LTM1250/1
Technische DatenTechnical DataCaractéristiques techniques
MobilkranMobile CraneGrue automotrice
Teleskopausleger
Telescopic boom
Flèche télescopique
72 m
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
2
33,544,556789
10
1214161820222426283032343638404244
11
4648505254565860626466
33,544,556789
101112141618202224262830323436384042444648505254565860626466
25017315714413612311210293847463
15,5 m*
20,7 m 25,9 m 31,1 m 36,3 m 41,5 m 46,7 m 51,9 m 57,1 m 62,3 m
m m
15,5 m – 72 m 360° 97,5 t
Die Traglasten amTeleskopausleger.Lifting capacities ontelescopic boom.Forces de levage à la flèche télescopique.
Sein größtes Lastmoment ist 840tm.
Für die Kranberechnungen gelten die DIN-Vorschriften lt. Gesetz gemäß Bundes-arbeitsblatt von 2/85: Die Traglasten DIN/ISOentsprechen den geforderten Standsicher-heiten nach DIN 15019, Teil 2 und ISO 4305.Für die Stahltragwerke gilt DIN 15018, Teil 3.Die bauliche Ausbildung des Krans entsprichtDIN 15018, Teil 2 sowie der F. E. M.Bei den DIN/ISO-Traglasttabellen sind inAbhängigkeit von der Auslegerlänge Wind-stärken von 5 bis 7 Beaufort zulässig.Die Traglasten sind in Tonnen angegeben.Das Gewicht des Lasthakens bzw. der Haken-flasche ist von den Traglasten abzuziehen.Die Ausladungen sind von Mitte Drehkranzgemessen.Traglaständerungen vorbehalten.Traglasten über 135 t nur mit Zusatzeinrich-tungen.
When calculating crane stresses and loads,German Industrial Standards (DIN) are appli-cable, in conformity with German legislation(published 2/85): The lifting capacities(stability margin) DIN/ISO are as laid downin DIN 15019, part 2, and ISO 4305. Thecrane’s structural steel works is in accord-ance with DIN 15018, part 3. Design and con-struction of the crane comply with DIN 15018,part 2, and with F. E. M. regulations.For the DIN/ISO load charts, depending on jiblength, crane operation may be permissible atwind speeds up to 5 resp. 7 Beaufort.Lifting capacities are given in metric tons.The weight of the hook blocks and hooksmust be deducted from the lifting capacities.Working radii are measured from the slewingcentreline.Subject to modification of lifting capacities.Lifting capacities above 135 t only with specialequipments.
La grue est calculée selon normes DIN con-formément au décret fédéral 2/85. Les chargesDIN/ISO respectent les sécurités au bascule-ment requises par les normes DIN 15019, par-tie 2 et ISO 4305. La structure de la grue estconçue selon la norme DIN 15018, partie 3. Laconception générale est réalisée selon lanorme DIN 15018, partie 2, ainsi que selon lesrecommandations de la F. E. M.Les charges DIN/ISO tiennent compte d’ef-forts au vent selon Beaufort de 5 à 7 en fonc-tion de la longueur de flèche.Les charges sont indiquées en tonnes.Les poids du crochet ou de la moufle sont àdéduire des charges indiquées.Les portées sont prises à partir de l’axe derotation de la partie tournante.Charges données sous réserve de modifica-tion.Forces de levage plus de 135 t seulement avecéquipements supplémentaires.
Anmerkungen zu den Traglast-tabellen.
Remarks referring to loadcharts.
Remarques relatives aux tableauxdes charges.
1.
2.
3.4.
5.
6.7.
1.
2.
3.4.
5.
6.7.
1.
2.
3.4.
5.
6.
7.
DINISO
LTM1250/1
17617315714413612311210191837463
13513513412711510496898376695849,525,8
00000
9292929292
100100100100100
0/ 0/ 046/ 0/ 0
0/ 0/
0/46/ 00/ 0/ 0
46
46/ 0/ 046 / 046/46/46
/46
/92
0/ 00/ 0/46
46/ 0/ 046 / 0
/ 0/46
0/460/ 0/460/ 0/46
46/46/ 092 /4646 /460
/46/46/46/46
0/ 0/46
46/ 0/ 04646/4646/4646
/92/46/46/46
/46/92
92/46/ 0464646/46/9246/92/92
/46/46/46/46
92/46/46924646/46/9246/46/92
/92/46/92/46
92/46/46929246/92/9246/46/92
/92/46/92/92
92/46929292/9246/92
/92/92
TAB 131003 / 131195
IIIIIIIVV
IIIIIIIVV% %
* nach hinten / over rear / en arrière
11711711610910092857973695849,54337,532,5
8686848279746965574942,53732,528,925,821,1
717069686562585246,542,53833,53128,425,723,421,5
555554545351464238,535,532,53027,624,922,620,618,817,315
4342,540,538,53733,529,927,225,223,722,421,12018,918,117,416,816,215,414,36,3
33,533,532,531,529,226,624,322,12018,417,216151413,112,61211,611,110,610,29,8
26,226,226,224,823,321,619,918,41715,614,413,312,511,71110,39,89,28,88,37,97,67,46,6
20,720,720,619,918,917,716,515,414,413,412,511,710,910,29,698,58,17,77,476,76,46,1
1716,916,816,215,614,81413,212,411,71110,39,79,18,57,97,46,96,46,15,75,354,74,34
67,5 m 72 m
141413,913,513,112,411,71110,49,89,28,78,17,77,26,76,35,95,55,24,94,64,343,73,43,1
26,8 m
51515045413835,532,530,528,825,622,720,919,317,816,4
38,1 m
363431,529,427,325,624,121,41917,315,814,413,112,211,410,79,99,3
49,4 m
2624,723,522,420,418,516,815,314,1131211,110,29,698,47,87,36,96,66,2
60,7 m
19,419,418,517,616,515,314,313,312,411,610,910,19,58,98,37,87,476,66,25,85,55,14,8
0100100100100
00
100100100
000
100100
0000
100
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
3
33,544,556789
10
1214161820222426283032343638404244
11
4648505254565860626466
33,544,556789
101112141618202224262830323436384042444648505254565860626466
17617315714413612311210293837463
m m
15,5 m – 72 m 360° 85 t
DINISO
LTM1250/1
00000
9292929292
100100100100100
0/ 0/ 046/ 0/ 0
0/ 0/
0/46/ 00/ 0/ 0
46
46/ 0/ 046 / 046/46/46
/46
/92
0/ 00/ 0/46
46/ 0/ 046 / 0
/ 0/46
0/460/ 0/460/ 0/46
46/46/ 092 /4646 /460
/46/46/46/46
0/ 0/46
46/ 0/ 04646/4646/4646
/92/46/46/46
/46/92
92/46/46464646/46/4646/46/92
/92/46/46/46
92/46/46924646/46/9246/46/92
/92/46/92/46
92/46/46929246/92/9246/46/92
/92/46/92/92
92/46929292/9246/92
/92/92
TAB 131004 / 131196
IIIIIIIVV
IIIIIIIVV% %
* nach hinten / over rear / en arrière
1761731571441361231119989807363
13513513412711510596898173665647,525,8
1171171161091009285797366554740,535,531
86868482797469655546,54034,530,527,225,621,1
717069686562585246,54135,53329,626,62421,819,8
555554545351464238,535,532,528,725,723,120,918,917,215,715
4342,540,538,53733,529,927,225,223,722,421,12018,918,117,416,41513,812,76,3
2624,723,522,420,418,516,815,314,1131211,110,29,698,47,87,36,96,66,2
33,533,532,531,529,226,624,322,12018,417,216151413,112,61211,611,110,610,29,8
26,226,226,224,823,321,619,918,41715,614,413,312,511,71110,39,89,28,88,37,97,67,46,6
19,419,418,517,616,515,314,313,312,411,610,910,19,58,98,37,87,476,66,25,85,55,14,8
20,720,720,619,918,917,716,515,414,413,412,511,710,910,29,698,58,17,77,476,76,46,1
1716,916,816,215,614,81413,212,411,71110,39,79,18,57,97,46,96,46,15,75,354,74,34
141413,913,513,112,411,71110,49,89,28,78,17,77,26,76,35,95,55,24,94,64,343,73,43,1
15,5 m*
20,7 m 25,9 m 31,1 m 36,3 m 41,5 m 46,7 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m26,8 m 38,1 m 49,4 m 60,7 m
51515045413835,532,530,528,825,622,720,919,317,816,4
363431,529,427,325,624,121,41917,315,814,413,112,211,410,79,99,3
0000
100
000
100100
00
100100100
0100100100100
Die Traglasten amTeleskopausleger.Lifting capacities ontelescopic boom.Forces de levage à la flèche télescopique.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
4
33,544,556789
10
1214161820222426283032343638404244
11
4648505254565860626466
33,544,556789
101112141618202224262830323436384042444648505254565860626466
17617315714413612311210089797263
m m
15,5 m – 72 m 360° 72,5 t
DINISO
LTM1250/1
00000
9292929292
100100100100100
0/ 0/ 046/ 0/ 0
0/ 0/ 0
0/46/ 00/ 0/46
46/ 0/ 046 / 046/46/46
/46
/92
0/ 00/ 0/46
46/ 0/ 046 / 0
/ 0/46
0/460/ 0/460/ 0/46
46/46/ 092 /4646 /460
/46/46/46/46
0/ 0/46
46/ 0/ 04646/4646/4646
/92/46/46/46
/46/92
92/46/46464646/46/4646/46/92
/92/46/46/46
92/46/46924646/46/9246/46/92
/92/46/92/46
92/46/46929246/92/9246/46/92
/92/46/92/92
92/46929292/9246/92
/92/92
TAB 131005 / 131197
IIIIIIIVV
IIIIIIIVV% %
* nach hinten / over rear / en arrière
1761731571441361231099786776963
1351351341271151059686777063524525,8
1171171161091009285776963524437,532,528,5
86868482797469625143,5373229,427,12421,1
717069686562585244,538,53530,526,623,52118,817
555554545351464238,53429,525,722,720,117,917,11614,613,4
4342,540,538,53733,529,927,225,223,722,421,12018,816,915,313,912,611,510,46,3
33,533,532,531,529,226,624,322,12018,417,216151413,112,61211,610,89,998,3
26,226,226,224,823,321,619,918,41715,614,413,312,511,71110,39,89,28,88,37,97,56,96,3
20,720,720,619,918,917,716,515,414,413,412,511,710,910,29,698,58,17,77,476,665,5
1716,916,816,215,614,81413,212,411,71110,39,79,18,57,97,46,96,46,15,75,34,84,23,83,4
141413,913,513,112,411,71110,49,89,28,78,17,77,26,76,35,95,55,24,94,64,33,83,32,92,6
Die Traglasten amTeleskopausleger.Lifting capacities ontelescopic boom.Forces de levage à la flèche télescopique.
Its maximum load moment is 840tm.
15,5 m*
20,7 m 25,9 m 31,1 m 36,3 m 41,5 m 46,7 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m26,8 m 38,1 m 49,4 m 60,7 m
51515045413835,532,530,528,825,622,720,919,317,816,4
363431,529,427,325,624,121,41917,315,814,413,112,211,410,79,99,3
2624,723,522,420,418,516,815,314,1131211,110,29,698,47,87,36,96,66,2
19,419,418,517,616,515,314,313,312,411,610,910,19,58,98,37,87,476,66,25,85,55,14,8
0100100100100
00
100100100
000
100100
0000
100
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
5
Die Hubhöhen.Lifting heights.Hauteurs de levage.
Teleskopausleger.Telescopic boom.Flèche télescopique.
LTM1250/1
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
6
LTM1250/1
15,5 m – 72 m 12,2 m* 360° 85 t
Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.
DINISO
3,544,556789
101112141618202224262830323436384042444648505254565860626466687072747678
3,544,556789
101112141618202224262830323436384042444648505254565860626466687072747678
16,516,21615,815,41514,514,113,212,311,49,98,77,66,65,95,3
12,2 m 12,2 m 12,2 m 12,2 m 12,2 m 12,2 m
15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
46/ 092/4692/9246/9246/92
00000
92/46/ 092/92/9292/92/9246/92/9246/46/92
92/4692/9292/9292/9246/92
9292929292
100100100100100
TAB 131132.1/7 / 131142.1/7 / 131152.1/7
IIIIIIIVV
IIIIIIIVV%
m m
%* einteilige Klappspitze / one-parted folding jib / fléchette pliante à 1 élément
13,513,112,411,811,210,710,39,69,18,37,36,35,5
9,49,49,18,98,58,28,17,86,66,6
16,516,516,31615,715,314,914,514,113,412,611,911,110,59,89,38,88,37,87,46,96,66,365,75,43,9
13,312,712,111,611,210,810,510,19,89,69,39,18,98,78,37,87,476,66,365,75,5
9,49,298,88,78,58,48,38,28,18,187,97,87,47,16,76,465,7
14,414,414,414,21413,813,513,212,611,811,110,49,79,18,67,97,36,96,56,25,95,65,35,14,84,64,34,1
12,612,111,611,210,810,510,29,99,79,49,18,88,27,67,16,66,25,95,55,254,74,54,34
9,39,18,98,88,68,58,48,38,28,187,97,87,36,86,45,95,65,354,84,5
12121211,811,711,611,110,49,99,38,88,37,87,36,96,565,65,35,14,84,64,34,13,93,73,53,3
11,511,310,910,610,3109,79,498,587,57,16,66,25,85,45,14,94,64,44,243,73,53,3
8,98,88,68,58,48,38,28,187,97,77,36,86,465,65,24,94,64,44,23,93,73,5
9,69,69,69,69,69,59,28,88,58,27,97,57,16,76,465,65,354,74,44,13,83,53,332,82,62,42,22
9,69,69,39,18,88,48,17,77,47,16,86,56,25,95,55,24,94,54,243,73,43,232,72,52,32,1
8,38,28,187,97,77,47,16,86,66,36,15,75,354,74,44,13,83,53,22,92,72,4
8,18,18,18,18,17,97,77,47,16,86,56,35,95,65,34,94,64,34,13,83,53,33,12,92,72,62,42,221,81,61,4
8,18,18,187,77,47,16,96,76,46,15,85,55,14,84,54,243,73,53,232,82,62,42,221,81,61,4
7,97,87,57,376,76,56,265,75,454,74,44,13,93,63,43,12,92,72,52,221,8
Couple de charge maxi.: 840tm.
Fortsetzung
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
7
LTM1250/1
15,5 m – 72 m 22 m* 360° 85 t
DINISO
44,556789
101112141618202224262830323436384042444648505254565860626466687072747678808284
44,556789
101112141618202224262830323436384042444648505254565860626466687072747678808284
7777776,96,76,66,56,25,95,65,35,14,94,84,64,343,6
22 m 22 m 22 m 22 m 22 m 22 m
15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
46/ 092/4692/9246/9246/92
00000
92/46/ 092/92/9292/92/9246/92/9246/46/92
92/4692/9292/9292/9246/92
9292929292
100100100100100
TAB 131132.3/7 / 131142.3/7 / 131152.3/7
IIIIIIIVV
IIIIIIIVV%
m m
%* zweiteilige Klappspitze / bi-parted folding jib / fléchette pliante à 2 éléments
665,75,45,24,94,74,54,44,34,143,8
4,74,54,34,143,93,83,8
777776,96,86,66,56,46,26,15,95,85,65,55,35,25,154,94,84,84,74,64,44,34,13,93,8
65,95,75,65,45,35,254,94,84,74,74,64,54,44,44,34,24,24,14443,93,8
4,74,64,54,44,34,24,14,1443,93,93,93,83,83,83,83,83,83,83,8
6,66,66,66,66,56,46,36,26,165,95,85,65,55,45,35,25,154,94,84,74,44,243,83,63,43,33,12,92,8
5,85,65,55,35,25,154,94,84,74,64,54,54,44,44,44,34,24,143,93,73,53,33,12,9
4,64,64,54,44,34,24,24,14,1443,93,93,93,93,83,83,83,83,73,53,33,1
5,95,95,95,95,95,85,85,75,65,55,55,45,35,25,154,94,84,74,64,343,83,63,43,232,92,82,62,52,42,3
5,35,25,154,94,84,74,64,64,54,44,44,34,34,34,24,143,83,53,33,232,82,72,62,42,3
4,44,44,34,24,24,14,143,93,93,93,83,83,83,83,83,83,63,53,33,12,92,72,5
5,45,45,45,35,35,25,25,15,1554,94,94,84,74,64,64,44,243,73,53,33,12,92,72,52,42,22,11,91,81,61,41,3
4,94,84,74,74,64,54,44,44,34,24,24,24,14,143,93,83,63,43,22,92,72,52,32,221,81,71,51,3
4,24,24,1443,93,93,83,83,73,73,73,73,73,73,73,53,33,12,82,62,42,221,81,6
4,84,84,84,84,84,74,74,64,64,64,54,54,54,44,343,83,63,43,232,82,62,52,32,221,81,71,51,31,21
4,54,54,44,44,34,34,24,24,14,1443,93,73,53,33,12,92,72,52,42,221,91,71,51,31,21
443,93,83,83,73,73,73,63,63,63,53,53,53,43,22,92,72,52,32,221,81,61,41,1
Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
8
LTM1250/1Die Hubhöhen.Lifting heights.Hauteurs de levage.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
9
LTM1250/1
15,5 m – 72 m 19,2 m* 360° 85 t
DINISO
44,556789
1011121416182022242628303234363840424446485052545658606264666870727476788082
44,556789
1011121416182022242628303234363840424446485052545658606264666870727476788082
10,510,510,410,2109,89,69,398,78,27,77,16,66,25,75,14,74,23,8
19,2 m 19,2 m 19,2 m 19,2 m 19,2 m 19,2 m
15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
46/ 092/4692/9246/9246/92
00000
92/46/ 092/92/9292/92/9246/92/9246/46/92
92/4692/9292/9292/9246/92
9292929292
100100100100100
TAB 131132.2/7 / 131142.2/7 / 131152.2/7
IIIIIIIVV
IIIIIIIVV%
m m
%* zweiteilige Klappspitze / bi-parted folding jib / fléchette pliante à 2 éléments
8,88,58,27,676,565,75,35,14,94,5
5,85,45,24,94,84,74,64,6
10,510,510,310,1109,89,59,28,98,78,48,27,97,67,37,16,86,66,46,15,95,75,45,24,94,74,54,24
8,78,48,17,87,57,276,76,56,36,15,95,85,65,45,35,25,154,94,84,74,54,24
5,85,75,55,45,35,25,154,94,84,84,74,74,74,64,64,64,64,64,5
9,59,59,39,298,88,78,48,287,87,67,47,276,76,56,25,85,454,74,44,243,83,63,43,23,1
87,87,67,37,16,86,66,46,265,95,75,65,55,35,25,14,94,64,34,13,93,73,53,33,1
5,85,75,55,45,35,25,154,94,94,84,84,74,74,74,64,64,44,243,73,53,3
887,97,87,77,67,57,47,37,176,86,76,56,35,95,65,34,94,64,343,83,73,53,33,232,82,72,52,4
7,27,16,96,76,56,36,165,85,75,55,45,35,25,14,94,64,343,73,53,33,132,82,72,52,4
5,55,45,35,25,154,94,84,84,74,74,64,64,64,54,54,23,93,63,43,23,12,92,7
6,86,86,86,76,76,66,66,56,46,36,26,15,95,75,45,14,84,54,343,83,63,33,12,92,62,42,32,121,81,61,5
6,36,26,165,85,75,65,55,35,25,154,94,74,54,34,13,83,63,33,12,92,62,42,221,91,71,5
5,25,154,94,84,74,74,64,64,54,54,44,44,34,343,73,53,232,72,52,32,11,9
5,95,95,95,95,85,85,75,75,65,55,35,14,84,64,44,13,93,73,53,332,82,72,52,32,121,81,61,41,31,11
5,75,65,55,45,35,25,154,94,84,64,44,243,73,53,33,12,92,72,52,32,121,81,61,41,21
4,84,84,74,74,64,54,54,44,44,34,34,243,83,53,332,82,62,42,221,81,61,41,2
Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.
Fortsetzung
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
10
LTM1250/1
15,5 m – 72 m 29 m* 360° 85 t
Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.
DINISO
56789
10111214161820222426283032343638404244464850525456586062646668707274767880828486
56789
10111214161820222426283032343638404244464850525456586062646668707274767880828486
5,35,35,35,35,35,35,254,74,44,23,93,73,53,43,232,92,82,72,62,5
29 m 29 m 29 m 29 m 29 m 29 m
15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
46/ 092/4692/9246/9246/92
00000
92/46/ 092/92/9292/92/9246/92/9246/46/92
92/4692/9292/9292/9246/92
9292929292
100100100100100
TAB 131132.5/7 / 131142.5/7 / 131152.5/7
IIIIIIIVV
IIIIIIIVV%
m m
%* dreiteilige Klappspitze / three-parted folding jib / fléchette pliante à 3 éléments
4,13,83,63,43,232,92,72,62,52,42,42,4
2,92,82,72,52,42,42,32,32,32
5,35,35,35,35,25,14,94,74,54,44,24,143,83,73,63,53,43,33,33,23,132,92,82,82,72,72,62,62,52,5
4,13,93,83,73,53,43,33,23,132,92,92,82,82,72,72,62,52,52,52,42,42,42,32,32,3
2,92,92,82,72,62,62,52,52,42,42,42,42,32,32,32,32,32,32,32,32,32,3
4,84,84,84,84,84,74,64,44,34,243,93,83,73,63,53,43,33,23,1332,92,92,82,72,72,62,52,42,32,22,1
3,83,73,63,53,43,33,23,132,92,82,82,72,72,72,62,62,52,52,52,42,42,42,42,32,32,22,1
2,82,82,72,62,62,52,52,52,42,42,32,32,32,32,22,22,22,22,22,22,22,22,2
4,24,24,24,24,24,24,143,93,83,73,63,53,43,33,23,13,132,92,92,82,82,82,72,52,42,32,22,121,91,81,71,6
3,53,53,43,33,23,1332,92,82,72,72,72,62,62,62,52,52,52,52,42,42,42,32,22,121,91,81,7
2,62,62,62,52,52,52,42,42,42,32,32,32,32,22,22,22,22,22,22,22,22,22,11,91,7
3,73,73,73,73,73,73,73,63,53,43,33,23,23,1332,92,92,82,82,72,72,62,52,32,221,91,71,51,41,21,1
3,23,23,1332,92,82,82,72,62,62,62,52,52,52,52,42,42,42,42,42,42,32,121,81,61,41,31,1
2,42,42,42,42,42,42,32,32,32,32,22,22,22,22,22,22,22,22,22,22,11,91,71,51,21
3,23,23,23,23,23,23,23,23,23,1332,92,92,82,82,72,72,62,52,32,221,91,71,61,41,31,21
2,92,92,92,82,72,72,62,62,52,52,52,42,42,42,42,32,32,32,32,22,11,91,81,61,41,31,1
2,32,32,32,32,32,32,32,22,22,22,22,22,22,22,22,22,22,121,81,61,41,21
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
11
Die Hubhöhen.Lifting heights.Hauteurs de levage.
Klappspitze.Folding jib.Fléchette pliante.
LTM1250/1
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
12
LTM1250/1
15,5 m – 72 m 26,2 m* 360° 85 t
Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.
DINISO
4,556789
101112141618202224262830323436384042444648505254565860626466687072747678808284
4,556789
101112141618202224262830323436384042444648505254565860626466687072747678808284
6,86,86,86,86,86,86,76,56,25,85,454,64,34,13,83,63,43,33,132,8
26,2 m 26,2 m 26,2 m 26,2 m 26,2 m 26,2 m
15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
46/ 092/4692/9246/9246/92
00000
92/46/ 092/92/9292/92/9246/92/9246/46/92
92/4692/9292/9292/9246/92
9292929292
100100100100100
TAB 131132.4/7 / 131142.4/7 / 131152.4/7
IIIIIIIVV
IIIIIIIVV%
m m
%* dreiteilige Klappspitze / three-parted folding jib / fléchette pliante à 3 éléments
6,86,86,86,86,86,66,36,15,85,65,45,254,84,64,44,34,143,93,83,73,63,53,43,33,23,132,92,9
6,26,26,26,26,165,85,65,45,254,94,74,54,44,24,143,93,83,73,63,53,43,33,232,92,72,62,52,42,2
5,45,45,45,45,35,35,254,94,74,64,44,34,24,13,93,83,73,73,63,53,43,232,92,72,62,42,32,22,121,91,8
4,54,54,54,54,54,54,54,44,34,24,143,93,83,73,63,63,53,43,33,232,82,72,52,32,221,81,61,51,31,21
44444443,93,93,93,83,73,63,53,53,43,33,23,12,92,72,52,32,221,91,71,61,41,31,1
5,14,84,44,13,93,63,43,23,12,92,82,72,7
5,14,94,74,54,44,24,13,93,83,73,63,53,43,33,23,13,132,92,92,82,82,72,72,72,7
4,74,64,44,34,143,93,83,73,63,53,43,33,33,23,1332,92,92,82,82,72,72,62,52,42,2
4,34,24,13,93,83,73,63,53,43,33,33,23,23,13,1332,92,92,82,82,62,52,42,32,22,11,91,8
3,83,83,73,63,53,43,43,33,23,23,13,1332,92,92,92,82,82,72,52,42,221,91,71,51,31,1
3,53,53,43,33,23,23,13,132,92,92,92,92,82,82,82,72,52,32,221,81,71,51,31,21
3,43,33,12,92,82,72,62,62,6
3,43,43,33,23,132,92,92,82,82,72,72,72,72,62,62,62,62,62,62,62,6
3,33,33,23,1332,92,82,82,82,72,72,72,62,62,62,62,62,62,62,62,62,5
3,23,13,132,92,92,82,82,72,72,72,72,72,62,62,62,62,62,62,62,52,32,22,1
332,92,92,82,82,82,72,72,72,62,62,62,62,62,62,62,62,52,32,11,91,71,51,31,1
2,82,82,82,72,72,62,62,62,52,52,52,52,52,52,52,52,42,221,81,61,41,21
Fortsetzung
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
13
LTM1250/1
15,5 m – 72 m 36 m* 360° 85 t
DINISO
6789
10111214161820222426283032343638404244464850525456586062646668707274767880828486889092
6789
10111214161820222426283032343638404244464850525456586062646668707274767880828486889092
3,63,63,63,63,63,63,63,43,232,82,62,52,32,22,121,91,91,81,71,71,61,51,5
36 m 36 m 36 m 36 m 36 m 36 m
15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
46/ 092/4692/9246/9246/92
00000
92/46/ 092/92/9292/92/9246/92/9246/46/92
92/4692/9292/9292/9246/92
9292929292
100100100100100
TAB 131132.6/7 / 131142.6/7 / 131152.6/7
IIIIIIIVV
IIIIIIIVV%
m m
%* vierteilige Klappspitze / four-parted folding jib / fléchette pliante à 4 éléments
3,53,53,53,53,53,43,33,23,12,92,82,72,62,52,52,42,32,22,12,1221,91,91,81,81,81,71,71,71,61,61,61,5
3,23,23,23,23,23,23,12,92,82,72,62,52,52,42,32,32,22,12,1221,91,91,91,81,81,81,71,71,71,61,61,51,51,51,5
2,82,82,82,82,82,82,72,72,62,52,42,32,32,22,22,12,1221,91,91,81,81,81,71,71,71,71,61,61,61,51,41,31,21,11
2,42,42,42,42,42,42,42,32,32,22,22,12,1221,91,91,91,81,81,81,71,71,71,71,61,61,51,31,21
222222222221,91,91,91,81,81,81,71,71,71,71,61,61,41,31,21
2,52,52,42,32,121,91,81,81,71,61,61,51,51,41,4
2,52,52,42,32,22,12,121,91,91,81,81,81,71,71,71,61,61,61,61,51,51,51,51,41,41,41,4
2,32,32,32,22,12,121,91,91,81,81,81,71,71,71,61,61,61,61,61,51,51,51,51,41,41,41,41,4
2,12,12,1221,91,91,81,81,71,71,71,61,61,61,61,61,61,51,51,51,51,41,41,41,41,41,31,31,21,1
1,91,91,91,91,91,81,81,71,71,71,61,61,61,61,51,51,51,51,51,51,51,41,41,41,41,31,21
1,71,71,71,71,71,71,61,61,61,61,51,51,51,51,51,41,41,41,41,41,31,31,21,1
1,81,71,71,61,51,51,41,41,41,4
1,71,71,71,61,61,61,51,51,51,51,51,51,41,41,41,41,41,41,41,41,41,4
1,61,61,61,61,51,51,51,51,51,51,41,41,41,41,41,41,41,41,41,41,41,41,4
1,51,51,51,51,51,51,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,31,3
1,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,31,31,1
1,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,21,1
Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
14
Die Hubhöhen.Lifting heights.Hauteurs de levage.
Klappspitze.Folding jib.Fléchette pliante.
LTM1250/1
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
15
LTM1250/1
15,5 m – 51,9 m0°14 m – 42 m 360° 85 t
DINISO
Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.
33,54
56789
10111214161820222426283032343638404244
4,5
4648505254565860626466687072747678808284
33,544,556789
101112141618202224262830323436384042444648505254565860626466687072747678808284
17,917,917,917,917,717,316,816,115,214,213,212,310,697,76,55,54,63,93,1
14 m 14 m
15,5 m + 1,5 m*
m m
51,9 m + 1,5 m*
21 m 21 m28 m 28 m35 m 35 m42 m 42 m
* Adapter / adapter / pièce d’adaptateur
00000
TAB 131502.1/2
IIIIIIIVV
IIIIIIIVV% %
92/4692/9246/9246/4646/46
13,613,613,413,212,812,311,811,41110,79,99,28,37,46,45,54,74,13,632,5
9,79,498,68,387,46,96,465,75,354,64,23,63,22,82,421,6
6,46,25,75,34,94,64,343,73,53,33,12,82,62,52,321,71,41,1
4,74,44,13,83,53,332,82,62,42,32,22,11,91,81,71,61,51,41,1111
17,917,917,917,517,116,615,915,114,113,312,411,610,810,19,48,78,17,576,45,95,55,14,84,44,13,73,4
13,413,112,612,111,711,310,910,510,19,89,498,58,17,67,16,66,25,75,34,94,64,23,93,73,43,12,92,6
9,79,38,98,58,27,87,57,276,76,46,265,85,65,45,35,14,94,74,54,23,83,63,33,12,92,72,52,32,11,9
6,96,76,46,15,95,65,45,14,94,74,54,34,243,83,73,63,43,33,23,12,92,82,72,62,52,52,32,121,81,61,51,3
5,254,84,64,44,243,83,63,53,33,232,92,72,62,52,42,42,32,22,12,121,91,81,71,71,61,61,51,51,31,21
Fortsetzung
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
16
LTM1250/1
57,1 m – 72 m0°14 m – 35 m 360° 85 t
DINISO
11121416182022242628303234363840424446485052545658606264666870727476788082
11121416182022242628303234363840424446485052545658606264666870727476788082
14,514,514,414,313,913,412,912,211,510,810,19,58,98,47,87,36,86,35,85,454,74,44,13,83,53,232,7
14 m 21 m
57,1 m + 1,5 m*
m m
67,5 m + 1,5 m*
21 m 21 m28 m 28 m 35 m35 m 28 m14 m 35 m35 m
92/4692/9292/9246/9246/46
TAB 131502.3/4/5
IIIIIIIVV
IIIIIIIVV% %
9292929292
100100100100100
62,3 m + 1,5 m*
14 m
92/46929292
46 92
92/92/92/
/
42 m
72 m +1,5 m*
10,810,810,510,310,2109,89,48,98,487,57,16,76,35,95,55,24,84,44,13,83,63,43,22,92,72,52,32,11,9
8,58,487,77,57,276,86,56,36,15,95,75,65,45,35,14,84,54,23,93,63,43,12,82,62,52,42,221,91,71,51,3
6,36,15,95,65,45,254,84,64,44,34,143,83,73,63,43,33,33,23,132,92,72,42,221,91,81,71,51,31,21
4,54,34,243,93,73,63,43,33,132,92,82,72,52,42,42,32,22,12,1221,91,81,81,61,51,31,21,11
11,611,511,411,110,710,39,99,48,98,47,97,476,66,15,75,454,64,343,83,63,43,232,72,52,32,1
8,68,68,68,58,58,387,87,57,16,86,56,25,95,65,34,94,64,343,73,43,22,92,82,62,52,32,221,91,71,5
6,96,96,86,66,46,36,165,85,65,55,35,14,94,64,44,23,93,73,53,232,82,62,32,22,11,91,81,71,61,41,21,1
5,35,14,94,84,64,54,34,24,13,93,83,73,63,53,43,33,23,132,82,62,42,221,91,71,61,41,31,21,11
8,78,78,78,68,58,287,87,57,16,86,56,25,95,75,354,74,44,13,83,53,22,92,72,52,32,11,91,71,51,3
6,86,86,86,86,66,56,36,15,95,65,45,254,84,64,44,23,93,73,43,232,82,52,32,11,91,71,51,41,21
5,35,35,35,35,25,14,94,84,64,44,24,13,93,83,63,53,43,23,12,92,72,52,32,11,91,81,61,41,21
2,72,72,72,72,72,72,72,72,62,52,32,22,11,91,81,61,51,3
3,73,73,73,73,73,73,73,63,53,43,23,132,92,72,62,52,42,32,22,11,91,71,61,41,31,11
* Adapter / adapter / pièce d’adaptateur
Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
17
LTM1250/1
15,5 m – 51,9 m20°14 m – 42 m 360° 85 t
DINISO
89
10111214161820222426283032343638404244464850525456586062646668707274767880828486
89
10111214161820222426283032343638404244464850525456586062646668707274767880828486
16,115,314,513,813,112119,47,96,55,44,33,4
14 m 14 m
15,5 m + 1,5 m*
m m
51,9 m + 1,5 m*
21 m 21 m28 m 28 m35 m 35 m42 m 42 m
* Adapter / adapter / pièce d’adaptateur
00000
TAB 131522.1/2
IIIIIIIVV
IIIIIIIVV% %
92/4692/9246/9246/4646/46
109,698,587,67,36,96,25,34,43,62,8
6,25,85,45,14,84,64,44,243,93,632,41,9
4,13,83,53,33,12,92,72,62,52,42,32,32,21,91,5
2,92,72,52,32,221,91,81,71,61,61,51,41,41,41,31
15,414,71413,412,912,411,911,511,110,39,798,47,87,26,76,25,75,34,94,54,1
9,49,18,88,68,38,17,97,77,67,47,27,16,96,66,25,85,34,94,64,23,93,63,3
65,85,65,55,35,154,94,74,64,54,44,34,24,143,93,93,83,63,43,12,82,62,3
43,93,73,63,43,33,23,132,92,82,72,62,62,52,52,42,32,32,32,32,32,22,221,8
2,62,52,42,32,22,12,121,91,91,81,71,71,61,61,61,51,51,41,41,41,41,41,41,41,31,21
Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.
Fortsetzung
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
18
LTM1250/1
57,1 m – 72 m20°14 m – 35 m 360° 85 t
DINISO
18202224262830323436384042444648505254565860626466687072747678808284
18202224262830323436384042444648505254565860626466687072747678808284
13,713,112,712,111,61110,59,99,38,78,17,67,16,66,15,65,24,84,64,23,93,63,2
14 m 21 m
57,1 m + 1,5 m*
m m
67,5 m + 1,5 m*
21 m 21 m28 m 28 m35 m 28 m14 m 35 m35 m
92/4692/9292/9246/9246/46
TAB 131522.3/4/5
IIIIIIIVV
IIIIIIIVV% %
100100100100100
62,3 m + 1,5 m*
14 m
9292929292
Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.
Der LTM 1250/1 hat für jeden Einsatzdie passende Ausrüstung.
* Adapter / adapter / pièce d’adaptateur
42 m 35 m
72 m +1,5 m*
92/4692/9292/9292/9246/92
8,68,48,287,87,67,57,47,276,76,35,95,55,14,84,44,13,83,53,232,82,52,3
5,65,45,35,154,84,74,64,54,44,34,24,24,1443,73,53,22,92,72,52,32,221,8
3,73,63,43,33,23,132,92,92,82,72,62,52,52,42,42,42,32,32,22,221,81,71,61,41,21
2,42,32,32,22,1221,91,81,81,71,71,61,61,61,51,51,51,41,41,41,41,31,21,1
10,610,29,99,59,18,78,37,97,57,26,96,56,15,75,34,94,54,23,93,73,43,232,7
7,87,67,47,26,96,76,46,15,95,65,45,14,94,74,443,73,53,232,82,62,42,32,11,9
5,154,84,74,64,54,44,34,34,24,143,93,73,53,43,12,92,62,42,32,11,91,81,71,61,4
3,33,23,13,132,92,82,82,72,62,62,52,42,42,42,32,32,32,11,91,71,51,41,31,11
8,48,17,87,57,276,76,46,25,95,65,45,14,94,64,343,73,43,22,92,72,52,221,8
6,36,15,95,75,55,25,14,94,74,54,44,243,83,63,53,332,82,52,42,221,71,51,31,1
4,64,54,44,34,143,83,73,53,43,33,232,92,82,72,62,52,32,11,91,71,51,31,1
2,72,62,62,52,52,42,42,32,22,1221,91,81,71,61,41,21,1
32,92,82,82,72,62,62,52,52,52,42,32,22,22,121,91,81,71,51,41,21,1
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
19
LTM1250/1
15,5 m – 51,9 m40°14 m – 42 m 360° 85 t
DINISO
1214161820222426283032343638404244464850525456586062646668707274
1214161820222426283032343638404244464850525456586062646668707274
12,511,710,810,19,27,665,4
14 m 14 m
15,5 m + 1,5 m*
m m
51,9 m + 1,5 m*
21 m 21 m28 m 28 m35 m 35 m
* Adapter / adapter / pièce d’adaptateur
00000
TAB 131542.1/2
IIIIIIIVV
IIIIIIIVV% %
9292464646
42 m 42 m
7,376,86,66,46,25,24
4,54,34,13,93,83,73,63,63,53,5
2,72,52,42,32,22,22,12,12,12,1
1,71,61,51,41,41,31,31,31,31,31,3
12,211,911,511,210,810,510,3109,89,38,687,56,9
7,27,176,96,86,76,66,56,56,46,36,265,65,2
4,44,34,24,143,93,83,83,73,73,73,63,63,63,63,6
2,62,52,52,42,42,32,32,22,22,22,22,12,12,12,12,12,1
1,41,41,31,31,31,31,31,31,31,3
Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.
Fortsetzung
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
20
LTM1250/1
57,1 m – 67,5 m40°14 m – 35 m 360° 85 t
DINISO
2224262830323436384042444648505254565860626466687072747678
2224262830323436384042444648505254565860626466687072747678
11,511,210,910,610,39,99,498,47,87,36,86,35,95,4
14 m 21 m
57,1 m + 1,5 m*
m m
67,5 m + 1,5 m*
21 m 21 m28 m 28 m35 m 28 m 35 m14 m 35 m
9292924646
TAB 131542.3/4/5
IIIIIIIVV
IIIIIIIVV% %
9292929292
62,3 m + 1,5 m*
14 m
9292929246
Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.
42 m
6,96,86,76,76,66,56,56,46,46,25,85,45,14,74,3
4,24,143,93,93,83,83,73,73,63,63,63,63,63,63,53,2
2,52,42,42,32,32,32,22,22,22,22,12,12,12,12,12,12,1
1,41,31,31,31,31,31,31,31,31,31,31,3
9,79,498,68,27,87,57,26,96,66,35,95,55,14,74,3
6,66,56,46,36,15,95,65,45,254,74,54,343,73,4
43,93,93,83,83,73,73,63,63,63,63,53,43,33,22,92,72,5
2,42,32,32,32,22,22,22,12,12,12,12,12,12,12,12,121,8
7,77,57,26,96,76,56,25,95,75,45,254,84,54,23,8
5,65,45,254,94,74,54,44,34,13,93,73,63,43,232,7
3,83,73,73,63,63,53,33,23,132,92,82,72,62,42,32,2
2,22,22,22,12,12,12,12,12,12,12,1221,91,81,71,51,3
* Adapter / adapter / pièce d’adaptateur
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
21
LTM1250/1Die Hubhöhen.Lifting heights.Hauteurs de levage.
Feste Gitterspitze.Lattice fly jib.Fléchette treillis fixe.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
22
LTM1250/1
789
1011121416182022242628303234363840424446485052545658606264666870
789
1011121416182022242628303234363840424446485052545658606264666870
504947,546,54645,543,53727,2
21 m 28 m 35 m 35 m42 m 42 m49 m 49 m56 m 56 m 63 m63 m 17,5 m17,5 m 21 m 28 m
15,5 m + 3 m* 25,9 m + 3 m*
* Adapter / adapter / pièce d’adaptateur
m m
17,5 m – 70 m82°15,5 m – 25,9 m 360° 72,5 t
DINISO
00000
4646000
TAB 131313.1/2
IIIIIIIVV
IIIIIIIVV% %
70 m70 m
4847464544434236,529,3
35,535343332,531,529,725,220,615,6
27,126,425,725,224,724,42422,319,416,613,5
2120,720,319,919,519,21918,417,616,815,413,511,48,5
16,416,21615,815,515,315,114,914,714,614,313,812,410,99,57,9
12,812,612,512,312,11211,911,811,511,31110,710,410,39,98,97,96,84,9
10,1109,89,79,69,49,298,78,58,287,77,57,37,16,96,76,65,84,7
7,57,16,76,46,15,85,55,254,74,44,23,93,73,53,33,12,92,82,62,42,32,22,2
39,539,539,539,539,539,536,5
35,535,535,53535353530,5
27,627,327,126,926,926,926,725,822,415,5
21,120,920,720,620,620,620,620,520,118,115,3
16,616,516,416,216,116,116,116,115,915,615,114,112,49
13,11312,812,712,612,612,512,512,512,412,412,412,411,710,38,6
10,310,210,1109,99,89,89,79,69,49,298,88,78,68,58,47,8
8,28,187,97,97,87,77,77,67,57,47,276,96,76,66,56,36,26,15,2
6,46,25,95,65,45,24,94,74,54,243,83,63,43,23,12,92,72,62,52,32,22,1
Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.
The LTM 1250/1 can be equippedto tackle any job.
Fortsetzung
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
23
LTM1250/1
1112141618202224262830323436384042444648505254565860626466
1112141618202224262830323436384042444648505254565860626466
26,726,726,726,726,726,7
17,5 m 21 m 28 m 35 m 42 m 49 m 56 m 63 m 17,5 m 21 m 28 m 35 m 42 m 49 m 56 m
36,3 m + 3 m* 46,7 m + 3 m*
m m
17,5 m – 70 m82°36,3 m – 46,7 m 360° 72,5 t
DINISO
* Adapter / adapter / pièce d’adaptateur
92464600
9246464646
TAB 131313.3
IIIIIIIVV
IIIIIIIVV% %
23,723,623,623,523,523,523,5
18,418,318,318,218,218,218,218,218,2
14,714,614,514,514,414,414,414,414,414,414,4
11,811,711,611,511,511,511,511,511,511,511,511,511,5
9,39,39,29,29,19,19,19,19,19,19,19,19,19,19,19,1
7,47,47,37,37,27,27,27,27,27,27,27,27,27,27,27,27,27,2
5,85,85,75,75,75,75,65,65,65,65,65,65,65,65,65,65,65,65,55,55,3
16,616,516,516,516,5
14,714,614,514,514,514,514,5
11,511,411,311,311,311,311,311,311,3
8,98,88,88,78,78,78,78,78,78,78,7
7,17776,96,96,96,96,96,96,96,96,9
5,45,45,45,35,35,35,35,35,35,35,35,35,35,35,3
3,93,93,93,93,93,93,93,93,93,93,93,93,93,93,93,93,93,9
Fortsetzung
Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
24
LTM1250/1
1618202224262830323436384042444648
1618202224262830323436384042444648
9,99,99,89,89,8
17,5 m 17,5 m 17,5 m21 m 21 m 21 m28 m 28 m 28 m35 m 35 m42 m
57,1 m + 3 m* 62,3 m + 3 m*
m m
17,5 m – 70 m82°57,1 m – 67,5 m 360° 72,5 t
DINISO
* Adapter / adapter / pièce d’adaptateur
9292924646
9292929292
TAB 131313.4
IIIIIIIVV
IIIIIIIVV% %
67,5 m + 3 m*
9292929246
8,88,78,78,68,68,6
6,76,66,66,66,66,66,66,6
5,15554,94,94,94,94,94,9
3,53,53,53,53,53,53,53,53,53,53,53,53,5
7,57,47,37,37,3
6,46,46,46,36,36,3
4,84,74,74,74,74,64,64,6
3,13,13,13,13,13,13,13,13,13,13,1
5,45,35,35,3
4,64,54,54,54,5
2,82,82,82,82,82,82,8
Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
25
LTM1250/1Die Hubhöhen.Lifting heights.Hauteurs de levage.
Wippbare Gitterspitze.Luffing lattice jib.Fléchette treillis relevable.
Teleskopausleger / Telescopic boom / Flèche télescopique: 82°
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
26
LTM1250/1
1214161820222426283032343638404244464850525456586062646668707274
1214161820222426283032343638404244464850525456586062646668707274
46,54542,537,532
17,5 m17,5 m 21 m21 m 28 m28 m 35 m35 m 42 m42 m 49 m49 m 56 m56 m 63 m63 m 70 m70 m
15,5 m + 3 m* 25,9 m + 3 m*
m m
17,5 m – 70 m75°15,5 m – 25,9 m 360° 72,5 t
DINISO
Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.
* Adapter / adapter / pièce d’adaptateur
00000
TAB 131343.1/2
IIIIIIIVV
IIIIIIIVV% %
4646000
42403836,532,5
32,531,530,529,929,527,32317,8
24,824,123,523,122,822,62118,315,3
19,819,318,818,418,117,917,616,916,114,912,910,7
15,415,114,814,514,314,214,1141413,512,210,79,3
12,111,911,811,511,311,211,11110,710,510,310,19,88,97,86,4
9,49,39,18,98,68,48,27,97,77,57,37,16,96,76,66,45,8
6,15,85,55,24,94,74,44,23,93,73,53,33,12,92,72,52,42,32,22,1
3837,535,533,5
34,53433,532,530,529,4
26,325,925,625,525,324,722,4
20,320,220,119,919,819,819,819,818,415,4
15,915,815,715,615,615,615,515,314,814,413,1
12,512,412,312,212,212,112,112,112,112,112,112,110,99,1
9,79,69,59,59,49,39,29,18,98,88,68,58,48,48,2
7,77,77,67,67,57,57,47,37,176,86,76,56,46,36,26,15,6
5,35,14,84,64,44,243,83,63,43,232,82,72,52,42,32,22,1
La LTM 1250/1possède l'équipementqui convient à chaque problème.
Fortsetzung
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
27
LTM1250/1
182022242628303234363840424446485052545658606264666870
182022242628303234363840424446485052545658606264666870
25,925,924,623,3
17,5 m 17,5 m 21 m21 m 28 m28 m 35 m35 m 42 m42 m
36,3 m + 3 m*
m m
17,5 m – 63 m75°36,3 m – 67,5 m 360° 72,5 t
DINISO
* Adapter / adapter / pièce d’adaptateur
92464600
9246464646
TAB 131343.3
IIIIIIIVV
IIIIIIIVV% %
46,7 m + 3 m*
56 m56 m 49 m49 m 63 m
23,12322,421,320,3
17,917,917,817,717,116,516,2
14,214,214,114,114,114,113,913,513,3
11,311,311,211,211,211,211,211,211,211,110,9
998,98,98,88,88,88,88,88,88,88,88,8
7,17,17,177777777777
5,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,4
16,216,115,715,2
14,214,214,113,713,4
1111111110,810,6
8,58,58,58,48,48,48,48,4
6,76,76,76,76,76,76,76,76,76,7
4,94,94,94,94,94,94,94,94,94,94,94,9
3,33,33,33,33,33,33,33,33,33,33,33,33,33,3
2830323436384042444648505254
2830323436384042444648505254
9,49,1
17,5 m 17,5 m 17,5 m21 m 21 m 21 m28 m 28 m 28 m35 m 35 m42 m
57,1 m + 3 m*
m m
* Adapter / adapter / pièce d’adaptateur
9292924646
9292929292
9292929246
TAB 131343.4
IIIIIIIVV
IIIIIIIVV% %
67,5 m + 3 m*62,3 m + 3 m*
8,48,38,27,9
6,46,46,46,36,1
4,54,54,54,54,54,54,54,5
2,92,92,92,92,92,92,92,92,9
76,8
6,16,165,8
4,14,14,14,14,1
2,52,52,52,52,52,5
4,84,8 3,9
3,9 2,22,22,22,22,2
Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
28
LTM1250/1Die Hubhöhen.Lifting heights.Hauteurs de levage.
Wippbare Gitterspitze.Luffing lattice jib.Fléchette treillis relevable.
Teleskopausleger / Telescopic boom / Flèche télescopique: 75°
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
29
LTM1250/1
1618202224262830323436384042444648505254565860626466687072747678
1618202224262830323436384042444648505254565860626466687072747678
38,538,536,532,5
17,5 m17,5 m 21 m21 m 28 m28 m 35 m35 m 42 m42 m 49 m49 m 56 m56 m 63 m63 m 70 m70 m
15,5 m + 3 m* 25,9 m + 3 m*
m m
17,5 m – 70 m68°15,5 m – 25,9 m 360° 85 t
DINISO
Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.
* Adapter / adapter / pièce d’adaptateur
00000
4646000
TAB 131372.1/2
IIIIIIIVV
IIIIIIIVV% %
3734,5333225,2
29,12827,226,624,820,4
22,72221,621,421,219,716,9
17,817,41716,816,716,115,414,112,2
14,414,113,813,513,413,413,413,41311,810,3
11,311,110,910,710,610,610,510,310,1109,68,77,4
8,88,68,48,287,77,57,37,16,96,76,56,46,3
4,94,74,44,243,73,53,33,12,92,72,62,42,32,22,1
33,53128,927,5
30,528,426,625,1
24,823,922,821,720,720,1
19,31918,818,517,917,216,6
15,215,114,914,914,914,814,513,913,2
11,911,911,811,811,811,811,811,811,711,1
9,39,39,29,198,98,78,68,58,48,48,3
7,37,37,37,37,27,16,96,86,66,56,36,26,16,1
4,54,34,13,93,73,53,33,132,82,62,52,32,22,12,1
Fortsetzung
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
30
LTM1250/1
26283032343638404244464850525456586062646668707274
26283032343638404244464850525456586062646668707274
19,918,717,7
17,5 m 21 m 28 m 35 m 35 m42 m 42 m49 m 49 m56 m 56 m63 m 17,5 m 21 m 28 m
36,3 m + 3 m* 46,7 m + 3 m*
* Adapter / adapter / pièce d’adaptateur
m m
17,5 m – 63 m68°36,3 m – 67,5 m 360° 85 t
DINISO
92464600
9246464646
TAB 131372.3
IIIIIIIVV
IIIIIIIVV% %
18,417,316,4 15,6
14,814,113,512,9
13,212,612,111,611,110,7
1110,910,710,3109,69,38,98,7
8,78,78,78,78,68,387,87,57,3
6,96,96,96,96,96,96,86,66,46,26,16
5,25,25,25,25,25,25,25,25,25,254,94,8
13,112,411,8
1211,410,8 9,8
9,49,18,78,3
7,97,77,47,276,8
6,36,36,165,95,75,55,3
4,54,54,54,54,54,54,54,34,2
3,13,13,13,13,13,13,13,13,13,13,1
3638404244464850525456586062
3638404244464850525456586062
76,7
17,5 m 21 m 28 m 28 m 28 m35 m 35 m42 m
57,1 m + 3 m* 67,5 m + 3 m*
* Adapter / adapter / pièce d’adaptateur
m m
9292924646
9292929292
TAB 131372.4
IIIIIIIVV
IIIIIIIVV% %
62,3 m + 3 m*
9292929246
6,26
4,94,74,54,3
3,73,53,43,33,2
2,62,62,52,42,32,32,2
3,12,92,8 2,1
2,121,9
1,81,81,8
Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
31
LTM1250/1Die Hubhöhen.Lifting heights.Hauteurs de levage.
Wippbare Gitterspitze.Luffing lattice jib.Fléchette treillis relevable.
Teleskopausleger / Telescopic boom / Flèche télescopique: 68°
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
32
LTM1250/1
3950
4000
14.00 R 25
16.00 R 25
3800
3850
2612
2552
3705
3755
2996
3046
2015
2065
330
380
400
450
15°
17°
17°
19°
11°
13°
A A B C D E F G α b b1
* abgesenkt / lowered / abaissé
Maße / Dimensions / Encombrement mm
150 mm*
Die Maße.Dimensions.Encombrement.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
33
LTM1250/1
12 12 12 12 12 12 72t
1 2 3 4 5 6AchseAxle
Essieu
AntriebeDrive
Mécanismes
stufenlosinfinitely variableen continu
SeilØ / SeillängeRope diameter / Rope length
Diamètre du câble / Longueur du câble
Max. SeilzugMax. single line pullEffort au brin maxi.
m/min für einfachen Strangm/min single linem/min au brin simple
m/min für einfachen Strangm/min single linem/min au brin simple
ca. 60 s bis 82° Auslegerstellungapprox. 60 seconds to reach 82° boom angleenv. 60 s jusqu’à 82°
ca. 450 s für Auslegerlänge 15,4 m – 72 mapprox. 450 seconds for boom extension from 15,4 m – 72 menv. 450 s pour passer de 15,4 m – 72 m
Gesamtgewicht tTotal weight (metric tons)
Poids total t
Die Gewichte.Weights.Poids.
Die Geschwindigkeiten.Working speeds.Vitesses.
1
360°
2
%%
km/h
km/h
2000150014501040870500
175142108703110,5
181410631
–
39 %
–
43 %
97531–
13
8
15
8
22
13
24
14
34
20
37
22
50
29
55
32
70
40
76
44
12
7
14
7,5
0 – 135 23 mm / 360 m 105 kN
0 – 130 23 mm / 425 m 105 kN
0 – 1,6 min-1
1 12 23 34 45 5R R
Traglast tLoad (metric tons)Forces de levage t
1)
1)
1)
RollenNo. of sheaves
Poulies
SträngeNo. of lines
Brins
Gewicht kgWeight kgPoids kg
1) Es gelten die jeweiligen Ländervorschriften.The safety regulations of the respective country shall be applicable.Les spécifications de sécurité du pays concerné seront en vigueur.
14.00 R 25 16.00 R 25
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
��
Rahmen:Abstützungen:
Gitterspitzen:
2. Hubwerk:Zusatzballast:
Motor:
Klappspitzen:
Getriebe:
Achsen:
Federung:Gelenkwellen:
Bereifung:
Bereifung:
Lenkung:
Antrieb 12 x 8:Telma-Wirbelstrombremse:
Weitere Zusatzausrüstung auf Anfrage.
Bremsen:
Fahrerhaus:
Elektr. Anlage:
Eigengefertigte, verwindungssteife Kastenkonstruktion aus hochfestem Feinkorn-Baustahl.Vier hydraulisch ausfahrbare Schiebeholme mit hydraulischen Abstützzylindern und Drucktellern.Der vordere Stützkasten ist zwischen den Achsen 2 und 3, der hintere Stützkasten am Fahrgestell-heck angeordnet. Abstützbasis: 8,8 m längs x 8,5 m quer.
Einfach-Klappspitze 12,2 m lang, unter 0°, 20° oder 40° zum Teleskopausleger anbaubar.Doppel-Klappspitze 12,2 m – 22 m lang, unter 0°, 20° oder 40° zum Teleskopausleger anbaubar.
Automatik-Getriebe, Fabrikat Allison, Typ CLBT 755, mit Drehmomentwandler und Strömungs-bremse. 5 Vorwärts- und 1 Rückwärtsgang. Verteilergetriebe, 2-stufig, mit Verteilerdifferentialund Geländestufe.Wartungsarme Kranfahrzeugachsen. Alle 6 Achsen gefedert. Achsen 1 bis 3 sowie 5 und 6 gelenkt.Achsen 1, 5 und 6 sind Planetenachsen, Achse 5 mit Zwischenachsdifferential, alle angetriebenenAchsen mit Querdifferentialsperren.
Alle Achsen sind hydropneumatisch gefedert mit automatischer Niveauregulierung. Achsdruck-ausgleich zwischen den Achspaaren 1 + 2, 3 + 4 und 5 + 6. Federung hydraulisch blockierbar.
Alle Gelenkwellen mit 70° Kreuzverzahnung und wartungsfrei.
12fach, alle Achsen einzeln bereift. Reifengröße: 14.00 R 25.
12fach, alle Achsen einzeln bereift. Reifengröße 16.00 R 25.
ZF-Halbblock-Hydrolenkung, 2-Kreisanlage mit hydraulischer Servoeinrichtung und zusätzlicherReservepumpe, von der Achse angetrieben.
Zusätzlich wird die 3. Achse angetrieben.An der 4. Achse angebaut, zur Erhöhung der Dauerbremsleistung.
Betriebsbremse: Allrad-Servo-Druckluftbremse, 2-Kreisanlage.Zusatzbremsen: Auspuffklappenbremse mit Liebherr-Zusatzbremssystem, Retarder imAutomatikgetriebe.Handbremse: Federspeicher auf alle Räder der 2. bis 6. Achse wirkend.Großräumige Kabine in Stahlblechausführung, Kataphorese tauchgrundiert, gummielastischaufgehängt, Sicherheitsverglasung, Bedienungs- und Kontrollinstrumente.Moderne Datenbus-Technik zur Steuerung der elektrischen und elektronischen Komponenten,24 Volt Gleichstrom, 2 Batterien mit je 170 Ah, Beleuchtung nach StVZO.
8-Zylinder-Diesel, Fabrikat Liebherr, Typ D 9408 TI-E, wassergekühlt, Leistung nach DIN440 kW (598 PS) bei 1900 min nach ECE-R 24.03 und 2001/27/EG (Euro 3), max. Drehmoment2600 Nm bei 1400 min , Kraftstoffbehälter: 600 l.
-1
-1
Feste Gitterspitze 14 m – 42 m lang, unter 0°, 20° oder 40°, wippbare Gitterspitze 17,5 m – 70 mlang.Für den 2-Hakenbetrieb bzw. zum Verstellen der wippbaren Gitterspitze.2 zusätzliche seitliche Einhängeklötze à 12,5 t für einen Gesamtballast von 97,5 t.
Das Kranfahrgestell.
Rahmen:
Kranmotor:
Kranantrieb:Steuerung:
Hubwerk:
Wippwerk:Drehwerk:Krankabine:
Sicherheits-einrichtungen:Ballast:Teleskopausleger:
Elektr. Anlage:
Eigengefertigte, verwindungssteife Schweißkonstruktion aus hochfestem Feinkorn-Baustahl.Als Verbindungselement zum Kranfahrgestell dient eine Rollendrehverbindung, dieunbegrenztes Drehen ermöglicht.
Über zwei 4fach Handsteuerhebel, selbstzentrierend. Elektronische Steuerung über die LICCON-Anlage. Stufenlose Regulierung aller Kranbewegungen durch Verstellen der Hydraulikpumpen,zusätzliche Geschwindigkeitsregelung durch Verstellen der Dieselmotor-Drehzahl.Axialkolben-Verstellmotor, Liebherr-Seilwinde mit eingebautem Planetengetriebe und feder-belasteter Haltebremse.1 Differentialzylinder mit Sicherheitsrückschlagventil.Hydromotor, Planetengetriebe, Drehwerksritzel und federbelasteter Haltebremse.Kabine in verzinkter Stahlblechausführung pulverbeschichtet, Sicherheitsverglasung,Bedienungs- und Kontrollinstrumente. Kabine um 20° nach hinten neigbar.LICCON-Überlastanlage, Testsystem, Hubendbegrenzung, Sicherheitsventile gegen Rohr- undSchlauchbrüche.72,5 t Ballast bestehend aus: 1 Grundplatte 10 t, 3 Teile à 12,5 t, 2 seitliche Einhängeklötze à 12,5 t.1 Anlenkstück und 5 Teleskopteile. Alle Teleskope separat ausschiebbar über das Schnelltakt-Teleskopiersystem TELEMATIK.Auslegerlänge: 15,4 m – 72 m.
Moderne Datenbus-Technik, zur Steuerung der elektrischen und elektronischen Komponenten,24 Volt Gleichstrom, 2 Batterien mit je 170 Ah.
4-Zylinder-Diesel, Fabrikat Liebherr, Typ D 924 TI-E, wassergekühlt, Leistung nach DIN 180 kW(245 PS) bei 1800 min , max. Drehmoment 1080 Nm bei 1150 min . Kraftstoffbehälter: 250 l-1 -1
Diesel-hydraulisch mit 5 Axialkolben-Verstellpumpen mit Servosteuerung und Leistungsregelung.
Der Kranoberwagen.
Die Zusatzausrüstung.
LTM1250/1
Zwischenstücke: 2 Zwischenstücke à 7 m lang zur Verlängerung der Doppelklappspitze auf 29 m bzw 36 m.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
��
LTM1250/1
Frame:
Outriggers:
Lattice jibs:Intermediate sections:
2nd hoist gear:Additional counterweight:
Engine:
Folding jibs:
Transmission:
Axles:
Suspension:
Tyre equipment:
Cardan shaft:
Tyre equipment:
Steering:
Drive 12 x 8:TELMA-type eddycurrent brake:
Further equipment available on request.
Brakes:
Driving cab:
Electrical system:
Liebherr designed and manufactured, box-type, torsion resistant design of high-tensile finegrained structural steel.Four hydraulically extendable sliding beams with hydraulic jacks and supporting pads. The frontoutrigger casing is mounted between axles 2 and 3 and the rear casing is located at the rear ofthe carrier. Supporting basis: 8,8 m longitudinally x 8,5 m transversally.
Single folding jib, 12,2 m long, for mounting on telescopic boom at 0°, 20° or 40°.Double folding jib, 12,2 m to 22 m long, for mounting on telescopic boom at 0°, 20° or 40°.
Automatic transmission, make Allison, type CLBT 755, with torque converter and hydrodynamic brake,5 forward speeds, 1 reverse. Two stage transfer case with transfer differential and off-road ratio.
Crane carrier axles of minor maintenance. All axles suspended. Axles 1 to 3 and 5 and 6 steered.Axles 1, 5 and 6 are planetary axles, intermediate differential at axle 5, all driven axles withtransverse differential locks.
All axles with hydropneumatic suspension and automatic levelling system. Load equalizationbetween the axle pairs 1 + 2, 3 + 4 and 5 + 6. The suspension can be locked hydraulically.12 tyres, all axles equipped with single tyres.Size of tyres: 14.00 R 25.
All cardan shafts with 70° diagonal toothing and maintenance-free.
12 tyres, all axles with single tyres. Tyre size 16.00 R 25.
ZF semi-integral power steering, dual circuit system with hydraulic servo-system and additionalbacking pump driven by an axle.
Axle 3 additionally driven.Fitted to the 4 axle for increasing the sustained-action braking performance.th
Service brake: All-wheel servo-air brake, dual circuit system.Supplementary brakes: Exhaust brake with Liebherr supplementary brake system, retarder in theautomatic transmission.Hand brake: Spring-loaded, acting on all wheels of axles 2 to 6.Spacious sheet steel cab, cataphoretic dip-primed, mounted on rubber shock absorbers, safety glasswindows, operating and control elements.Modern data bus technique for the control of the electric and electronic components.24 Volt DC, 2 batteries of 170 Ah each, lighting according to traffic regulations.
8-cylinder Diesel engine, make Liebherr, type D 9408 TI-E, watercooled, output acc. to DIN440 kW (598 HP) at 1900 min acc. to ECE-R 24.03 and 2001/27/EG (Euro 3), max. torque2600 Nm at 1400 min . Fuel tank: 600 l.
-1
-1
Fixed lattice jib 14 m to 42 m long, installation at 0°, 20° or 40°, luffing lattice jib 17,5 m to 70 m long.2 intermediate sections of 7 m each for the extension of the biparted swing-away jib to 29 m or 36 m.
For 2-hook operation or for operating the luffing lattice jib.2 additional lateral hang on slabs of 12,5 t each for a total counterweight of 97,5 t.
Crane carrier.
Complementary equipment.
Frame:
Crane engine:
Crane drive:
Crane control:
Hoist gear:
Luffing gear:Slewing gear:Crane cab:
Safety devices:
Counterweight:
Telescopic boom:
Electric system:
Liebherr-made torsion resistant, welded construction of high-tensile structural steel, linked tocarrier by a roller slewing rim for 360° continuous rotation.
Two self-centering control levers (joy-sticks). Electronic control by means of the LICCON system,infinitely variable crane motions through displacement control of the hydraulic pumps.Additional working speed control by variation of the Diesel engine speed.Axial piston variable displacement motor, Liebherr hoist drum with integrated planetary gearand spring-loaded static brake.1 differential hydraulic rams with nonreturn valve.Hydraulic motor, planetary gear, slewing pinion and spring-loaded static brake.Galvanized steel construction, powder coating, safety glazing, operating and control elements.Cab tiltable backwards by 20°.LICCON safe load indicator, test system, hoist limit switches, safety valves against rupture ofpipes and hoses.72,5 t counterweight comprising 1 basic slab of 10 t and 3 slabs of 12,5 t each,2 lateral hang on slabs of 12,5 t each.1 base section and 5 telescopic sections. All telescopic sections extendable individually by meansof the rapid-cycle telescoping system TELEMATIK.Boom length 15,4 m to 72 m.
Modern data bus technique for the control of the electric and electronic components,24 Volt DC, 2 batteries of 170 Ah each.
4-cylinder Diesel engine, make Liebherr, type D 924 TI-E, watercooled, output acc. to DIN180 kW (245 HP) at 1800 min , max. torque 1080 Nm at 1150 min . Fuel tank capacity: 250 l-1 -1
Diesel-hydraulic, with 5 axial piston variable displacement pumps, with servo-control andcapacity control.
Crane superstructure.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
LTM1250/1
Châssis:
Stabilisateurs:
Fléchettes:Deuxième treuil:
Moteur:
Fléchettes pliante:
Boîte de vitesse:
Essieux:
Arbres articulés:Suspension:
Pneumatiques:
Pneumatiques:
Contrepoidscomplémentaire:
Direction:
Entraînement 12 x 8:Frein Telma:
Autres équipement supplémentaires sur demande.
Freins:
Cabine:
Installation électrique:
Fabrication Liebherr, construction en caisson indéformable, en acier à haute résistance à grainsfins.Quatre poutres horizontales télescopiques, avec vérins hydrauliques de calage verticaux et patins.Les caissons de poutres de calage avants sont situés entre les essieux 2 et 3, et les caissons despoutres de calage arrières sont situés à l'arrière du châssis. Surface de calage: 8,8 m en long et8,5 m travers.
Fléchette pliante, 12,2 m, pour le montage à la flèche télescopique à 0°, 20° ou 40°.Fléchette pliante double, 12,2 m à 22 m, pour montage à la flèche télescopique à 0°, 20° ou 40°.
Boîte automatique de marque Allison, type CLBT 755, avec convertisseur de couple et ralentisseurhydraulique intégré. Cinq rapports avants et 1 rapport arrière. Boîte de transfert à 2 rapports avecblocage de différentiel et étage vitesses terrain.
Essieux de la grue exempts d'entretien, les 6 essieux sont suspendus. Les essieux 1 à 3, 5 et 6 sontdirecteurs. Les essieux 1, 5 et 6 sont des essieux planétaires, entraînés, différentiel intermédiaire àl'essieu 5, tous les essieux moteurs sont munis de dispositifs de blocage du différentiel transversal.Tous les arbres articulés à denture étagée de 70° et exempts d'entretien.Tous les essieux sont suspendus hydropneumatiquement avec mise à niveau et équilibrage entreessieux automatiques. Egalisation de la charge par essieu entre essieux 1 + 2, 3 + 4 et 5 + 6.Suspension blocable hydrauliquement.12 roues à monte simple. Taille: 14.00 R 25
12 fois, tous les essieux munis de roues simples. Taille 16.00 R 25.2 blocs latéraux de suspension de 12,5 t pour un contrepoids total de 97,5 t.
Direction semi-bloc ZF, à double circuit, assistée hydrauliquement, avec pompe auxiliaireentraînée par un essieu.
3ème essieu est entraîné additionnellement.Monté sur le 4ème essieu pour augmenter la puissance de freinage continu.
Frein de service: à double circuit assisté pneumatiquement, sur toutes les roues.Freins supplémentaires: frein à clapet d'échappement avec systèm de freinage supplémentaireLiebherr, ralentisseur dans la boîte automatique.Frein de secours et frein à main: par cylindres à ressorts sur les essieux 2 à 6.Cabine spacieuse, tôle d'acier, revêtue anti-corrosion par bain de cataphorèse, suspendue sursilent blocs, vitrage de sécurité, tableau de bord complet.Technologie de bus de données moderne pour la commande des composants électriques etélectroniques, courant continu 24 Volts, 2 batteries de 170 Ah chacune, éclairage conforme aucode de la route.
Diesel 8 cylindres, marque Liebherr, type D 9408 TI-E, refroidi par eau, puissance selon DIN440 kw (598 ch) à 1900 min selon ECE-R 24.03 et 2001/27/EG (Euro 3), couple max. 2600 Nm à1400 min . Réservoir à carburant: 600 l.
-1
-1
Fléchette fixe de 14 m à 42 m; montable à 0°, 20° ou 40° fléchette à volée variable de 17,5 m à 70 m.Pour le travail avec 2 crochets ou le relevage de la fléchette à volée variable.
Châssis porteur.
Châssis:
Moteur:
Entraînement:Commande:
Treuil:
Relevage de flèche:Orientation:Cabine de grue:
Sécurités:
Contrepoids:
Construction mécanosoudée en tôle d'acier à haute résistance à grains fins. Reliée au porteur parune couronne d'orientation à 3 rangées de rouleaux. Rotation totale 360°.
2 leviers à 4 directions avec rappel automatique au point mort. Commande électronique via ledispositif LICCON. Commande des mouvements progressive en continu par variation del'inclinaison des pompes et augmentation du régime moteur.Moteur hydraulique à cylindrée variable, treuil de marque Liebherr avec réducteur planétaire àfrein d'arrêt à lamelles intégrées.1 vérin hydraulique différentiel avec clapet anti-retour de sécurité.Un moteur hydraulique, un réducteur planétaire, un pignon d'orientation et un frein à lamelles.En tôle d'acier galvanisée, peinte par poudrage polyester et cuisson au four, avec vitrage de sécurité,dôtées de tous les éléments de contrôle et de commande, cabine inclinable vers l'arrière de 20°.Contrôleur de charge LICCON, système test, fin de course crochet haut, clapets de sécurité en casde ruptures de flexibles.72,5 t, composé d'une plaque de base de 10 t et 3 plaques de 12,5 t unitaires, 2 blocs latéraux desuspension de 12,5 t.
Flèche télescopique:
Circuit électrique:
Un élément de base et de 5 télescopes. Chaque partie peut être télescopée individuellement àl'aide du système de télescopage séquentiel rapide TELEMATIK.Longueur de flèche: 15,4 m – 72 m.
Technologie de bus de données moderne pour la commande des composants électriques etélectroniques, courant continu 24 Volts, 2 batteries de 170 Ah chacune.
Diesel 4 cylindres, marque Liebherr, type D 924 TI-E, refroidi par eau, puissance DIN 180 kw(245 ch) à 1800 min , couple max. 1080 Nm à 1150 min . Réservoir à carburant: 250 l.-1 -1
Diesel hydraulique à 3 pompes à débit variable servo commandées à régulation de puissance.
Partie tournante.
Equipement optionnel.
Eléments intermédiaires: 2 éléments intermédiaires de 7 m de long pour l'allongement de la fléchette pliante double jusqu'à29 m resp. 36 m.
��
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
37
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
TP 314d.02.03Änderungen vorbehalten. / Subject to modification. / Sous réserve de modifications.
Nehmen Sie Kontakt auf mitPlease contactVeuillez prendre contact avecLIEBHERR-WERK EHINGEN GMBHD-89582 Ehingen/Donau, +49 (0) 73 91 5 02-0, Telefax +49 (0) 73 91 5 02-33 99www.liebherr.com, E-mail: [email protected]
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com