SITRAIN Digital
Industry AcademySouth Africa
siemens.com/SITRAIN© Siemens 2019
© Siemens 20XX
11/20/2019Page 2
SITRAIN Digital Industry offers you learning paths, courses
and certified degrees on the following topics:
1 Industrial Automation
Systems SIMATIC
2 Industrial
Communications
3 Operator Control and Monitoring
Systems SIMATIC HMI
4 Digital Enterprise
5 Drive Technology
SINAMICS
6 Motion Control
7 Process Instrumentation
8 Process Control Systems SIMATIC
PCS 7 and SIMATIC PCS neo
© Siemens 20XX
11/20/2019Page 3
Industrial
Automation
Systems
SIMATIC
1
SIMATIC S7-1500, TIA Portal,
SIMATIC S7-300/-400, SIMATIC S7-1200
© Siemens 20XX
11/20/2019Page 4
Trainings for SIMATIC S7-1500 in the TIA Portal
Level 1
Service Training Programming Training Programming Languages
SIMATIC programming 1 in the TIA Portal TIA-PRO1
SIMATIC programming
with S7-Graph in the TIA PortalTIA-GRAPH
SIMATIC programming 1
with S7-SCL in the TIA PortalTIA-SCL1
Level 2
Level 3
SIMATIC programming 2 in the TIA Portal TIA-PRO2
SIMATIC programing 2
with S7-SCL in the TIA PortalTIA-SCL2
Siemens Certified PLC Programmer TIA-PRO3
Certification courses
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMATIC service 1 in the TIA Portal TIA-SERV1
SIMATIC service 2 in the TIA Portal TIA-SERV2
Siemens Certified Service Technician
Level 2 in TIA PortalTIA-SERV3
Beginners Introduction to PLC ST-PLCINTRO Introduction to PLC ST-PLCINTRO✓ ✓
✓ ✓
✓ ✓
✓ ✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 5
Trainings for SIMATIC S7-1500 in the TIA Portal
Level 1
Communication Operate and Monitoring Motion Control
SIMATIC programming 1 in the TIA Portal TIA-PRO1
SIMATIC Motion Control 1
in the TIA PortalTIA-MC1
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
PROFINET with Industrial Ethernet
in the TIA PortalIK-TIAPN
OPC UA – Basics and Configuration IK-OPCUA1
SIMATIC WinCC SCADA
in the TIA PortalTIA-WCCS
SIMATIC WinCC on the machine level
in the TIA PortalTIA-WCCM
SIMATIC Motion Control 2
in the TIA PortalTIA-MC2
SIMATIC WinCC on the machine level
in the TIA Portal system course 2TIA-WCCM2
✓
✓ ✓ ✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 6
Trainings for Totally Integrated Automation
in the Digital Enterprise (TIA in the DE)
Level 1
Basics Programming Programming / Commissioning
Basics of Industrial Security
in the factory automationST-SECFA1 SIMATIC programming 1 in the TIA Portal TIA-PRO1
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
TIA in the DE –
Introduction to StandardizationDI-STAND
OPC UA –
Basics and ConfigurationIK-OPCUA1
TIA Portal Openness
Programming 1DI-OPEN1
SIMATIC programming 2 in the TIA Portal TIA-PRO2
TIA in the DE – Automatic execution
of engineering tasksDI-AUTOEN
TIA in the DE – Virtual Commissioning
for MaschinesDI-VIRTCOM
TIA Portal Openness
Programming 2DI-OPEN2
SIMIT in Discrete Automation Technology
for BeginnersDI-SIMITFA
✓
✓
✓
✓ ✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 7
Trainings for SIMATIC S7-300/-400 STEP 7 V5.x
Level 1
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
Service Training Programming Training Programming Languages
SIMATIC Service 1 in STEP 7 ST-7SERV1 SIMATIC programming 1 in STEP 7 ST-7PRO1
SIMATIC Service 2 in STEP 7 ST-7SERV2 SIMATIC programming 2 in STEP 7 ST-7PRO2
SIMATIC S7
Programming with SCLST-7SCL
SIMATIC S7
Sequence Control with S7-GraphST-7GRAPH
SIMATIC S7
Graphical Programming with CFCST-7CFC
Siemens Certified Service Technician
Level 2ST-SERV3 Siemens Certified Programmer ST-PRO3
Beginners Introduction to PLC ST-PLCINTRO Introduction to PLC ST-PLCINTRO
✓ ✓
✓ ✓
✓ ✓
✓
✓ ✓
Certification coursesCourses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 8
Trainings for SIMATIC S7-300/-400 STEP 7 V5.x
Level 1
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
PROFINET
System CourseST-ETHERPR SIMATIC WinCC flexible
System Course 1ST-WINCCFLEX
Communication Operate and Monitoring Safety
SIMATIC programming 2 in Classic STEP7 ST-7PRO2
SIMATIC WinCC
System CourseST-WINCC
PROFIBUS
System CourseST-PRIFIBU
SIMATIC WinCC flexible
System Course 2ST-WINCCFLEXADV
Programming of safety related SIMATIC S7
controller via Distributed SafetyST-PPDS
Beginners Introduction to
Profibus, Profinet and EthernetSCT-S7NETSIA
Actuator Sensor
Interface CourseIK-ASISYS
✓
✓
✓
✓
✓
✓
✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 9
Trainings on faultfinding and diagnostics
Level 1
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
STE7 Troubleshooting and Diagnostics ST-7TROUBLE TIA Troubleshooting and Diagnostics TIA-TRB
STEP 7 (300/400 CPU’s) TIA Portal (1200/1500 CPU’s)
SIMATIC Classic STEP7ST-7PRO1/
ST-7SERV2
Beginners
✓
✓ ✓
Courses offered
in South Africa✓
TIA PortalTIA-PRO1/
TIA-SERV2✓
© Siemens 20XX
11/20/2019Page 10
Trainings for SIMATIC S7-1200
Level 1
Level 2
Programmers, commissioning engineer,
maintenance personnel, operators
SIMATIC S7-1200
Basic CourseTIA-MICRO1
SIMATIC S7-1200
Advanced CourseTIA-MICRO2
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 11
Industrial
Communication
2
PROFINET, PROFIBUS, Industrial Ethernet,
OPC and Industrial Remote Communication
© Siemens 20XX
11/20/2019Page 12
Trainings for Industrial Communication
PROFINET PROFIBUS ASI
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
PROFINET with Industrial Ethernet
in TIA PortalTIA-PN
Beginners
Level 1
PROFINET
System Course for STEP7ST-ETHERPR
Level 2 PROFIBUS
System Course for STEP7ST-PROFIBU
Actuator Sensor
Interface CourseIK-ASISYS
Introduction to
Profibus, Profinet and EthernetSCT-S7NETSIA
✓
✓
✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 13
Certified Profibus International Courses
PROFINET PROFIBUS
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
Certified Engineer CPN-ENG
Certified Installer CPN-INS
Certified Installer with Troubleshooting CPI-INT
Certified Installer CPI-INSLevel 1
Level 2
Certified Installer with Engineer CPI-INE
✓
✓
✓
✓
✓
Certification coursesCourses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 14
Operator Control
and Monitoring
Systems
SIMATIC HMI
3
SIMATIC WinCC in the TIA Portal,
SIMATIC WinCC V7.x
© Siemens 20XX
11/20/2019Page 15
Trainings for Operator Control and Monitoring Systems
SIMATIC HMI
Level 1
SIMATIC
WinCC V7.x
SIMATIC WinCC in the TIA Portal –
Machine level
SIMATIC WinCC in the TIA Portal –
SCADA
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMATIC WinCC
System CourseST-BWINCCS
SIMATIC WinCC on the machine level in the
TIA Portal System Course 2TIA-WCCM2
SIMATIC WinCC on the machine level in the
TIA PortalTIA-WCCM SIMATIC WinCC SCADA
in the TIA PortalTIA-WCCS
SiVArc – Options of Automatic Visualization
GenerationTIA-SIVARC
Level 2
SIMATIC programming 1
in the TIA PortalTIA-PRO1
SIMATIC programming 1
in the TIA PortalTIA-PRO1SIMATIC programming 1 in STEP 7 ST-7PRO1
✓
✓
✓
✓
✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 16
Digital Enterprise
4
© Siemens 20XX
11/20/2019Page 17
Trainings for the Digital Enterprise
Level 1
Trainings for Totally Integrated
Automation in the Digital Enterprise
Totally Integrated Automation
in the Digital Enterprise – Basics
Totally Integrated Automation in the
Digital Enterprise – Code Generation
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
TIA in the DE –
Introduction CompactDI-INTROC
OPC UA –
Basics and ConfigurationIK-OPCUA1
Basics of Industrial Security
In the factory automationST-SECFA1
TIA in the DE –
Introduction to StandardizationDI-STAND
SIMATIC programming 1
in the TIA PortalTIA-PRO1
TIA Portal Openness
Programming 1DI-OPEN1
TIA in the DE – Automatic execution
of engineering tasksDI-AUTOEN
TIA Portal Openness
Programming 2DI-OPEN2
SIMATIC programming 2
in the TIA PortalTIA-PRO2Level 2
✓ ✓
✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 18
Totally Integrated Automation in the Digital
Enterprise – Virtual Commissioning
Totally Integrated Automation in the Digital
Enterprise – Specialization CoursesDigitalization in the Process Automation
Trainings for the Digital Enterprise
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMATIC PCS 7
System CourseST-PCS7SYS
SIMATIC programming 2
in the TIA PortalTIA-PRO2
TIA in the DE – Virtual Commissioning
for MachinesDI-VIRTCOM
SIMATIC PCS 7 Integrated
Engineering and SimulationST-PCS7INS
Energy management
with SIMATIC Energy SuiteTIA-EMES
SiVArc – Options of Automatic Visualization
GenerationTIA-SIVARC SIMIT in Process Automation ST-PCS7SIM
PROFINET and H-Systems in the
Process AutomationST-PCS7PNH
SIMATIC PCS 7 Plant Automation
Accelerator Workshop for beginnersST-PCS7PAA
SIMIT in Discrete Automation Technology
for BeginnersDI-SIMITFA
Level 1
Level 2
✓
✓
✓ ✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 19
Drive Technology
SINAMICS
5Low Voltage Converter
SINAMICS G120, SINAMICS S120
SINAMICS G130 / G150 / S150
SINAMICS DCM
SINAMICS Medium Voltage Converter
SIMOTICS Motors
© Siemens 20XX
11/20/2019Page 20
Trainings for SINAMICS G120
Basics
Planners, decision makers
and sales personnel
Commissioning engineer,
programmers
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
Introduction to Drives DR-DRV-FUN
SINAMICS G120 – Parameterizing
and CommissioningDR-G12-PM
SINAMICS G120 – Parameterizing
and CommissioningDR-G12-PM
SINAMICS G120 – Parameterizing
AdvancedDR-G12-PA
Level 1
Level 2
Introduction to Drives DR-DRV-FUN Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓ ✓ ✓
✓ ✓
✓
© Siemens 20XX
11/20/2019Page 21
Trainings for SINAMICS S120
Basics
Planners, decision makers
and sales personnel
Commissioning engineer,
programmers
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows
SIMOTICS Motion Control Motors –
Planning and EngineeringDR-MCM-PL
SINAMICS S120 –
Planning and EngineeringDR-S12-PL
SINAMICS S120 – Parameterizing
and Commissioning in the TIA PortalDR-S12-PMT
SINAMICS S120 –
Diagnostics and ServiceDR-S12-DG
SIMOGEAR Geared Motors –
Planning and EngineeringDR-SGM-PL
SINAMICS S120 –
Parametrieren Safety IntegratedDR-S12-SAF
SINAMICS S120 –
Parameterizing AdvancedDR-S12-PA
Level 1
Level 2
SINAMICS S120 – Parameterizing
and CommissioningDR-S12-PM
SINAMICS S120 –
Parameterizing Safety IntegratedDR-S12-SAF
SINAMICS S120 – Upgrade to TIA Portal
and StartdriveDR-S12-UP
SINAMICS S120 –
Parameterizing and OptimizationDR-S12-OPT
SINAMICS S120 – Diagnostics at Chassis-
and Cabinet UnitsDR-S12-CHA
SINAMICS S120 – Diagnostics
PROFINET and PROFIBUSDR-S12-NET
Introduction to Drives DR-DRV-FUN Introduction to Drives DR-DRV-FUN Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓
✓
✓
✓
✓
✓
✓
✓
© Siemens 20XX
11/20/2019Page 22
Trainings for SINAMICS G150 / G130 / S150
Basics
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SINAMICS G150 / G130 / S150 –
Diagnostics and ServiceDR-G15-DGLevel 1
Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓
✓
© Siemens 20XX
11/20/2019Page 23
Trainings for SINAMICS DCM
Basics
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SINAMICS DCM –
Diagnostics and ServiceDR-DCM-DGLevel 1
Level 2 SINAMICS DCM –
Parameterizing AdvancedDR-DCM-PA
Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓
✓
© Siemens 20XX
11/20/2019Page 24
Trainings for SINAMICS Medium Voltage Converter
Basics
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SINAMICS Perfect Harmony GH150 –
Diagnostics and ServiceDR-GH15-DGLevel 1
SINAMICS Perfect Harmony GH180 –
Diagnostics and ServiceDR-GH18-DG
SINAMICS GL150 –
Diagnostics and ServiceDR-GL15-DG
SINAMICS GM150 –
Diagnostics and ServiceDR-GM15-DG
SINAMICS SL150 –
Diagnostics and ServiceDR-SL15-DG
SINAMICS SM150 –
Diagnostics and ServiceDR-SM15-DG
Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓
✓
© Siemens 20XX
11/20/2019Page 25
Motion Control
6
© Siemens 20XX
11/20/2019Page 26
Trainings for Motion Control
SIMOTION
Level 1
Commissioning engineer,
programmers
Service personnel,
maintenance personnel
SIMOTION –
Programming AdvancedMC-SMO-PA
SIMOTION –
Programming and CommissioningMC-SMO-PM
SIMOTION und SINAMICS S120 –
Diagnostic and ServiceMC-SMO-DG
siemens.com/sitrain-simotion
Level 2
Courses offered
in South Africa✓
✓
✓
✓
© Siemens 20XX
11/20/2019Page 27
Trainings for Motion Control
SIMATIC
Level 1
Commissioning engineer,
programmers
SIMATIC – Motion Control 2
in the TIA PortalTIA-MC2
SIMATIC programming 1
in the TIA PortalTIA-PRO1
Level 2
SIMATIC – Motion Control 1
in the TIA PortalTIA-MC1
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
Courses offered
in South Africa✓
✓
✓
✓
© Siemens 20XX
11/20/2019Page 28
Process
Instrumentation
Courses
7
© Siemens 20XX
11/20/2019Page 29
Trainings for Process Instrumentation
Level 1
Instrumentation Tech’s & Maintenance
Flow Instruments PI-FLOW
Fundamentals of Process Instrumentation PI-FUN
Pressure, Temperature and Positioners PI-PTP
Level 2
Basics
Level Instruments PI-LVL
Weighing Instruments PI-WNG
✓
✓
✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 30
Process Control
Systems
SIMATIC PCS 7
SIMATIC PCS neo
8
SIMATIC PCS 7, SIMATIC PCS neo
© Siemens 20XX
11/20/2019Page 31
Trainings for SIMATIC PCS 7
Level 1
Planning and Engineering Extensions and Technology Service
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
Siemens SIMATIC PCS 7
Basic EngineerCP-PCS7-1
SIMATIC PCS 7
System CourseST-PCS7SYS
SIMATIC PCS 7
AS-EngineeringST-PCS7ASE
SIMATIC PCS 7
OS-EngineeringST-PCS7OSE
SIMATIC PCS 7
Service 1ST-PCS7SR
Introduction of the technologic libraries
in SIMATIC PCS 7ST-PCS7LIB
PCS 7
Batch CourseST-PCS7BAT
Siemens Certified
SIMATIC PCS 7 EngineerCP-PCS7-2
Level 2
✓
✓
✓
✓
✓
Certification coursesCourses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 32
Safety
Trainings for SIMATIC PCS 7
Level 1
Digital Enterprise for the
Process Automation
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMATIC PCS 7
System CourseST-PCS7SYS
SIMATIC PCS 7
Process SafetyST-PCS7SAF
SIMIT in Process Automation ST-PCS7SIM
SIMATIC PCS 7 Plant Automation
Accelerator Workshop for beginnersST-PCS7PAA
SIMATIC PCS 7 – Integrated
Engineering and SimulationST-PCS7INS
Level 2
PROFINET and H-Systems
in the Process AutomationST-PCS7PNH
✓
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 33
Trainings for SIMATIC PCS neo
Level 1
Future of the Process Automation
SIMATIC PCS neo
System Training for PCS 7 EngineersNEO-SYSUP
SIMATIC PCS neo
System Training for BeginnersNEO-BASIC
siemens.com/sitrain-simaticpcsneo
Level 2
Courses offered
in South Africa✓
© Siemens 20XX
11/20/2019Page 34
SITRAIN – Training for Industry
Thank you for your attention!
We‘ll help you!
All product related info: 0860 80 80 80
Training information:
Tel: 011 652 3206
Or... on the Internet:
Online booking
www.siemens.co.za/sitrain