© Bene GmBH, 01/2018
1
T-CADDY
T-CADDYThe T Caddy family captivates with its distin-guished design idiom. They function as personal accessory furniture directly at the workplace and increase storage volume within the user’s imme-diate reach. Or they serve as mobile accessory furniture for team and project work, as well as for non-territorial work.
The top feature functions support a diverse range of uses with their additional storage, seating possibilities and organisation, and they can be customised to the personal requirements of indi-vidual workers or entire teams.
© Bene GmBH, 01/2018
3
1
2
4
5
2
T-CADDYPRODUCT DeSCRIPTIOn
PRODUCT DESCRIPTIONBody19 mm chipboard Consisting of sides, bottom base, top base and, depending on the body type, with middle panel and structur-al floor.
Rear wall:19 mm chipboard 95 mm top projection.
Covered side16 mm chipboard with plastic grip.
Castor seat
Castors:synthetic material 2 braked and 2 unbraked.Optionally available in WI white, Am aluminium or SZ black
Name plate:each T-Caddy is delivered with a plastic nametag that can be positioned freely.The nametag is 106mm wide and 71mm high.
1
2
3
4
5
CARCASS TYPESSmall Medium Large
NICHE LABELSSmall Medium Large
1.1
2.1
1.2
2.2
1.1
2.1
1.1 1.2
© Bene GmBH, 01/2018
3
T-CADDYOPTIOnS
Caddy large and Caddy small can be selected with a roller shutter front. This is made of recycled polypropylene and a plastic handle section.
OPTIONSCARCASS OPTIONS
NICHE OPTIONS
Hinged doors19 mm chipboard With inserted handle in aluminium.Internal strap hinges, opening angle 120° or opening angle 110° and dampened.
each niche can be individually fitted. The door hinge is always positioned on the outside of the body. The hinged door can also be connected via two niches to become a continuous hinged door.
With optional lock, this option always applies to the entire front. Lock position is always located on the opposite side of the door hinge.
Drawers19 mm chipboard With inserted handle in aluminium.The drawers are always self-closing, fully-extendable metal drawers, with optional shock absorption.
each niche can be individually fitted. Drawers are either configurable as “1 drawer” in a niche or as “2 drawers” in a niche.If two niches are stacked on top of each other, the structural floor between the two niches is removed.
With optional lock including locking bar for pull-out stop. The option always applies to the entire front. Lock position always on the right.
When installing hinged doors and/or drawers, counterweights must be installed due to the risk of tilting.For more information see chapter “Safety instructions”
© Bene GmBH, 01/2018
4
T-CADDYOPTIOnS
OPTIONS
ACCESSORY TRAY
TOP FEATURES
Top Flap Top Box Top Board Top Seat
With rear pneumatic spring. Can be opened by simply lifting the flap, with the roller shutter front, this is done by means of a magnetic push snap.A lock, consisting of an interchangeable cylinder with two keys (one of which is foldable) is included. Posi-tion is always on the right. Also available without lock.
Top Flap, Top Box and Top Board are made of chipboard and are available for all Caddy types.Top Flap, Top Box, Top Board and Top Seat can be combined with each other.
The Top Board is not affixed and can be removed.
The Top Seat is only available for the Caddy Small. It is made of poly-urethane cold foam and covered by fabric.
The accessory pullout is always affixed to the bottom of the top floor. no drawer may be installed in the niche underneath.Depending on Caddy type, one or two accessory extensions can be attached (left and/or right).
© Bene GmBH, 01/2018
5
T-CADDYORGAnISATIOn eLemenTS
ORGANISATION ELEMENTS
WIDTH DIVIDER
For compartmentalising a drawer.material & colour: Plastic, SZ black
Width: 326 mmHeight: 77 mm
LENGTH DIVIDER
In A5 or A6. In combination with a width divider.material & colour: Plastic, SZ black
A5 - Width: 221 mm Height: 73 mm
A6 - Width: 151 mm Height: 73 mm
TOP FLAP ORGANISATION
The Top Flap can be optionally equipped with the Flap Tray and/or Flap Board.
Flap TrayThe Flap Tray can be used for storing accessories and notebooks. Size according to Caddy type.material & colour: Felt, DG Grey.
Flap BoardThe Flap Board is suitable for use with pins. The size is always the same.material & colour: Felt, DG Grey.
Small + Large:Width: 840 mmDepth: 410mm
medium:Width: 429 mmDepth: 410mm
Width: 388 mmDepth: 350mm
ACCESSORY TRAY
Can be inserted in a drawer.material & colour: Plastic, SZ black
Width: 348 mmDepth: 258mmHeight: 25 mm
CARD INDEX TRAYS A6 HORIZONTAL
Installed in drawer. Two swivel plates included.material & colour: Plastic, PL platinum.
Width: 165 mmDepth: 345mmHeight: 120mm
SWIVEL PLATE, A6 HORIZONTAL
Can be horizontally suspended in the A6 card index tray.material & colour: Plastic, PL platinum.
© Bene GmBH, 01/2018
6
T-CADDYORGAnISATIOn eLemenTS
ORGANISATION ELEMENTS HANGING CRADLE FOR DRAWER
Installable when 1 drawer is selected as the Caddy front.Optionally available with elevation.material & colour: Plastic feet in SZ black, frame in nickel-plated profile steel.
Width: 350 mmDepth: 350mmHeight: 243mm
FILE TRAYS
1 set, installable in all open compartments with appropriate dimen-sions.material & colour: Plastic, SZ black
HANGING FILE BOX
Pull-out hanging file box with removable file frame for hanging files in A4 format. Installed in empty compartment.material & colour: Sheet panel, CR chrome and SZ black.
Width: 345 mmDepth: 340mmHeight: 295mm
Width: 250 mmDepth: 320mmHeight: 320mm
STATIONERY INSERT
For drawers with 6 sloped trays.material & colour: Plastic, SZ black
Width: 327 mmDepth: 346mmHeight: 199mm
STAMP HOLDER
Installed in drawer.material & colour: Steel, SZ black.
Width: 325 mmDepth: 108mmHeight: 45 mm
© Bene GmBH, 01/2018
61
3
35
6
873
392 392
61
3
35
6
873
235 392468
61
3
468
68
9
98
8
35
6
462
392
35
6
98
8
468
10
64
468
873
392 392
98
8
35
63
56
98
8
468
10
64
468873
235 392
98
8
35
63
56
7
T-CADDYDImenSIOnS
DIMENSIONS
SMALL
MEDIUM
LARGE
open with tambour with Top Box
open with Top Box
open with tambour with Top Box
© Bene GmBH, 01/2018
8
T-CADDYDImenSIOnS
DIMENSIONS
INNER WIDTHS1 drawer 2 drawers Hinged door, 1 niche high Hinged door, 2 niches high
Width: 327 mmDepth: 330mmHeight: 315mm
Width: 327 mmDepth: 330mmHeight: 144mm
Width: 392 mmDepth: 422mmHeight: 356 mm
Width: 392 mmDepth: 422mmHeight: 356 mm
Top Box Top Board Top Seat
Width: 462 / 873 mmDepth: 468 mmHeight: 206 mm
Width: 430 mmDepth: 296 mmHeight: 93 mm
Width: 836 mmDepth: 444 mmHeight: 45 mm
© Bene GmBH, 01/2018
9
T-CADDYSAFeTY InSTRUCTIOnS
SAFETY INSTRUCTIONSCOUNTERWEIGHT
To ensure that the Caddys stand securely, iron counterweights are installed depending on the dimensions of the body and front. Dimensions: Width 388 mm, depth 25 mm, height 60 mm. The weight is approximately 4,5 kg per counterweight.All the combinations that are not listed to do not require any counterweights.
Small Installation location Number of counterweights1 x 1 drawer 11 x 1 drawer and 1 x 2 drawers 21 x 1 drawer and 1 hinged door 12 x 1 drawer 4
Medium Installation location Number of counterweights1 x 1 drawer; 1 hinged door 1
Large Installation location Number of counterweights2 x 1 adjacent drawer 2
3 x 1 drawer 2
4 x 1 drawer 2
Given the weight, only niches with “1 drawer” are provided for the Caddy Large. The other niches can be configured as desired.
© Bene GmBH, 01/2018
10
T-CADDY
INSPIRATIONS
Inspiration #02
T-Caddy medium with hinged door and two drawers
Inspiration #01
T-Caddy small with hinged door and two drawers
© Bene GmBH, 01/2018
11
T-CADDY
INSPIRATIONS
Inspiration #03
T-Caddy large with two hinged doors
© Bene GmBH, 01/2018
12
T-CADDY
COLOURS & MATERIALSMELAMINE: Basic colours MELAMINE: Additional basic colours 1
mW white mQ office white mP platinum mC canvas Tm clay
mS slate mB basaltmA aluminium mT anthracite
AR maple 1 BH beech light1eI oak 1 nG walnut grey
MELAMINE: Decor colours
MELAMINE: Decor, wooden texture1
CO coco textureCe elm white
MELAMINE: Accent colours 1
TX mustard
1 not available for compact top!
© Bene GmBH, 01/2018
13
T-CADDY
COLOURS & MATERIALSVENEER: Maple
VENEER: Nut
VENEER: Oak
VENEER: Bamboo
VENEER: Beech
eY oak sylt
nF american walnut
AK canadian maple eR oak amaretto
nB walnut umbranR walnut siena
BG beech grey eV oak vulcano
nA wal. anthracite BJ bamboo
Different fabric collections are available as cover:Urban Plus, Xtreme Plus, Inn, Step, Step melange, Remix, europost, Field, Clara, Divina, Steelcut, Stamskin Top, Hallingdal, Steelcut Trio, Divina melange, Divina mD, Greenwich, Greenwich Uni.more information about the specific fabric collections is available at www.bene.com.
FABRIC
mW white mB basaltmA aluminiummC canvas
PLASTIC