partel.com
Save energy.Build smart.
partel.com
ABOUT PARTELFounded in 2011 by Hugh Whiriskey, Partel is a company that produces and supplies high performance, energy-efficient systems in order to build smart.
Established in the West of Ireland, we have experienced quick and healthy growth. Today we have a presence in 3 regions, Ireland, UK and recently North America. We provide a wide range of Airtight and Windtight Systems for the low-energy building sector.
Partel’s portfolio has been developed with new products, offering builders a combination of technical expertise, functionality, sustainable quality and price. VARA, IZOPERM, EXOPERM, CONIZO and CONEXO are some of our brands which cover a wide range of internal and external applications. We continue to expand our portfolio with innovative systems including membranes, tapes and adhesives that inspire green building.
Technical excellence is at the core of our product development. We invest in high-performance products to support innovation and quality of life, with an unwavering focus on sustainability.
Energy consumption will continue to increase in the next decades. The solution is efficiency – Save energy. Build Smart.
For that, we leverage technological innovation to use less energy, and to use the energy that we do consume, more intelligently.
BENEFITS TO ENHANCE THE BUILDING PERFORMANCE, IN EACH PRODUCT
M Reduce energy consumption M Improve air quality M Reduce noise M Reduce heating/cooling costs M Thermal and humidity protection M Minimise pollutants for homeowners M Avoid structural damage M Achieve specified R/U values
Our background and expertise in Engineering, Architecture and Building physics will ensure the best-solutions for every construction challenge:
M Customised technical support M WUFI condensation risk analysis M Onsite inspections M CPD Training and Seminars
BEST PRACTICE FOR AIR & WINDTIGHT STRUCTURESThis RIBA Approved CPD focuses on the importance of air and wind tightness in low-energy building design. It discusses the importance of external and internal membranes, their sealing and highlights best practice on how to specify and install. It also focuses on the risks associated with airtight buildings and how best to overcome these. The duration of this seminar is 45 minutes presentation plus a 10 minute questions & answers session.
Partel Business Development Managers are available for CPD bookings across the whole of the UK and Ireland.
CONTACT PARTEL ON +353 (0) 818 33 33 55 OR EMAIL [email protected]
TECHNICAL WARRANTYWE OFFER A 10 YEAR LIMITED WARRANTY AND A COMPREHENSIVE LIMITED SYSTEM WARRANTY.
The system warranty applies to the Partel Airtight and Windtight systems. It applies where Partel products are installed in as part of a complete Partel system insofar as Partel products are available. The terms of this warranty varies per region. Please refer to your local website for current information.
systemwarranty
5
SMART VAPOUR CONTROL MEMBRANE
Why Partel VARA PLUS?
M Best SD value range (Humidity variable vapour Sd-values from 0.4 m to >60 m) ensures optimum summer drying conditions and winter protection
M Optimal airtightness and water vapour transmission rate in different climate conditions
M Elastic and durable
M Reinforced for optimal strength
M Durable towards UV ageing
M Optimal protection against humidity, ensures drying of the building structure
M Extremely safe system
M Easy and quick to install
M Energy-efficient
M Increased durability of buildings
M Reduced heating/cooling costs
Weight EN 1849-2 110
Sd- Value EN 1931 0.4 m to > 60 m
Temp resistance -40° to 80°C
Tensile strength EN 12311-2 MD 350 / CD 315
Nail Tear resistance EN 12310-1 MD 350 / CD 375
1.5m X 50m=75m2
59-1/16” X 164’-1/2” = 807 SF
M Internal use
M Suitable for all insulation types
M Roof and timber frame wall
Fields of Application
PARTEL.COM
Flexible, airtight, smart vapour control layer
M Permeable to water vapour
M Excellent adhesion on various surfaces
M Ready-to-use product shortens application time, especially in commercial projects
M Ensures a continuous, flexible and permanent airtight
M Designed to achieve Passive Standard 0.6 AC/h in buildings, but can reach 0.2 AC/h if required
M Durable airtight connections
M LOW VOC polymer-based liquid
Why Partel VARA FLUID?
M Roller
M Airless paint spray device
Easy to apply with
M Internal and external use
M Can be applied both vertically and horizontally
M Wall to floor
M Wall to ceiling
M Wall to timber
M General construction joints
Fields of Application
FLUID FLUID
Quantity
UV RESISTANCE 3 MONTHS
SD VAPOR VARIABILITY EN-ISO 12572 0.15-16 @ 0.3MM
USAGE (DEPENDS ON SURFACE) MIN 500G/M2
WATER RESISTANCE EN-1928 W1
PROCESSING TEMPERATURE +5OC
FLUID FLUID
� No need for primer
FLEXIBLE, airtight,smart vapour control layer
� PERMEABLE TO WATER VAPOUR
� GOOD ADHESION ON DIFFERENT SURFACES
� READY-TO-USE, FAST APPLICATION
� FLEXIBLE, ENSURES ADEQUATE COVERAGE
� IDEAL FOR DURABLE BUILDING CONNECTIONS
partel.com
wall to floor /
wall to ceiling /
WALL TO TIMBER /
general construction joints
Internal & External Use
10KG
10KG
VARA FLUID is a breathable liquid membrane engineered to provide superior airtightness for long-term performance of the building envelope.
7
PAINT-ON airtight,smart vapour control layer
� PERMEABLE TO WATER VAPOUR
� GOOD ADHESION ON DIFFERENT SURFACES
� READY-TO-USE, FAST APPLICATION
� FLEXIBLE, ENSURES ADEQUATE COVERAGE
� IDEAL FOR DURABLE BUILDING CONNECTIONS
� No need for primer partel.com
wall to floor / wall to ceiling /
WALL TO TIMBER /
pipe & ducting penetrations /
general construction joints
Internal & External Use
5KG
5KG
Paint-on airtight, smart vapour control layer
VARA FLUID BRUSH is a water-based smart vapor control coating providing a continuous airtightness over cracks and gaps in both new build and retrofit projects.
M Permeable to water vapour
M Good adhesion on various surfaces
M Ready-to-use, fast application
M Flexible, ensures adequate coverage
M Durable airtight connections
M Brush applied, no need for primer
M LOW VOC polymer based liquid
M Ideal solution for complex details such as doors, windows, corners etc.
Why Partel VARA FLUID BRUSH?
M Internal and external use
M Can be applied both vertically and horizontally
M Wall to floor
M Wall to ceiling
M Wall to timber
M Pipe and ducting penetrations
M General construction joints
Fields of Application
Quantity
UV RESISTANCE 3 MONTHS
SD VAPOR VARIABILITY EN-ISO 12572 0.15-16 @ 0.3MM
USAGE (DEPENDS ON SURFACE) +- 1KG /M2
WATER RESISTANCE EN-1928 W1
PROCESSING TEMPERATURE +5OC
PARTEL.COM
Optimum performance vapour control membrane
WEIGHT EN 1849-2 100
SD- VALUE EN 1931 5
TEMP RESISTANCE -40 °C TO 80 °C
TENSILE STRENGTH EN 12311-2 MD 285 / CD 385
NAIL TEAR RESISTANCE EN 12310-1 MD 260 / CD 246
M Designed to be compatible with all conventional building systems
M Extremely strong
M Elastic and Durable
M Reinforced for optimum strength
M Optimum Sd value for most constructions
M Durable towards UV ageing
M Optimal protection against humidity, ensures drying of the building structure
Why Partel IZOPERM PLUS?
M Internal use
M Suitable for all insulation types
M Roof and timber frame wall
Fields of Application
1.5m X 50m=75m2
59-1/16” X 164’-1/2” = 807 SF3m X 50m=150m2
9’ 10-1/3”” X 164’-1/2” = 1615 SF0.75m X 50m=37.5m2
29-17/32” X 164’-1/2” = 403.5 SF
9
MONO MONO250250
PARTEL.COM
Next generation monolithic membrane
M 3-Ply sarking, roof underlay and wind barrier with Next Generation Monolithic TPE functional layer
M Exoperm Mono membrane transports vapour to outside. The TPE functional layer located in the middle of the product, is vapor open whilst having excellent waterproofing properties
M The Monolithic TPE layer is continuous, free of pores, offering a complete barrier against the passage of water and long term durability for the building
1.5m X 50m=75m2
59-1/16” X 164’-1/2” = 807 SF3m X 50m=150m2
9’ 10-1/3”” X 164’-1/2” = 1615 SF
M Highly breathable membrane (Sd 0.07 m)
M High resistance to penetration of water (W1)
M Ideal Airtightness and vapour transmission
M Excellent ageing resistance due to the Monolithic Technology
M Windtight, Highly diffusion open
M Optimal UV stability
M Helps to avoid structural damage
Why Partel EXOPERM MONO 150?
M External use
M Suitable for all insulation types
M Roof and wall
Fields of Application
CONNECT
MONO MONO
MONO CONNECTMONO
INTEGRATED TAPES ON BOTH SIDES AVAILABLE IN CONNEX VERSION, ENSURES OPTIMUM WINDTIGHTNESS.
11
Why Partel EXOPERM MONO 150?
Monolithic Fire-Resistant Membrane
WEIGHT EN 13859-2 195 G/M² ± 10%
SD-VALUE M EN 13859-2 0.13 M
UV RESISTANCE EN 12311-2 >10 YEARS*
FIRE RESISTANCE DIN 4102 B1
TEMPERATURE RESISTANCE -40°C TO 80°C
1.5m X 50m=75m2 59-1/16” X 164’-1/2” = 807 SF
M Increased Fire Resistance— B1
M Monolithic TPU Technology
M High Level of UV Resistance
M Ideal Airtightness and Vapour transmission
M Long term resistance to driving rain
M Windproof / Diffusion open
M Systematic safety and energy-efficient solution
M 2-Ply sarking, roof underlay and wind barrier with Next Generation Monolithic TPU functional layer
The TPU functional layer is vapor open while creates a complete wind tight, waterproof membrane that actively expels out any water, providing long-lasting UV protection and increased fire resistance.
Why Partel EXOPERM MONO DURO 200?
M External use
M Roof and facade/wall
M Suitable for all insulation types
Fields of Application
*does not apply in the case of open air weathering, but only when clad with a distance of approx. 5 cm and a maximum joint area of 40%
NEW
PARTEL.COM
Next generation monolithic reflective membrane
WEIGHT ISO 536 150 G/M2
SD- VALUE M EN 1931 0.25 M
TENSILE STRENGTH MD/CD EN 12311-2 150/140 N
RESISTANCE TO WATER PENETRATION EN 13111 W1
TEMP RESISTANCE -20ºC TO 80ºC
THERMAL RESISTANCE BS ISO 9869 0.75M2 K/W
1.5m X 50m=75m2
59-1/16” X 164’-1/2” = 807 SF
3m X 50m=150m2
9’ 10-1/3”” X 164’-1/2” = 1615 SF
This Monolithic TPE layer results in a stronger, more flexible membrane with greater resistance to corrosion and abrasion compared to the micro-porous membranes that are prevalent on the market.
M Breathable membrane with low SD value
M 15 times more durable than micro-porous products, due to the monolithic layer
M Water resistant (W1)
M Significant improvement of thermal resistance and insulation properties
M Humidity controlling and insulating properties
M Cost savings
M Windtight
M Longer lasting
M Optimal UV Stability
Why Partel ECHOFOIL EXO?
M External use
M Roof and Wall
Fields of Application
13
Reflective vapour control layer
WEIGHT EN 1849-2 120 G/M2
SD- VALUE M EN 1931 100 M
TEMP RESISTANCE -20ºC TO 80ºC
TENSILE STRENGTH MD/CD EN 12311-2 320 / 280 N
THERMAL RESISTANCE BS ISO 9869 0.75M2 K/W
1.5m X 50m=75m2
59-1/16” X 164’-1/2” = 807 SF
3m X 50m=150m2
9’ 10-1/3”” X 164’-1/2” = 1615 SF
M Lowest emissivity on the market reflecting up to 97%
M Water resistant (W1)
M Damp proofing
M Significant improvement of thermal resistance and insulation properties
M Humidity controlling and insulating
M Cost savings
M Great durability
M Optimal UV Stability
The reflective Vapour Control Layer (VCL) helps to improve the thermal performance of a structure via reflecting up to 97% of the internal heat from inside the structure back into the building. Used in conjunction with Echofoil Exo it increases thermal performance further and helps to lower U values.
Why Partel ECHOFOIL IZO?
M Internal use
M It’s damp proofing properties make it ideal for climate class 4 rooms such as saunas, swimming pools, kitchens and sport facilities
Fields of Application
PARTEL.COM
CAN BE PLASTERED Moisture variable
* Adhesion: Before sticking tapes the surface should be clean and dry, water repelling substances are not suitable for adhesion. Use Primers (Acraprime) on porous or masonry surfaces. Adhesion is assured on all Partel membranes, planed timber, painted timber, plastics and metals. The more suitable the surface for adhesion the better the results, Folds, creases or substrate issues impact on the system . It is the responsibility of the applicator to perform adhesion tests prior to proceeding - where required. It is necessary to apply pressure using Partel ‘Helping Hand’ applicator. Tapes are not designed for tensile strains.
60mm x 25m (2-3/8” x 82’)
80mm x 25m (3-1/8” x 82’)
150mm x 25m (5 7/8” x 82’)
200mm x 25m (7 7/8” x 82’)
Air and windtight sealing tape M High shear strength
M High performance airtight tape
M Resistant to weathering, UV stability
M Lifetime* design - excellent ageing resistance due to the strong acrylic adhesive
M Water resistant adhesive
M Extremely stable
M Environmentally friendly - free of solvents and emulsifiers
M Outdoor exposure up to 3 months
M Easy to use – SL version has split release backing for quick installation
M Airtight connections to DIN 4108-11
Why Partel VARASeal?
M Internal and external use
M Overlaps, Windows, Doors, Corners
Fields of Application
VARASeal VARASeal SL
SL versionDuring application, 2 rear liners can be removed separately to facilitate easy installation.
15
CAN BE PLASTERED Moisture variable
* Adhesion: Before sticking tapes the surface should be clean and dry, water repelling substances are not suitable for adhesion. Use Primers (Acraprime) on porous or masonry surfaces. Adhesion is assured on all Partel membranes, planed timber, painted timber, plastics and metals. The more suitable the surface for adhesion the better the results, Folds, creases or substrate issues impact on the system . It is the responsibility of the applicator to perform adhesion tests prior to proceeding - where required. It is necessary to apply pressure using Partel ‘Helping Hand’ applicator. Tapes are not designed for tensile strains.
100 mm x 25 )(3-7/8” x 82’)
150mm x 25m (5 7/8” x 82’)
SL versionDuring application, 2 rear liners can be removed separately to facilitate easy installation.
Airtight and windtight sealing tape
M High shear strength
M High performance airtight tape
M DOUBLE SIDED ADHESIVE ZONE
M Resistant to weathering, UV stability
M Lifetime* design - permanent ageing resistance due to the strong acrylic adhesive
M Water resistant adhesive
M Easy to use – split release backing for quick installation
M FINGERLIFT - ACCELERATE THE APPLICATION PROCESS
M Extremely stable
M Environmentally friendly - free of solvents and emulsifiers
M Outdoor exposure up to 3 months
M Airtight connections to DIN 4108-11
Why Partel VARASeal X SL?
SL X
M Internal and external use
M Windows, doors, corners
Fields of Application
PARTEL.COM
* Adhesion: Before sticking tapes the surface should be clean and dry, water repelling substances are not suitable for adhesion. Use Primers (Acraprime) on porous or masonry surfaces. Adhesion is assured on all Partel membranes, planed timber, painted timber, plastics and metals. The more suitable the surface for adhesion the better the results, Folds, creases or substrate issues impact on the system . It is the responsibility of the applicator to perform adhesion tests prior to proceeding - where required. It is necessary to apply pressure using Partel ‘Helping Hand’ applicator. Tapes are not designed for tensile strains.
Airtight Joining of vapour control layer
M High performance airtight tape
M Lifetime* design - excellent ageing resistance due to the strong acrylic adhesive
M Water repelling carrier
M Easy to tear by hand
M Extremely stable
M Environmentally friendly - free of solvents and emulsifiers
M Easy to use – SL version has split release backing for quick installation
M Airtight connections to DIN 4108-11
Why Partel CONIZO?
M Internal use
M Windows, doors, roof beams, corners
Fields of Application
SL versionDuring application, 2 rear liners can be removed separately to facilitate easy installation.
60mm x 40m (2-3/8” x 131’3”)
17
* Adhesion: Before sticking tapes the surface should be clean and dry, water repelling substances are not suitable for adhesion. Use Primers (Acraprime) on porous or masonry surfaces. Adhesion is assured on all Partel membranes, planed timber, painted timber, plastics and metals. The more suitable the surface for adhesion the better the results, Folds, creases or substrate issues impact on the system . It is the responsibility of the applicator to perform adhesion tests prior to proceeding - where required. It is necessary to apply pressure using Partel ‘Helping Hand’ applicator. Tapes are not designed for tensile strains.
Airtight seal for injection holes
M High-Performance airtight tape
M Lifetime* design – excellent ageing resistance due to the strong acrylic adhesive
M Extremely stable
M High shear strength
M Water resistant adhesive
M Outdoor exposure up to 3 months
M Airtight connections to Part L and DIN 4108-7
M Lowest VOC rating in hazardous substance test
Why Partel CONIZO PATCH?
160mm x 160mm x 125 units(6-5/16” x 6-5/16” x 125 units)
M Internal use
M Suitable for injection holes
Fields of Application
PARTEL.COM
* Adhesion: Before sticking tapes the surface should be clean and dry, water repelling substances are not suitable for adhesion. Use Primers (Acraprime) on porous or masonry surfaces. Adhesion is assured on all Partel membranes, planed timber, painted timber, plastics and metals. The more suitable the surface for adhesion the better the results, Folds, creases or substrate issues impact on the system . It is the responsibility of the applicator to perform adhesion tests prior to proceeding - where required. It is necessary to apply pressure using Partel ‘Helping Hand’ applicator. Tapes are not designed for tensile strains.
Airtight and Windtight tape M High performance airtight tape
M Lifetime* design - excellent ageing resistance due to the strong acrylic adhesive
M Easy to use – SL version has split release backing for quick installation
M Easy to tear by hand, accelerate the application process
M Water repelling carrier
M Reinforced with elasticity
M Environmentally friendly - free of solvents and emulsifiers
M Airtight connections to DIN 4108-11
Why Partel CONEXO?
M Internal and external use
M Roof, Wall
M Joining of membranes, timber, metals
M Adheres to timber, masonry, concrete, PVC, metal and Partel membranes
Fields of Application SL versionDuring application, 2 rear liners can be removed separately to facilitate easy installation.
60mm x 25m (2-3/8” x 82’)
60mm x 25m (2-3/8” x 82’)
CONEXO CONEXO SL
100mm x 25m (3-7/8” x 82)
19
M High performance airtight tape
M Butyl rubber base tape
M High moisture-repellent – water resistant
M High adhesion and shear strength
M Lifetime flexibility
M Flexible – adapts to most surfaces and angles
M Environmentally friendly - free of solvents and emulsifiers
M Outdoor exposure up to 3 months
M Airtight connections to DIN 4108-11
Why Partel CONLEX BUTYL?
M Internal and external use
M Suitable to form parapets and sills
M Airtight connection
Fields of Application
FLEXIBLE BUTYL TAPE WITH HIGH TACK
200mm x 20m (7 7/8” X 65 6/8”)
50mm x 5m (2’’ x 16’-5’)
CONLEXBUTYL
CONLEXBUTYL
PARTEL.COM
Multi-Functional Tape
M Highly innovative tape
M Provide an excellent thermal, sound, air and rain barrier
M Very easy to use
M Their “moisture-adapting” membranes ensure that the joint can dry out all year
M Can be used in any weather conditions due to the protection layer
M Driving rain & air tight
M Breathable tape
M Excellent thermal and sound insulation
M Very low emissions
M DIN 18542:2009 certified
M Triple-Layer Joint Sealing System ensures tested joint sealing of windows suitable for all kind of buildings including Passive Houses in order to reduce energy costs and provides long-term performance and reliability of the sealed joint
Allows for movements of building components – e.g. linked to temperature changes.
Why Partel CONPRESeal 3V BG1?
M Ideal for an easy and reliable sealing of windows and doors for wood construction, prefabricated construction masonry, framework construction and concrete construction
M After the installation, the polyurethane soft foam expands in the joint and provides a durable joint sealing and an optimal vapour management
Fields of Application
Passive House Compliant Moisture variable
21
Joint Sealing Tape
M Extremely durable, exceeds the requirements for protection against driving rain, airtightness and resistance to weathering according to the highest European standard for joint sealant tapes DIN 18542:2009
M Driving rain & air tight (Resistant to driving rain)
M Breathable tape
M Excellent thermal and sound insulation
M Windproof
M Very low emissions
M 15 years function guarantee (tested and certified for a field installation after 15 years in service)
Available in various dimensions. Typical tape joint dimensions are e. g. 1/4 -1/2” and 3/8 - 5/8”.
Why Partel CONPRESeal BG1?
M Ideal for an easy and reliable sealing of windows and doors for wood construction, prefabricated construction masonry, framework construction and concrete construction
M BG1 is also suitable to seal facade joints made of brick, concrete, ACM panels and curtain wall
Fields of Application
ASTM Tested Hurricane Tested
CONPREBG1
CONPREBG1
PARTEL.COM
almaTHERM
EXCELLENT MECHANICAL
STRENGTH
EFFICIENTTHERMAL
BREAK
HIGH COMPRESSIVE
STRENGTH
ALMA THERM IS A PET-BASED PRODUCT
25 X 1.5 L PET BOTTLES PRODUCE 4.5 X 35 X 35CM ALMA THERM RAW BOARD
23
ALMA THERM IS A PET-BASED PRODUCT
100% Recycled PANELfor Hi-PerformanceStructural Insulation
Partel ALMA THERM is a PET-based panel, the NEW sustainable alternative to conventional construction materials for reducing thermal bridges.
Owing to its versatility, being lighter, more compact and with a lower thermal conductivity, this green solution is designed to improve the energy efficiency of the building.
M Efficient thermal break
M Excellent mechanical strength
M High compressive strength
M Low water absorption
M Permeable to water vapor diffusion
M Excellent thermal conductivity / R-value
M Environmentally-friendly core material
(100% recyclable)
M Lightweight and cost-effective composite structure
Why Partel ALMA THERM? M Internal and external use
M Thermal separation
M Doors
M Windows
M 115 kg/m³
M 180 kg/m³
1218 x 1005 x 50mm (4’ x 3’ 4’’ x 2’’)1218 x 1005 x 75mm (4’ x 3’ 4’’ x 3’’)BESPOKE SIZES UPON REQUEST
Fields of Application
Raw Density
NEW
PROPERTIES 115 180 UNIT STANDARD
COMPRESSIVE STRENGTH 1.5 3.2 N/mm2 EN 826
E-MODULUS COMPRESSION 67 118 N/mm2 EN 826
THERMAL CONDUCTIVITY 0.036 0.043 W/ (m . K) EN 12667
WATER VAPOUR DIFFUSION 16.8 38.3 Sd EN 12086
PARTEL.COM
150*150 Packs of 5 for hole sizes 6-10mm (5/16’’x5/16” for hole size1/4” to 3/8”)
150*150 Packs of 5 for hole sizes 15-30mm (5/16’’x5/16” for hole size9/16” to 1 3/16”)
180*180 Packs of 2 for hole sizes 50-90mm 5/16’’x5/16” for hole size2” to 3 3/4)
* Adhesion: Before sticking tapes the surface should be clean and dry, water repelling substances are not suitable for adhesion. Use Primers (Acraprime) on porous or masonry surfaces. Adhesion is assured on all Partel membranes, planed timber, painted timber, plastics and metals. The more suitable the surface for adhesion the better the results, Folds, creases or substrate issues impact on the system . It is the responsibility of the applicator to perform adhesion tests prior to proceeding - where required. It is necessary to apply pressure using Partel ‘Helping Hand’ applicator. Tapes are not designed for tensile strains.
Sealing Grommit
M Manufactured from flexible high quality modified butyl with acrylic adhesive
M Fast and accurate airtight sealing of penetrations
M Temperature resistance - 40°C to 150°C
M Extremely flexible – Moulds to shape of pipe or cable
M Extremely stable and hermetically
M Water resistant
M Lifetime* design - permanent ageing resistance due to the strong acrylic adhesive
M Environmentally friendly - free of solvents and emulsifiers
M Airtight connections to DIN 4108-11
Why Partel KABSEAL?
M Internal and external use
M Ideal option to seal cable and pipe penetration
Fields of Application
Other dimensions
available on request
25
Liquid adhesive for airtight connections
M Free of solvents - environmentally friendly
M High adhesion to most surfaces
M Durable flexible
M Ageing resistant
M Airtight connections to DIN 4108-11
M Store and transport frost free
M Odourless
Why Partel ACRABOND?
Fields of Application
Contents:310ml & 600ml
M Indoor usage for airtight connections of airtight membranes including Partel Vara and Izoperm to DIN 4108
M Suitable for plaster, untreated wood, concrete, stone, moisture and vapour barriers
M Surfaces must be clean, dry and free of dust and grease
M One surface must always be absorbent
M Not suitable for Sauna and swimming pool
PARTEL.COM
9/25Mm wide.3.75Mm deep.8M long.(1”/3/8” Wide, 26’3”long)
Roll Adhesive for airtight connections
M High performance adhesive with consistent thickness
M Designed life 100 years* - permanent
M Free of solvents, VOCs - environmentally friendly
M Immediate adhesive strength – no drying time necessary
M High shear strength
M Can be repositioned
M Ageing resistant and permanently flexible
M Adhesion to DIN 4108-11 N/25 mm
*Refer to warranty data and processing sheets for complete details.
Why Partel ACRALINE?
M Internal use
M Bonds to concrete, masonry, wood, Plasterboards etc.
M Application temperature: -10°c to + 80°’c (14f°- 176f°)
Fields of Application
* Adhesion: Before sticking tapes the surface should be clean and dry, water repelling substances are not suitable for adhesion. Use Primers (Acraprime) on porous or masonry surfaces. Adhesion is assured on all Partel membranes, planed timber, painted timber, plastics and metals. The more suitable the surface for adhesion the better the results, Folds, creases or substrate issues impact on the system . It is the responsibility of the applicator to perform adhesion tests prior to proceeding - where required. It is necessary to apply pressure using Partel ‘Helping Hand’ applicator. Tapes are not designed for tensile strains.
ROLL
27
ACRAPRIME LIQUID
Acrylic primer for pre-treatment of porous surfaces
M Free of solvents
M Quick drying = time saving
M Creates strong adhesion for better results
M Can be used with all Partel tapes and adhesives
Why Partel ACRAPRIME?
M Internal and external use
M ACRAPRIME is used as a primer for porous surfaces like wooden fibreboards, concrete or masonry
M Apply Acraprime with a paint brush and allow to dry for 10-30 minutes (depending on temperature). Apply Partel tapes or adhesive products afterwards using some pressure
Fields of Application
Contents:1000ml
STORAGE STABILITY 2 YEARS
PROCESSING TEMPERATURE -40°C TO +90°C (-40°F - +194°F)
MATERIALPRIMER DISPERSION BASED ON POLYACRYLATE
PARTEL.COM
SPRAY PRIMER FOR PRE-TREATMENT OF POROUS SURFACES
M Sprayable primer – fast and easy to apply
M Makes overhead and vertical work easier
M 3-position spray head: Low, Medium and High. It is possible to regulate the spray volume
M Short drying time
M Very low odour
M Creates strong adhesion for better results
M High initial tack, suitable for use in difficult conditions (cold, damp)
M Can be used with all Partel tapes and adhesives
Why Partel ACRAPRIME SPRAY?
M External & Internal use
M ACRAPRIME SPRAY is used as a primer for porous surfaces like concrete, plaster, masonry, wood, fibre board and other building materials
M Apply ACRAPRIME SPRAY vertically. Chose the nozzle regulation and spray on the substrates at a distance of 20 cm
Fields of Application
COLOUR LIGHT YELLOW
BASE MATERIAL SYNTHETIC MIX AND RESINS IN SOLVENT
PROCESSING TEMPERATURE PRIMER
FROM -5°C
NEW
Contents:500ml
29
100mm X 80mm X 2mm
HAND Professional tape pressure applicator
M Extremely durable and flexible
M Consistent and prevents creases
M Windproof and rainproof
M Tapered edges for easy application of Partel tapes
M Protect your hands from getting sore and/or hot while rubbing down long stretches of tape
M Can be used also on small difficult surfaces like corners
Why Partel HELPING HAND?
NEW
PARTEL.COM
PRODUCTS OVERVIEW
NEXT GENERATION MONOLITHIC MEMBRANE
M Wind proof but diffusion open
M Available with integrated tapes on both sides
NAIL SEALING TAPE TO SEALBETWEEN BATTENS ANDEXOPERM
M Prevents water ingress during construction and afterwards
NEXT GENERATION MONOLITHIC REFLECTIVE MEMBRANE
M Humidity controlling
M insulating and Breathable membrane
FLEXIBLE BUTYL TAPEWITH HIGH TACK
M Easy to install
M Elastic and durable
MULTIPURPOSE AIRTIGHTADHESIVE
M Solvent free
M Durable and flexible
SPRAY PRIMER FOR PRE-TREATMENT OF POROUS SURFACES
M Fast and easy to spray
M Permanently tacky
INTERIOR WINDOWINSTALATION TAPE
M High performance airtight tape
M Split release backing
OPTIMUM AIRTIGHT AND VAPOUR CONTROL MEMBRANE
M High performance airtightness
M Reinforced for optimum strength
INTERIOR AND EXTERIOR AIRTIGHT TAPE
M Reinforced with elasticity
M Split release backing
ASSISTS WITH PRESSURE APPLICATION OF TAPES
HELPINGHAND
MONO MONO150150
MULTI-FUNCTIONAL TAPE
M Excellent thermal, sound, air and rain barrier
CONLEXBUTYL
CONLEXBUTYL
FIRE RESISTANT MONOLITHIC MEMBRANE
M Increased Fire Resistance — B1
M High Level of UV Resistance
31
FLEXIBLE, AIRTIGHT,SMART VAPOURCONTROL LAYER
M Fluid applied membrane
M Vapour permeable layer
NEXT GENERATION MONOLITHIC MEMBRANE
M Wind proof but diffusion open
M Available with integrated tapes on both sides
RECYCLED PANEL FOR STRUCTURAL INSULATION
M Excellent thermal conductivity
M Highly efficient thermal break
FLEXIBLE BUTYL TAPEWITH HIGH TACK
M Easy to install
M Elastic and durable
MULTIPURPOSE AIRTIGHTADHESIVE
M Solvent free
M Durable and flexible
PRIMER FOR POROUS SURFACES
M Quick drying
M Workable on cold surfaces
INTERIOR AND EXTERIORWINDOW TAPE
M Moisture variable
M Plasterable window
INTERIOR WINDOWINSTALATION TAPE
M High performance airtight tape
M Split release backing
OPTIMUM AIRTIGHT AND VAPOUR CONTROL MEMBRANE
M High performance airtightness
M Reinforced for optimum strength
MOISTURE VARIABLE AIRTIGHT MEMBRANE
M Variable range ensures optimum drying conditions
M Reinforced for optimum strength
INTERIOR AND EXTERIOR AIRTIGHT TAPE
M Reinforced with elasticity
M Split release backing
ACRAPRIME LIQUID
JOINT SEALING TAPE
M Excellent sound and thermal insulation
CONPREBG1
CONPREBG1
CONLEXBUTYL
CONLEXBUTYL
MONO MONO150150
FLUID FLUID
FLUID FLUID
� No need for primer
FLEXIBLE, airtight,smart vapour control layer
� PERMEABLE TO WATER VAPOUR
� GOOD ADHESION ON DIFFERENT SURFACES
� READY-TO-USE, FAST APPLICATION
� FLEXIBLE, ENSURES ADEQUATE COVERAGE
� IDEAL FOR DURABLE BUILDING CONNECTIONS
partel.com
wall to floor /
wall to ceiling /
WALL TO TIMBER /
general construction joints
Internal & External Use
10KG
almaTHERM
PRODUCED BY: PARTELCLAREGALWAY CORPORATE PARK,CLAREGALWAY, CO. GALWAY,IRELAND. H91 R85P TEL: 0818 33 33 55
[email protected]: 888 487 1012
[email protected]: 02037 401918
[email protected]: 0818 33 33 55
FOLLOW US ONTWITTER | FACEBOOK | INSTAGRAM | LINKEDIN