AWWA DUCTILE IRON PIPE – GROOVED COUPLINGS
VICTAULIC
®
IS AN ISO 9001 CERTIFIED COMPANY
® REGISTERED TRADEMARK OF VICTAULIC – © COPYRIGHT 2005 VICTAULIC – PRINTED IN U.S.A. – SKU #WCAS-6APRQE 1654 REV G
23.04
United States • Phone: 1-800-PICK-VIC (1-800-742-5842) • Fax: 610-250-8817 • e-mail: [email protected] • Phone: 905-884-7444 • Fax: 905-884-9774 • e-mail: [email protected] • Phone: 32-9-381-1500 • Fax: 32-9-380-4438 • e-mail: [email protected] • Phone: 44(0)1438741100 • Fax: 44(0)1438313883 • e-mail: [email protected] and South America • Phone: 610-559-3300 • Fax: 610-559-3608 • e-mail: [email protected] • Phone: 86-21-58855151 • Fax: 86-21-58851298 • e-mail: [email protected]
Style 341Vic-Flange
®
Adapter
PRODUCT DESCRIPTION
Style 341 Vic-Flange adapters are designed for direct connection of flanged components into a radius grooved (to AWWA C-606 standards) cast or ductile iron pipe system. Sizes 3 - 12" (80 - 300 mm) are hinged for easy handling with integral tabs which facilitate assembly. Sizes 14 - 24" (350 - 600 mm) are cast in four identical segments which are interconnected as assembly is completed.
Style 341 Vic-Flange adapters provide a rigid joint on rigid radius grooved ductile pipe and allow limited movement on flexible radius grooved ductile iron pipe.
Style 341 Vic-Flange adapters are designed for directly incorporating flanged components with ANSI B16.1 (CL.125) bolt hole patterns into a grooved piping system.
DIMENSIONS
3 - 12" Sizes
14 - 24" Sizes
See Victaulicpublication 10.01
for details.
3 - 12" Sizes
14 - 24" Sizes
Note: Gray area of mating face must be free from gouges, undulations ordeformities of any type for effectivesealing.
B
A
Z
Y WX
Note: Gray area of mating face must befree from gouges, undulations or deformities of any type for effective sealing.
W
Z
YB
AX
Pipe Size Max.Wk.
Press. §PSIkPa
Max.End
Load §Lbs.
N
Assembly Bolts †
DrawBolts #
Dimensions Inches/millimeters Aprx.
Wgt.Ea.Lbs.kg
Nom.Dia.
In./mm
ActualOutside
Dia.In./mm
†No.
Bolts Reqd.
SizeInches
#No. Bolts
Reqd.Size
Inches W X Y Z
3 3.960 250 3100 4
5
/
8
X 3 – – 8.44 7.50 6.00 0.94 5.4
80 100,6 1725 13795 214 191 152 24 2,4
4 4.800 250 4500 8
5
/
8
X 3 – – 9.94 9.00 7.50 0.94 8.2
100 121,9 1725 20025 252 229 191 24 3,7
6 6.900 250 9300 8
3
/
4
X 3
1
/
2
– – 12.00 11.00 9.50 1.00 12.0
150 175,3 1725 41385 305 279 241 25 5,4
8 9.050 250 16000 8
3
/
4
X 3
1
/
2
– – 14.63 13.50 11.75 1.13 17.4
200 229,9 1725 71200 372 343 298 29 7,9
10 11.100 250 23700 12
7
/
8
X 4 – – 17.13 16.00 14.25 1.19 24.6
250 281,9 1725 105465 435 406 362 30 11,2
12 13.200 250 34000 12
7
/
8
X 4 – – 20.13 19.00 17.00 1.25 34.4
300 335,3 1725 151300 511 483 432 32 15,6
14 15.300 200 36700 12 1 X 4
1
/
4
4
5
/
8
X 3
1
/
2
24.63 21.00 18.75 1.50 55.0
350 388,6 1375 163315 626 533 476 38 25,0
16 17.400 150 35600 16 1 X 4
3
/
4
4
5
/
8
X 3
1
/
2
27.25 23.50 21.25 1.88 80.0
400 442,0 1035 158420 692 597 540 48 36,3
18 19.500 150 44700 16 1
1
/
8
X 5
1
/
2
4
3
/
4
X 4
1
/
4
29.13 25.00 22.75 2.25 95.0
450 495,3 1035 198915 740 635 578 57 43,1
20 21.600 150 54900 20 1
1
/
8
X 5
3
/
4
4
3
/
4
X 4
1
/
4
31.63 27.50 25.00 2.38 115.0
500 548,6 1035 244305 803 699 635 61 52,2
24 25.800 150 78400 20 1
1
/
4
X 6
1
/
4
4
3
/
4
X 536.13 32.00 29.50 2.50 150.0
600 655,3 1035 348880 918 813 749 64 68,0
§ Refer to notes on page 3.Style 341 requires sufficient clearance behind groove to permit proper assembly.† Total bolts required are to be supplied by the installer. Bolt sizes are for conventional flange-to-flange connections. Longer bolts are required when Vic-Flange Adapters are used with wafer-type valves.# Supplied with Vic-Flange Adapter.
