Download - Short questions
Basic Concepts 1.docxBasic Concepts 1:
1. Draw the following waveforms.
1. 2cos(2*pi*4*t )2. 2cos(2*pi*4*t + 300)3. 2sin(2*pi*4*t )
2. What is the physical interpretation of phase in time domain?3. Let the phase difference between two cosine waves of frequency 50Hz is 30 degrees.
What would be the corresponding time delay (Ans. 1.66msec)4. Let v(t) = 120cos(wt + 20) and i(t) = 30cos(wt – 30). Which one is lagging and which one
is leading.5. Let v(t) = 120cos(wt + 220) and i(t) = 30cos(wt – 30). Which one is lagging and which
one is leading. (Ans. Current is leading as +220o = -1400).6. Let v(t) = 120cos(wt + 220) and i(t) = 30cos(wt – 30). Determine their phasors and plot
them on phasor diagram.7. What is the phasor plot of the quantity 25ej30ejwt?8. What is meant by impedance? What is meant by admittance? What is meant by
Reactance?9. Why does when a circuit is transformed into phasor domain all the techniques of resistive
circuit analysis become valid.10. What are the impedance and admittance and reactance of R, L and C.?11. What is the phase difference of a voltage and current across a resistor? Which one is
leading?12. What is the phase difference of a voltage and current across a capacitor? Which one is
leading?13. What is the phase difference of a voltage and current across an inductor? Which one is
leading?14. For the circuit shown below, what is the difference between the phase of output voltage
and current? If we want to reduce this phase difference to zero degrees what should be done.
Edit this page (if you have permission)–Published by Google Docs–Report Abuse–Updated automatically every 5 minutes