![Page 1: Science Fair Project Airplane Production Procedure](https://reader030.vdocuments.site/reader030/viewer/2022021221/577c7f881a28abe054a4f8f9/html5/thumbnails/1.jpg)
8/17/2019 Science Fair Project Airplane Production Procedure
http://slidepdf.com/reader/full/science-fair-project-airplane-production-procedure 1/2
Airplane Folding Procedure:
*Adjust the angle for more/less angle degree between the
wing and the stem
7). Glue top flaps together for
paper clip storing
). !urn o"er# and fold inward at
center
$). Fold toward center
%). &tart with a plain piece
of paper
'). Fold toward center again
(). Fold the paper in half )*. Fold corner toward center# and then turn o"e
![Page 2: Science Fair Project Airplane Production Procedure](https://reader030.vdocuments.site/reader030/viewer/2022021221/577c7f881a28abe054a4f8f9/html5/thumbnails/2.jpg)
8/17/2019 Science Fair Project Airplane Production Procedure
http://slidepdf.com/reader/full/science-fair-project-airplane-production-procedure 2/2
Place a binder clip on the midpoint of the stem. eplace the binder clip wing
with ( paper clip for pull bac+ use when fl,ing the airplane. &ecure the
paperclip.
-astl,# optional# but if done to one control group# must be done to all) place
a sil"er clip of on the rear of the airplane to gi"e it balance.