Download - Systhex Catalog of Products - 2015 - English
CATALOGof
PRODUCTS
®
dental implants
New Factory
04 Systhex
06 Surface
09 Cone Morse - Attract
22 Cone Morse - Cone Fix
43 External Hex with Internal Torque
27 Internal Hex
49 External Hex for Use with Mount
65 Short Implant External Hex
54 External Hex Prosthetic Sequence
68 Short EH Prosthetic Sequence
79 Dental Implant / Bone Graft
83 Surgical Instruments / Kits
100 Instructions for Use
102 Surgical Protocol
104 Bar Clip
12 Prosthetic Sequence CM
32 Internal Hex Prosthetic Sequence
0303
Founded in 2003 and headquartered in Curitiba, PR, Systhex is a genuinely Brazilian company that was created to provide professionals of the fields of implant dentistry and dental prosthetics with modern products with the best cost-efficiency.
This catalogue contains information on our manufactured products and their technical specifications. Product highlights include dental implants, prosthetic components and surgical instruments/kits.
Vision:-
Mission Statememt: -
To be the company that best understands and meets the needs of dental surgeons, prosthodontists and prosthetic dentists, so they can solve the cases of their patients successfully.
To be the brand of choice of professionals.
Values: - Reliability, Respect, Belief, Humility, Integrity and Commitment.
04
05
CERTIFICATIONS:
- RDC 59/2000
ANVISA
Good practices for medical product
manufacturing;
- EN ISO 13485:2003
Healthcare products;
Quality management system; Requirements
for regulation purposes;
- ISO 9001:2008
Quality management system;
- CE 0120
Certification of product conformity with
standards of the European Community.
Quality Policy:
Systhex seeks to consolidate the company as a benchmark of product quality
and processes in order to build a brand of excellence that is recognized and
approved by its public.
The Systhex Quality Policy establishes guidelines to monitor and promote
continuous improvements for business development. By applying this policy,
we aim to exceed the expectations of our clients.
Consequently, Systhex has a commitment with:
- Compliance with laws applicable to the organization of its products, services,
agreements and precepts voluntarily established by the company;
- Adoption of principles that are based on proactivity, efficiency, flexibility and
innovation;
- Compliance with strict quality controls that target problem prevention;
- A permanent quest for perfection of all activities;
- Adoption of better principles to meet assumed commitments;
- Promotion of relationships by means of its business behaviour based on
dialogue, ethics and transparency.
GOOD MANUFACTURING PRACTICES
GOOD PRACTICES DISTRIBUITION
06
Oxytite R Surface
The Oxytite® surface was designed to accelerate cell interactions with the implant surface and make the bone integration process quicker and more efficient. It consists sprays followed by an group of acids.
Ideal porosity adhesion of cells.
Preserved edges.Excellent finish.
07Oxytite Surface
08
09
Implants and Prosthetic Sequence
Cone Morse
10
11
A Switch Platform
- Mini conical abutment sterilized by gamma radiation.
12 Mini Conical Abutment
Straight Mini
Conical Abutment
Open
Impression Transfer Closed
Embedded Screw
Impression Transfer
Protective Cylinder
Embedded Screw
Castable UCLA Castable UCLA Castable UCLATitanium UCLA
Analogue Analogue
Angled Mini Conical
Abutment 17º
Angled Mini Conical
Abutment 27º
Tita
niu
m B
ase
13
Mini Conical AbutmentCONE MORSE INDEXING
CMI
Diameter (mm) Code
Diameter (mm) Code 3.5/4.3/5.0 height 1.5 826.700
3.5/4.3/5.0 height 2.5 826.701
3.5/4.3/5.0 height 3.5 826.702
3.5/4.3/5.0 height 4.5 826.703
3.5/4.3/5.0 height 5.0 826.704
Diameter (mm) Code
3.5/4.3/5.0 height 2.5 827.700
3.5/4.3/5.0 height 3.5 827.701
3.5/4.3/5.0 height 3.5 828.700
3.5/4.3/5.0 height 4.5 827.702
MINI CONICAL ABUTMENT (MCA)
ANGLED MCA 17º
ANGLED MCA 17º
Diameter (mm) Code
Diameter (mm) Code
EH/IH/CMI 849.001
EH/IH/CMI 850.001
OPEN IMPRESSION TRANSFER MCA
CLOSED IMPRESSION TRANSFER MCA
Diameter (mm) Code
EH/IH/CMI 802.001
EH/IH/CMI 802.002
ANALOGUE MCA
Brass
Stainlesssteel
Diameter (mm) Code
EH/IH/CMI 812.001
PROTECTIVE CYLINDER MCA
UCLA MCA WITH HEX SCREW
Diameter (mm) Code
EH/IH/CMI Castable rotation 861.001
EH/IH/CMI Titanium rotation 861.002
EH/IH/CMI Castable with CrCo base 861.003rotation
EH/IH/CMI Castable with titanium base 861.004rotation
- Conical abutment sterilized by gamma radiation.
Conical Abutment CMI14
Straight Conical Abutment
Tita
niu
m B
ase
Open
Impression Transfer Closed
Embedded Screw
Impression Transfer
impression transfer and closed impression trasnfer;
15
Abutment ConicalCONE MORSE INDEXING
CMI
UCLA MPC WITH HEX SCREW
Diameter (mm) Code
EH/IH/CMI Castable rotation 862.001
Castable CrCo base 862.005EH/IH/CMI rotation with
Castable anti-rotation 862.002EH/IH/CMI
862.006EH/IH/CMI Castable anti-rotation with CrCo base
Titanium rotation 862.003EH/IH/CMI
Castable rotation titanium base 862.007EH/IH/CMI with
Titanium anti-rotation 862.004EH/IH/CMI
Castable anti-rotation titanium base 862.008EH/IH/CMI with
Diameter (mm) Code
EH/IH/CMI Brass rotation 803.001 EH/IH/CMI Brass anti-rotation 803.002
EH/IH/CMI Stainless steel rotation 803.003
EH/IH/CMI Stainless steel anti-rotation 803.004
ANALOGUE CA
PROTECTIVE CYLINDER CA
EH/IH/CMI 853.001
EH/IH/CMI 851.001
EH/IH/CMI 852.001
CLOSED IMPRESSION TRANSFER
ROTATION CA
CONICAL ABUTMENT CA
Custom and Direct AbutmentZ=0,5mm
Abutment DirecthinZ=0,4mm
Custom and Direct AbutmentX=0,0/1,5/2,5/3,5 e 4,5mm
Abutment DirecthinX=0,3/1,5/2,5/3,5 e 4,5mm
Custom and Direct AbutmentY=5,0 e 7,0mm
Abutment DirecthinY=4,5 e 6,0mm
Custom and Direct Abutment 4,5/5,0D=5,0mm
Custom and Direct Abutment 3,5D=4,3mm
Abutment DirecthinD=3,5mm
-Titanium component;
-Cement retained restoration;
-Hex titanium screw included;
-Angled abutment:
. Dodecahedron with 12 fitting positions;
-Abutment sterilized by gamma radiation.
PROSTHETIC SEQUENCE
Abutment Transfer
po
lyace
ta
po
lyace
ta
po
lyace
ta
po
lyace
ta
Abutment Analogue
stain
less
stain
less
Protective Cylinder Abutment
Directhin Abutment
Tit
an
ium
Tit
an
ium
Tit
an
ium
Tit
an
ium
Tit
an
ium
Direct Abutment Angled Abutment 15º Angled Abutment 27º Custom Abutment
Directhin Abutment Analogue
Directhin Abutment Transfer
Directhin Protective Cylinder Abutment
Abutment CMI16
17
Abutment CMI
DIRECT HEIGHT 5 mm
ABUTMENT DIRECT HEIGHT 7 mm
ABUTMENT
COSTUM DIRECTHEIGHT 7 mm
COSTUM ABUTMENTHEIGHT 5 mm
DIRECTHIN ABUTMENT TRANSFER - HEIGHT 4.5 mm
DIRECTHIN PROTECTIVE CYLINDERABUTMENT- HEIGHT 4.5 mm
DIRECTHIN PROTECTIVE CYLINDERABUTMENT- HEIGHT 6.0mm
DIRECTHIN ABUTMENT ANALOGUE - HEIGHT 4.5 mm
DIRECTHIN ABUTMENT TRANSFER - HEIGHT 6.0 mm
DIRECTHIN ABUTMENT ANALOGUE - HEIGHT 6.0 mm
3.5 Stainless
4.3/5.0Stainless 801.703
801.702
CONE MORSE INDEXING
Diameter Code
3.5 Stainless
4.3/5.0 Stainless
Ucla CMI18
Castable Ucla with CRCO base 3,5 e 4,3/5,0 CMIZ = 0,3mmCastable Ucla with CRCO base 3,5 e 4,3/5,0 CMIX = 2,0mmCastable Ucla with CRCO base 3,5 CMID = 4,2mmCastable Ucla with CRCO base 4,3 / 5,0 CMID = 5,0mm
Open Impression TransferClosed Thin Transfer
Impression Closed Transfer
Impression
UclaCONE+ MORSE INDEXING
CMI
UCLA WITH HEX SCREWUCLA WITH HEX SCREW
Diameter (mm) Code
3.5 Castable rotation with CrCo base 859.700
4.3/5.0 Castable rotation with CrCo base 859.702
4.3/5.0 Castable anti-rotation with CrCo base 859.703
3.5 Castable anti-rotation with CrCo base 859.701
19
CLOSED IMPRESSION TRANSFER
CLOSED IMPRESSION THIN TRANSFER
X = 1,2 / Z = 0,2X = 2,0 / Z = 1,0X = 3,0 / Z = 2,0X = 4,0 / Z = 3,0
PROSTHETIC SEQUENCE
Tita
niu
m
Tita
niu
m
Su
rgic
al S
tee
l
O’Ring Driver
O’Ring Capsule withPlaced Ring
Rubber Ring
po
lya
ce
ta
Plastic O’RingSpacer Ring
20 Overdenture O’ring CMI
- Titanium component;
- Screwed directly to the implant;
- Overdenture Restoration;
- Ball Attachment System;
- Overdenture sterilized by gamma radiation.
O’Ring Driver
Rubber Ring
Tit
an
ium
Tit
an
ium
XZ
21
Overdenture O’ringCONE MORSE INDEXING
CMI
Product Code
O’ring torque wrench 807.015
TORQUE WRENCH Diameter (mm) Code
3.5/4.3/5.0 height 3 837.801
3.5/4.3/5.0 height 4 837.802
OVERDENTURE O’RING
Product Code
O’Ring Capsule with placed ring 806.001
Rubber ring - O’Ring capsule replacement 804.001
O’Ring plastic spacer ring 804.002
- Plataforma switch;
22
Diameter(mm) CodeLength(mm)
- Implant without internal thread.
special profile;
2323
Diameter (mm) Code 2.8 height 2.0 811.330 2.8 height 3.0 811.331
HEALING ABUTMENT
A Switch Platform
B Diameter 2.8
C Internal Hex 1.6
D Length 9 / 11 / 13 / 15
- Titanium component;- Cement prosthesis;- Locking through morse taper;- Abutment sterilized by gama radiation.
Abutment Transfer
Cone Fix
po
lyace
tap
oly
ace
ta
Abutment Analogue
Cone Fix
stain
less
Protective Cylinder Abutment Cone Fix
Abutment Cone Fix
Tit
an
ium
PROSTHETIC SEQUENCE
CMI24 Abutment
25
ABUTMENT TRANSFERCONE FIX
ABUTMENT ANALOGUE CONE FIX
PROTECTIVE CYLINDER ABUTMENT ABUTMENT CONE FIX
Abutment
Diameter (mm) Diameter (mm) Diameter (mm) Diameter (mm)Code Code Code Code
CMI
2.8 Stainless 800.070
CONE MORSE INDEXING
2626
27
Implants and Prosthetic Sequence
Internal hexagon
28
-Internal hex;
-Cylindrical implant;
-Double thread;
-Internal connection;
-Oxytite surface;
-Cover screw included;
-Maximum recommended torque 65
N.cm; and 45 N.cm for 3.6. platform
3.5 8.5 818.701
3.5 10 818.702
3.5 11.5 818.703
3.5 13 818.704
3.5 15 818.705
3.75 7 818.706
3.75 8.5 818.707
4.0 13 818.716
3.75 15 818.711
5.0 11.5 818.721
4.0 11.5 818.715
3.75 10 818.708
5.0 7 818.718
4.0 15 818.717
4.0 7 818.712
5.0 13 818.722
3.75 11.5 818.709
5.0 8.5 818.719
4.0 8.5 818.713
5.0 15 818.723
3.75 13 818.710
5.0 10 818.720
4.0 10 818.714
Diameter (mm) Length (mm) Code
29
30
-Internal hex;
-Conical implant;
-Double thread;
-Internal connection;
-Oxytite surface;
-Cover screw included;
-Maximum recommended torque 65 N.cm.
Diameter(mm) Length(mm) Code
31
Angled Mini Conical Abutment 17.
Straight MiniConical Abutment
Mini Conical Abutment IHCR
ANGLED ABUTMENT Analogue
Tita
niu
m
PROSTHETIC SEQUENCE
Analogue
Protective cylinderEmbedded Screw
Sta
inle
ssS
tain
less
Sta
inle
ss
- One platform for all abutments allowing use of a single size for components.- Mini conical abutment sterilized by gama radiation.
32
Tita
niu
m B
ase
Open Impression TransferClosed
TransferImpression
Closed Impression Transfer
33
Diameter (mm) Code 3.6 height 2 825.600
4.3 height 2 825.700
4.3 height 3 825.702
ANGLED MINI CONICAL 17º ABUTMENT
Mini Conical AbutmentINTERNAL HEX
HICRHI
CR
HICR
HICR
IHCR
OPEN IMPRESSION TRANSFER MCA
CLOSED IMPRESSION TRANSFER MCA
UCLA MCA WITH HEX SCREW
Diameter (mm) Code
EH/IH/CMI Castable rotation 861.001
Castable CrCo base 861.003EH/IH/CMI rotation with
Titanium rotation 861.002EH/IH/CMI
Castable rotation with titanium base 861.004EH/IH/CMI
- Conical abutment sterilized by gamma radiation.
Conical Abutment IHCR34
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
Tita
niu
m B
ase
Open Transfer
Impression Closed Transfer
Impression
impression transfer and closed impression transfer;
35
CONICAL ABUTMENT CAOPEN TRAY IMPRESSION TRANSFER ROTATION CA
CLOSED TRAY IMPRESSION TRANSFER ROTATION CA
OPEN TRAY IMPRESSION TRANSFER ANTI ROTATION CA
ANALOGUE CA
UCLA CA WITH HEX SCREW
PROTECTIVE CYLINDER CA
Conical AbutmentINTERNAL HEX
HICRIHCR
UCLA CA WITH HEX SCREW
Diameter (mm) Code
EH/IH/CMI Castable rotation 862.001
Castable CrCo base 862.005EH/IH/CMI rotation with
Castable anti-rotation 862.002EH/IH/CMI
862.006EH/IH/CMI Castable anti-rotation with CrCo base
Titanium rotation 862.003EH/IH/CMI
Castable rotation titanium base 862.007EH/IH/CMI with
Titanium anti-rotation 862.004EH/IH/CMI
Castable anti-rotation titanium base 862.008EH/IH/CMI with
EH/IH/CMI 853.001
- Abutment sterilized by gamma radiation
36 Abutment IHCR
Impression Transfer
Open Tray
37
AbutmentINTERNAL HEX
IHCR
OPEN TRAY IMPRESSION TRANSFER
CLOSED IMPRESSION TRANSFER
ANALOGUE
ANGLED ABUTMENT 30º CUSTOM ABUTMENT
STRAIGHT ABUTMENT
ANGLED ABUTMENT 15º
03Ucla38
Impression Transfer Open Tray
Impression Transfer Closed
Analogue
Titanium UCLACastable UCLA
Analogue
Castable Ucla Castable Ucla
IHCR
Sta
inle
ss
Sta
inle
ss
Sta
inle
ssTit
an
ium
Tit
an
ium
Tita
niu
m B
ase
39
UclaINTERNAL HEX
IHCR
OPEN TRAY IMPRESSION TRANSFER
CLOSED IMPRESSION TRANSFER
Diameter (mm) Code
4.3 Castable anti-rotation 860.010
5.0 Castable anti-rotation 860.014
4.3 Castable anti-rotation with CrCo base 860.012
5.0 Castable anti-rotation with CrCo base 860.016
4.3 Castable anti-rotation with titanium base 860.013
5.0 Castable anti-rotation with titanium base 860.017
4.3 Titanium anti-rotation 860.011
5.0 Titanium anti-rotation 860.015
Diameter (mm) Code
3.6 Castable anti-rotation 858.013
4.3 Castable anti-rotation 858.017
5.0 Castable anti-rotation 858.021
3.6 Castable anti-rotation with CrCo base 858.015
4.3 Castable anti-rotation with CrCo base 858.019
5.0 Castable anti-rotation with CrCo base 858.023
3.6 Castable anti-rotation with titanium base 858.016
4.3 Castable anti-rotation with titanium base 858.020
5.0 Castable anti-rotation with titanium base 858.024
3.6 Titanium anti-rotation 858.014
4.3 Titanium anti-rotation 858.018
5.0 Titanium anti-rotation 858.022
- Overdenture sterilized by gamma radiation.
Overdenture IHCR40
Tit
an
ium
Tit
an
ium
41
OverdentureINTERNAL HEX
IHCR
Product Code
O’Ring Capsule with placed ring 806.001
Rubber ring - O’Ring capsule replacement 804.001
O’Ring plastic spacer ring 804.002
4242
43
Implants Prosthetic Sequence
External Hex
44
- External hex;
- Cylindrical implant;
- Double thread;
- Internal torque;
- Oxytite surface;
- Maximum recommended;
torque 65 N.cm.
3.75 7 817.001
3.75 8.5 817.002
3.75 10 817.003
3.75 11.5 817.004
3.75 13 817.005
3.75 15 817.006
4.0 7 817.007
4.5 11.5 817.016
4.0 13 817.011
5.0 10 817.021
4.5 10 817.015
4.0 8.5 817.008
4.5 15 817.018
4.5 13 817.017
4.0 15 817.012
5.0 11.5 817.022
5.0 15 817.024
4.0 10 817.009
5.0 7 817.019
4.5 7 817.013
5.0 13 817.023
4.0 11.5 817.010
5.0 8.5 817.020
4.5 8.5 817.014
Diameter (mm) Length (mm) Code
Cover screw included
Cover screw not included
45
46
- External hex;
- Conical implant;
- Double thread;
- Internal torque;
- Oxytite surface;
- Maximum recommended;
torque 65 N.cm;
- Dynamic implant easy installation;
- Better cutting power.
3.5 8.5 819.011
3.5 10 819.012
3.5 11.5 819.013
3.5 13 819.014
3.5 15 819.015
4.0 8.5 819.001
4.0 10 819.002
5.0 8.5 819.006
5.0 15 819.010
4.0 11.5 819.003
5.0 10 819.007
4.0 13 819.004
5.0 11.5 819.008
4.0 15 819.005
5.0 13 819.009
Diameter (mm) Length (mm) Code
47
A Platform 4.1 4.1 5.0
B Diameter 3.5 4.0 5.0
E Internal Torque 2.0 2.0 2.5
C Internal Hex 2.7 2.7 3.3
F Hex Height 0.7 0.7 1.0
D Internal Thread M2.0 M2.0 M2.5
G Length 8.5 / 10 / 11.5 / 13 / 15
4248
49
Implants and Prosthetic Sequence
External Hex
50
- External hex;
- Cylindrical implant;
- Double thread;
- Use with mount;
- Oxytite surface;
- Cover screw included;
- Mount not included;
- Maximum recommended torque
45 N.cm.
51
808.001
808.002
808.003
808.004
52
Tra
dit
ion
al
Cla
ssic
- External hex;
- Cylindrical implant;
- Double thread;
- Use with mount;
- Oxytite surface;
- Cover screw not included;
- Mount not included;
- Maximum recommended torque
45 N.cm.
19
53
Tra
dit
ion
al
Cla
ssic
A Platform 4.1 4.1 4.1 5.0
B Diameter 3.3 3.75 4.0 5.0
C Internal Hex 2.7 2.7 2.7 3.3
F Length 0.7/8.5/10/11.5/13/15
D Internal Thread M2.0 M2.0 M2.0 M2.5
E Hex Height 0.7 0.7 0.7 1.0
8.5/1011.5
13/15
- Mini conical abutments sterilized by gamma radiation.
Mini Conical Abutment54 EH
Angled Mini Conical
Abutment 17º
Sta
inle
ss
Sta
inle
ss
Tita
niu
m B
ase
Sta
inle
ss
Open Impression Transfer Closed Impression Transfer Embedded Screw
55
Mini Conical AbutmentEXTERNAL HEX
EH
OPEN IMPRESSION TRANSFER MCA
CLOSED IMPRESSION TRANSFER MCA
Diameter (mm) Code
EH/IH/CMI Castable rotation 861.001
EH/IH/CMI Titanium rotation 861.002
EH/IH/CMI Castable with CrCo base 861.003rotation
EH/IH/CMI Castable with titanium base 861.004rotation
ANALOGUE MCA
3.3 height 3 825.3014.1 height 3 828.001
3.3 height 3 825.300
- Conical abutments sterilized by gamma radiation.
Conical Abutment EH56
Tita
niu
m B
ase
57
Conical AbutmentEXTERNAL HEX
EH
CLOSED TRAY IMPRESSION
TRANSFER ROTATION CA
CLOSED TRAY IMPRESSION
TRANSFER ROTATION CA
UCLA CA WITH HEX SCREW
Diameter (mm) Code
EH/IH/CMI Castable rotation 862.001
Castable CrCo base 862.005EH/IH/CMI rotation with
Castable anti-rotation 862.002EH/IH/CMI
862.006EH/IH/CMI Castable anti-rotation with CrCo base
Titanium rotation 862.003EH/IH/CMI
Titanium anti-rotation 862.004EH/IH/CMI
Castable rotation titanium base 862.007EH/IH/CMI with
Castable anti-rotation titanium base 862.008EH/IH/CMI with
PROTECTIVE CYLINDER CA
OPEN TRAY IMPRESSION
TRANSFER ROTATION CA
23
- Abutment sterilized by gamma radiation.
Abutment EH58
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
59
AbutmentEXTERNAL HEX
EH
CLOSED IMPRESSION TRANSFER
SHORT OPEN TRAY
IMPRESSION TRANSFER
ANGLED ABUTMENT 25º
3.3 height 3 831.002
4.1 height 2 831.004
5.0 height 3 831.008
4.1 height 4 831.006
3.3 height 2 831.001
3.3 height 4 831.003
5.0 height 2 831.007
4.1 height 3 831.005
5.0 height 4 831.009
3.3 height 4 833.002
4.1 height 4 833.004
5.0 height 3 833.006
3.3 height 3 833.001
4.1 height 3 833.003
5.0 height 4 833.007
4.1 height 5 833.005
Ucla EH60
Impression TransferOpen Tray
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
Tita
niu
m B
ase
61
UclaEXTERNAL HEX
EH
Diameter (mm) Code
3.3 Castable rotation 856.001
3.3 Castable rotation with CrCo base 856.005
4.1 Castable rotation 856.009
3.3 Titanium rotation 856.003
3.3 Castable rotation with titanium base 856.007
4.1 Titanium rotation 856.011
3.3 Titanium anti-rotation 856.004
3.3 Castable anti-rotation with titanium base 856.008
4.1 Titanium anti-rotation 856.012
3.3 Castable anti-rotation 856.002
3.3 Castable anti-rotation with CrCo base 856.006
4.1 Castable anti-rotation 856.010
4.1 Castable rotation with CrCo base 856.013
5.0 Castable rotation 856.017
5.0 Castable rotation with CrCo base 856.021
4.1 Castable rotation with titanium base 856.015
5.0 Titanium rotation 856.019
5.0 Castable rotation with titanium base 856.023
4.1 Castable anti-rotation with titanium base 856.016
5.0 Titanium anti-rotation 856.020
5.0 Castable anti-rotation with titanium base 856.024
4.1 Castable anti-rotation with CrCo base 856.014
5.0 Castable anti-rotation 856.018
5.0 Castable anti-rotation with CrCo base 856.022
Diameter (mm) Code
3.3 Castable rotation 857.001
3.3 Castable rotation with CrCo base 857.005
4.1 Castable rotation 857.009
3.3 Titanium rotation 857.003
3.3 Castable rotation with titanium base 857.007
4.1 Titanium rotation 857.011
3.3 Titanium anti-rotation 857.004
3.3 Castable anti-rotation with titanium base 857.008
4.1 Titanium anti-rotation 857.012
3.3 Castable anti-rotation 857.002
3.3 Castable anti-rotation with CrCo base 857.006
4.1 Castable anti-rotation 857.010
4.1 Castable rotation with CrCo base 857.013
5.0 Castable rotation 857.017
5.0 Castable rotation with CrCo base 857.021
4.1 Castable rotation with titanium base 857.015
5.0 Titanium rotation 857.019
5.0 Castable rotation with titanium base 857.023
4.1 Castable anti-rotation with titanium base 857.016
5.0 Titanium anti-rotation 857.020
5.0 Castable anti-rotation with titanium base 857.024
4.1 Castable anti-rotation with CrCo base 857.014
5.0 Castable anti-rotation 857.018
5.0 Castable anti-rotation with CrCo base 857.022
CLOSED IMPRESSION TRANSFER
OPEN TRAY IMPRESSION
OPEN TRAY IMPRESSION
TRANSFER SHORT
- Overtenture sterilized by gamma radiation.
Overdenture EH62
O’Ring Capsule with
Placed Ring
Tit
an
ium
Tit
an
ium
63
OverdentureEXTERNAL HEX
EH
Product Code
O’Ring Capsule with placed ring 806.001
Rubber ring - O’Ring capsule replacement 804.001
O’Ring plastic spacer ring 804.002
6464
65
Implants and Prosthetic Sequence
External Hex
66
- Switch platform;
- External hex;
- Cylindrical implant;
- Double thread;
- Use with mount;
- Oxytite surface;
- Mount not included;
- Maximum recommended torque
45 N.cm.
67
A Switch Platform 3.3 4.1
B Diameter 4.0 5.0
C External hex 2.37 2.7
D Internal Thread M1.8 M2.0
E Hex Height 0.8 0.7
F Length 5.0 / 6.0
- Mini conical abutments sterilized by gamma radiation.
Mini Conical Abutment EHshort68
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
Tita
niu
m B
ase
69
Mini Conical AbutmentEXTERNAL HEX
EHshort
OPEN IMPRESSION TRANSFER MCA
CLOSED IMPRESSION TRANSFER MCA
Diameter (mm) Code
EH/IH/CMI Castable rotation 861.001
Castable CrCo base 861.003EH/IH/CMI rotation with
Titanium rotation 861.002EH/IH/CMI
861.004EH/IH/CMI Castable rotation with base titanium
UCLA MCA WITH HEX SCREW
- Conical abutments sterilized by gamma radiation.
Conical Abutment EHshort70
Straight Conical Abutment
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
Tita
niu
m B
ase
71
Conical AbutmentEXTERNAL HEX
EHshort
CLOSED TRAY IMPRESSION
TRANSFER ROTATION CA
OPEN TRAY IMPRESSION
TRANSFER ROTATION CA
PROTECTIVE CYLINDER CA
UCLA CA WITH HEX SCREW
Diameter (mm) Code
EH/IH/CMI Castable rotation 862.001
Castable CrCo base 862.005EH/IH/CMI rotation with
Castable anti-rotation 862.002EH/IH/CMI
862.006EH/IH/CMI Castable anti-rotation with CrCo base
Titanium rotation 862.003EH/IH/CMI
Titanium anti-rotation 862.004EH/IH/CMI
Castable rotation titanium base 862.007EH/IH/CMI with
Castable anti-rotation titanium base 862.008EH/IH/CMI with
CONICAL ABUTMENT CA
- Abutment sterilized by gamma radiation.
Abutment72EH
short
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
Open Impression Transfer Short
Open Impression Transfer Closed Impression Transfer
73
AbutmentEXTERNAL HEX
EHshort
CLOSED IMPRESSION TRANSFER
UclaEXTERNAL HEX
EHshort74
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
Sta
inle
ss
Tita
niu
m B
ase
Open Impression Transfer Short
Open Impression Transfer Closed Impression Transfer
UclaEXTERNAL HEX
EHshort
75
Diameter (mm) Code
3.3 Castable rotation 863.070
3.3 Castable rotation with CrCo base 863.074
4.1 Castable rotation 863.001
3.3 Titanium rotation 863.072
3.3 Castable rotation with titanium base 863.076
4.1 Titanium rotation 863.003
3.3 Titanium anti-rotation 863.073
3.3 Castable anti-rotation with titanium base 863.077
4.1 Titanium anti-rotation 863.004
3.3 Castable anti-rotation 863.071
3.3 Castable anti-rotation with CrCo base 863.075
4.1 Castable anti-rotation 863.002
4.1 Castable rotation with CrCo base 863.005
4.1 Castable rotation with titanium base 863.007
4.1 Castable anti-rotation with titanium base 863.008
4.1 Castable anti-rotation with CrCo base 863.006
Diameter (mm) Code
3.3 Castable rotation 865.070
3.3 Castable rotation with CrCo base 865.074
4.1 Castable rotation 865.001
3.3 Titanium rotation 865.072
3.3 Castable rotation with titanium base 865.076
4.1 Titanium rotation 865.003
3.3 Titanium anti-rotation 865.073
3.3 Castable anti-rotation with titanium base 865.077
4.1 Titanium anti-rotation 865.004
3.3 Castable anti-rotation 865.071
3.3 Castable anti-rotation with CrCo base 865.075
4.1 Castable anti-rotation 865.002
4.1 Castable rotation with CrCo base 865.005
4.1 Castable rotation with titanium base 865.007
4.1 Castable anti-rotation with titanium base 865.008
4.1 Castable anti-rotation with CrCo base 865.006
CLOSED IMPRESSION TRANSFER
- Overdentures sterilized by gamma radiation.
Overdenture EHshort76
- Titanium component;
- Screwed directly to the implant;
- Overdenture Restoration;
- Ball Attachment System;
- Overdenture is sterilized by gamma radiation.
77
OverdentureEXTERNAL HEX
EHshort
OVERDENTURE O’RING
WITH SOCKET
TORQUE WRENCH
4208
79
Bone Graft
80
81
83
84
Surgical KitSurgical Kit
Surg
ical Kit
85
Description Code
Medium Ratchet connection cmi 3.5/4.3/5.0 mm 814.700
Medium Counter-angle connection in cr 3.6 mm 814.015
Medium Ratchet connection in cr 3.6 mm 814.008
Medium Counter-angle connection ci 4.1 mm 814.013
Mount 3.3 mm 828.100
Medium Ratchet connection in cr 4.3/5.0 mm 814.011
Medium Counter-angle connection ci 5.0 mm 814.014
Medium Ratchet connection ci 5.0 mm 814.005
Medium Counter-angle connection cmi 3.5/4.3/5.0 mm 814.701
Medium Counter-angle connection in cr 4.3/5.0 mm 814.016
Mount 5.0 mm 828.102
Extender drills 845.002
Millimetre probe 845.004
Parallelizer 841.001
Complete surgical kit case 815.001
Complete surgical kit 823.001
Extender ratchet 845.003
Titanium forceps 845.001
Medium Ratchet connection ci 4.1 mm 814.002
Mount 4.1 mm 828.101
Description Code
Spear drill 2.0 mm 805.004
Helical drill 3.15 mm 805.008
Countersink drill 4.1 mm 805.002
Helical drill 2.8 mm 805.006
Helical drill 3.8 mm 805.010
Countersink drill 5.0 mm 805.003
Helical drill 3.0 mm 805.007
Helical drill 4.3 mm 805.011
Countersink drill 3.3 mm 805.001
Helical drill 2.0 mm 805.005
Helical drill 3.3 mm 805.009
Helical drill 4.5 mm 805.012
Pilot drill 3/4 mm 805.014
Drill for conical implant 5.0 mm 805.016
Medium digital driver 0.9 mm hex 807.001
Medium digital driver 1.2 mm hex 807.002
Tuft driver 807.013
Drill for conical implant 4.0 mm 805.015
Pilot drill 2/3 mm 805.013
Surgical torque wrench and prosthetic 846.001
Surgical Instruments Surgical Instruments 86
Tuft driver
Helical drill 2.0 mm
Spear drill 2.0 mm
Helical drill 2.8 mm
Helical drill 3.0 mm
Helical drill 3.15 mm
Helical drill 3.3 mm
Helical drill 3.8 mm
Helical drill 4.3 mm
Helical drill 4.5 mm
Countersink drill 5.0 mm
Countersink drill 4.1 mm
Countersink drill 3.3 mm
Pilot drill 2/3
Pilot drill 3/4
Drill for conical implant 4.0 mm
Drill for conical implant 5.0 mm
Digital hex driver medium 0.9 mm
Digital hex driver medium 1.2 mm
Digital square medium 1.3 mm
Ratchet connection ci 4.1 mm short
Su
rgic
al
stain
less
ste
el 846.010
87
Surg
ical In
str
um
ents
medium
cmi
cmi
Drill extender
Torque wrench for O’ring
Ratchet connection in 3.6 mm short
Ratchet connection in 3.6 mm medium
Ratchet connection in 3.6 mm long
Ratchet connection in 4.3/5.0 mm short
Ratchet connection in mm medium
4.3/5.0
88 Bone Graft & Orthodontic KitBone Graft & Orthodontic Kit
Bone G
raft
&
Ort
hodontic K
it
Bone G
raft
&
Ort
hodontic K
it
89
BONE GRAFT KIT
Description Code
Drill for counter-angle 1.6 mm 805.021
Cross point connection for hand piece 814.017
Drill for counter-angle 1.3 mm 805.019
Guide drill 805.023
Drill for straight piece 1.3 mm 805.020
Cross point connection for counter-angle 814.018
Drill for straight piece 1.1 mm 805.018
Drill for counter-angle 1.1 mm 805.017
Drill for straight piece 1.6 mm 805.022
Bone graft complete kit 823.009
Bone graft and orthodontic case 815.005
Hand driver 807.014
ORTHODONTIC KIT
Description Code
Drill for counter-angle 1.3 mm 805.019
Guide drill 805.023
Orthodontic connection for hand driver 814.019
Orthodontic complete kit 823.010
Drill for straight hand piece 1.3 mm 805.020
Hand driver 807.014
Drill for straight hand piece 1.1 mm 805.018
Drill for counter-angle 1.1 mm 805.017
Bone graft and orthodontic case 815.005
Orthodontic connection for counter-angle 814.020
BONE GRAFT AND ORTHODONTIC KIT
Description Code
Drill for counter-angle 1.6 mm 805.021
Cross point connection for hand piece 814.017
Drill for counter-angle 1.3 mm 805.019
Guide drill 805.023
Drill for straight hand piece 1.3 mm 805.020
Cross point connection for counter-angle 814.018
Drill for straight hand piece 1.1 mm 805.018
Drill for counter-angle 1.1 mm 805.017
Drill for straight hand piece 1.6 mm 805.022
Bone graft and orthodontic case 815.005
Orthodontic connection for hand driver 814.019
Hand driver 807.017
Bone graft and orthodontic kit 823.008
Orthodontic connection for counter-angle 814.020
Intermediate KitIntermediate Kit90
Int
Kit
Inte
rmedia
te S
urg
ical Kit
91
Description Code Spear drill 2.0 mm 805.004
Helical drill 3.15 mm 805.008
Helical drill 2.8 mm 805.006
Parallelizer 841.001
Countersink drill 3.3 mm 805.001
Helical drill 3.0 mm 805.007
Helical drill 2.0 mm 805.005
Helical drill 3.3 mm 805.009
Medium Ratchet connection in cr 3.6 mm 814.008
Medium Ratchet connection in cr 4.3/5.0 mm 814.011
Mount 3.3 mm 828.100
Surgical ratchet 806.100
Intermediate surgical case 815.009
Intermediate surgical kit 815.012
Countersink drill 4.1 mm 805.002
Extender drills 845.002
Extender ratchet 845.003
Medium digital driver 0.9 mm hex 807.001
Medium digital driver 1.2 mm hex 807.002
Medium Ratchet connection ci 4.1 mm 814.002
BONE GRAFT AND ORTHODONTIC KIT
Ratchet connection in 4.3/5.0 mm medium
Drill extender
Countersink drill 3.3 mm
Countersink drill 4.1 mm
Parallelizer
Prosthetic KitProsthetic Kit92
Kit P
rosth
etic
Kit
Pro
sth
etic
93
Description Code
Hex torque wrench 1.2 mm medium 807.008
Torque wrench adaptor for digital driver 880.010
Hex torque wrench 0.9 mm medium 807.006
Square torque wrench 1.3 mm medium 807.010
Hex torque wrench 1.2 mm short 807.007
Square torque wrench 1.3 mm long 807.011
Hex torque wrench 0.9 mm short 807.005
Slot torque wrench medium 807.004
Hex torque wrench 1.2 mm long 807.009
Prosthetic complete kit 823.004
Surgical and prosthetic torque wrench 846.001
Prosthetic case 815.004
Torque wrench mini conical abutment/conical abutment 807.012
Slot torque wrench medium
COMPLETE PROSTHETIC KIT
Sinus Lift KitSinus Lift Kit94
Sin
us L
ift
Kit
95
Elevators Kit Elevators Kit96
97
Membrane elevator 2.0 mm
Membrane elevator 4.2 mm
and
alu
min
ium
and
alu
min
ium
and
alu
min
ium
and
alu
min
ium
and
alu
min
ium
Ele
vato
rs K
it E
levato
rs K
it
ELEVATORS KIT
Expanders Kit Expanders Kit98
99
and
alu
min
ium
and
alu
min
ium
and
alu
min
ium
and
alu
min
ium
and
alu
min
ium
Expanders
Kit
Expanders
Kit
EXPANDERS KIT
100
Inst
ruct
ion
s
101
Inst
ruct
ion
s
102
r r
103
l l
104
Clip 70 816.002
Clip 90 816.003
Bar Clip 816.004
SYSTHEXOSSEOUS IMPLANT SYSTEMS INTEGRATED LTDA
FACTORYRua Procópio Ferreira Martins, 586 - Cajuru
CEP: 82940-190 - Curitiba - PRCNPJ: 05.644.129/0001-56 State Registration: 9034995408
Customer Assistance: 0800-6006905 - www.systhex.com.br
Made in Brazil
Head Technician: Dra. Flávia Nicolau Melhem - CRO-PR 15749
SALES AND ADMINISTRATION OFFICEAlameda Princesa Isabel, 1415 - Bigorrilho
CEP: 80.730-080 - Curitiba - PR
DISTRIBUTION CENTERAlameda Princesa Isabel, 1430 - Bigorrilho
CEP: 80.730-080 - Curitiba - PR
BRANCH VITORIAAlameda Princesa Isabel, 1430 - Bigorrilho
CEP: 80.730-080 - Curitiba - PR