-
ISLE OF CAPRI
The Isle of Capri bollard shall feature a cast aluminum cap with a conical reflector, a heavy wall aluminum body, an electronic ballast with quick disconnects, G12 or medium base socket, (lamps by others) a 4”OD frosted or white acrylic diffuser.
Comes with (3) 3/8"OD x 12"L galvanized steel anchor bolts with two nuts and two washers each and steel template to install bolts on 3-3/4” bolt circle. All hardware and steel templates included.
Finished in smooth semi-gloss TGIC polyester powder coat (dual colors available, see below picture for an example)
Choice of five standard colors: black (BLK), bronze (BRZ), green (GRN), grey (GRY) and white (WHT). Other colors available for an additional charge.
Specifications
Bollards
IOC Isle of Capri bollard
39MH50MH70MH
BP button photocell
BLK blackBRZ bronzeGRN greenGRY greyWHT whiteCTM custom
SH37
The SH37 series luminaire shall consist of a diffuser, capital, ballast assembly, an internal optical system, a shade and a top cap. The shade and the top cap shall be supported by aluminum struts, which shall be permanently secured to the capital. The diffuser shall be secured to the cast aluminum capital by positive preassure. All castings shall be formed true to pattern, with no warping or mold shifting. The shade shall be made of an aluminum spinning.
The electrical components shall be mounted within the luminaire and shall be protected by a spun aluminum ballast chamber. The medium porcelain socket shall be 4KV pulse rated. The HID ballast shall be HPF, CWA, multi-tap, supplied with capacitor and ignitor. Luminaire shall be certifed to UL 1598 as suitable for wet locations. Lamps by others. Optical assembly shall be mechani-cally secured to the capital.
The luminaire shall mount to a 4”OD x 4”H tenon with four stain-less steel tamper resistant Allen set screws. All exposed hardware is stainless steel. All exposed metal parts shall receive baked-on smooth semi-gloss powder coat finish. Ships boxed and pallet-ized.
Luminaire
SH37
Diffuser
CA clear acrylic
Ballast
5M - 50MH7M - 70MH10M - 100MH15M - 150MH
5H - 50HPS7H - 70HPS10H - 100HPS15H - 150HPS
Voltage
1 - 120V2 - 208V3 - 240V4 - 277V5 - 347V
Optics
BA - bare lampR5 - glass refrac-tor IES VR3 - glass refrac-tor IES IIILV - louver stack IES V
Options
HS - house side shieldSF - single fuseDF - double fuseBP - button photocell
Color
BLK - blackGRN - greenBRZ - bronzeGRY - grey WHT - whiteCTM - custom
Suggested pole and bracket combinations
Specifications
SP10
SA05-A
CA
© 2010 Sheridan Lighting Systems, Inc. All rights reserved. Specifications subject to change without notice.
Sheridan Lighting Systems, Inc. T 905-369-0101 F 905-369-0102 [email protected] www.sheridansys.com
We see what moves you.
REMOVABLE ALUMINUM CAP FOR ACCESS TO LAMP AND BALLAST
CLEAR UV STABILIZEDACRYLIC DIFFUSER
ALUMINUM SHADE
LOUVER ASSEMBLY
ED17 LAMP (BY OTHERS)
EXTRUDED ALUMINUMBALLAST HOUSING
BALLAST ASSEMBLYON A REMOVABLE PLATE W/ QUICK DISCONNECTS
4"ID SLIP FITTERSECURED WITHFOUR S/S SCREWS
Sheridan Lighting Systems, Inc. T 1-866-667-9517 E [email protected] W www.sheridansys.com
© 2016 Sheridan Lighting Systems, Inc. All rights reserved. Specifications subject to change without notice.
IOC
FA frosted acrylic
WA white acrylic
Bollard Diffuser Wattage Options Color
Sample configuration.
4" DIA HEAVY WALLLIGHTLY FROSTEDACRYLIC TUBE
Ø3.75" B.C.
48"
4"
SPECULAR CONICALALUMINUM REFLECTOR
CAST ALUMINUM CAPPERMANENTLYAFFIXED TO THELENS
8 1/2"
16"
120-277VELECTRONICBALLAST
3/8"Ø x 12"LTHREE GALVANIZEDANCHOR BOLTS(1.5" BOLT PROJ.)
70W, T6 LAMP(BY OTHERS)
G12PORCELAINSOCKET
POLISHED SPUNALUMINUMREFLECTOR
Isle of CapriType SB
PD123261
Date: Mar. 26, 2012
Model:
Top cap: Cast aluminum cap with conicalreflector.
Bollard body: heavy wall aluminum tube
Ballast: 70W ANSI M98, M139, M143,120V-277V electronic, with quickdisconnects.
Socket: G12
Lamps: T6 (by others)
Lens: 4"OD lightly frosted acrylic tube
Optics: highly polished conicalaluminum reflector top and bottom
Installation:three 3/8"OD x 12"L galvanized steel anchorbolts with two nuts and two washerseach and steel template to install bolts on3 3/4" bolt circle. All hardware and steeltemplates included.
Finish: smooth semi-gloss TGIC polyesterpowder coat
Color: five standard colors:black (BLK), bronze (BRZ), green (GRN),grey (GRY) and white (WHT). Othercolors available for an additional charge
© 2012 Sheridan Lighting Systems, Inc. All rights reserved. Specifications subject to change without notice.T 905-369-0101 F 1-800-270-8729
FA 39MH BP BLK
RAL 9003 and 9007
4" DIA HEAVY WALLLIGHTLY FROSTEDACRYLIC TUBE
Ø3.75" B.C.
48"
4"
SPECULAR CONICALALUMINUM REFLECTOR
CAST ALUMINUM CAPPERMANENTLYAFFIXED TO THELENS
8 1/2"
16"
120-277VELECTRONICBALLAST
3/8"Ø x 12"LTHREE GALVANIZEDANCHOR BOLTS(1.5" BOLT PROJ.)
70W, T6 LAMP(BY OTHERS)
G12PORCELAINSOCKET
POLISHED SPUNALUMINUMREFLECTOR
Isle of CapriType SB
PD123261
Date: Mar. 26, 2012
Model:
Top cap: Cast aluminum cap with conicalreflector.
Bollard body: heavy wall aluminum tube
Ballast: 70W ANSI M98, M139, M143,120V-277V electronic, with quickdisconnects.
Socket: G12
Lamps: T6 (by others)
Lens: 4"OD lightly frosted acrylic tube
Optics: highly polished conicalaluminum reflector top and bottom
Installation:three 3/8"OD x 12"L galvanized steel anchorbolts with two nuts and two washerseach and steel template to install bolts on3 3/4" bolt circle. All hardware and steeltemplates included.
Finish: smooth semi-gloss TGIC polyesterpowder coat
Color: five standard colors:black (BLK), bronze (BRZ), green (GRN),grey (GRY) and white (WHT). Othercolors available for an additional charge
© 2012 Sheridan Lighting Systems, Inc. All rights reserved. Specifications subject to change without notice.T 905-369-0101 F 1-800-270-8729
4" DIA HEAVY WALLLIGHTLY FROSTEDACRYLIC TUBE
Ø3.75" B.C.
48"
4"
SPECULAR CONICALALUMINUM REFLECTOR
CAST ALUMINUM CAPPERMANENTLYAFFIXED TO THELENS
8 1/2"
16"
120-277VELECTRONICBALLAST
3/8"Ø x 12"LTHREE GALVANIZEDANCHOR BOLTS(1.5" BOLT PROJ.)
70W, T6 LAMP(BY OTHERS)
G12PORCELAINSOCKET
POLISHED SPUNALUMINUMREFLECTOR
Isle of CapriType SB
PD123261
Date: Mar. 26, 2012
Model:
Top cap: Cast aluminum cap with conicalreflector.
Bollard body: heavy wall aluminum tube
Ballast: 70W ANSI M98, M139, M143,120V-277V electronic, with quickdisconnects.
Socket: G12
Lamps: T6 (by others)
Lens: 4"OD lightly frosted acrylic tube
Optics: highly polished conicalaluminum reflector top and bottom
Installation:three 3/8"OD x 12"L galvanized steel anchorbolts with two nuts and two washerseach and steel template to install bolts on3 3/4" bolt circle. All hardware and steeltemplates included.
Finish: smooth semi-gloss TGIC polyesterpowder coat
Color: five standard colors:black (BLK), bronze (BRZ), green (GRN),grey (GRY) and white (WHT). Othercolors available for an additional charge
© 2012 Sheridan Lighting Systems, Inc. All rights reserved. Specifications subject to change without notice.T 905-369-0101 F 1-800-270-8729
mailto:[email protected]://www.sheridansys.commailto:[email protected]://www.sheridansys.com