410 General Catalogue Conchiglia Line 2018
Signallers for roadways, road junctions and acceleration / deceleration lanes 2 lights with LED lamp: LSA23 - LSA24 seriesThe signallers of Conchiglia for road lanes interchanges and acceleration and deceleration lanes represent an innovative solution for the improvement of road safety, particularly useful in low visibility.
Equipped with a LED lamp (In compliance with UNI EN 12352. CE certification according to CPD89/106/CEE) with 2 concentric lights (LSA23) or upper/lower lights (LSA24), the signs provide three signalling modes:
• alternately flashing external/internal light or upper/lower light;• animated, with the two lamps going on and off simultaneously;• with the two lamps permanently on.
The signallers installed on the lane way, allows three essential functions for road safety and highway:
• delineation of the board of the carriageway according to road legislation;• reporting danger through the switch on in flashing or run-up mode of the LED lamp, particularly to indicate access road, roundabouts or road crossings.
Road signals with 2 lights
411General Catalogue Conchiglia Line 2018
LSA23 SERIES with 2 concentric lights with Led lamp (Patented)Lamp in compliance with UNI EN 12352. certification according to CPD 89/106CEE. Approved by Ministry of Infrastructure and Transport prot. N. 4079
LSA33/GE/F
MaterialsTop made of white polyamide resin. Tubular support made of high molecular density polythene with high resistance to UV rays.AISI 304 stainless steel screws.4 x 16 mm² terminal block supplied.Optical apparatusLamp consisting of 47 7 cd amber colored LEDs, wavelength 592 nm distributed on two independent circuits: 36 LEDs on outer circular crown with inner diameter 95mm – outer diameter 145 mm (po-wer input 2,4 VA) and 11 LEDs on central surface with outer diameter 60 mm (power input 1.2 VA).Orange colored upper reflex reflector (diameter 80).Removable coulisse sliding cover for access to optical apparatus can be closed with a latch by means of a tool.Top dimensions210 x 423 x 128mm.Power supplyBy means of control units CSE3/220/50/13 - CSE3/220/50/23; input voltage 230 Vac; output voltage 48 Vac.Protection degree: IP 43 in accordance with CEI EN 60529.Protection against impact: IK 08 in accordance with CEI EN 62262.Protection degree of optical apparatus: IP 67 in accordance with CEI EN 60529.Applications: Exits, bends and dangerous sections. Roundabouts and cross-roads. Acceleration and deceleration lanes motorways and highways.Versions..../F - For mounting on tubular support 1 1/2” G (diam. 49) with smooth end.
Installation Model Code
With lower opening ø 49 mm for mounting 1 1/2’’ tube head LSA33/GE/F 061332508
Road signals with 2 lights
Tubular support for indicator LSA33In hot-dip galvanized steel.Diecast anodized aluminium flange for locking onto prefab concrete plinth.
Installation Model Code
From the road surface to the centre of the lamp Height 900 mm with tolerance of 100 mm TC/48/F 095561502
From the road surface to the centre of the lamp Height 1300 mm with tolerance of 240 mm TL/48/F 095562484
412 General Catalogue Conchiglia Line 2018
Road signals with 2 lights
LSA34/GE/F
MaterialsTop made of white polyamide resin. Tubular support made of high molecular density polythene with high resistance to UV rays.AISI 304 stainless steel screws.4 x 16 mm² terminal block supplied.Optical apparatusLower lamp consisting of 47 LEDs, amber coloured, 7 cd, wavelength 592 nm. Power input 3.6 VA.Upper lamp consisting of 14 LEDs, amber coloured, 7 cd, wavelength 592 nm. Power input 1.2 VA.Removable coulisse sliding cover for access to optical apparatus can be closed with a latch by means of a tool.Top dimensions210 x 423 x 128mm.Power supplyBy means of control units CSE3/220/50/13 and CSE3/220/50/23; input voltage 230 Vac; ou-tput voltage 48 Vac.Protection degree: IP 43 in accordance with CEI EN 60529.Protection against impact: IK 08 in accordance with CEI EN 62262Protection degree of optical apparatus: IP 67 in accordance with CEI EN 60529.Applications: Exits, bends and dangerous sections. Round abouts and cross-roads. Acceleration and deceleration lanes motorways and highways.Versions.../TP - Complete with support with 1 1/2” G swivel ball joint made of anodized aluminium alloy for fixed applications on wells. Height lamp centre – support surface of joint 940 mm..../TLP - Complete with support with 1 1/2” G swivel ball joint made of anodized aluminium alloy for fixed applications on wells. Height lamp centre – support surface of joint 1270 mm..../F - For mounting on tubular support 1 1/2” G (diam. 49) with smooth end.
Installation Model Code
With lower opening diameter ø 49 mm for mounting 1 1/2’’ tube head LSA34/GE/F 061342508
LSA34 SERIES with 2 upper/lower lights with led lamp (Patent)Lamps that comply with the standard UNI EN 12352: 2006 with marking according to the European regulation no. 305/2011 (c.d. CPR). Approved by Ministry of Infrastructure and Transport prot. N. 4086
Support pipe for signaling LSA34In hot-dip galvanized steel.Anodized die-cast aluminum flange for blocking on prefabricated concrete blocks.
Installation Model Code
Height from the cockpit to the lower center lamp 900/940 mm TC/48/F 095561502
Height from the cockpit to the lower center lamp 1300/1400 mm TL/48/F 095562484
413General Catalogue Conchiglia Line 2018
Accessories and spares road signals with 2 lights
LED LampsLED lamp for signals LSA23-LSA24 - Lower LED lamp for signals LSA20 – LSA21
LL247/50
MaterialsPolyamide resin body PA 6.Protection shield made of transparent polycarbonate resistant to UV rays.CharacteristicsIn compliance with UNI EN 12352. CE certification according to CPD89/106/CEE, consisting of 7 cd amber coloured 47 LEDs wavelength 592 nm distributed on two independent circuits: 36 Led on outer circular crown with diameter 160 mm, power input 2.4 VA and 11 LED on central surface with outer diameter 70 mm, power input 1.2 VA.Supply voltage 48 Vac.ApplicationsFor spares for signals LSA23/GE/... and lower lamp LSA24/GE...For replacement of existing optical apparatus signals LSA21/GE/... already installed.Protection degree of optical apparatus IP 67 in accordance with CEI EN 60529.
Signal type Description Model Code
LSA33-LSA34 (inferiore)-LSA21/GE/.. 47LED colore Ambra.48Vac LL247/50* 095622908
*Flashing classes according to UNI EN 12352:2006. External frame: L2H-P1-C Yellow-R0-A0-F2-O1-M3-T1-S0. Internal frame L2H-P1-C Yellow-R0-A0-F2-O1-M3-T1-S0
Upper LED lamp for signals LSA24
LL114/50
MaterialsPolyamide resin body PA 6.Protection shield made of transparent polycarbonate resistant to UV rays.CharacteristicsLamp consisting of 7 cd amber colored 14 LEDs wavelength 592 nm distributed on circular surface with outer diameter 80 mm, power input 1.2 VASupply voltage 48 Vac.ApplicationsFor spares for signals LSA23/GE/... and lower lamp LSA24/GE...For replacement of existing optical apparatus signals LSA21/GE/... already installed.Protection degree of optical apparatus IP67 in accordance with CEI EN 60529.
Signal type Description Model Code
LSA34 (upper) - LSA21/GE/.. 14 LED mber coloured 48Vac LL114/50* 095622627
*Flashing classes in accordance with UNI EN 12352:2006. L2L-P1-C Yellow-1-R0-A0-F2-O1-M3-T1-S0.
414
Accessories and spares road signals with 2 lights
LS16/ALS8/A
LensesLenses for signals LSA20 – LSA21
Materials: Moulded in coloured acrylic resin.Characteristics: Concentric circular internal prismal effect and honeycombed external shaping.
Signal type Bottom lenscolor
Top lenscolor Model Code
LSA20/R/.. - LSA20/RE/.. Red LS16/R 095632212
LSA20/GEH/.. - LSA20/GH/.. - LSA20/GL/.. Yellow LS16/G 095632220
LSA21/GE/.. - LSA20/GE/.. Orange LS16/A 095632238
LSA21../.. Red LS8/R 095632816
LSA21/GE/.. Orange LS8/A 095632832
LampsSignal type Description Model Code
LSA20/RE/.. - LSA20/GE/.. - LSA21/GE/..** Incandescence – E14 – 10W* L14/50/10 095622510
LSA33-LSA34 (lower) - LSA21/GE/.. -LSA20/GE.. 47 LED amber coloures - 48Vac LL247/50 095622908
LSA34 (upper) - LSA21/GE/.. 14 LED amber coloures - 48 Vac LL114/50 095622627
*The type of supply defines voltage lamp.**For supply through CSE/220/50/..and CSE3/220/50/..are available lamps 50V-10W-E14 version L14/50/10 – Code 095622510
421General Catalogue Conchiglia Line 2018
CS3/… alternate flashing gear cases series for LSA23/… e LSA24/...LSA25/.. – LSG/.. signallersCharacteristics:Electronic gear cases for day use predispose to be mounted in 517x543x260 size boxes equivalent to the CVT /....fiber glass box, IMQ certified, with IP44 protection degree according to CEI EN 60529, IK10 in compliance with CEI EN 62262.Enclosure installations: wall, pole, floor.Predisposition for remote control power or other systems.
This two models differs only by the loading current flow (13 e 23 A) and each unit is prepared to work:• flashing (on/off);• alternate flashing (two flashes on 1, off 2; off 1; on 2);• 3 channels run up.
Power supplyPower supply: 230 Vac. Voltage output: 48 Vac.Number of output channels: 3.The gear case 230 Vac power line can be controlled through one or more external signals (such as twilight type and/or fog detection sensor) to allow the activation of the signalling system due to different needs.The system must be wired according to the type of operation chosen. Up to 4 units can be synchronized
Electronic control units for signal lights
Model Code
CSE3/230/50/13 095613055
CSE3/230/50/13 Gearcase
Maximum load per 13 A channel, equivalent to:• 45 single flashing signallers,• 75 alternating flash signallers,• 45x3 running up channels.
CSE3/230/50/13(Execution enclosure to be
ordered separately)
Model Code
CSE3/230/50/23 095613071
CSE3/230/50/23 Gearcase23 A maximum load per channel, equivalent to 7• 5 single flash signallers,• 120 alternating flash signallers,• 75x3 running up channels
422 General Catalogue Conchiglia Line 2018
LEA/C2L
Blinkers for control units (spare parts until exhaustion)
Application characteristics Power supplyvoltage rating
No. flashesperminute Type of control unit Model Code
2 channels alternate flashing.Octal plug 24-48 Vac 50-60 CSE2/220/.. LEA/C2L 095602512
To synchronize flashes of 2 ormore control units CSE2/.. 24 Vac 50-60 CSE2/SCL LEA/S2L 095602595
Type of plant Type of container
CSE3/230/50/13 CVT and branch
CSE3/230/50/23 CVT and branch
Series CSE/...containers for control units
CSE3/230/50/13(enclosure execution)
Electronic control units for signal lights
423General Catalogue Conchiglia Line 2018
Electronic probe for fog detectionDimensionsOverall dimensions (including receiver and transmitter) 450 x 450 x 172.Materials• Box made of die-cast UNI EN 1706 AC - 44100 aluminium alloy.• Hinged cover with neoprene seal.• Cover closed by self-locking knobs with stainless steel screws.• Electronic components on galvanically protected vetronite board.• Switch for dusk-dawn activation and deactivation.• Bipolar relay with switch contacts for fog, dusk-dawn sensor and heater powering.Protection degreeIP55 in compliance with CEI EN 60529, IK 10 according to CEI EN 62262.ExecutionTo fix to poles with 11/2“ GAS (Ø 48) collar.To fix to walls by means of feet.Technical/functional specifications• Power supply: 48/110/230 V-50 Hz.• Operating range: 0÷4000 Lux.• Dusk setting: 10÷100 Lux.• Automatic signal activation delay: 35÷160 sec.• Automatic signal deactivation delay: 3÷6 min.• Dusk function activation and deactivation delay: 45 sec.• Fog sensor relay capacity (N.O.): 5 A 250 V.• Heater power relay capacity (N.O.): 5 A 250 V.• Dusk function relay capacity (N.O.): 5 A 250 V.• Heater regulating thermostat: 5÷15° C.• Operating temperature: -20° C +50° C.• Recommended power rating for heater (excluded): 20÷50 W max.• Circuit activation and autodiagnosis signalling: LED (red and green).
Electronic probe for fog detection
Probe SRN 300 is an electronic device that detects fog, fumes, dust, snow, hail, heavy rain and automatically activates or deactivates the relative signal-ling systems on roads, motorways, car parks, navigable rivers and canals and coastal navigation areas. The probe has an electronic infrared reflecting system with adjustable sensitivity threshold corresponding to a visibility of 80 to 400 m.Not influenced by noise or heat.
Model Code
SRN300/E2 081913022
SRN300/E2