WEIGHT
非溶接組立のユニオン型
S210 S220
FL
EX
IB
LE
M
ET
AL
H
OS
E
S2
10
26
FL
EX
IB
LE
M
ET
AL
H
OS
E
S2
15
27
SUS316LS220 S222S210
P7 Please check 9 pages for detailes.
S210Non-welding union type The connection is an easy-to-handle gasket (packing) sealing type, with female taper threads (union type connection). S210 is available only in standard specification. S220 is available in made-to-order production.
金具長 FITTING LENGTH
44 50 55 55 56 63
L Fitting length is the (L) section of the above figure.
口径 NOMINAL DIAMETER 15A 20A 25A 32A 40A 50A
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
WEIGHT (kg)
300mm400mm500mm600mm800mm1000mm
口径 NOMINAL DIAMETER 15A 20A 25A 32A 40A 50A
0.50.50.60.60.60.7
0.70.70.80.91.01.1
1.01.01.11.21.31.5
1.41.41.51.61.81.9
1.61.81.92.02.22.4
2.52.62.82.93.23.5
FITTING LENGTH (mm)
適用チューブ USED TUBES TYPE(SUS304のみ)口径 NOMINAL DIAMETER
13.440
19.150
25.490
32.990
39.3110
53.5180
15A 20A 25A 32A 40A 50AHS OS
INSIDE DIAMETER (mm)
TUBES TYPE (SUS304)
ガスケット(パッキン)寸法表 PACKING DIMENSION
15.027.2
21.034.5
27.240.8
34.551.5
口径 NOMINAL DIAMETER 15A 20A 25A 32A 40A 50A
INSIDE DIAMETER (mm)
OUTSIDE DIAMETER (mm)
THICKNESS (mm)
Non-welding connection between union coupling and tubes.Tighten union nut by spanner with union screw fixed by the other spanner, preventing tubes from twisting.Corrosion resistance packing is applicable.
1 2 3 4 5 6 7 8
AL
LL
2 6 7 845 3 1
P7 Please check 9 pages for detailes.
S215非溶接組立のメタルシール式 Non-welding metal seal connection type
The connection is a metal seal type and is therefore mainte-nance free. The product is light in weight and excels in bending resistance. The swivel nut does not contact the fluid in the hose. Since the gasket (packing) is not required, the hose is applicable to a wide range of fluids.
S215MMS215MF
S215MF S215FF
口径 8A 25A在庫品全長 250,300,400,500,600,700,800,900,1000mm
材質 SUS304
S215
The product is made entirely of stainless steel (304SS) including swivel nuts, and therefore excels in corrosion resistance. It is suited to applications for high environmental temperatures. A small and compact union joint is connected to the tube end without welding, the flared portion of the tube is metal sealed by an adapter. When the pipe to be connected is a lined steel pipe or a stainless steel pipe, use a brass or stainless steel adapter. To avoid twisting the tube, hold the adapter with a wrench when tightening the nut. Also, the nut is easier to tighten by applying impact force rather than steady force. Do not damage the sealing surface, and prevent foreign materials from being trapped in the adapter seal portion. Use of a commercially available sealant is recommended to ensure good sealing of the metal sealing portion.
NOMINAL DIAMETER : 8A 25ASTANDARD LENGTH : 250,300,400,500,600,700,800,900,1000mm
Ohter length is available on request.
MATERIAL : TUBES : 304SSFITTINGS : CARBON STEEL WITH ZINC PLATING,
STAINLESS STEEL AND BRONZE.
WEIGHT(kg)
WEIGHT(kg)
WEIGHT(kg)
WEIGHT(kg)
WEIGHT(kg)
WEIGHT(kg)
WEIGHT(kg)
250mm300mm400mm500mm600mm800mm1000mm
口径 NOMINAL DIAMETER 8A 10A 15A 20A 25A
0.30.30.40.40.40.50.5
0.30.30.40.40.40.50.5
0.40.40.50.50.50.60.7
0.60.60.60.70.70.80.9
0.90.90.91.01.11.21.4
金具長 FITTING LENGTH
L15926
5926
6429
6830
7532
L Fitting length is the (L) section of the above figure.
口径 NOMINAL DIAMETER 8A 10A 15A 20A 25AFITTING LENGTH(mm)
(mm)
適用チューブ USED TUBES TYPE HC 8A 10A
口径 NOMINAL DIAMETER
10.530
10.530
13.440
19.150
25.490
8A 10A 15A 20A 25A
220 250
INSIDE DIAMETER(mm)
MINIMUM LENGTH(mm)
1.2.3.
4.5.
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEM-
PERATURE, PRESSURE, MOVEMENT AND OTHERS)4. THREADS RATING5. MATERIAL OF EACH PARTS
ALL1 L
2 1 3 4 5 6
ALLL1
2 1 3 4 5 6
LAL
L
2 1 4 5 6 73
1 2 3 4 5 6
1 2 3 4 5 6 1 2 3 4 5 6 7
SUS304 SCS13SUS304
コア付ユニオン型 This product is a core fitting union type product available made to orderCore fitting is preventing pipe-end corrosion fittings.
口径 NOMINAL DIAMETER
最短製作長 MINIMUM LENGTH
MINIMUM LENGTH (mm)
口径 NOMINAL DIAMETER
金具長 FITTING LENGTH
L Fitting length is the (L) section of the above figure.
FOR WATER (mm)
15A
44
15A
20A
52
20A
150
25A
57
25A
32A
63
32A
40A
69
40A
200
50A
77
50A
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)
1.2.3.
LAL
L
7 8 961
1 2 3 4 5 6 7 8 9
52 3 4
FL
EX
IB
LE
M
ET
AL
H
OS
E
S2
21
S222 30 O
S221
口径 15A 50A適用チューブ HB在庫品全長 300mm S221チューブ材質 SUS316L適用範囲 水道用硬質塩化ビニルライニング鋼管用 給水用(40℃以下) 水道用ポリエチレン粉体ライニング鋼管用 給水用(40℃以下)
NOMINAL DIAMETER : 15A 50AUSED TUBES TYPE : HBSTANDARD LENGTH : 300mm (S221 ONLY)TUBES MATERIAL : SUS316LDESIGN TEMP : WATER 40℃
Tighten union nut by spanner with union screw fixed by the other spanner,preventings tubes from twisting.
受注製作のユニオン型
-100 183
在庫品口径 NOMINAL DIAMETER
全長 OVERALL LENGTH
10A 15A 20A 25A 32A 40A 50A
300L , 500L
P7 Please check 9 pages for detailes.
口径 8A 65A適用チューブ HA,HB,HC,HS,SA,OH継手金具 FCMB
S220This product is a union type product available made to orderThe product is a union type product made to order. The product is applicable to all ranges of pressure and tempera-ture conditions.
8A 10A 15A 20A 25A 32A 40A 50A 65A口径 NOMINAL DIAMETER
150 200 250
最短製作長 MINIMUM LENGTH
MINIMUM LENGTH (mm)
8A 10A 15A 20A 25A 32A 40A 50A 65A
38.0 42.5 42.0 49.5 55.5 61.0 67.0 74.0 90.5
口径 NOMINAL DIAMETER
金具長 FITTING LENGTH / FOR UNION COUPLING IN MALLEABLE CAST IRON
L Fitting length is the (L) section of the above figure.
FITTING LENGTH (mm)
Any type is available on request.Tighten union nut by spanner with union screw fixed by the other spanner, preventing tubes from twisting.
Any type is available on request.
NOMINAL DIAMETER : 8A 65AUSED TUBES TYPE : HA,HB,HC,HS,SA,OHFITTINGS : MALLEABLE CAST IRON, CARBON STEEL, STAIN-
LESS STEEL AND BRONZE
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER 2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)4. THREADS RATING 5. MATERIAL OF EACH PARTS
1. 2.3.4. 5.
ALL STAINLESS STEEL TYPEオールステンレス仕様(オールSUS ユニオンフレキ)
口径 8A 65A NOMINAL DIAMETER : 8A 65AHose covered by anti-corrosive material.
LAYING UNDER THE GROUND TYPE (TYPE NUMBER : S250)埋設配管用(型番:S250)
1 2 3 4 5 6 7
LAL
L
2 43 517 6
FL
EX
IB
LE
M
ET
AL
H
OS
E
S2
20
28 29
P7 Please check 9 pages for detailes.
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)4. THREADS RATING5. MATERIAL OF EACH PARTS
1.2.3.4.5.
特長 FX 2
用途
PRACTICAL BENDRADIUS (mm)
Compact union joints are welded to the tube. The tube is applicable to all pressure and temperature conditions. #S225 type is available with only straight type adapter. If you look for other type of adapter like 45 degrees, 90 degrees and else at the tip with particular threads like, taper threads, NPT threads, or other, then, #S228 type is available for your requirement. Please refer page 32.Tighten union nut by spanner with union screw fixed by the other spanner, preventing tubes from twisting.
S228
P7 Please check 9 pages for detailes.
口径 6A 100A適用チューブ HA,HB,HC,HS,HP,SA,FX,OH,OA,OB継手金具 FCMB
S222
Any type is available on request.Any sealing surface is available.
製作口径 8A 65A継手金具
製作口径 8A 100A
NOMINAL DIAMETER : 8A 65AFITTINGS : CARBON STEEL AND STAINLESS STEEL
NOMINAL DIAMETER : 8A 100AFITTINGS : Any type is available on request.
S222受注製作のユニオン型 This product is a union type product available made to order
This product is made to order, with unions adaptable to omega tubes. The product is applicable to all ranges of pressure and temperature conditions.
S222
ガスケット(パッキン)について PACKING
S222 PT-HU S222 PT-HU O S222 SW-HU S222 SW-HU O
RcWITH TAPERED FEMAL THREAD
RcWITH TAPERED FEMAL THREAD WITH SOCKET WELD WITH SOCKET WELD
S222
WITH METAL TO METAL SEAL
O
8A 10A 15A 20A 25A 32A 40A 50A 65A
47.0 51.5 57.5 65.5 71.0 81.0 84.0 95.0 106.0
口径 NOMINAL DIAMETER
金具長 FITTING LENGTH FOR UNION COUPLING IN MALLEABLE CAST IRON
L Fitting length is the (L) section of the above figure.
FITTING LENGTH (mm)
8A 10A 15A 20A 25A 32A 40A 50A 65A
150 170 180 200 220 250 280
口径 NOMINAL DIAMETER
最短製作長 MINIMUM LENGTH FOR UNION COUPLING IN MALLEABLE CAST IRON
MINIMUM LENGTH (mm)
Various combinations of corrosion resistance, pressure resistance, moisture resistance, bending resistance, operability may be selected by the proper combination of union joint fittings, tubes and braids. The structure allows combination both with a helical tube and omega tube.In addition to the joint sealing, O-ring sealing or metal sealing may be selected by specifying the proper union joint fitting. Tighten union nut by spanner with union screw fixed by the other spanner, preventing tubes from twisting.
NOMINAL DIAMETER : 6A 100AUSED TUBES TYPE : HA,HB,HC,HS,HP,SA,FX,OH,OA,OBFITTINGS:MALLEABLE CAST IRON,CARBON STEEL,STAINLESS STEEL AND BRONZE
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)4. THREADS RATING5. MATERIAL OF EACH PARTS
1.2.3.4.5.
高圧型ユニオン
コニカル型ユニオン(メタルシール方式)FEMALE UNION WITH METAL TO METAL SEAL
FEMALE UNION FOR HIGH PRESSURE
1 2 3 4 5 6 7
AL
L L
2 3 4 5 6 71
P7 Please check 9 pages for detailes.
Feature : This product realizes a long-life hose, with high twist resistance and flexibility, with the combination of a special high-pressure one-pitch omega-shaped FX tube and double braids. Application : Ironmaking facilities, oil and air compressor lines, high-pressure pipes including hydraulic piping, filling line for gas cylinders, gas line for fire extinguishing. (Please consult us for service conditions.)
S225メタルシール式 Metal sealing type
Swivel nut fittings are directly welded to the tube. Tubes best fitted to a wide range of service conditions from straight line service to piping with a number of repeated bents may be selected.
超高圧用FXチューブ
HIGH PRESSURE TUBES
口径 6A 65A適用チューブ HA,HB,HC,HS,HP,SA,FX,OH,OA,OB継手金具
口径 NOMINAL DIAMETER 8A 10A 15A 20A 25A6.8
12.535
13019.693.1
0.4
9.916.8
4014012.057.8
0.5
13.521.1
5016010.750.9
0.7
20.230.7
752107.0
33.31.3
25.738.71002304.5
21.51.7
The values of room temperature are shown for the performance.
寸法および性能 DIMENSION AND PERFORMANCE
INSIDE DIAMETER (mm)
OUTSIDE DIAMETER (mm)
STATIC BENDINGRADIUS (mm)
WORKING PRESSURE (MPa)
BURST PRESSURE (MPa)
WEIGHT (kg/m)
NOMINAL DIAMETER : 6A 65AUSED TUBES TYPE : HA,HB,HC,HS,HP,SA,FX,OH,OA,OBFITTINGS : CARBON STEELS AND STAINLESS STEEL
NOMINAL DIAMETER : 8A 25AUSED TUBES TYPE : FX (TUBES AND BRAID MATERIAL:321SS)FITTINGS : CARBON STEEL AND STAINLESS STEEL
Any type is available on request.
170 180 200 200 200 250 250 300 400口径 NOMINAL DIAMETER 8A
1706A 10A 15A 20A 25A 32A 40A 50A 65A
最短製作長 MINIMUM LENGTH SNM+SNF
MINIMUM LENGTH (mm)
口径 8A 25A適用チューブ FX SUS321継手金具
S230 S225
金具長 口径 N.D.
金具長 FITTING LENGTH SNM+SNF
L1 L2 Fitting length is the (L1,L2) section of the above figure.
L1(mm)
L2(mm)
5961
5961
6363
7372
7877
8385
9795
9795
119110
143131
FITTING LENGTH (mm)
MALE (SNM)
FEMALE (SNF)
8A6A 10A 15A 20A 25A 32A 40A 50A 65A
AL
L2 L1
2 54 6 713
SNMSNF
1 2 3 4 5 6 7
SNF SNM
30 31
FL
EX
IB
LE
M
ET
AL
H
OS
E
S2
22
FL
EX
IB
LE
M
ET
AL
H
OS
E
S2
25
The product with an omega tube, best suited to moving piping service, is recommended.To prevent extreme bending, the reinforcing spring, an option product, is effective. For details, reference should be made to reinforcement of the hose (38 pages).
P38
FL
EX
IB
LE
M
ET
AL
H
OS
E
S2
27・
S2
28
テーパメタルシート式
口径 6A 65A適用チューブ HA,HB,HC,HS,HP,SA,FX,OH,OA,OB継手金具NOMINAL DIAMETER : 6A 65AUSED TUBES TYPE : HA,HB,HC,HS,HP,SA,FX,OH,OA,OBFITTINGS : CARBON STEELS AND STAINLESS STEEL
JIS R,Rc
G
接続金具形状(例)スリーブ
アダプター
S228
:P2
JIS G
接続金具形状
NOMINAL DIAMETER : 8A 65AUSED TUBES TYPE : HA,HB,HC,HS,HP,SA,FX,OH,OA,OBFITTINGS : CARBON STEEL AND STAINLESS STEEL
S227袋ナット型(平行ねじ)
口径 8A~65A適用チューブ HA,HB,HC,HS,HP,SA,FX,OH,OA,OB継手金具
P2= G PF STANDARD : PARALLEL THREAD AND PACKING SEAL
ガスケット(パッキン)シールTYPE OF PACKING
P2
P7 Please check 9 pages for detailes.32
FL
EX
IB
LE
M
ET
AL
H
OS
E
S2
30・
S2
70
33
P7 Please check 9 pages for detailes.
NOMINAL DIAMETER : 6A 100AUSED TUBES TYPE : HA,HB,HC,HS,HP,SA,FX,OH,OA,OBFITTINGS : CARBON STEEL AND STAINLESS STEEL
S230固定ねじ型R PT
Threaded end typeThe R(PT) screw fittings (nipples or sockets) are directly welded to the tube. Tubes best fitted to a wide range of service conditions from straight line service to piping with a number of repeated bents may be selected.
口径 6A~100A適用チューブ HA, HB, HC, HS, HP,SA,FX,OH,OA,OB継手金具
S270ローリーホース Tanker joint
This hose is used for connection to tank trucks. The connecting part is equipped with a latch easy to connect and disconnect. It consists of a flexible metal hose structure, light in weight and resistant to buckling.
SM+ SFNPT
S225
8A 10A 15A 20A 25A 32A 40A 50A 65A
41 44 51 54 55 61 61 70 75
口径 NOMINAL DIAMETER
金具長 FITTING LENGTH SM IN THE CASE OF WITH HEX MALE NUT
L Fitting length is the (L) section of the above figure.
FITTING LENGTH (mm)
6A
43
8A 10A 15A 20A 25A 32A 40A 50A 65A
140
6A
140 140 150 160 160 180 180 200 250
口径 NOMINAL DIAMETER
最短製作長 MINIMUM LENGTH SM IN THE CASE OF WITH HEX MALE NUT
MINIMUM LENGTH (mm)
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER 2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)4. THREADS RATING 5. THREADS DETAIL 6. MATERIAL OF EACH PARTS
1. 2.3.4. 5. 6.
The product is applicable to the entire range of pressure and temperature conditions.This product is convenient for connection to a pipe with a lapped adapter.This product is adaptable to pipes of male and female taper threads (a pipe with SM on one side and with SF on the other side).This product may be manufactured to various screw specification including NPT screw, in addition to taper threads for pipes.Use in combination with S225 (male or female adapter) when one end is the swivel type. Regarding connecting fittings, units equipped with a cylindrical nipple fitting are available in addition to the hexagonal nipple shown above.
1. 2.3.
4.
5.
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEM-
PERATURE, PRESSURE, MOVEMENT AND OTHERS)4. THREADS RATING5. MATERIAL OF EACH PARTS
1 2 3 4 5
1 2 3 4 5 6
AL
L
25 3 41
SMSF
AL
21 3 45 6
SF SM
1 2 3 4 5
AL
2 3 4 51
1 2 3 4 5 6 7
AL
2 3 4 51 67
30
G
30
G
30
R G
30
R G
30
G
Rc
30
G
Rc
30
G
R
30
G
R
30
G
R 30
G
R
45 45
90 90
ガスケット(パッキン)の温度範囲
NBR
HNBR
-20 80
-20 180
0 50
-40 150
-20 120
-20 80
NBREPDM
ニトリルゴムガスケット(パッキン)の温度範囲
NBR
EPDM
FEP
PTFE
PFA
-30 70
-20 180
-30 110
-30 60
-50 140
-60 150
-20 100
-20 180
The standard material of the packing of the coupling is NBR.The packing is also available in materials such as neoprene, fluoro rubber and EPDM.Regarding the connecting fittings, units equipped with a cylindrical nipple fitting are available in addition to the hexagonal nipple shown above.
P7 Please check 9 pages for detailes.
NOMINAL DIAMETER : 15A 150AUSED TUBES TYPE : HA,HB,HC,HS,HP,SA,FX,OH,OA,OBFITTINGS : CARBON STEEL AND STAINLESS STEEL
COUPLING MATERIAL : STAINLESS STEEL, BRONZ, BRASS AND ALUMINUM.
C310レバーカップリング付 A hose with a cam-lock end
Connection and disconnection of the hose is easy. To disconnect the hose, pushing up the lever on the coupling is sufficient.
ダストキャップ DUST CAP ダストプラグ DUST PLUG
口径 15A 150A適用チューブ HA,HB,HC,HS,HP,SA,FX,OH,OA,OB継手金具
PP
AF
L Fitting length is the (L) section of the above figure.
口径 NOMINAL DIAMETER
金具長 FITTING LENGTH15A 20A 25A 32A 40A 50A 65A
111 112 123 135 140 151 183FITTING LENGTH (mm)
最短製作長 MINIMUM LENGTH IN THE CASE OF WITH COUPLING
口径 NOMINAL DIAMETER 15A 20A 25A 32A 40A 50A 65A
270 280 300 330 340 370 470MINIMUM LENGTH (mm)
Dタイプ D-TYPEアダプター ADAPTER
1.2.3.
4.5.
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEM-
PERATURE, PRESSURE, MOVEMENT AND OTHERS)4. COUPLING RATING5. MATERIAL OF EACH PARTS
AL
L
21 67 53 4
1 2 3 4 5 6 7
口径 8A 50A適用チューブ HA,HB,HC,HS,HP,SA,FX,OH,OA,OB継手金具
P7 Please check 9 pages for detailes.
C315クイックカップリング付 Quick connect coupling hose, with a quick coupling
This is a quick connect and disconnect hose equipped with a bearing-type coupling joint, to facilitate connection and discon-nection in one action. This hose is suited to liquid and gas. Prod-ucts to meet high-pressure specifications are available.
L Fitting length is the (L) section of the above figure.
口径 NOMINAL DIAMETER
金具長 FITTING LENGTH8A 10A 15A 20A 32A 40A 50A
107 118 131 149
25A
169 189 199 215FITTING LENGTH (mm)
口径 NOMINAL DIAMETER
最短製作長 MINIMUM LENGTH IN THE CASE OF WITH COUPLING
8A 10A 15A 20A 32A 40A 50A
300 300 350 350
25A
400 450 450 500MINIMUM LENGTH (mm)
開放型 PLUG 開放型 SOCKET
開閉型 SOCKET開閉型 PLUG
NOMINAL DIAMETER : 8A 50AUSED TUBES TYPE : HA,HB,HC,HS,HP,SA,FX,OH,OA,OBFITTINGS : CARBON STEEL AND STAINLESS STEEL
COUPLING MATERIAL : STAINLESS STEEL, BRONZ, BRASS AND CARBON STEEL (ZINC PLATING).
The bi-directional open-and-shutoff type coupling is equipped with automatic open and shut valves both in the socket and plug, preventing the liquid inside the hose from flowing out when the hose is disconnected. (The open-type hose without valve is also available.) In addition to the hexagonal coupling joint fitting of the flexible metal hose shown above, hoses with cylindrical nipples are available.
1.2.3.
4.5.
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEM-
PERATURE, PRESSURE, MOVEMENT AND OTHERS)4. COUPLING RATING5. MATERIAL OF EACH PARTS
1 2 3 4 5 O 6 7
AL
L
213 4 5 67
FL
EX
IB
LE
M
ET
AL
H
OS
E
C3
10
34
FL
EX
IB
LE
M
ET
AL
H
OS
E
C3
15
35
P7 Please check 9 pages for detailes.
NOMINAL DIAMETER : STEEL PIPE : 6A 350ACOPPER PIPE : 6.35 OVRE
USED TUBES TYPE : HA,HB,HC,HS,HP,SA,FX,OH,OA,OB,OS,OPFITTINGS : CARBON STEEL PIPE, STAINLESS STEEL PIPE AND COPPER PIPE
Any type is available on request.
NOMINAL DIAMETER : 25A 50AUSED TUBES TYPE : HB,HC,HSFITTINGS : MALLEABLE CAST IRON (ZINC PLATING)
C320パイプエンド型 Pipe end type flexible hose
The hoses are equipped with butt-welding joints. Tubes best fitted to a wide range of service conditions from straight line service to piping with a number of repeated bents may be selected.
C325電線保護管用 Coupling connection
This product protects electric wires from weathering and sunlight, and is used for pits and exposed piping.
6A 100A
口径 6A 350A6.35
適用チューブ HA,HB,HC,HS,HP,SA,FX,OH,OA,OB,OS,OP継手金具
JIS ANSI
口径 25A 50A適用チューブ HB,HC,HS継手金具
L Fitting length is the (L) section of the above figure.
口径 NOMINAL DIAMETER
鋼管用パイプエンド:最短製作長・金具長 WITH STEEL PIPE : MINIMUM LENGTH・FITTING LENGTH
120 130 140 200 500
6A 8A 15A10A 20A 25A 32A 50A 65A40A 80A 100A 125A 150A 200A 250A 300A 350A
600MINIMUM LENGTH (mm)
FITTING LENGTH (mm)
PIPE LENGTH (mm)
32 35 37 40 120 20020 100 200
L Fitting length is the (L) section of the above figure.
口径 NOMINAL DIAMETER
銅管用パイプエンド:最短製作長・金具長 WITH COPPER PIPE : MINIMUM LENGTH・FITTING LENGTH
200 230 250 300
6A 8A 15A10A 20A 25A 32A 40A 50A 65AMINIMUM LENGTH (mm)
FITTING LENGTH (mm)
PIPE LENGTH (mm)
62 7572 85 97 120
50 60 70 80 100
End pipe welded with tubes.High pressure condition is possible.
With water proof coupling.
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)4. PIPE DIMENSION5. MATERIAL OF EACH PARTS
1. 2.3.4.5.6.
1 2 3 4
1 2 3 4 5
AL
LL
2 3 41
21 35 4
FL
EX
IB
LE
M
ET
AL
H
OS
E
C3
20・
C3
25
36
FL
EX
IB
LE
M
ET
AL
H
OS
E
C3
30・
C3
40
37
P7 Please check 9 pages for detailes.
NOMINAL DIAMETER : 8A 80AUSED TUBES TYPE : HA,HB,HC,HS,HP,SA,FX,OH,OA,OB,OP
NOMINAL DIAMETER : 6A 200AFITTINGS : STAINLESS STEEL AND OTHERS
C330銅ソケット型 Copper socket end
This product is for copper piping. Tubes best fitted to a wide range of service conditions from straight line service to piping with a number of repeated bents may be selected.
口径 8A 80A適用チューブ HA,HB,HC,HS,HP,SA,FX,OH,OA,OB,OP
C340サニタリー金具型 Sanitary fittings end
This product is effective in cleaning piping inside and changing the types of fluid in the piping.
JIS ASTM
C330
ISO IDF
口径 6A 200A継手金具
8A 10A 15A 20A 25A 32A 40A 50A 65A 80A
150 200 250 300 350 400 450 700
口径 NOMINAL DIAMETER
最短製作長 MINIMUM LENGTH
MINIMUM LENGTH (mm)
29
9.539.62
31
12.7012.81
39
15.8816.00
47
19.0519.19
51
22.2322.36
55
25.4025.48JIS
口径 NOMINAL DIAMETER
金具寸法 FITTINGS DIMENSION
L Fitting length is the (L) section of the above figure.
25
6.356.43
59
28.5828.75
63
31.7531.83
67
34.9335.11
69
38.1038.20
63
41.2841.50
79
44.4544.55
83
50.8050.90
88
53.9854.22
93
63.5063.60
98
66.6866.96
10A 15A 20A 25A8A 32A 40A 50A 65A 80A
108
79.3879.66
PIPE OD (mm)
SOCKET ID (mm)
FITTING LENGTH (mm)
Various sanitary fittings are welded to the tube.Products are available in various specifications such as ISO, IDF.The products are amenable to degreasing cleaning as piping for food and medicines.In addition to the flexible metal hose model, a fluoroplastic hose model is available.
End socket welded with tubes.High pressure condition is possible.Any type is available on request.C330 is connected with silver soldering; therefore, the hose side of the connecting portion should be wrapped with a wet towel or similar to prevent heat from propagating to the tube when it is connected.
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER2. OVERALL LENGTH3. OPERATING CONDITION. (FLUID, TEMPERATURE, PRESSURE, MOVEMENT AND OTHERS)4. PIPE DIMENSION5. MATERIAL OF EACH PARTS
1.2.3.4.5.
1 2 3 4
1 2 3 4
LL
AL
2 3 41
23 41
1. 2.3.4.5.
PLEASE INFORM US OF THE FOLLOWING OPERATING CONDITIONS.1. NOMINAL DIAMETER 2. OVERALL LENGTH3.OPERATING CONDITION. (FLUID, TEMPERA-
TURE, PRESSURE, MOVEMENT AND OTHERS)4. PIPE DIMENSION 5. MATERIAL OF EACH PARTS
AC
CE
SS
OR
IE
S
AN
D
OT
HE
RS
38
PR
ES
SU
RE
L
OS
S
OF
T
HE
H
OS
E
39
ホースの補強ACCESSORIES AND OTHERS
Cases of reinforcement of flexible metal hoses: Flexible metal hoses can be applied to tougher services using reinforcement by various materials.
補強材の名称 形状 特長・効果 備考材質(例)PART NAME DETAIL FEATURE MATERIAL NOTE
BELLOWS CONVOLUTIONS WITH REINFORCING RING
補強リング
RUBBER COVERING
外装ゴム被覆
KEEPING WARMCOVERING
保温材被覆
THERMAL INSULATION COVERING
断熱材被覆
THERMAL INSULATION INSERTION
断熱材挿入
CORROSIN PREVENTION TAPE COVERING
防食テープ
SPRING GUARD
補強スプリング
外面インターロック
内面インターロック
フッ素樹脂インサート
INTERLOCKED HOSE LINER
INTERLOCKED HOSE COVERING
FLUORO-PLASTIC HOSE LINER
HA HB
Applicable to HA-type and HB-type tubes.
F115,F130,F135
Not applicable to F115-type, F130-type and F135-type products.
Applied on the tube or braid.
Applied on the tube or braid.
To be inserted in a spacing between the tube and the braid.
F115,F130,F135
Not applicable to F115-type, F130-type and F135-type products.
T670
Applicable to flanged products.Details available in description for T670.
Applicable to piping for solid fluids such as powders, pellets.
The interlocked hose guard is applied either to the entire length or the connect-ing portion at the tip of this product only.
The spring guard is applied either to the entire length or the connecting portion at the tip of this product only.
PRESSURE RESISTANCEFOR HIGH PRESSURE
STAINLESS STEEL
GLASS CROSSING
GLASS CROSSING
POLYETHYLENERESIN
STAINLESS STEELCARBON STEEL
STAINLESS STEELCARBON STEEL
FLUORO-PLASTIC
EPDM
EPDM
SILICONE RUBER
THERMAL INSULATION,KEEPING WARM
ANTI-CORROSIVELAYING UNDER THE GROUND
THERMAL INSULATION, KEEPING WARMSILENCE
SALT AND WATER PROOF
PROTECT AN OVERBENDINGINJURY PROTECTION
PROTECT AN OVERBENDINGINJURY PROTECTION
TURBULENT FLOWPREVENTIONFRICTION PREVENTION
ANTI-CORROSIVETURBULENT FLOWPREVENTION
FOR REFRIGERATIONKEEPING WARM
STAINLESS STEELCARBON STEEL
フレキシブルメタルホースの圧力損失PRESSURE LOSS OF THE HOSE
1mApproximate values of pressure drop per 1M of bellow length when pure water of room temperature passes through the bellows.
500 /F115 50A 500L
1m3/Hr=16.7 /500 / =29.9m3/Hr
29.9m3/Hr29.9m3/Hr50A
STEP3.
=0.015MPa1000mm
500mm
500mm0.015 500/1000=0.008 MPa
Note on the use of the diagram(Example)Fluid: water Flow rate: 500 liters/minuteTemperature: room temperature Product: F115 50A 500LPressure drop for the above is obtained as follows.
STEP1.
STEP2.STEP3.
STEP4.
STEP5.
Unit of flow rate is converted into that used in the diagram.Conversion : Flow rate 1m3/hr = 16.7 liters/minuteTherefore, 500 liters/minute = 29.9 m3/hrFind a point on the ordinate of the diagram at 29.9 m3/hr. Draw a horizontal line from the 29.9 m3/hr point of the ordinate to the point where the horizontal line meets the slanted straight line for 50 A. Draw a perpendicular straight line downward from the intersection point found in STEP 3 to the abscissa. The point where the perpendicular line meets the abscissa gives the value of the pressure drop. Value of pressure drop = 0.015 MPaSince this diagram gives pressure drop values for a tube length of 1,000 mm, the obtained value is converted to that for a length of 500 mm. The pressure drops increase and decrease in proportion to the total length.Therefore, the pressure drop for a total length of 500 mm is given by: 0.015 500/1000 = 0.008 MPa.
STEP1.
STEP2.STEP3.
STEP4.
STEP5.
MPaPRESSURE LOSS
m3/HrFLOW RATE
(kgf/cm2)
(MPa)
8A8A
10000
5000
1000
500
100
50
10.0
5.0
1.0
0.1
0.5
0.001 0.005 0.01 0.05 0.1 0.5 1.0
0.01 0.05 0.1 0.5 1.0 5.0 10.0
0.001 0.005 0.01 0.05 0.1 0.5 1.0
350A350A300A300A
250A250A
200A200A
150A150A
125A125A
100A100A
80A80A
65A65A
50A50A
40A40A
32A32A
25A25A
20A20A
15A15A
10A10A
8A
350A300A
250A
200A
150A
125A
100A
80A
65A
50A
40A
32A
25A
20A
15A
10A
Flexible metal hoses equipped with a braid cannot be extended very much beyond their free lengths. If a flexible hose is repeatedly bent, the tube is fatigued. Also, if bent in excess of its allowable practical bend radius, the pressure resistance of the flexible hose is reduced. Care must be exercised to connect a flexible hose to a pipe or a machine in such a way that the flexible hose is not twisted if the pipe or the machine moves.
81015
191914131912191119
817
615
615
512
497
252525242522251925152512251125
922
7171311
32323232323232303224321932173214321127201712
3838383838383838383438273825382138163829251715
444444444444444444444437443544294422444034242114
51515151515151515151514951455138512951514431281917
57575757575757575757575757575748573757575639352422
64646464646464646464646464646459644664646449432927
77777777777777777777777777777777776677777770634240
89898989898989898989898989898989898989898989855854
102102102102102102102102102102102102102102102102102102102102102102102
7671
115115115115115115115115115115115115115115115115115115115115115115115
9690
128128128128128128128128128128128128128128128128128128128128128128128119111
154154154154154154154154154154154154154154154154154154154154154154154154154
179179179179179179179179179179179179179179179179179179179179179179179179179
205205205205205205205205205205205205205205205205205205205205205205205205205
231231231231231231231231231231231231231231231231231231231231231231231231231
150 200 250 300 350 400 450 500 800700600 900 18001600140012001000
20
25
32
40
50
65
80
100
125150200250300350
動きのある配管のホース長さLENGTH OF HOSE FOR PIPING WITH MOVEMENT
UP12 P13
The necessary length of flexible metal hose that is subject to uneven ground settlement, to displacements by thermal deformation or by mechanical actions should be obtained from the table and methods of calculation given below. When the deflection itself and frequency of deflection are large, the use of U-shape piping is recommended. Repeated bending radius of tubes, refer to the tables on Pages 12 and 13.
ご注意 Note
1. 直線状のホースが偏心する場合 1. When a straight hose becomes eccentric
取り付け面間が拘束され変化できない場合と拘束されず変化できる場合
The hose with a braid is prevented from elongation by the outer braid. Therefore, if a hose connected in a straight line is deflected, the horizontal face-to-face distance becomes shorter depending upon the extent of deflection. For this reason, when a hose is deflected, the allowable angle deflection differs depending upon whether or not the face-to-face distance is allowed to change.
When the face-to-face distance is fixed and not allowed to change
AL=AL'
When the face-to-face distance is not fixed and allowed to change
AL AL'
AL
AL'
LATERAL DEFLECTION
AL
LATERAL DEFLECTION
AL'1
FIG.1
2FIG.2
LE
NG
TH
O
F
HO
SE
F
OR
P
IP
IN
G
WI
TH
M
OV
EM
EN
T
40
LE
NG
TH
O
F
HO
SE
F
OR
P
IP
IN
G
WI
TH
M
OV
EM
EN
T
41
LL
L : Live lengthTo obtain the entire hose length, add the lengths of joint fittings at both ends to the live length (L). The lengths of the joint fittings are given for each product model on the page showing the model number.
When applying a flexible hose to buried underground piping, apply the hose to sections where the space for the flexible hose is on the straight line between the two pipes.
L
LATERAL DEFLECTION
取り付け面間が拘束され変化できない場合 When the face-to-face distance is fixed and not allowed to change○1 ○1
5FIG.5
4FIG.4
3FIG.3
取り付け面間が拘束され変化できない場合 When the face-to-face distance is fixed and not allowed to change
81015
LIVE LENGTH
(A) 150 200 250 300 350 400 450 500 800700600 900 18001600140012001000
20
25
32
40
50
65
80
100
mm
NOMINALDIAMETER
EQUIPMENT
EQUIPMENT
MAINANCHOR
When the space for installing the flexible hose is on the straight line between the two pipes.
When a flexible hose is installed to buried underground piping.
UB,HP,OP,OU,
Please use annular profile, helical profile.Please use annular (omega) profile.
This table is not applicable to UB, HP, OP and OU tubes. Please consult us.
42 43
LE
NG
TH
O
F
HO
SE
F
OR
P
IP
IN
G
WI
TH
M
OV
EM
EN
T
LE
NG
TH
O
F
HO
SE
F
OR
P
IP
IN
G
WI
TH
M
OV
EM
EN
T
300mm400mm500mm600mm800mm1000mm
DEFLECTION (mm)
3447607399
124
3447607298
124
3447607298
124
3346597298
123
3246597298
123
2446597298
123
3346597197
123
2546597197
123
2243597197
123
口径 (A)全長F110
15 20 25 32 40 50 65 80 100
33465972
98123
2033465972
98123
2533455871
97122
3233455871
97122
4033465971
97123
50324558719097
122
65324558719097
122
80264558709096
122
100193856698995
121
125163253698894
120
1509
193452
92117
2007
162844
87116
2504
101828
5794
300300mm400mm500mm600mm750mm800mm1000mm
DEFLECTION (mm)
口径 (A)全長F115
3346597197
123
203346597191
123
253245587197
122
323045587197
122
402344587197
122
50300mm400mm500mm600mm800mm1000mm
DEFLECTION (mm)
口径 (A)全長F118
3045559095
120
323045559095
120
403045559095
120
503040558595
120
652540558595
120
802040558595
120
1001530558595
120
1251030508590
120
150
15308590
115
200
15257080
115
250
520506095
300300mm400mm500mm750mm800mm1000mm
DEFLECTION (mm)
口径 (A)全長F130
300mm400mm500mm750mm800mm1000mm
DEFLECTION (mm)
2843568894
120
1632538894
120
1327468894
120
1224408894
120
18307788
119
26468692
118
19338592
117
16297790
116
11205463
105
口径 (A)全長F135
32 40 50 65 80 100 125 150 200
304555
32304555
40304555
50300mm400mm500mm
DEFLECTION (mm)
口径 (A)全長F138
2740526591
117
152538516489
115
202437506288
114
252037506288
114
321636496288
113
402235476086
112
50300mm400mm500mm600mm800mm1000mm
DEFLECTION (mm)
口径 (A)全長S210
152336496187
113
8152336496187
113
10112234476086
111
159
2033465985
110
206
1532445783
109
25250mm300mm400mm500mm600mm800mm1000mm
DEFLECTION (mm)
口径 (A)全長S215
1. 取り付け面間が拘束され変化できない場合○1
Y=5mm 32A 40A Y=3.5mm
Y=5mm 32A 40A Y=3.5mm
Y=5mm 32A 40A Y=3.5mm
81015
191914132512211120
817
615
615
512
497
343425244422371935152912271126
922
7171311
51513837673557305424451942174014331127201712
97977472
12367
10658
102468637793576296522524034242114
124124
9592
15687
13574
13060
11049
102459838842968514431281917
153153118115182108165
93159
76137
61127
57122
48105
3784645639352422
184184144140202131199115191
93165
74153
70148
59128
46103
796749432927
243243199195240183240161240130226106212100205
84178
66147112
9670634240
280280262254281241281212281175281144277134270114235
89195151130
93855854
322322322321321304321271321225321185321174321148297115248194168121109
7671
361361361361361361361331361278361230361216361185361145307242211153137
9690
402402402402402402402399402335402280402263402226402178369292256187170119111
483483483483483483483483483462483390483366483318483252483406357265240167156
561561561561560561560561560561560509560482560423560337560530470354322226211
643643643643643643643643643643643643643609643534643434643643594452414293275
725725725725725725725725725725725722725719725659725536725725725563512367343
150 200 250 300 350 400 450 500 800700600 900 18001600140012001000
20
25
32
40
50
65
80
100
125150200250300350
7373555394508043763464275925572148163829251715
LL
X10
L 2
L : Live lengthTo obtain the entire hose length, add the lengths of joint fittings at both ends to the live length (L). The lengths of the joint fittings are given for each product model on the page showing the model number.X : The displacement, X, is absorbed not by the hose but by the piping of joints.The above table assumes the value of X in Figure 8 to be 10 percent of the live length of the tubes.
Such an event may be represented by expansion joints to buildings and seismic isolation piping where two L-shaped piping portions are used or if an elbow is used in the section of the piping to which the flexible hose is connected. Flexible hoses with braids may be used.
取り付け面間が拘束されず、変化できる場合 When the face-to-face distance is not fixed and allowed to change○2 ○2
LATERAL DEFLECTION
L
X
All these drawings are overhead views.
8FIG.8
7FIG.7
6FIG.6
取り付け面間が拘束されず変化できる場合 When the face-to-face distance is not fixed and allowed to change
81015
LIVE LENGTH
(A) 150 200 250 300 350 400 450 500 800700600 900 18001600140012001000
20
25
32
40
50
65
80
100
mm
NOMINALDIAMETER
EQUIPMENT
ELBOW
MAINANCHOR
MAINANCHORELBOW
MAINANCHOR
When two hoses are used for L-shaped piping
When a joint, such as an elbow that can absorb deflection, is installed between two fixed pipes.
UB,HP,OP,OU,
Please use annular profile, helical profile.Please use annular (omega) profile.
This table is not applicable to UB, HP, OP and OU tubes. Please consult us.
1
P38
This arrangement is applied to cases where one hose has to absorb a large deflection. Due attention should be paid to the radius of curvature when determining the total length of the hose. If the frequency of movements is high, the life of the hose may be extended by applying "reinforcement of the hose" explained on 38 pages. Please consult us.
F115F130 F135 P46
222 2 2.2.1
e 4
f 7
2. U形配管のホースが偏心する場合 2. When U-shaped pipe hose becomes eccentric.
M RL 9 R
R
U形配管で垂直移動する場合○1
This will be able to absorb a large movement. The relation among the value of movement : M, the bending radius of the hose : R, and the live length of the bellows : L, is as shown in fig. 9. R should be made larger than the repeated bending radius which is as large as possible. In addition, confirm that the hose does not come into contact with other equipment by movement.
When making vertical movement with a U-shaped installation○1
M RL 10 R
R
U形配管で水平移動する場合○2
This will be able to absorb a large movement. The relation among the value of movement : M, the bending radius of the hose : R, and the live length of the bellows : L, is as shown in fig. 10. R should be made larger than the repeated bending radius which is as large as possible. In addition, confirm that the hose does not come into contact with other equipment by movement.
When making a horizontal movement with a U-shaped installation○2
In case of vertical move.
L=4R+ 2M K=1.43R+ 2
M
In case of horizontal move.
L=4R+1.57MK 1=1.43R+0.785M K 2=1.43R+ 2
M
9FIG.9
10FIG.10
R
MOVEMENT
L
R
MOVEMENT
L
K2K1
2R M
LE
NG
TH
O
F
HO
SE
F
OR
P
IP
IN
G
WI
TH
M
OV
EM
EN
T
TH
E
IN
ST
AL
LA
TI
ON
A
GA
IN
ST
A
N
EA
RT
HQ
UA
KE
O
F
CO
NS
TR
UC
TI
ON
P
IP
IN
G建築設備配管に於ける耐震措置、および建物エキスパンションジョイント部配管要項THE INSTALLATION AGAINST AN EARTHQUAKE OF CONSTRUCTION PIPING
配管等の耐震措置
2
2
2
フレキシブルジョイント
フレキシブルジョイント
フレキシブルジョイント
44 45
F115/F118:非溶接組立型 防振継手/フレキシブルジョイント
20A25A32A40A50A65A80A
100A125A150A200A250A300A
300400400400500500500400500500600650800
500500500600600500500550650700850900
1050
500600600800800550600700800850
100010501250
600600800800
1000650700800900950
115012001450
800800800
10001000
750800850
10001050125013501600
800800
10001000
800900950
11001200140014501750
(mm)
口径NOMINAL DIAMETER
50 100 150 200 250 300
F120 P43300mm
F120 P43300mm
4746
32A40A50A65A80A
100A125A150A200A
400500550600650450500550600
550700750800900600700700800
650850900950
1050700850850950
750950
105011001200
850950950
1100
8501050115012001350
900105010501200
95012001250135014501000115011501300
(mm)
口径NOMINAL DIAMETER
50 100 150 200 250 300
F135(コネクター21 JIS20K)
300A
32A40A50A65A80A
100A125A150A200A250A
350350350350400450500550600650
450450500500550600700700800900
500550550600650700800850
10001100
600600650650700800900950
11001250
700700700700800900
1000105012501350
800800800800900
10001100115013501500
(mm)
口径NOMINAL DIAMETER
50 100 150 200 250 300
F130(コネクター21 JIS10K)
F130・F135
ステンレス鋼の耐食表
A : 0.1mm/ B : 0.1 1.0mm/*1 *2 *3
NAS No, -1-5A
1 NAS
CORROSION RATE :A : 0.1MM IN PENETRATION / WITHIN A YEARB : 0.1-1.0MM IN PENETRATION / WITHIN A YEAR
ANTI-CORROSION TABLE OF STAINLESS STEEL
濃度%(Wt) 耐食区分THE NORMAL TEMPERATURE THE MIDDLE TEMPERATURE THE HIGH TEMPERATURE
媒質CHEMICAL HUMIDITY
ACRYLONITARILE
ACETALDEHYDE
ACETONE
AMYLENE
ALLYL ALCOHL
SULFUROUS ACID GAS
BENZOIC ACIO
AMMONIA
ISOPROPYL ALCOHOL
N-ISOPROPYL ALCOHOL
ISO PHORONE
ETHYLENE
ETHYLENE GLYCOL
ETHYLENE DIAMINE
ETHYLENE DICHLORIDE
ETHYL ALCOHOL
ETHYL BENZENE
EPICHLOROHYORINE
ALLYL CHLORIDE
AMMONIUM CHLORIDE
CALCIUM CHLORIDE
IRON(II) CHLORIDE
SODIUM CHLORIDE
MAGNESIUM CHLORIDE
METHLENE CHLORIDE
HYDROCHLORIC ACID
GAS CHLORINE
FORMIC ACID
SOLUTION
SOLUTION
SOLUTION
SOLUTION
SATURATION
MOIST GAS & WATER SOLUTION
WATER SOLUTION,100%
COMPRESSED GAS & SOLUTION
SOLUTION
SOLUTION
SOLUTION & VAPOR
SOLUTION
SATURATION
SATURATION
SATURATION
SATURATION
MOIST GAS
C3H3N
CH3CHO
CH3COCH3
CH3CH
C3H6O
C6H5
NH3
(CH3)2CHOH
C9H14O
C2H4
CH2OHCH2OH
C10H16N2O8
ClCH2CH2Cl
C2H5OH
C6H5-C2H5
C3H5ClO
C3H5Cl
NH4Cl
CaCl2
FeCl3
NaCl
MgCl2
CHCl3
HCl
CH2O2
SUS304,316
SUS304,316
SUS430
SUS304,316
SUS304,316
SUS316
NAS175T,30M
SUS430,304
SUS430,304,316
SUS430,304
SUS304,316
SUS430,304
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS316
SUS304
SUS316
SUS304
SUS316
NAS175T,30M
SUS316
SUS316
NAS60-3
SUS316
NAS60-3
SUS316
SUS316
SUS304
SUS316
SUS304
NAS175T,30M
SUS316
NAS175T,30M
SUS316
NAS60-3
SUS304,316
NAS175T,30M
NAS175T,30M
SUS304,316
SUS304,316
SUS430
SUS304,316
SUS430
SUS304,316
SUS316
SUS304
SUS430,304
SUS430,304
SUS430,304
SUS304,316
SUS430,304
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS316
SUS304
SUS316
SUS304
SUS316
SUS304
SUS316
SUS316
SUS316
NAS60-3
SUS316
NAS60-3
SUS316
SUS316
SUS304
SUS316
SUS304
SUS316
SUS304
NAS175T,30M
SUS316
NAS175T,30M
SUS304,316
SUS316
SUS304
SUS316
SUS304
SUS304,316
SUS304,316
SUS430
SUS304,316
SUS430
SUS316
SUS304,316
SUS304,316
SUS430,304
SUS430,304
SUS304,316
SUS304,316
SUS304
SUS316
SUS430,304
SUS304,316
SUS304,316
SUS430,304
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304
SUS316
SUS304
SUS316
SUS304
SUS316
SUS304
SUS316
SUS304
SUS316
SUS304
SUS316
SUS304
NAS60-3
SUS316
NAS60-3
SUS316
SUS304,316
SUS430
SUS316
SUS304
SUS304, 316
SUS430
SUS316
SUS304
SUS304,316
SUS316
NAS175T,30M
SUS316
SUS430,304
SUS304,316
SUS304,316
A
A
B
A
B
A
A
A
B
A
A
B
A
A
B
A
B
A
A
A
B
A
B
C
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
B
B
B
A
B
A
A
B
A
B
*1
N-
*2*3
*2*3
*1*2
*2*3
*2*3
*2*3
*2
*1
100%
90%
5%
5 20%
20 50%
5%
1 5%
10%
5%
5%
1 5%
1 20%
1%
5%
10%
中温CORROSION RATE
常温( 30 ) 高温(沸点迄)
AN
TI
-C
OR
RO
SI
ON
T
AB
LE
O
F
ST
AI
NL
ES
S
ST
EE
L
TH
E
IN
ST
AL
LA
TI
ON
A
GA
IN
ST
A
N
EA
RT
HQ
UA
KE
O
F
CO
NS
TR
UC
TI
ON
P
IP
IN
G
48 49
濃度%(Wt) 耐食区分THE NORMAL TEMPERATURE THE MIDDLE TEMPERATURE THE HIGH TEMPERATURE
媒質CHEMICAL HUMIDITY
FORMIC ACID
O-XYLENE
P-XYLENE
FISH OIL
CITRIC ACID
GLYCERIN
CRESOL
CUMENE
CHROMIC ACID
CHLOROSULFONIC ACID
CHLOROBENZENE
WHALE OIL
CRUDE OIL
ACETIC ACID
AMYL ACETATE
ISOPROPYL ACETATE
ETHYL ACETATE
METHYL ACETATE
BUTYL ACETATE
CALCIUM HYPOCHLORITE
CARBON TETRACHLORIDE
DIISOBUTYL KETONE
DIETHANOLAMINE
DIETHYLAMINE
DIETHYLENE GLYCOL
CYCLOHEXANOL
CYCLOHEXANONE
CYCLOHEXANE
ETHYLENE BROMIDE
OXALIC ACID
TARTARIC ACID
SATURATION
VAPOR
SATURATION
CH2O2
C8H10
C3H8O3
CH3C6H4OH
C6H5CH(CH3)2
H2CrO4
HSO3Cl
C6H5Cl
CH3COOH
C4H8O2
C3H6O2
C6H12O2
(Ca(OCl)2)
CCl4
C6H10
C6H12
C2H2O4
NAS175T,30M
SUS304
SUS430
SUS316
NAS175T,30M
SUS304
SUS304,316
NAS175T,30M
SUS304,316
SUS316
SUS316
NAS175T,30M
SUS304,316
SUS430
SUS304,316
SUS430
SUS304,309S
SUS310S
NAS175T,30M
SUS304
SUS316
NAS175T,30M
SUS309S,310S
NAS175T,30M
NAS175T,30M
NAS60-3
SUS430,304
SUS316
SUS304
SUS430
SUS304,316
SUS430
SUS304,316
NAS175T,30M
SUS304,316
NAS175T,30M
SUS304,316
SUS304,316
SUS304
SUS430
SUS304
SUS430
SUS304,316
SUS304
SUS316
SUS304
NAS175T,30M
SUS316
SUS430,304
SUS316
SUS304
SUS304,316
SUS304,316
SUS304,316
SUS430,304
SUS410
SUS430,304
SUS410
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS430
SUS304,316
NAS175T,30M
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS430,304
SUS410
SUS430,304
SUS410
SUS304
SUS430
SUS304,316
SUS316
SUS304,316
SUS304,316
SUS304,316
SUS316
SUS304
SUS316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS430
SUS316
SUS304
SUS430,304
A
B
B
B
A
A
B
A
B
A
A
B
A
B
A
B
A
B
A
B
B
B
A
B
A
B
A
B
A
B
A
A
B
A
B
A
B
A
B
A
A
A
B
A
B
B
B
B
A
B
A
B
A
*1
O-
P-
*1
*2
*1 S
*1
*1*2
*2
*1
50%
15%
15%
5 10%
50%
10%
10 20%
20 100%
0 100%
0 20%
2%
10%
10%
1%
中温CORROSION RATE
常温( 30 ) 高温(沸点迄)
AN
TI
-C
OR
RO
SI
ON
T
AB
LE
O
F
ST
AI
NL
ES
S
ST
EE
L
AN
TI
-C
OR
RO
SI
ON
T
AB
LE
O
F
ST
AI
NL
ES
S
ST
EE
L
濃度%(Wt) 耐食区分THE NORMAL TEMPERATURE THE MIDDLE TEMPERATURE THE HIGH TEMPERATURE
媒質CHEMICAL HUMIDITY
TARTARIC ACID
ANIMAL OIL AND FAT
VEGETABLE OIL
NITRIC ACID
HEAVY AROMATIC NAPHTHA
CARBOLIC ACID
SODIUM HYDROXIDE
SOLVENT NAPHTHA
CARBONIC ACID
TETRACHLOROETHYLENE
MOLASSES
DODECEL BENZENE
TRICHLOROETHANE
TRICHLOROETHYLENE
TRICHLOROACETIC ACID
TOLUENE
NAPHTHENIC ACID
LACTIC ACID
PICRIC ACID
PYRIDINE
BUTYL PHTHALATE
BUTYL ALCOHOL
FURFURAL
PROPYLENE GLYCOL
N-HEXYL ALCOHOL
HEPTANE
BENZENE
PENTANE
OIL OF TRANSFORMER
BORIC ACID
MOIST GAS & WATER SOLUTION
HNO3
C6H5OH
NaOH
CHCl3
Cl3C2O2H
C6H5CH3
(CH3CH(OH)COOH)
C6H3O7N3
CH3(CH2)5CH3
C6H6
C5H12
H3BO3
SUS304,316
SUS316
SUS304
SUS430,304
SUS410
SUS430,304
SUS410
SUS304
SUS430
SUS309S,310S
SUS430,304
SUS309S,310S
SUS304
SUS309S,310S
SUS304
SUS304,316
SUS410,430
SUS304,316
SUS316
SUS304
SUS316
NAS175T,30M
SUS430,316
SUS316
SUS304
SUS316
SUS316
NAS175T,30M
SUS316
SUS304,316
SUS304,316
SUS316
SUS304
SUS430,304
SUS410
SUS430,304
SUS410
SUS430,304
SUS410
SUS430,304
SUS410
SUS304
SUS430
SUS304,309S,310S
SUS430
SUS304
SUS410,430
SUS430,304
SUS304,316
SUS430
SUS410,430,304
SUS316
SUS304
SUS316
SUS316
SUS304
SUS316
SUS304
SUS316
SUS430,304
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS430,304
SUS410
SUS430,304
SUS410
SUS430,304
SUS410
SUS430,304
SUS410
SUS430,304
SUS430,304
SUS304,316
SUS304,316
SUS430,304
SUS410
SUS430,304
SUS410
SUS430,304
SUS410
SUS316
SUS430,304
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
NAS60-2
SUS304,316
SUS304,316
SUS304,316
SUS430
SUS304,316
SUS304,316
SUS430
SUS304,316
SUS430
SUS304,316
SUS430
SUS430,304
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304,316
SUS304
SUS316
SUS304,316
SUS304,316
SUS440,304
A
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
B
A
A
B
A
A
B
A
B
A
A
A
B
A
A
B
A
B
A
B
A
B
B
B
B
A
A
A
A
B
B
B
A
*1
*2
*2
*2
*3
10%
10%
0.5%
0.5 20%
20 40%
40 70%
70 80%
80%
10%
10 30%
30 50%
70%
5%
10%
20%
50%
100%
0 100%
50%
中温CORROSION RATE
常温( 30 ) 高温(沸点迄)
50 51
AN
TI
-C
OR
RO
SI
ON
T
AB
LE
O
F
ST
AI
NL
ES
S
ST
EE
L
濃度%(Wt) 耐食区分THE NORMAL TEMPERATURE THE MIDDLE TEMPERATURE THE HIGH TEMPERATURE
媒質CHEMICAL HUMIDITY
BORIC ACID
FORMALIN
METHANOL
METHYLISOBUTYL KETONE
METHYL ETHYL KETONE
METHACRYLIC ACID METHYL
GALLIC ACID
MONO ETHANOLAMINE
MONO CHLOROACETIC ACID
MOLAR FOLIN
BUTYRIC ACID
HYDROGEN SULFIDE
SULFURIC ACID
AMMONIUM SULFATE
IRON(II)SULFATE
SODIUM SULFATE
PHOSPHORIC ACID
SATURATION
MOIST GAS & WATER SOLUTION
H3BO3
CH2O
CH4O
C6H12O
C4H8O
C5H8O2
ClCH2CO2H
H2S
H2SO4
(NH4)ZSO4
Fe2(SO4)3
Na2SO4
H3PO4
SUS430
NAS175T,30M
SUS316
SUS430,304
SUS430,304
SUS430,304
SUS304,316
SUS430
SUS430,304
SUS316
SUS304
NAS175T,30M
SUS316,316J1
NAS60-2
NAS175T,30M
NAS60-2
NAS175T,30M
NAS60-2
NAS60-2
NAS60-2
NAS60-2
NAS60-2
SUS304,316
SUS430
SUS316
SUS304
SUS304,316
SUS304,316
SUS316
SUS304
SUS316
NAS175T,30M
SUS316
NAS175T,30M
NAS175T,30M
SUS316
NAS175T,30M
SUS316
SUS304
SUS430,304
SUS430,304
SUS430,304
SUS304
SUS430
SUS430,304
SUS304,316
SUS430
NAS175T,30M
SUS304,316
SUS316,316J1
SUS304
NAS175T,30M
SUS316,316J1
SUS316J1 NAS175T,30M
SUS316
NAS175T,30M
SUS316J1
NAS175T,30M
SUS316J1
NAS60-2
NAS175T,30M
NAS60-2
NAS175T,30M
NAS60-2
SUS316J1 NAS175T,30M
NAS175T,30M
SUS304,316
NAS175T,30M
SUS316
SUS304
SUS304,316
SUS304
SUS304
SUS304,316
SUS316
SUS304
SUS316
SUS309S,310S
SUS316
SUS309S,310S
SUS316
SUS430,304
SUS430,304
SUS430,304
SUS304,316
SUS304,316
SUS304,316
SUS430,304
SUS430,304
SUS304,316
NAS60-2
SUS304,316
SUS430,304
SUS430,304
SUS316
SUS304
SUS304
SUS316,316J1
SUS304
SUS316
SUS316J1
SUS316J1
NAS175T,30M
SUS316J1
NAS175T,30M
SUS316J1
SUS316
SUS304,316
SUS316
SUS304
SUS430,304
SUS430,304
SUS430,304
SUS430,304
SUS304,316
SUS304,316
SUS430
SUS316
SUS304
SUS316
SUS309S,310S
SUS316
SUS309S,310S
B
A
B
A
A
B
B
B
A
A
B
A
B
A
A
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
A
A
B
A
B
A
B
A
B
A
B
*1
*1
*1
*1
50%
50%
0 100%
0 100%
5%
0 100%
5%
0.25%
0.25 5%
5 10%
10 25%
25 %
50 60%
60 75%
75 95%
95 100%
100%
1 5%
1 5%
5%
5 25%
25 50%
50 85%
中温CORROSION RATE
常温( 30 ) 高温(沸点迄)
DI
ME
NS
IO
N
AN
D
MA
SS
O
F
ST
EE
L
PI
PE
S鋼管の寸法と質量DIMENSION AND MASS OF STEEL PIPES
mm kg/mSGP 175A 225ASUS SUS304
NOTE : The unit of dimension is mm. The unit of mass is kg/m.Entry of 175A and 225A of SGP is omitted.For the mass of SUS TP, the value of SUS304 is shown.
6
8
10
15
20
25
32
40
50
65
80
90
100
125
150
200
250
300
350
400
450
500
550
600
650
6
8
10
15
20
25
32
40
50
65
80
90
100
125
150
200
250
300
350
400
450
500
550
600
650
1/8
1/4
3/8
1/2
3/4
1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
10
12
14
16
18
20
22
24
26
10.5
13.8
17.3
21.7
27.2
34.0
42.7
48.6
60.5
76.3
89.1
101.6
114.3
139.8
165.2
216.3
267.4
318.5
355.6
406.4
457.2
508.0
558.8
609.6
660.4
2.0
2.3
2.3
2.8
2.8
3.2
3.5
3.5
3.8
4.2
4.2
4.2
4.5
4.5
5.0
5.8
6.6
6.9
7.9
7.9
7.9
7.9
0.419
0.652
0.851
1.31
1.68
2.43
3.38
3.89
5.31
7.47
8.79
10.1
12.2
15.0
19.8
30.1
42.4
53.0
67.7
77.6
87.5
97.4
6.4
6.4
6.4
6.4
6.4
6.4
7.9
55.1
63.1
71.1
79.2
87.2
95.2
127
3.2
4.5
4.5
4.5
4.9
5.1
5.5
6.4
6.4
6.4
7.9
7.9
7.9
9.5
9.5
9.5
12.7
4.52
7.97
9.39
10.8
13.2
16.9
21.7
33.1
41.2
49.3
67.7
77.6
87.5
117
129
141
203
7.0
7.8
8.4
9.5
9.5
11.1
12.7
12.7
14.3
36.1
49.9
64.2
81.1
93.0
122
155
171
210
1.7
2.2
2.3
2.8
2.9
3.4
3.6
3.7
3.9
5.2
5.5
5.7
6.0
6.6
7.1
8.2
9.3
10.3
11.1
12.7
14.3
15.1
15.9
0.369
0.629
0.851
1.31
1.74
2.57
3.47
4.10
5.44
9.12
11.3
13.5
16.0
21.7
27.7
42.1
59.2
78.3
94.3
123
156
184
213
2.2
2.4
2.8
3.2
3.4
3.9
4.5
4.5
4.9
6.0
6.6
7.0
7.1
8.1
9.3
10.3
12.7
14.3
15.1
16.7
19.0
20.6
0.450
0.675
1.00
1.46
2.00
2.89
4.24
4.89
6.72
10.4
13.4
16.3
18.8
26.3
35.8
52.3
79.8
107
127
160
205
248
2.4
3.0
3.2
3.7
3.9
4.5
4.9
5.1
5.5
7.0
7.6
8.1
8.6
9.5
11.0
12.7
15.1
17.4
19.0
21.4
23.8
26.2
0.479
0.799
1.11
1.64
2.24
3.27
4.57
5.47
7.46
12.0
15.3
18.7
22.4
30.5
41.8
63.8
93.9
129
158
203
254
311
1.0
1.2
1.2
1.65
1.65
1.65
1.65
1.65
1.65
2.1
2.1
2.1
2.1
2.8
2.8
2.8
3.4
4.0
0.237
0.377
0.481
0.824
1.05
1.33
1.69
1.93
2.42
3.88
4.55
5.20
5.87
9.56
11.3
14.9
22.4
31.3
1.2
1.65
1.65
2.1
2.1
2.8
2.8
2.8
2.8
3.0
3.0
3.0
3.0
3.4
3.4
4.0
4.0
4.5
0.278
0.499
0.643
1.03
1.31
2.18
2.78
3.19
4.02
5.48
6.43
7.37
8.32
11.6
13.7
21.2
26.2
35.2
1.5
2.0
2.0
2.5
2.5
3.0
3.0
3.0
3.5
3.5
4.0
4.0
4.0
5.0
5.0
6.5
6.5
6.5
0.336
0.588
0.762
1.20
1.54
2.32
2.97
3.41
4.97
6.35
8.48
9.72
11.0
16.8
20.0
34.0
42.2
50.5
1.7
2.2
2.3
2.8
2.9
3.4
3.6
3.7
3.9
5.2
5.5
5.7
6.0
6.6
7.1
8.2
9.3
10.3
11.1
12.7
14.3
15.1
15.9
17.5
18.9
0.373
0.636
0.859
1.32
1.76
2.59
3.51
4.14
5.50
9.21
11.5
13.6
16.2
21.9
28.0
42.5
59.8
79.1
95.3
125
158
185
215
258
302
2.4
3.0
3.2
3.7
3.9
4.5
4.9
5.1
5.5
7.0
7.6
8.1
8.6
9.5
11.0
12.7
15.1
17.4
19.0
21.4
23.8
26.2
28.6
31.0
34.0
0.484
0.807
1.12
1.66
2.26
3.31
4.61
5.53
7.54
12.1
15.4
18.9
22.6
30.8
42.3
64.4
94.9
131
159
205
257
314
378
447
531
11.1
12.7
14.3
18.2
21.4
25.4
27.8
30.9
34.9
38.1
41.3
46.0
49.1
28.5
40.2
53.8
89.8
131
185
227
289
367
446
532
646
748
4.7
5.5
6.4
6.4
7.1
8.7
9.5
11.1
12.7
13.5
15.9
18.2
23.0
28.6
33.3
35.7
40.5
45.2
50.0
54.0
59.5
64.2
1.99
2.97
4.40
5.79
7.34
11.2
15.8
21.6
28.1
33.9
49.1
66.6
111
170
237
284
369
464
570
679
815
953
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
Sch10SCHEDULE 10
Sch20SCHEDULE 20
Sch30SCHEDULE 30
Sch40SCHEDULE 40
Sch60SCHEDULE 60
Sch80SCHEDULE 80
Sch5SSCHEDULE 5S
Sch10SSCHEDULE 10S
Sch20SSCHEDULE 20S
Sch40SCHEDULE 40
Sch80SCHEDULE 80
Sch120SCHEDULE 120
Sch160SCHEDULE 160
JIS G 3454 CARBON STEEL PIPES FOR PRESSURE PIPING (STPG)
JIS G 3454 圧力配管用炭素鋼鋼管 (STPG)JIS G 3459 STAINLESS STEEL PIPES FOR PIPING (SUS TP)
JIS G 3459 配管用ステンレス鋼鋼管 (SUS TP)
NOMINAL THICKNESS
呼厚さNOMINAL THICKNESS
呼厚さ
JIS G 3452CARBON
STEEL PIPEFOR PIPING
(SGP)
JIS G 3452配管用炭素鋼鋼管
(SGP)
OUTSIDEDIAMETER
外径
(mm)
NOMINALDIAMETER
口径
N.D.
口径
A AB厚さ
THICKMESS
質量MASS
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
厚さTHICKMESS
質量MASS
D
C
g
- h
有無 材質
標準付属
寸法
専用
専用
専用専用JIS
その他のガスケット(パッキン)との適合表
△××△○○×△△△○△○○△ー×△××○
○××○○○×○○○○○○○○ー×○×××
○×○○○○×○○○○○○○○△○○△◎○
○××○○○×○○○○○○○○ー×○×××
○△×○○○△○○○○○○○○ー○○×××
○×○○○○×××××○○○○ー○○△△○
○◎○○○○◎○○○○○○○○ー○○◎◎○
PTFE包みAS型
PTFE包みA型
ジョイントシート(ゴム)
ジョイントシート
PTFEソリッド型 ボルテックス Oリング
フレキ型番
F110F115F118F121 / F122F124 / F126F128 / F129F130F135(32A~80A)F135(100A~200A)F140(40A~100A)F140(125A~350A)F151 / F152F154 / F156F158 / F159F155T670(PTFEインサート)B710 / B720E410 / E420S210S220S222
ー○ーーーー○ー○ーーーーーーーーー○○○ ノンアスベスト ジョイントシート又はOリング
ノンアスベスト ジョイントシートノンアスベスト ジョイントシート
ノンアスベスト ジョイントシート
ノンアスベスト ジョイントシート
ノンアスベスト ジョイントシート
注. F115、F130、S210型製品は、専用ガスケット(パッキン)のみの使用となります。付属以外のガスケットをご希望の場合には、弊社指定の寸法のガスケット(パッキン)をご使用ください。記号の種類と説明 ○:普通に使用できます。 ◎:専用寸法になります。製品付属のガスケットを使用してください。 △:特殊寸法で製作すれば使用することが出来ます。 ×:使用できません。 ー:推奨いたしません。
ガスケット(パッキン)適合一覧表ACCEPTABLE TABLE OF GASKET
101520253240506580
(90)100125150200250300350400450500
(550)600
(650)700
(750)800
(850)900
17.321.727.234.042.748.660.576.389.1
101.6114.3139.8165.2216.3267.4318.5355.6406.4457.2508.0558.8609.6660.4711.2762.0812.8863.6914.4
14141616181818202224242628303436404648505254606468727476
16161820202222242628283032343840445054586266
1111222222222223333333555555
46515667768196
116132145160195230275345395440495560615670720790840900960
10201070
9095
100125135140155175200210225270305350430480540605675730795845945995
1080114012001250
口径
NOMINALDIAMETER
PIPEO.D適用する鋼管の外径
フランジの外径D
FLANGE O.DD フランジの各部寸法
ねずみ鋳鉄以外 ねずみ鋳鉄 t 径g65707590
100105120140160170185225260305380430480540605660720770850900970
103010901140
444444888888
12121216161620202024242424242428
15151519191919192323232525252727333333333939484856565656
M12M12M12M16M16M16M16M16M20M20M20M22M22M22M24M24M30 3M30 3M30 3M30 3M36 3M36 3M45 3M45 3M52 3M52 3M52 3M52 3
中心円の径C 数 径hボルトのねじの呼び
T RAISED FACE DIAMETER OFBOLT CIRCLE NUMBER OF BOLTS DIAMETER OF
BOLT HOLES
DIMENSION OF FLANGES DRILLING DIAMETEROF BOLTSボルト穴
呼び圧力20K フランジの基準寸法(JIS B 2220) BASIC DIMENSIONS OF NOMINAL PRESSURE 20K FLANGE mm
101520253240506580
(90)100125150
(175)200
(225)250300350400450500
(550)600
(650)700
(750)800
(850)900
1000(1100)
120013501500
17.321.727.234.042.748.660.576.389.1
101.6114.3139.8165.2190.7216.3241.8267.4318.5355.6406.4457.2508.0558.8609.6660.4711.2762.0812.8863.6914.4
1016.01117.61219.21371.61524.0
99
101012121414141416161818202022222424242426262626282828303232343436
1212141416161618181820202222242426283030303232323434363638384042464852
11112222222222222333333333333333333
39444959707585
110121131141176206232252277317360403463523573630680735785840890940990
10901200130514601615
75808595
115120130155180190200235265300320345385430480540605655720770825875945995
1045109511951305142015751730
口径
NOMINALDIAMETER
PIPEO.D適用する鋼管の外径
フランジの外径D
FLANGE O.DD フランジの各部寸法
ねずみ鋳鉄以外 ねずみ鋳鉄 t 径g556065759095
105130145155165200230260280305345390435495555605665715770820880930980
103011301240135015051660
4(2)4(2)4444444488888
1212121216162020202424242424242828323236
1212121215151515191919191923232323232525252527272727333333333333333333
M10M10M10M10M12M12M12M12M16M16M16M16M16M20M20M20M20M20M22M22M22M22M24M24M24M24M30M30M30M30M30M30M30M30M30
中心円の径C 数 径hボルトのねじの呼び
T RAISED FACE DIAMETER OFBOLT CIRCLE NUMBER OF BOLTS DIAMETER OF
BOLT HOLES
DIMENSION OF FLANGES DRILLING DIAMETEROF BOLTSボルト穴
呼び圧力5K フランジの基本寸法(JIS B 2220) BASIC DIMENSIONS OF NOMINAL PRESSURE 5K FLANGE mm
5352
BA
SI
C
DI
ME
NS
IO
NS
O
F
FL
AN
GE
S
BA
SI
C
DI
ME
NS
IO
NS
O
F
FL
AN
GE
S
101520253240506580
(90)100125150
(175)200
(225)250300350400450500
(550)600
(650)700
(750)800
(850)900
1000(1100)
120013501500
17.321.727.234.042.748.660.576.389.1
101.6114.3139.8165.2190.7216.3241.8267.4318.5355.6406.4457.2508.0558.8609.6660.4711.2762.0812.8863.6914.4
1016.01117.61219.21371.61524.0
1212141416161618181818202222222224242628303032323434363636384042444850
1416181820202022222224242626262830323436384042444648505252545862667074
11112222222222222333333333333333333
46515667768196
116126136151182212237262282324368413475530585640690740800855905955
100511101220132514801635
9095
100125135140155175185195210250280305330350400445490560620675745795845905970
10201070112012351345146516301795
口径
NOMINALDIAMETER
PIPEO.D適用する鋼管の外径
フランジの外径D
FLANGE O.DD フランジの各部寸法
ねずみ鋳鉄以外 ねずみ鋳鉄 t 径g65707590
100105120140150160175210240265290310355400445510565620680730780840900950
1000105011601270138015401700
4444444488888
12121212161616202020242424242828282828323640
1515151919191919191919232323232325252527272733333333333333333939394545
M12M12M12M16M16M16M16M16M16M16M16M20M20M20M20M20M22M22M22M24M24M24M30M30M30M30M30M30M30M30M36M36M36M42M42
中心円の径C 数 径hボルトのねじの呼び
T RAISED FACE DIAMETER OFBOLT CIRCLE NUMBER OF BOLTS DIAMETER OF
BOLT HOLES
DIMENSION OF FLANGES DRILLING DIAMETEROF BOLTSボルト穴
呼び圧力10K 並形フランジの基準寸法(JIS B 2220) BASIC DIMENSIONS OF NOMINAL PRESSURE 10K NORMAL FLANGE mm
フランジの基本寸法BASIC DIMENSIONS OF FLANGES
Lb/in2
54 55
SA
TU
RA
TE
D
ST
EA
M
AN
D
TH
ER
MA
L
EX
PA
NS
IO
N
OF
P
IP
E
CO
NV
ER
SI
ON
S
飽和蒸気の表(圧力を基準としたもの) SATURATED STEAM パイプの伸びの表 THERMAL EXPANSION OF PIPE
40302010
505
102030405060708090
100110120130140150160170180190200210220230240250260270280290300310320330340350360370380390400410420430440450460470480490500510520530540550560570580590600610620630640650
0.4560.3400.2260.1120.056
0.0560.1120.2260.3400.4560.5720.6890.8090.9281.0491.1711.2941.4181.5431.6681.7961.9242.0532.1832.3142.4462.5802.7142.8502.9873.1243.2623.4023.5433.6853.8283.9714.1174.2024.2104.5544.7074.8575.0075.1615.3135.4705.6265.7815.9406.0956.2546.4166.5776.7496.911
0.6910.5180.3460.1730.086
0.0860.1730.3460.5180.6910.8641.0371.2101.3821.5551.7281.9092.0902.2712.4522.6332.8142.9963.1773.3583.5393.7203.9014.0824.2634.4444.6254.8064.9875.1685.3505.5315.7175.9096.1006.2926.4846.6766.8677.0597.2517.4427.6347.8268.0178.2098.4018.5938.7848.9769.1689.3599.5519.7439.937
10.14210.34810.55310.75810.96311.16811.37411.57911.78411.98912.194
0.6740.5050.3360.1670.084
0.0840.1670.3360.5050.6740.8451.0171.1891.3621.5361.7101.8862.0622.2392.4172.5962.7752.9553.1373.3193.5013.6853.8694.0544.2404.4274.6144.8034.9925.1825.3735.5645.7575.9505.1445.3396.5346.7316.9287.1267.3257.5257.7257.9268.1288.3318.5058.7398.9459.1519.357
0.9750.7290.4850.2410.120
0.1210.2410.4850.7290.9751.2221.4701.7201.9722.2252.4792.7352.9923.2503.5103.7724.0334.2984.5644.8315.0995.3695.6405.9136.1876.4626.7397.0187.2977.5787.8618.1448.4308.7179.0059.2949.5869.878
10.17210.47810.76411.06211.36111.66211.96412.26812.57312.88013.18813.49713.808
主要配管用パイプ1M当り各温度における伸び量の差
温度 鋼管 18 - 8系ステンレス鋼 銅 アルミニウム
単位mm
飽和蒸気とパイプの伸びの表SATURATED STEAM AND THERMAL EXPANSION OF PIPE
ALUMINUMCOPPERAUSTENITIC STAINLESSSTEELS(18Cr-8Ni)CARBON STEEL
THERMAL EXPANSION IN mm PER m
TEMPERATURE
0.0010.0020.0030.0040.0050.0060.0070.0080.0090.0100.0120.0140.0160.0180.0200.0220.0260.0300.0400.0500.0600.0700.0800.090
0.100.120.140.160.180.200.220.240.260.280.30
0.320.340.360.380.400.420.440.460.480.500.520.540.560.580.600.620.640.660.680.700.720.740.760.780.800.820.850.860.880.900.920.940.960.98
1.01.1
7.3617.7124.0722.4239.7846.1351.8454.4968.2076.5083.27108.0113.7137.4142.1167.8191.2221.7290.2364.8447.3511.9684.4768.0832.6885.7
1,122.81,379.91,426.01,674.11,711.21,968.31,015.42,052.62,209.7
2.22.42.62.83.03.23.43.63.84.04.24.44.64.85.05.25.45.65.86.06.26.46.66.87.07.27.47.67.88.08.28.48.68.89.010
6.7017.2023.7728.6432.5535.8238.6641.1643.4145.4549.0552.1754.9357.4159.6661.7365.4368.6775.4180.8685.4589.4592.9996.1899.09
104.25108.74112.73116.33119.62122.64125.46128.08130.55132.88
135.08137.18139.18141.09142.92144.68146.38148.01149.59151.11152.59154.02155.41156.76158.08159.36160.61161.82163.01164.17165.31166.42167.50168.57169.61170.63171.63172.62173.58174.53175.47176.38177.28178.17179.04183.20
絶対 MPa 水銀柱 mm/Hg
圧力 飽和(沸飽)温度
PRESSURE
ABSOLUTE PRESSURE
TEMPERATURE
GAGE PRESSURE
1.21.31.41.51.61.71.81.92.02.12.22.32.42.52.62.72.82.93.03.13.23.33.43.53.63.73.83.94.04.24.44.64.85.05.56.06.57.07.58.08.59.09.5
10.010.511.011.512.013.014.015.016.017.018.019.020.021.022.0
22.07
1112131415161718192021222324252627282930313233343536373839414345474854596469747984899499
104109114119124139149159169179189199209219
229.65
187.08190.71194.13197.36200.43203.36206.16208.82211.38213.85216.23218.53220.75222.90224.98227.01228.97230.89232.77234.57236.34238.07239.76241.41243.03244.61246.16247.68249.17252.07254.86257.56260.17262.70268.69274.29279.54284.48289.17293.62297.86301.91305.80309.53313.11316.57319.90323.19329.29335.08340.55345.74350.66355.35359.82364.09368.16372.04374.15
絶対 MPa 水銀柱 mm/Hg
圧力 飽和(沸飽)温度
PRESSURE
ABSOLUTE PRESSURE
TEMPERATURE
GAGE PRESSURE
単位換算表CONVERSIONS
長さの換算表 LENGTH
m in ft yd mile10.025400.30480.9144
1609
39.371
1236
63360
3.2810.0833313
5280
1.0940.027780.33331
1760
----1
質量の換算表 WEIGHT
10.028350.4536
1000
35.271
1635270
0.001-0.00045361
2.2050.06251
2205
kg oz lb ton
力の換算表 FORCE
19.8079.4480.1383
0.102010.45360.01410
7.23370.9332.171
0.22482.20510.03108
N kgf lb f pdl
圧力の換算表 PRESSURE
atm9.869 23 10-6
9.869 23 10-1
9.678 41 10-1
19.678 41 10-5
1.315 79 10-3
6.8 10-2
mmH2O1.019 72 10-1
1.019 72 104
1.000 00 104
1.033 23 104
11.359 51 107.037 10-1
mmHg or Torr7.500 62 10-3
7.500 62 102
7.355 59 102
7.600 00 102
7.355 59 10-2
15.171 10
1.451 10-4
1.451 101.422 101.4706 101.421 10-3
1.934 10-2
1
kgf/cm2
1.019 72 10-5
1.019 7211.033 231.000 00 10-4
1.359 51 10-3
7.031 10-2
bar1 10-5
19.806 65 10-1
1.013 259.806 65 10-5
1.333 22 10-3
6.89 10-2
Pa
1 1051
9.806 65 104
1.013 25 105
9.806 651.333 22 102
6.89 103
流量の換算表 FLOW RATE
/min16.6200
1000.2060.0
128.317
3.78543.0066
ft3/min0.5887
35.3152.11890.035310.13370.10618
gal/min4.403
264.215.846
0.26417.4810.7908
/h5.544
332.6119.956
0.33269.421.2571
/sec0.2770
16.6710.01660.471950.063090.05011
m3/min0.0166710.060.0010.0283170.0037850.003006
m3/h1
603.60.061.6990.227100.1804
温度の換算表 TEMPERATURE
-30-25-20-15-10
-5-4-3-2-1012345
10111213141516171819202122232425262728293031323334354041424344454647484950556065707580859095
100110120
-22.0-13.0
-4.05.0
14.023.024.826.628.430.232.033.835.637.439.241.050.051.853.655.457.259.060.862.664.466.268.069.871.673.475.277.078.880.682.484.286.087.889.691.493.295.0
104.0105.8107.6109.4111.2113.0114.8116.6118.4120.2122.0131.0140.0149.0158.0167.0176.0185.0194.0203.0212.0230.0248.0
=5/9 -32 =9/5 +32=Celsius or Centigrade degrees=Fahrenheit degrees
面積の換算表 SQUARE
m2 a ha in2 ft2 A1
10010000
4047
0.00064520.09290
0.011
100
-
--
0.00010.011
0.4047
--
1550.0--
-
1144.0
10.761076
107639
-
0.0069441
--2.471
1
--
容積の換算表 CAPACITY
m3cm3
11000000
100016.39
283203785
0.00000110.0010.000016390.028320.003785
0.0011000
10.01639
28.323.785
0.0610261020
61.021
1728231
0.0000353135.31
0.035310.000578710.1337
-264.2
0.26420.0043297.4811
in3 ft3 u.s.gal
1
2
2
1
2
F115,F130
The products cannot be used for fluid containing acids 1 or chlorine ions. Such fluids may cause corrosion in a short period of time 2.The products are not usable in environments containing corrosivegases, or near seacoasts. Models incorporated with measures for salt corrosion should be used 2.Check with the applicable laws. For use in lines subject to legal control,select the models conforming to the applicable specifications of the Fire Protection Law, or those of the Japan Water Works Association. Confirm the operation pressure. The products can rupture if used at pressures exceeding the allowable pressure.Confirm the operation temperature. The allowable pressure varies with the operation temperature.Confirm the purpose of use. Select a model that suits the objectives of use such as alignment, seismic vibration absorption, measures against ground subsidence. If you have any doubts, please consult us.Confirm the required total length and the allowable deformation of the hose. Use of a hose at deformations exceeding the allowable limit reduces the life of the hose. Please select the right length of hose.The F140 type hose cannot absorb pulsation or vibration of piping.
1 The degree of corrosion resistance against acids varies depending upon the
kind of acids. Please consult us.
2 In certain cases, this problem can be dealt with using fluoroplastic protected
products. Please consult us.
Whenever the product comes with instruction, follow the instruction for installation. When installed to pipes, do not bend the hose too much. The radius of bending should not be smaller than the "repeated bending radius" for movable parts, and should not be smaller than the "practical bending radius" for immobile piping.Avoid twisting the flexible hose when connecting it to a pipe. The flexible hose cannot absorb twists. When the connecting fixtures are flanges, connect the hose first to the stationary object. If the connecting fixtures are screw threads, care must be exercised not to twist the hose when retightening the connection.Do not press the flexible hose when installed. The braid is an important pressure-resisting element. If a flexible hose with a braid is installed in a pressed condition, the braid is not tense but bulged. Operation with the braid bulged can reduce the strength of the hose significantly and is therefore dangerous. Confirm the gasket (packing). Confirm that the gasket (packing) is in place when installing a model intended for use with a gasket (packing).Use the gasket (packing) specified for the model. Some products come with their specified gaskets. In such a case, please use the attached gasket. Use of gaskets other than the standard gasket can cause leaks. When a change in material is desired, please consult us.Please note tightening the bolt too much when you connect the flange.Regarding the tightening of F115 and F130 flexible hose, please strictly follow our instruction of tightening torque as specified bellow.
Please read the following instructions before use. Precautions peculiar to each product are written on the page for each model. Please read it before use.
製品のお取扱いについてCAUTIONS AND HANDLING
5756
1.
2.
製品選定
製品取付
1.
2.
Selection of product
Installation of flexible hose
口径 (A) 推奨締め付けトルク・目安値 (N・m)
20~80100125150200250300
6070
110110120150160
NOMINAL DIAMETER (A) SPECIFIED TIGHTENING TORQUE (N・m)
20~80100125150200250300
6070
110110120150160
DO
'S
A
ND
D
ON
'T
S
CA
UT
IO
NS
A
ND
H
AN
DL
IN
G正しい取り付け方DO'S AND DON'TS
誤 WRONG × 正 RIGHT ○
Excessive bending damages the tube.
Use of a tube under improperly bent conditions significantly reduces the usable life of the tube.
Use of a tube under improperly bent conditions significantly reduces the usable life of the tube.
Particular attention should be given to the part where the tube is continuously bent.
Particular attention should be given to the part where the tube is continuously bent.
The twisting load that might be placed on the tube as a result of a continuous horizontal movement is very dangerous.
Excessive bending damages the tube.
Use of a tube under improperly bent conditions significantly reduces the usable life of the tube.
Do not extend one end of the rolled tube to be put into service.
If a rotating movement is transmitted to the connecting portion of a tube, the tube is twisted.
Instead of installing a bent tube, use an elbow so that the tube can be installed in a straight line.
When installing a bent tube, use a pipe so that the radius of bending of the tube is the same as or greater than the allowable curvature of the radius.
When installing a bent tube, use a pipe so that the radius of bending of the tube is the same as or greater than the allowable curvature of the radius.
U
Use a bent pipe and install the tube so that the tube forms a U-shape.
U
Use a bent pipe and install the tube so that the tube forms a U-shape.
Use of a roller that rotates synchronously with the movement of the hose prevents improper bending of the hose.
Use a half pulley to maintain the allowable radius of bending.
When installing a bent tube, use a pipe so that the radius of bending of the tube is the same as or greater than the allowable curvature of the radius.
Form a roll with the allowable radius of curvature in such a manner to accommodate the tension on the tube, and place the roll in a vertical position.
Install a rotary joint to avoid the tube being twisted.
If a tube is installed in a direction that differs from the direction of the movement, the tube is twisted.
The tube should be installed so that the centerline of the tube remains parallel to the direction of the movement.
1.5
Facilities and pipes to which a flexible hose is connected should be firmly fixed. If pressure is exerted on a hose, an extraordinarily large stress is generated. Care must be exercised not to allow the facilities to be broken. Observe the specified test pressure. The test pressure should not be greater than 1.5 times the design pressure. Do not allow the hose to be subjected to impacts. Too rapid an increase of fluid pressure can damage the hose. Care must be exercised when opening or closing valves.Provide measures such as installation of a pressure relief valve. Care must be paid to possible breakage of a hose connected to a pipe, of which the contained fluid may expand as a result of temperature rise in summer.When the pipe is washed, the corrosion resistance of the hose to the chemicals used for washing should be checked.
Hoses should be stored indoors. Keep hoses well protected from exposure to moisture, rainwater.When performing works near a hose, care must be exercised to prevent sparks or spatters from arcs, or heavy materials from falling on the hose.If a hose in service is removed and stored for reuse, the inside of the hose should be thoroughly cleaned, dried and stored.
When a hose using fluoroplastics is disposed of, please consign the product to an agent specializing in the disposal of such materials.When a hose using Asbestos is disposed of, please consign the product to an agent specializing in the disposal of such materials.
58
3.
4.
5.
運転
保管
破棄
3.
4.
5.
Utilization
Storage
Disposal
CA
UT
IO
NS
A
ND
H
AN
DL
IN
G