STRAIGHT BLADE PLUGS & CONNECTORS
Straight Blade Plugs & Connectors
G-1
Index
Device Rating Page NumberNEMA Configurations G-2Hospital Grade 15 & 20A, 125 & 250V G-3Extra-Hard Use Specification Grade 15 & 20A, 125, 250 & 277V G-4Extra-Hard Use Angled Devices 15 & 20A, 125 & 250V G-5Extra-Hard Use Ground Continuity Monitoring 15 & 20A, 125 & 250V G-6MaxGrip® M3 15 & 20A, 125 & 250V G-7Rubber Housing 15 & 20A, 125 & 250V G-8Watertight 15 & 20A, 125 & 250V G-9Medium-Duty Devices 15 & 20A, 125 & 250V G-10Flanged Inlets & Outlets 15 & 20A, 125 & 250V G-11Miscellaneous Configurations G-12Gator Grip Devices 30, 50 & 60A, 125, 250, 277 & 125/250V,
3øY 120/208V G-13Clamp-Lock™ Devices 15A, 125 & 250V; 20A, 125V G-14Product Specifications & Performance G-15 – G-17
Ready-to-wire and ready-to-perform under adverse plant conditions — our Straight Blade Plug & Connector line is an industrial-strength, on-the-job asset.
Stra
igh
t Bla
de P
lug
s & C
on
necto
rs
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Housing is keyed for fast alignment with
terminal section.
Color-coded terminal screws are positioned on same plane and backed-out for fast installation.
Tapered wire wells guide conductors into captivated,
staked clamping nuts.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity; ground pin is reinforced for added strength and safety.
Double-wipe, firm-grip ground contact and triple-wipe power contacts guarantee a superior connection.
Recessed cord-grip screw reduces screwdriver slippage, improves safety.
PS5266X and PS5269X
Chemical- and impact-resistant nylon housing
features horizontal, easy-grip ribs on back body.
See-through, thermoplastic terminal chamber for clear
view of terminals and wire connections.
Rugged external two-piece cord grip provides uniform pressure for superior retention of conductors.
Internal dust shield keeps terminals free of contaminants.
NEM
A C
on
fig
ura
tion
s
G-2
Str
aig
ht
Bla
de P
lug
s &
Con
nect
ors Straight Blade Plugs & Connectors
NEMA Configurations
Labels and Their Meanings
X, Y, Z Hot Lead
W Neutral Lead
G Grounding Lead
Open SlotsIndicate receptacle configurations (female).
Closed SlotsIndicate plug blade configurations (male).
Blade Configuration
R = Female (receptacle, connector, flanged outlet)
P = Male (plug, flanged inlet)
NEMA Configuration
Line # (refers to voltage) Amperage
5-15R
Straight Blade Plugs & Receptacles
15 Ampere 20 Ampere 30 Ampere 50 Ampere 60 Ampere
Receptacle Plug Receptacle Plug Receptacle Plug Receptacle Plug Receptacle Plug
2 Pole, 2 Wire Non-Grounding 1125V 1-15R 2250V 2-20P2 Pole, 3 Wire Grounding 5125V 5-15R 5-15P 5-20R 5-20P 5-30R 5-30P 5-50P 6250V 6-15R 6-15P 6-20R 6-20P 6-30R 6-30P 6-50R 6-50P 7277VAC 7-15R 7-15P 7-20R 7-20P 7-30P 7-50P3 Pole, 3 Wire Non-Grounding 10125/250V 10-20R 10-20P 10-30R 10-30P 10-50R 10-50P3 Pole, 4 Wire Grounding 14125/250V 14-20R 14-20P 14-30R 14-30P 14-50R 14-50P 14-60P 153ø250V 15-20P 15-30R 15-30P 15-50R 15-50P 15-60R 15-60P4 Pole, 4 Wire Non-Grounding 183øY120/208V 18-20R 18-20P 18-60R 18-60P
G-3
Hosp
ital G
rad
e P
lug
s & C
on
necto
rsStra
igh
t Bla
de P
lug
s & C
on
necto
rs
All devices listed on this page conform to NEMA WD-1 and WD-6.
Straight Blade Plugs & ConnectorsHospital Grade Plugs & Connectors
2 Pole, 3 Wire Grounding 15 & 20A, 125 & 250V
PS5266XHG
1.752"2.791"
1.516" 1.358"
NEMA6-20R
NEMA5-15P
NEMA6-15P
NEMA6-15R
NEMA6-20P
NEMA5-15R
NEMA5-20P
NEMA5-20R
Catalog Number Description
Accessories
EHU15AN 15 & 20A EHU Straight Blade, Right Angle AdapterFC22GL EHU-Strain Relief Grip*FC30GL EHU-Strain Relief Grip*FC40GL EHU-Strain Relief Grip*FC52GL EHU-Strain Relief Grip*
IP20 Suitability
Features – Extra-Hard Use (EHU)
n Unit arrives completely ready-to-wire, cuts installation time significantly.
n Nylon housing provides impact andchemical resistance.
n Rugged two-piece cord grip provides more uniform cord retention.
n Internal dust shield keeps terminals free of contaminants.
n Tri-drive assembly screws are standard onHospital Grade plugs and connectors (angle plugs not included).
n All 3-wire terminals located on the same plane, allows for quick wire termination from any angle.
n Heavy-duty brass alloy blades and contacts, resist heat rise, provide excellent conductivity.
n Cord-grip screws recessed to protect installer against screwdriver head slippage.
*For further information consult the Flexcor® Section K.
1.34"1.21"
1.83"
PS8119
NEMA Catalog Rating Cord Config. Number A. V. Description Diameter No.
Hospital Grade – Extra-Hard Use (EHU)
PS5266XHG 15 125 Plug, Black & Clear .230"-.720" 5-15P • • •PS5266HGAN 15 125 Angle Plug, Black & Clear .320"-.655" 5-15P • • •PS5269XHG 15 125 Connector, Black & Clear .230"-.720" 5-15R • • •PS5366XHG 20 125 Plug, Black & Clear .230"-.720" 5-20P • • •PS5366HGAN 20 125 Angle Plug, Black & Clear .320"-.655" 5-20P • • •PS5369XHG 20 125 Connector, Black & Clear .230"-.720" 5-20R • • •PS5666XHG 15 250 Plug, Black & Clear .230"-.720" 6-15P • • •PS5666HGAN 15 250 Angle Plug, Black & Clear .320"-.655" 6-15P • • •PS5669XHG 15 250 Connector, Black & Clear .230"-.720" 6-15R • • •PS5466XHG 20 250 Plug, Black & Clear .230"-.720" 6-20P • • •PS5466HGAN 20 250 Angle Plug, Black & Clear .320"-.655" 6-20P • • •PS5469XHG 20 250 Connector, Black & Clear .230"-.720" 6-20R • • •Hospital Grade MaxGrip® M3
PS8115 15 125 Plug, Gray .230"-.720" 5-15P • • •PS8119 15 125 Connector, Gray .230"-.720" 5-15R • • •
FSUL UL498 WC596 C22.2 No. 42
3rd Party Compliance
1.34"
1.21"
1.83"
PS8115
.77"
PS5269XHG
2.638"
1.516" 1.358"
1.752"
PS5266HGAN
2.130"
1.350"
1.530"
G-4
Str
aig
ht
Bla
de P
lug
s &
Con
nect
ors
All devices listed on this page conform to NEMA WD-1 and WD-6.
Straight Blade Plugs & ConnectorsExtra-Hard Use (EHU) Specification Grade2 Pole, 3 Wire Grounding 15 & 20A, 125, 250 & 277V
IP20 Suitability
Catalog Number Description
Accessories
EHU15AN 15 & 20A EHU Straight Blade, Right Angle AdapterL15RBC Weatherproof Boot-Connector**L15RBP Weatherproof Boot-Plug**FC22GL EHU-Strain Relief Grip=
FC30GL EHU-Strain Relief Grip=
FC40GL EHU-Strain Relief Grip=
FC52GL EHU-Strain Relief Grip=
Ext
ra-H
ard
Use
(EH
U) Sp
eci
fica
tion
Gra
de
Features – Extra-Hard Use (EHU)
n Unit arrives completely ready-to-wire, cuts installation time significantly.
n Nylon housing provides impact andchemical resistance.
n Rugged two-piece cord grip provides more uniform cord retention.
n Internal dust shield keeps terminals free of contaminants.
n Tri-drive assembly screws are standard on all Specification Grade plugs and connectors.
n All 3-wire terminals located on the same plane, allows for quick wire termination from any angle.
n Heavy-duty brass alloy blades and contacts, resist heat rise, provide excellent conductivity.
n Cord-grip screws recessed to protect installer against screwdriver head slippage.
*PS5866X requires L20303AN right angle adapter.**For further information consult the Turnlok® Section H.=For further information consult the Flexcor® Section K.
NEMA Catalog Rating Cord Config.Number A. V. Description Diameter No.
EHU – Specification Grade
PS5266X 15 125 Plug, Black & White .230"-.720" 5-15P • •PS5266XGRY 15 125 Plug, Black & Gray .230"-.720" 5-15P • •PS5266XBK 15 125 Plug, Black .230"-.720" 5-15P • •CR5266X 15 125 Plug, Corrosion- .230"-.720" 5-15P • •
Resistant, Yellow & WhitePS5269X 15 125 Connector, Black & White .230"-.720" 5-15R • •PS5269XGRY 15 125 Connector, Black & Gray .230"-.720" 5-15R • •PS5269XBK 15 125 Connector, Black .230"-.720" 5-15R • •CR5269X 15 125 Connector, Corrosion- .230"-.720" 5-15R • •
Resistant, Yellow & WhitePS5366X 20 125 Plug, Black & White .230"-.720" 5-20P • • •PS5369X 20 125 Connector, Black & White .230"-.720" 5-20R • • PS5666X 15 250 Plug, Black & White .230"-.720" 6-15P • • •PS5669X 15 250 Connector, Black & White .230"-.720" 6-15R • • •PS5466X 20 250 Plug, Black & White .230"-.720" 6-20P • • •PS5469X 20 250 Connector, Black & White .230"-.720" 6-20R • •PS5766X 15 277 Plug, Black & White .230"-.720" 7-15P • •PS5866X* 20 277 Plug, Black & White .385"-1.150" 7-20P • •
FSUL UL498 WC596 C22.2 No. 42
3rd Party Compliance
PS5269X
1.516" 1.358"
1.752"2.638"
PS5266X
1.516" 1.358"
2.791"1.752"
NEMA7-20P
NEMA7-15P
NEMA6-20R
NEMA5-15P
NEMA6-15P
NEMA6-15R
NEMA6-20P
NEMA5-15R
NEMA5-20P
NEMA5-20R
G-5
Extra
-Ha
rd U
se (E
HU
) An
gle
d D
evice
sStra
igh
t Bla
de P
lug
s & C
on
necto
rs
All devices listed on this page conform to NEMA WD-1 and WD-6.
Straight Blade Plugs & ConnectorsExtra-Hard Use (EHU) Angled Devices
2 Pole, 3 Wire Grounding 15 & 20A, 125 & 250V
NEMA6-15P
NEMA6-20P
NEMA5-15P
NEMA5-20P
Catalog Number Description
Accessories
EHU15AN 15 & 20A EHU Straight Blade, Right Angle Adapter
IP20 Suitability
Features – Extra-Hard Use (EHU)
n Angle plugs and adapters both allow for 4-position face rotation.
n Tri-drive assembly and cord-grip screws are standard on all angle adapters.
n Angle adapter (sold separately as catalog number EHU15AN) will accommodate all Pass & Seymour EHU-style Straight Blade plugs and connectors on a retrofit basis. Simply remove the straight handle body from the plug or connector face assembly, and replace with the angle adapter.
EHU15AN
2.97"
1.94"
1.37"
NEMACatalog Rating Cord Config.Number A. V. Description Diameter No.
EHU – Hospital Grade
PS5266HGAN 15 125 Plug, Black & Clear .320"-.655" 5-15P • • •PS5366HGAN 20 125 Plug, Black & Clear .320"-.655" 5-20P • • •PS5666HGAN 15 250 Plug, Black & Clear .320"-.655" 6-15P • • •PS5466HGAN 20 250 Plug, Black & Clear .320"-.655" 6-20P • • •EHU – Specification Grade
PS5266SSAN 15 125 Plug, Black & White .320"-.655" 5-15P • • •PS5366SSAN 20 125 Plug, Black & White .320"-.655" 5-20P • • •PS5666SSAN 15 250 Plug, Black & White .320"-.655" 6-15P • • •PS5466SSAN 20 250 Plug, Black & White .320"-.655" 6-20P • • •
3rd Party Compliance
FSUL UL498 WC596 C22.2 No. 42
PS5266HGAN
PS5266SSAN
2.130"
1.350"
1.530"
2.130"
1.350"
1.530"
G-6
Gro
un
d C
on
tin
uity M
on
itori
ng
Str
aig
ht
Bla
de P
lug
s &
Con
nect
ors
All devices listed on this page conform to NEMA WD-1 and WD-6.
Straight Blade Plugs & ConnectorsExtra-Hard Use Ground Continuity Monitoring (GCM) Plugs & Connectors2 Pole, 3 Wire Grounding 15 & 20A, 125 & 250V
Features – Extra-Hard Use (EHU) Straight Blade GCM
n Integral indication of ground continuity and power status. Continuous monitoring enhances personnel safety and adds convenience.
n Dual, bright LED indicators with 360° visibility. Green LEDs indicate proper ground continuity and power status. Red LEDs indicate ground continuity loss or reversed polarity. No LED indicates open hot, open neutral, or hot to ground cross. For 250V configurations: Hot to ground cross will be indicated by a green and red LED.
n Chemical- and impact-resistant nylon housing features horizontal, easy-grip ribs on back body.
n Exclusive two-piece cord grip accepts a wide range of cord widths. Provides more consistent pressure for superior conductor retention.
n Internal dust shield keeps terminals free of contaminants.
n Recessed cord-grip screw reduces screwdriver slippage, improves safety. Quick-thread tri-drive assembly and cord-grip screws come backed-out and ready-to-wire.
n Color-coded terminal screws are positioned on the same plane and backed-out for fast installation.
n Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
NEMACatalog Rating Cord Config.Number A. V. Description Diameter No.
EHU – GCM
PS5266XGCM 15 125 Plug, Black & White .230"-.720" 5-15P • •PS5266XGCMAN 15 125 Angled Plug, Black & White .320"-.655" 5-15P • •PS5269XGCM 15 125 Connector, Black & White .230"-.720" 5-15R • •PS5366XGCM 20 125 Plug, Black & White .230"-.720" 5-20P • •PS5366XGCMAN 20 125 Angled Plug, Black & White .320"-.655" 5-20P • •PS5369XGCM 20 125 Connector, Black & White .230"-.720" 5-20R • •PS5666XGCM 15 250 Plug, Black & White .230"-.720" 6-15P • •PS5666XGCMAN 15 250 Angled Plug, Black & White .320"-.655" 6-15P • •PS5669XGCM 15 250 Connector, Black & White .230"-.720" 6-15R • •PS5466XGCM 20 250 Plug, Black & White .230"-.720" 6-20P • •PS5466XGCMAN 20 250 Angled Plug, Black & White .320"-.655" 6-20P • •PS5469XGCM 20 250 Connector, Black & White .230"-.720" 6-20R • •
FSUL cULus WC596
3rd Party Compliance
PS5266XGCM
1.516" 1.358"
1.752"2.791"
PS5269XGCM
1.516" 1.358"
1.752"2.638"
250V products will show red and green when hot and ground are reversed.
No LED
Plug – Power loss, open hot or neutral conductor, or hot/ground reversal.
Connector – Assuming power is present at the outlet, there’s an open hot or open neutral conductor in the cordset, or a hot/ground reversal.
Red LED
Plug – Power’s present, but there’s a ground continuity fault or miswire between the receptacle and the panel.
Connector – Power’s present, but there’s a ground continuity fault or mis wire in the cordset (or, if there’s a red indication in the plug as well, between the receptacle and the panel). It’s also possible there could be a problem in both.
Green LED
Plug – There’s proper ground continuity from the panel to the outlet and power’s present.Connector – Power’s present and there’s proper ground continuity through out the cordset and back to the panel.
NEMA6-20R
NEMA5-15P
NEMA6-15P
NEMA6-15R
NEMA6-20P
NEMA5-15R
NEMA5-20P
NEMA5-20R
NEMACatalog Rating Cord Config.Number A. V. Description Diameter No.
Hospital Grade MaxGrip® M3
PS8115 15 125 Hospital Grade Plug, Gray .230"-.720" 5-15P • • PS8119 15 125 Hospital Grade Connector,
Gray .230"-.720" 5-15R • • MaxGrip M3
PS5965Y 15 125 Plug, Yellow .230"-.720" 5-15P • PS5965GRY 15 125 Plug, Gray .230"-.720" 5-15P • PS5965O 15 125 Plug, Orange .230"-.720" 5-15P • PS5969Y 15 125 Connector, Yellow .230"-.720" 5-15R • PS5969GRY 15 125 Connector, Gray .230"-.720" 5-15R • PS5969O 15 125 Connector, Orange .230"-.720" 5-15R • PS5364Y 20 125 Plug, Yellow .230"-.720" 5-20P • • PS5364GRY 20 125 Plug, Gray .230"-.720" 5-20P • • PS5369Y 20 125 Connector, Yellow .230"-.720" 5-20R • • PS5369GRY 20 125 Connector, Gray .230"-.720" 5-20R • • PS5666Y 15 250 Plug, Yellow .230"-.720" 6-15P • • PS5669Y 15 250 Connector, Yellow .230"-.720" 6-15R • • PS5464Y 20 250 Plug, Yellow .230"-.720" 6-20P • • PS5469Y 20 250 Connector, Yellow .230"-.720" 6-20R • •
3rd Party Compliance
FSUL cULus WC596
G-7
Ma
xG
rip® M
3Stra
igh
t Bla
de P
lug
s & C
on
necto
rs
All devices listed on this page conform to NEMA WD-1 and WD-6.
PS5965Y
.77"
1.83"
1.34" 1.21"
PS5969Y
1.83"
1.21"1.34"
PS5965O
1.83"
1.21"1.34"
.77"
PS5969O
1.34"
1.83"
1.21"
Straight Blade Plugs & ConnectorsMaxGrip® M3
2 Pole, 3 Wire Grounding 15 & 20A, 125 & 250V
High-visibility yellow and orange, or gray.
Hospital Grade version displays the Hospital Grade green dot.
Enclosed terminals provide solid, internally-clamped connections.
Molded finger grips promote safe, sure handing.
PS5965Y and PS5969Y
Self-hinge swings wide open to make quick, easy work of tight, clean connections. Insert conductors into terminals and tighten terminal screws; close hinge housing around cord and tighten housing screws.
Tough nylon construction with crush/impact resistance that exceeds hospital grade and Fed Spec requirements; arc resistance exceeds UL requirements.
NEMA6-20R
NEMA5-15P
NEMA6-15P
NEMA6-15R
NEMA6-20P
NEMA5-15R
NEMA5-20P
NEMA5-20R
A
1447
CD
B
1547
A
CE
D
B
(Inch) A B C D ERubber Straight Blade Plug15A 2.27" 1.44" 1.53" 1.53"20A 2.59" 1.76" 1.93" 1.60"Rubber Straight Blade Connector15A 2.99" 2.16" 1.53" 1.66" 1.53"20A 3.74" 2.19" 1.93" 2.07" 1.60"Cord Grip Range: .335"-.640"
G-8
Str
aig
ht
Bla
de P
lug
s &
Con
nect
ors
All devices listed on this page conform to NEMA WD-1 and WD-6.
Rub
ber
Housi
ng
Straight Blade Plugs & ConnectorsRubber Housing2 Pole, 3 Wire Grounding 15 & 20A, 125 & 250V
UL498 C22.2 No. 42M
3rd Party Compliance NEMA Catalog Rating Config.Number A. V. Description No.
Rubber Housing Plugs & Connectors
1447 15 125 Plug, Yellow 5-15P • •1547 15 125 Connector, Yellow 5-15R • •1433P 20 125 Plug, Yellow 5-20P • •1533 20 125 Connector, Yellow 5-20R • •1449 15 250 Plug, Yellow 6-15P • •1549 15 250 Connector, Yellow 6-15R • •1448 20 250 Plug, Yellow 6-20P • •1548 20 250 Connector, Yellow 6-20R • •
Nickel-plated blades and contacts for long-lasting, superior corrosion resistance.
Terminal screws backed-out, ready- to-wire, saving time and money.
Floating blades allow self-alignment with contacts for a firm, even electrical connection.
Self-centering cord clamps provide superior strain relief.
Quick-drive assembly screws allow for fast installation, saving time and money.
Rubber body construction stands up to impacts, oils, chemicals, heat, and weather.
1447 and 1547
NEMA6-20R
NEMA5-15P
NEMA6-15P
NEMA6-15R
NEMA6-20P
NEMA5-15R
NEMA5-20P
NEMA5-20R
15W47
A
B
Straight Blade Plugs & ConnectorsWatertight
2 Pole, 3 Wire Grounding 15 & 20A, 125 & 250V
G-9
Wa
tertig
ht
All devices listed on this page conform to NEMA WD-1 and WD-6.
IP67Suitability
(Inch) A BWatertight Plug15A 2.62" 1.85"20A 2.62" 1.85"Watertight Connector15A 4.03" 1.85"20A 4.03" 1.85"Cord Grip Range: .062"-.625"
Stra
igh
t Bla
de P
lug
s & C
on
necto
rs
UL498 C22.2 No. 42M
3rd Party Compliance NEMACatalog Rating Config.Number A. V. Description No.
Rubber Housing Plugs & Connectors – Watertight
14W47 15 125 Plug, Yellow, NEMA 4X 5-15P • •15W47 15 125 Connector, Yellow, NEMA 4X 5-15R • •14W33 20 125 Plug, Yellow, NEMA 4X 5-20P • •15W33 20 125 Connector, Yellow, NEMA 4X 5-20R • •14W49 15 250 Plug, Yellow, NEMA 4X 6-15P • •15W49 15 250 Connector, Yellow, NEMA 4X 6-15R • •14W48 20 250 Plug, Yellow, NEMA 4X 6-20P • •15W48 20 250 Connector, Yellow, NEMA 4X 6-20R • •
Floating blades allow self-alignment with contacts for a firm, even electrical connection.
Nickel-plated blades and contacts for long-lasting, superior corrosion resistance.
Terminal screws backed-out, ready-to-wire, saving time and money.
Compression-type cord grip provides watertight seal and 205 lb. pull out strength.
Rubber body construction stands up to impacts, oils, chemicals, heat, and weather.
Multiple ring seals between plug and connector ensures protection from water and contaminants.
NEMA 4, 4X, Watertight. IP65, 66, 67. Rated watertight for 1,000 psi high-pressure hose-down.
Quick-drive assembly screws allow for fast installation, saving time and money. 15W47 and 14W47
NEMA6-15P
NEMA6-20P
NEMA5-15P
NEMA5-20P
NEMA6-15R
NEMA6-20R
NEMA5-15R
NEMA5-20R
3rd Party Compliance
UL498 C22.2 42M
NEMACatalog Config.Number Description No.
Caps – Watertight Only
14WPS Male Cap All • •50W50PS Female Replacement Cap All • •
14WPS
50W50PS
B
14W47
A
14W47 shown with 14WPS cap. Cap sold separately.
Med
ium
-Duty
Devic
es
G-10
Str
aig
ht
Bla
de P
lug
s &
Con
nect
ors
All devices listed on this page conform to NEMA WD-1 and WD-6.
Straight Blade Plugs & ConnectorsMedium-Duty Devices2 Pole, 3 Wire Grounding 15 & 20A, 125 & 250V
IP20 Suitability
5276BK
1.640"
.843" Max
1.530"Dia.
1.840"
Features
n All nylon construction, provides excellent impact and chemical resistance.
n Simple turn and twist assembly for quick installation.
n Ready-to-wire from factory, saves time and money.
n All black, perfect for stage and entertainment applications.
n Internal finger grips automatically adjust to securely grip the cord jacket.
5296BK
2.140"2.340"
1.530"Dia.
NEMACatalog Rating Cord Config.Number A. V. Description Diameter No.
Dead Front Plugs & Connectors5276BK 15 125 Plug, Black .230"-.655" 5-15P • •5296BK 15 125 Connector, Black .230"-.655" 5-15R • •5765BK 20 125 Plug, Black .230"-.655" 5-20P • •5374BK 20 125 Connector, Black .230"-.655" 5-20R •5666BK 15 250 Plug, Black .230"-.655" 6-15P • •5669BK 15 250 Connector, Black .230"-.655" 6-15R • •5864BK 20 250 Plug, Black .230"-.655" 6-20P • •5866BK 20 250 Connector, Black .230"-.655" 6-20R • •
3rd Party Compliance
FSUL UL498 WC596
NEMACatalog Rating Cord Config.Number A. V. Description Diameter No.
Medium-Duty Plugs & Connectors4867Y 15 125 Plug, Yellow .250-.600" 5-15P •4887Y 15 125 Connector, Yellow .250-.600" 5-15R •
3rd Party Compliance
cULus
4867Y
2.500"1.688"
1.563"
Features
n All nylon construction.n Termination saddle clamps securely capture
stranded wires.n All yellow, perfect for high-visibility cords.
n External cord grips are one-size-fits-all, no inserts or flipping the clamps to fit the proper cord OD.
NEMA6-20R
NEMA5-15P
NEMA6-15P
NEMA6-15R
NEMA6-20P
NEMA5-15R
NEMA5-20P
NEMA5-20R
G-11
Fla
ng
ed
Inle
ts & O
utle
tsStra
igh
t Bla
de P
lug
s & C
on
necto
rs
Catalog Number Description
Weatherproof Cover for Flanged Devices
WPG1 Weatherproof Cover for Flanged Inlets and Outlets
For further information consult the Weatherproof Section P.
5278SS
2.0"
.156"
2.562"
1.655"
1.725"
5279SS
2.0"
.156"
2.562"
1.374"
1.660".143"
Features
n All thermoplastic construction, provides excellent impact and chemical resistance.
n Available in Gray or Black.
n NEMA configuration molded on flange, easy field identification.
Features
n Glass-filled polycarbonate, impact- and corrosion-resistant.
n Stainless steel hardware.
n Molded-in flat surface label area.n OSHA lock-out/tag-out provision molded-in.n Accepts competitor inlets and outlets.
IP20 Suitability
Straight Blade Plugs & ConnectorsFlanged Inlets & Outlets
2 Pole, 3 Wire Grounding 15 & 20A, 125 & 250V
WPG1
4.57"
3.25"
.19" (4 HOLES)
2.85"1.88"
3.57"
3rd Party Compliance
FSUL UL498 WC596
NEMACatalog Rating Config.Number A. V. Description No.
Flanged Inlets & Outlets – Black5278SSBK 15 125 Inlet, Black 5-15P • •5279SSBK 15 125 Outlet, Black 5-15R • •
3rd Party Compliance
FSUL UL498 WC596
NEMACatalog Rating Config.Number A. V. Description No.
Flanged Inlets & Outlets – Gray5278SS 15 125 Inlet, Gray 5-15P • •5279SS 15 125 Outlet, Gray 5-15R • •5378SS 20 125 Inlet, Gray 5-20P • •5379SS 20 125 Outlet, Gray 5-20R • •5678SS 15 250 Inlet, Gray 6-15P • •5679SS 15 250 Outlet, Gray 6-15R • •5478SS 20 250 Inlet, Gray 6-20P • •5479SS 20 250 Outlet, Gray 6-20R • •
All devices listed on this page conform to NEMA WD-1 and WD-6.
NEMA6-20R
NEMA5-15P
NEMA6-15P
NEMA6-15R
NEMA6-20P
NEMA5-15R
NEMA5-20P
NEMA5-20R
Mis
cella
neous
Con
fig
ura
tion
s
G-12
Str
aig
ht
Bla
de P
lug
s &
Con
nect
ors Straight Blade Plugs & Connectors
Miscellaneous Configurations
All devices listed on this page conform to NEMA WD-1 and WD-6.
IP20 Suitability
3861
2.77"1.388"
1.36"
3.3"
1.22"
3869
2.86"
1.40"
3.43"
7088
1.859"
.676"
1.953"
NEMA6-30P
NEMA5-30P
NEMA6-50P
NEMA10-50P
NEMA10-30P
NEMA10-20P
NEMA10-20R
NEMA14-30P
NEMA15-30P
NEMA5-50P
NEMA14-50P
NEMA14-60P
NEMA15-50P
NEMA15-60P
NEMA18-20P
NEMA18-60P
38672.77"
1.388"1.36"
3.43"
1.22"
7251DF
.875"Max.
.687" Min.
1.77"
2.03"
8302AN
1.22"
1.362"2.12"
2.62"3.43"
NEMACatalog Rating Cord Config.
Number A. V. Description Diameter No.
2 Pole, 3 Wire Grounding43379 30 125 Angled Plug, Yellow 5-30P43399 50 125 Angled Plug, Yellow 5-50P3869 30/50 250 Angled Plug, Black .56"-1.1" 6-30P/6-50P •3 Pole, 3 Wire Non-Grounding3861 30/50 125/250 Angled Plug, Black .56"-1.1" 10-30P/10-50P •9977 20 125/250 Plug, Nylon 10-20P •7088 20 125/250 Connector, Armored 10-20R
3 Pole, 4 Wire Grounding5746AN 30 125/250 Angled Plug, Yellow 14-30P •5741AN 30 3ø, 250 Angled Plug, Yellow 15-30P • •5745AN 50 125/250 Angled Plug, Yellow 14-50P •14629 60 125/250 Angled Plug, Yellow 14-60P5751AN 50 3ø, 250 Angled Plug, Yellow 15-50P • •5761AN 60 3ø, 250 Angled Plug, Yellow 15-60P • •3867 30/50 125/250 Angled Plug, Black .56"-1.1" 14-30P/14-50P • •4 Pole, 4 Wire Non-Grounding7251DF 20 3øY, Plug, Yellow .365"-.775" 18-20P • • 120/2088302AN 60 3øY, Angled Plug, Yellow 18-60P • 120/208
3rd Party Compliance
FSUL UL498 WC596 C22.2 No. 42
5741AN
1.22"2.12"
2.62"
3.43"
1.388"
9977
1.781"
.531"
2.063"
2.156"
G-13
Ga
tor G
rip D
evice
sStra
igh
t Bla
de P
lug
s & C
on
necto
rs
All devices listed on this page conform to NEMA WD-1 and WD-6.
Straight Blade Plugs & ConnectorsGator Grip Devices
Features – Gator Grip Devices
n Gator Grip Jaws grab cord tighter as you hand turn the housing.
n Nylon jaws grip securely, but won’t damage insulation.
n Self-locking Dardelet Thread holds securely and assures firm clamping.
n Fast wiring — simply insert stranded conductors into individual wiring chambers and tighten oversized terminal screws.
n Transparent wiring chamber cover allows visual inspection of wiring chambers to assure proper connections.
n Sloped shoulders won’t catch or snap.n Automatic cord centering.n Brilliant high-visibility yellow.n Neoprene Dust Seal helps keep out dirt & debris.n Dead front construction.
NEMA10-50P
NEMA10-30P
NEMA6-30P
NEMA6-50P
NEMA5-30P
NEMA5-50P
NEMA6-30R
NEMA6-50R
NEMA7-50P
NEMA7-30P
NEMA5-30R
NEMA5-50R
NEMA10-50R
NEMA10-30R
NEMA14-30P
NEMA14-50P
NEMA18-60P
D0531
1.85" 1.72"
2.63"
D0651
1.85" 1.72"
2.63"
D0653
1.85" 1.72"
2.22"
2.63"
NEMA Catalog Rating Cord Config.
Number A. V. Description Diameter No.
2 Pole, 3 Wire Grounding 30 & 50A, 125, 250 & 277V
D0531 30 125 Plug, Yellow .57"-1.26" 5-30P • •D0533 30 125 Connector, Yellow .57"-1.26" 5-30R • •D0551 50 125 Plug, Yellow .57"-1.26" 5-50P • •D0553 50 125 Connector, Yellow .57"-1.26" 5-50R • •D0631 30 250 Plug, Yellow .57"-1.26" 6-30P • •D0633 30 250 Connector, Yellow .57"-1.26" 6-30RD0651 50 250 Plug, Yellow .57"-1.26" 6-50P • •D0653 50 250 Connector, Yellow .57"-1.26" 6-50R • •D0731 50 277 Plug, Yellow .57"-1.26" 7-30P • •D0751 50 277 Plug, Yellow .57"-1.26" 7-50P • •3 Pole, 3 Wire 30 & 50A, 125/250V
1031 30 125/250 Plug, Yellow .57"-1.26" 10-30P • •1033 30 125/250 Connector, Yellow .57"-1.26" 10-30R1051 50 125/250 Plug, Yellow .57"-1.26" 10-50P • •1053 50 125/250 Connector, Yellow .57"-1.26" 10-50R • •3 Pole, 4 Wire 30 & 50A, 125/250V
1431 30 125/250 Plug, Yellow .57"-1.26" 14-30P • •1451 50 125/250 Plug, Yellow .57"-1.26" 14-50P • •4 Pole, 4 Wire 60A, 3øY 120/208V
D1861 60 3øY 120/208 Plug, Yellow .57"-1.26" 18-60P • •
FSUL UL498 WC596
3rd Party Compliance
D0533
1.85" 1.72"
2.63"
2.22"
1.85"1.72"
2.63"
1431
All devices listed on this page conform to NEMA WD-1 and WD-6.
U-drive combination slot/crosshead screws ensure easy assembly.
Long, deep channels guide conductors and prevent over-insertion.
PS515CCLB
Molded-in guide shows correct wire stripping length.
Solid brass blades and contacts provide excellent conductivity.
Transparent polycarbonate terminal cover makes terminals visible for visual termination verification.
Self-centering cord grip helps speed assembly.
Color-coded levers enable terminal identification at a glance and reduce the
chance of wiring errors.
Removable inserts accom modate the
widest possible range of cable diameters.
Rugged nylon housing and backbody withstand chemicals,
heat, wear and impact.
Speedy, patented cam-lever termination provides solid,
dependable connections.
G-14
Straight Blade Plugs & ConnectorsClamp-Lock™ Devices2 Pole, 3 Wire Grounding 15A, 125 & 250V; 20A, 125V
Cla
mp
-Lock
™ D
evic
es
Str
aig
ht
Bla
de P
lug
s &
Con
nect
ors
NEMACatalog Rating Cord Config.Number A. V. Description Diameter No.
P&S Clamp-Lock™ Straight Blade Plugs & Connectors
PS515PCLB 15 125 Plug, Black & White .20"-.470" 5-15P • •PS515CCLB 15 125 Connector, Black & White .20"-.470" 5-15R • •PS520PCLB 20 125 Plug, Black & White .20"-.470" 5-20P • •PS520CCLB 20 125 Connector, Black & White .20"-.470" 5-20R • •PS615PCLB 15 250 Plug, Black & White .20"-.470" 6-15P • •PS615CCLB 15 250 Connector, Black & White .20"-.470" 6-15R • •
FSUL cULus WC596
3rd Party Compliance
NEMA5-15P
NEMA6-15P
NEMA6-15R
NEMA5-15R
NEMA5-20P
NEMA5-20R
PS515PCLB
1.55" 1.40"
1.85"2.10"
PS515CCLB
1.55"
1.85"2.80"
1.40"
G-15
Stra
igh
t Bla
de P
lug
s & C
on
necto
rsPro
duct S
pecifica
tion
s & P
erfo
rma
nce
Straight Blade Plugs & ConnectorsProduct Specifications & Performance
EHU Ground Continuity Monitoring (GCM) Plugs & Connectors 15 & 20A Straight Blade
Plugs
Back Body NylonFront Body NylonTerminal Chamber PolycarbonateCord Clamp NylonInsert NylonBlades BrassTerminal Clamp Zinc-Plated SteelTerminal Screws Nickel- or Brass-Plated SteelGround Screws Nickel-Plated SteelCord Clamp Screws Nickel-Plated Steel #8Assembly Screws Nickel-Plated Steel
Connectors
Back Body NylonFront Body NylonTerminal Chamber PolycarbonateCord Clamp NylonInsert NylonContacts BrassTerminal Clamp Zinc-Plated SteelTerminal Screws Nickel- or Brass-Plated SteelGround Screws Nickel-Plated SteelCord Clamp Screws Nickel-Plated Steel #8Assembly Screws Nickel-Plated Steel
Performance
ElectricalDielectric Withstand Voltage 1500V minimumMaximum Working Voltage 250VCurrent Interrupting Certified for current interrupting
at full-rated currentTemperature Rise 30°C maximum after 50 cycles
at 150% rated currentMechanicalCord Accommodation Round portable service cords
of diameters in accordance with the device rating as defined in UL62
Cord Grip Accommodation .230"–.720" diameter Terminal Identification Green = Ground,
White = Neutral, Brass = HotTerminal Accommodation #18 AWG min.– #10 AWG max.Product Identification Amperage, Voltage,
3rd Party Compliance, NEMA Configuration
EnvironmentalFlammability UL94 V2Operating Temperature Maximum continuous: +75°C
Minimum: -40°C without impact
EHU & Corrosion-Resistant Plugs & Connectors 15 & 20A Straight Blade
Plugs
Back Body NylonFront Body NylonTerminal Chamber PolycarbonateCord Clamp NylonInsert NylonBlades * BrassTerminal Clamp * Zinc-Plated SteelTerminal Screws Nickel- or Brass-Plated SteelGround Screws Nickel-Plated SteelCord Clamp Screws Nickel-Plated Steel #8Assembly Screws Nickel-Plated Steel
Connectors
Back Body NylonFront Body NylonTerminal Chamber PolycarbonateCord Clamp Nylon Insert NylonContacts * BrassTerminal Clamp * Zinc-Plated SteelTerminal Screws Nickel- or Brass-Plated SteelGround Screws Nickel-Plated SteelCord Clamp Screws Nickel-Plated Steel #8Assembly Screws Nickel-Plated Steel
Performance
ElectricalDielectric Withstand Voltage 1500V minimum Maximum Working Voltage 250VCurrent Interrupting Certified for current interrupting
at full-rated currentTemperature Rise 30°C maximum after 50 cycles
at 150% rated currentMechanicalCord Accommodation Round portable service cords
of diameters in accordance with the device rating as defined in UL62
Cord Grip Accommodation .230"–.720" diameter Terminal Identification Green = Ground,
White = Neutral, Brass = HotTerminal Accommodation #18 AWG min.– #10 AWG max.Product Identification Amperage, Voltage,
3rd Party Compliance, NEMA configuration
EnvironmentalFlammability UL94 V2 Operating Temperature Maximum continuous: +75°C
Minimum: -40°C without impact
* Nickel-Plated for Corrosion-Resistant Product.
G-16
Str
aig
ht
Bla
de P
lug
s &
Con
nect
ors
Pro
duct
Sp
eci
fica
tion
s &
Perf
orm
an
ceStraight Blade Plugs & ConnectorsProduct Specifications & Performance
MaxGrip® M3 Plugs & Connectors
Plug
Part MaterialBody/Housing NylonCord Grip Insert NylonTerminal Clamp BrassTerminal Screws Zinc- or Brass-Plated SteelGround Screws Zinc-Plated Steel Blades BrassCord Clamp Assembly Screws Zinc-Plated Steel
Connector
Part MaterialBody/Housing NylonCord Grip Insert NylonTerminal Clamp BrassTerminal Screws Zinc- or Brass-Plated SteelGround Screws Zinc-Plated SteelContacts BrassCord Clamp Assembly Screws Zinc-Plated Steel
Performance
ElectricalDielectric Withstand Voltage 1500VMaximum Working Voltage 250VCurrent Interrupting Certified for current interrupting
at full-rated currentTemperature Rise 30°C maximum after 50 cycles
at 150% rated current
MechanicalCord Accommodation Round portable service cords
of diameters in accordance with the device rating as defined in UL62
Cord Grip Accommodation .230"–.720" diameter cordTerminal Identification Green = Ground,
Silver = Neutral, Brass = HotTerminal Accommodation #18 AWG min.– #12 AWG max.Product Identification Amperage, Voltage,
3rd Party Compliance, NEMA Configuration
EnvironmentalFlammability UL94 HBOperating Temperature Maximum continuous: +75°C;
Minimum: -40°C without impact
Gator Grip Devices Plugs & Connectors 30, 50 & 60A Straight Blade
Plugs
Back Body Glass-Filled PolypropyleneFront Body Glass-Filled PolypropyleneTerminal Chamber PolycarbonateCord Clamp Glass-Filled NylonInsert NylonBlades BrassTerminal Clamp Zinc-Plated SteelTerminal Screws Tin- or Brass-Plated SteelGround Screws Zinc-Plated SteelCord Clamp Screws N/AAssembly Screws Zinc-Plated Steel
Connectors
Back Body Glass-Filled PolypropyleneFront Body Glass-Filled PolypropyleneTerminal Chamber PolycarbonateCord Clamp Glass-Filled PolypropyleneInsert NylonContacts BrassTerminal Clamp Zinc-Plated SteelTerminal Screws Tin- or Brass-Plated SteelGround Screws Zinc-Plated SteelCord Clamp Screws N/AAssembly Screws Zinc-Plated Steel
Performance
Electrical Dielectric Withstand Voltage 1500V Maximum Working Voltage Up to 277VCurrent Interrupting Certified for current interrupting
at full-rated currentTemperature Rise 30°C maximum after 50 cycles
at 150% rated currentMechanical Cord Accommodation Round portable service cords
of diameters in accordance with the device rating as defined in UL62
Cord Grip Accommodation .570"–1.260" diameter Terminal Identification Green = Ground,
White = Neutral, Brass = HotTerminal Accommodation #10 AWG min.– #4 AWG max.Product Identification Amperage, Voltage,
3rd Party Compliance, NEMA Configuration
EnvironmentalFlammability UL94 V0 Operating Temperature Maximum continuous: +75°C
Minimum: -40°C without impact
G-17
Stra
igh
t Bla
de P
lug
s & C
on
necto
rsStraight Blade Plugs & Connectors
Product Specifications & Performance
Pro
duct S
pecifica
tion
s & P
erfo
rma
nce
*Suitable for 208V motor applications at the HP rating specified.
NEMA Configuration AC HP Rating
Straight Blade Horsepower Rating for NEMA Configuration Attachment Plugs & Receptacles
5-15 1⁄26-15 11⁄2*7-15 25-20 16-20 2*7-20 210-20 2 Line to Line*
1 Line to Neutral
Clamp-Lock™ Plugs & Connectors
Plug
Part MaterialBody/Housing NylonCord Grip Insert NylonTerminal Clamp BrassTerminal Screws Zinc- or Brass-Plated SteelGround Screws Zinc-Plated Steel Blades BrassCord Clamp Assembly Screws Zinc-Plated Steel
Connector
Part MaterialBody/Housing NylonCord Grip Insert NylonTerminal Clamp BrassTerminal Screws Zinc- or Brass-Plated SteelGround Screws Zinc-Plated SteelContacts BrassCord Clamp Assembly Screws Zinc-Plated Steel
Performance
ElectricalDielectric Withstand Voltage 1500VMaximum Working Voltage 250VCurrent Interrupting Certified for current interrupting
at full-rated currentTemperature Rise 30°C maximum after 50 cycles
at 150% rated current
MechanicalCord Accommodation Round portable service cords
of diameters in accordance with the device rating as defined in UL62
Cord Grip Accommodation .20"–.470" diameter cordTerminal Identification Green = Ground,
Silver = Neutral, Brass = HotTerminal Accommodation #18 AWG min.– #12 AWG max.Product Identification Amperage, Voltage,
3rd Party Compliance, NEMA Configuration
EnvironmentalFlammability UL94 HBOperating Temperature Maximum continuous: +75°C;
Minimum: -40°C without impact