SAFETY COURSES
Course /event title (to appear on the accreditation certificate)
Incident Investigation (Level 2)
Modules /topics (outline only) Principles of the act,
Definitions and an understanding of the specific requirements pertaining to continuous hazard identification and risk assessment.
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 120335 NQF Level: 03
Course /event title (to appear on the accreditation certificate)
Hazard Identification and Risk Assessment (H.I.R.A) (Level 3)
Modules /topics (outline only) Safety
Workplace inspections Principles of the act.
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 120330 NQF Level: 03
Course /event title (to appear on the accreditation certificate)
Occupational Health and Safety Act (OHSA)
Modules /topics (outline only) Legal knowledge and duties Responsibilities of the Safety Officer Incident and accident prevention Philosophy of accidents Management systems Hazard identification analysis and risk assessment.
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 242668 NQF Level: 04
Course /event title (to appear on the accreditation certificate)
General Health and Safety
Modules /topics (outline only) Legal knowledge Legislation Personal health and safety equipment Reporting of incidents Notices and signs Emergency procedures
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 259639 NQF Level: 02
Course /event title (to appear on the accreditation certificate)
LAWREG
Modules /topics (outline only) O.H.S Act in terms of its development principle and rights General Administrative Regulations Incident Reporting and Documentation General Safety Regulations Environmental Regulations General Machinery Regulations Electrical Machinery and Installations Driven Machinery Regulations
Facilities Regulations Vessels Under Pressure Regulations Hazardous Chemical Regulations
Duration 1 Week NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 259639 NQF Level: 02
Course /event title (to appear on the accreditation certificate)
Legal Liability
Modules /topics (outline only) Common Law and Legislation Criminal Liability Principles of the O.H.S Act, 1993
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 242661 NQF Level: 04
Course /event title (to appear on the accreditation certificate)
Stacking & Storage Regulations
Modules /topics (outline only) Stacking and Warehouse Requirements Pallet Construction and Loading Stacking and Storage of Freight Supporting Clauses Stacking and Storage Standard General Safety Regulation
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 119044 NQF Level: 02
Course /event title (to appear on the accreditation certificate)
Confined Spaces
Modules /topics (outline only) defining a confined space confined space hazards Permit-Required Confined Space understanding why work in such a space maintain air quality and prevent fire explosions
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 15034 NQF Level: 02
Course /event title (to appear on the accreditation certificate)
Supervisory Safety
Modules /topics (outline only) safe systems at work hazard identification and risk assessment duties of a supervisor and intervention skills understanding of Health, Safety Welfare and Environmental issues legal requirements
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 262884 NQF Level: 04
Course /event title (to appear on the accreditation certificate)
Hand Tools
Modules /topics (outline only) Tool safety Carrying & Using hand tools Cutting & Scraping tools Hand tool care, Maintenance & storage
Fastening Tools Select and use appropriate hand tools and equipment
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 119744 NQF Level: 02
Course /event title (to appear on the accreditation certificate)
Scaffolding Erector
Modules /topics (outline only) Design Compliance and Roles Responsibilities of both scaffolding inspectors and erectors
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 263245 NQF Level: 03
Course /event title (to appear on the accreditation certificate)
Scaffolding Inspector
Modules /topics (outline only) Design Compliance and Roles Responsibilities of both scaffolding inspectors and erectors
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 263205 NQF Level:04
Course /event title (to appear on the accreditation certificate)
Basic Fire Fighting (Fire Marshal)
Modules /topics (outline only) Role of a fire marshal Liaison with the fire service Action to be taken upon discovery of a fire Aspects such as the chemistry of a fire. Implementing fire drills Evacuations Correct use of a fire extinguisher
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 252250 NQF Level: 01
Course /event title (to appear on the accreditation certificate)
Basic Fire Fighting (Level 2)
Modules /topics (outline only) triangle of combustion tetrahedron of combustion means of spreading identification and use of water supplies properties of water and fire hydrants
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 12484 NQF Level: 01
Course /event title (to appear on the accreditation certificate)
Dangerous Goods Handling
Modules /topics (outline only) Legislation to health risks How to properly handle dangerous goods
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 8020 NQF Level: 04
Course /event title (to appear on the accreditation certificate)
Perform Basic Rigging Procedures
Modules /topics (outline only) steel wire slings chain slings polyester slings shackles eye bolts
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 14706 NQF Level: 02
Course /event title (to appear on the accreditation certificate)
Advance SAMTRAC
Modules /topics (outline only) The SHEQ management system. Applied operational process mapping for the SHEQ management system. Improving the effectiveness and efficiency of the SHEQ management system. Implementing the SHEQ management system as an operational plan. HSE ethics in the SHEQ management system. Workplace risk assessment and control in an effective SHEQ management system. Individual assignment – Design a SHEQ management system for your company.
Duration 1 Week NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 244283 NQF Level: 05
Course /event title (to appear on the accreditation certificate)
ROOT CAUSE ANALYSIS TRAINING
Modules /topics (outline only) Understand complex problems Finding & Evidence Review Models to help understanding findings / problems Recommended Root Causes Classification Table Finding Root Causes Failure Mode & Effects Analysis (FMEA) Developing & Implementing (CAR & CAP) Tracking a Corrective Action Validating a Corrective Action
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 242902 NQF Level: 04
Course /event title (to appear on the accreditation certificate)
SAMTRAC CONSTRUCTION
Modules /topics (outline only) The foundations of CHS management. Health and safety management plans for construction projects. The role of CHS in tender submissions and cost estimations. Establishing the fundamentals of construction health and safety organisation. Establishing effective health and safety consultation, co-operation and promotion. Sub-contractor health and safety compliance risk. Employee wellness in the construction work environment. Hazard identification and risk assessment programmes and controls. Site or camp-establishment risk.
Duration 2 Weeks NQF level and Unit Standard (US) Unit Standard: 9964
number if registered or aligned with SAQA
NQF Level: 02
Course /event title (to appear on the accreditation certificate)
Safety Officer 2
Modules /topics (outline only) MHSA (Mine Health & Safety Act) Legislation The Auditing Process Safety in Welding Due Diligence Critical Task Inventory Critical Task Analysis Behaviour Based Safety Hazardous Chemical Substances Mobile Machinery Hazards & Control Meetings Explosive Safety Programme Evaluations Occupational Health and Hygiene Emergency Preparedness Ventilation Communications
Duration 2 Weeks NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 74269 NQF Level: 02
Course /event title (to appear on the accreditation certificate)
Safety Officer 3
Modules /topics (outline only) Health and Safety Features Premises and Housekeeping Portable Power Tools Symbolic Safety Signs Confined Spaces Lifting Equipment Pressure Vessels Electrical Safety Ladder Safety Labeling Lockout Systems OSHACT Fire Prevention II Vibration SHE System Scaffolds Safe Guarding Thermal Stress Ventilation II Gas Cylinders Managing PPE
Duration NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 244288 NQF Level: 05
Course /event title (to appear on the accreditation certificate)
OSHAS 18001
Modules /topics (outline only) 18001 Specifications Occupational Health and Safety Management Systems Declaration of conformances OSHAS 18002 Guidelines Occupational Health and Safety Policies Health and Safety Acts
Audit Protocols Corporate Governance Requirements Risk Assessment Process Management Programs Implementation and Operation Operation Control Document Management Training, Awareness and Competence Corrective Action Management Review Accidents, Incidents, Non-Conformances Emergency Preparedness and Response Audits
Duration 2 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 263377 NQF Level: 05
Course /event title (to appear on the accreditation certificate)
Auditors
Modules /topics (outline only) Auditing Techniques Course Objectives Causes and Consequences of Incidents Managing Risk Exposures Measuring and Monitoring Risk Control Introduction to Environmental Management Introduction to Quality Management Preparing for the Audit Auditor Demeanour and Skills Interviewing Techniques Closing Meetings Post Audit Activities
Duration 2 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 263400 NQF Level: 05
Course /event title (to appear on the accreditation certificate)
Strata Control
Modules /topics (outline only) Basic Rock Engineering Definitions Stress Fractures in mining Blast Fractures Development Support Installation Stope Support Legislative Requirements Treatment of Joints Treatment of Faults Treatment of Dykes Treatment of Bad Hanging Effects of Stress in Mining Creating Safer Conditions
Duration 1 Week NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 254588 NQF Level: 03
Course /event title (to appear on the accreditation certificate)
ICAM (Incident Cause Analysis Method)
Modules /topics (outline only) Legislative Requirements Terminology The ICAM System Effective Implementation of ICAM System
Identifying Causes Taking Preventative/ Remedial Actions Completing ICAM Documents
Duration 1 Week NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 256895 NQF Level: 04
Course /event title (to appear on the accreditation certificate)
Legal Responsibility
Modules /topics (outline only) Health and Safety Act Understanding and Interpreting the MHSA MHSA Sect 2,5,10,11,22,23 Requirements Legal appointments – MHSA and Min Act Regulations Understanding Due diligence Duties and Responsibility Hazard Identification Basic Risk Management
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 242661 NQF Level: 04
Course /event title (to appear on the accreditation certificate)
Safety For Supervisors
Modules /topics (outline only) Health and Safety Act Understanding and Interpreting the MHSA MHSA Sect 2,5,10,11,22,23 Requirements Legal appointments – MHSA and Min Act Regulations Accident and incident investigation techniques MHSA sect 11.5 Requirements MHSA Reg. Chapter 23 Requirements Enquiries Mine specific forms Effective Task Observation Methods and techniques Coaching and training methods Evaluation of Skills Training Mine specific forms Effective Planned inspection skills- Methods and techniques Mine specific forms Effective Hazard identification- Methods and techniques Identification skills Effective Risk Assessment Risk Analysis Risk Ranking Control Techniques Remedial action implementation and follow up Risk matrix (Mine specific MHSA Sect 11 Requirements Report Writing Effective report writing and report distribution Risk Analysis Risk Ranking Control Techniques
Duration 3 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 262884 NQF Level: 04
Course /event title (to appear on the accreditation certificate)
SHE Practitioner
Modules /topics (outline only) Monitor, report and make recommendations pertaining to specified requirements in terms of working at heights Demonstrate knowledge pertaining to the preparation, conducting, recording and follow-up actions of a planned task observation in a working place Verify compliance to safety, health and environmental requirements in the workplace Monitor and make recommendations on the application of health and safety principles regarding hazardous substances in the working place Participate in the establishment, implementation and monitoring of a health and safety agreement Apply knowledge of statistics and probability to critically interrogate and effectively communicate findings on life related problems Participate in the implementation and evaluation of a safety and health management programme in the workplace Take action to address impacts on the environment Apply environmental management tools to assess impacts Conduct an investigation into workplace safety, health and environmental incidents
Duration 2 Weeks NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 49256 NQF Level 04
Course /event title (to appear on the accreditation certificate)
COID Act Overview (Workmen’s Compensation)
Modules /topics (outline only) The purpose of the Compensation for Occupational Injuries and Diseases Act The Responsibilities of an Employer The Responsibilities of an Employee The Responsibilities of Mandators and Contractors How to Define an Occupational Injury or Disease Payments of Assessments to Accident How and when to report an Accident or Disease Processing the First, Progress & Final Medical reports Processing Resumption and other reports
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 117155 NQF Level 04
Course /event title (to appear on the accreditation certificate)
Construction Health & Safety File
Modules /topics (outline only) Documented plan Risk assessment templates with examples Written safe work practices template with examples Templates for all safety registers required by contractors Fall protection plan Safety file layout Templates for all legal appointment letters required by the Regulations
Duration 2 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 243753 NQF Level 03
Course /event title (to appear on the accreditation certificate)
Flagman Training
Modules /topics (outline only) Identify risks to health and safety at roadwork’s Prepare for a site for road works Select the correct PPE for flag person operations
Select and display the correct temporary signage Demonstrate the correct flagging signals to control traffic Using vehicles to convey employees / equipment to and from work Code of conduct for flag persons
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 258923 NQF Level: 02
Course /event title (to appear on the accreditation certificate)
Emergency Planning
Modules /topics (outline only) Emergency Management Considerations Direction and control The emergency coordinator The emergency operations Centre (EOC) Emergency equipment First aid First aid facilities The first aid department The first aid room First aid kits Issuing of medication Emergency first aid equipment First aid personnel First aid training Organization and records Types of emergencies Fire and explosion Planning considerations General requirements for workplaces Training of key personnel Protective equipment Fire team organization Other emergency teams Training of fire teams Fire drills and emergency evacuations Emergency exit routes Fire alarm procedures Informing the fire brigade Evacuation plan Fire drill training
Duration 2 Weeks NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 259597 NQF Level: 02
Course /event title (to appear on the accreditation certificate)
Ladder Safety
Modules /topics (outline only) General Safety Regulations [Section 13A – Ladders) Purchasing of ladders Non-slip bases and safety tops Inspection and maintenance Use of ladders Ascending and descending ladders Other safe practices Electrical hazards and metal hazards Examples of unsafe practices involving ladders Ladder inspection checklist
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 120362 NQF Level: 03
Course /event title (to appear on the accreditation certificate)
Workplace Trainer
Modules /topics (outline only) Organizational Development Education and Training in context The HRD Process Competency Based Training The Role of the Trainer Training Needs Analysis Designing, Preparing and Delivering Training Evaluation of Training Training Management Skills Practice
Duration 2 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 97154 NQF Level: 04
Course /event title (to appear on the accreditation certificate)
Manual Handling
Modules /topics (outline only) Identifying causes of accidents Developing preventative measures Work skills and tasks analysis to identify and rectify improper techniques Understanding the anatomy of the spine and how it functions Understanding the mechanisms of back pain
Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 119568 NQF Level: 01
MACHINERY COURSE
Course /event title (to appear on the accreditation certificate)
Bull Dozer
Modules /topics (outline only) Introduction to the Machine Load Charts General, Safety Procedures Battery Care Faulty Finding Daily inspection checklist Bucket Level Techniques Hazardous Labels Principles of Balance
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 262729 NQF Level: 02 Credits: 15
Course /event title (to appear on the accreditation certificate)
Drill Rig
Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Preparation For Operation Operator’s Compartment Parking Procedure Pre-Start Inspection Checklist Park Brake Test Drilling Compartment Drilling Procedure
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with
Unit Standard: 257026 NQF Level: 03
SAQA Credits: 15
Course /event title (to appear on the accreditation certificate)
Articulated Dump Truck
Modules /topics (outline only) Introduction to the Machine Park Brake Testing General, Safety Procedures Parking Procedure Trouble Shooting Dumping Procedure Pre-Start Inspection Checklist Preparation For Operation Operator’s Compartment Principles of Balance
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 262731 NQF Level: 02 Credits: 10
Course /event title (to appear on the accreditation certificate)
Excavator
Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Park Brake Test Operator’s Compartment Parking Procedure Pre-Start Inspection Checklist Preparation for Operation Loading Procedure Excavating Procedure
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 262744 NQF Level: 02 Credits: 15
Course /event title (to appear on the accreditation certificate)
Counterbalanced Lift Truck (F1A, F2A, F3A, F4A)
Modules /topics (outline only) Introduction to the Machine Load Charts General, Safety Procedures Battery Care Faulty Finding Stacking Rules Daily Inspection Checklist Fork Level Techniques Hazardous Labels Principles of Balance
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 242974 NQF Level: 03 Credits: 07
Course /event title (to appear on the accreditation certificate)
Front End Loader
Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Park Brake Test Preparation For Operation Parking Procedure Pre-Start Inspection Checklist Bucket Level Techniques
Operator’s Compartment Loading Procedure
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 262747 NQF Level: 02 Credits: 12
Course /event title (to appear on the accreditation certificate)
Grader
Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Brake Testing Procedure Preparation for Operation Grading Procedure Daily Inspection Checklist Blade Level Techniques Operators Compartment Parking Procedure
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 262735 NQF Level: 02 Credits: 15
Course /event title (to appear on the accreditation certificate)
Load Haul Dumper
Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Preparation For Operation Operator’s Compartment Parking Procedure Daily inspection checklist Park Brake Test Dumping Compartment Load & Dumping Procedure
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 244476 NQF Level: 02 Credits: 04
Course /event title (to appear on the accreditation certificate)
Mobile Crane
Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Preparation For Operation Operator’s Compartment Park Brake Test Pre-Start Inspection Checklist Parking Procedure Lifting Procedure Lifting Compartment
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 116254 NQF Level: 02 Credits: 20
Course /event title (to appear on the accreditation certificate)
Overhead Crane
Modules /topics (outline only) Introduction to the Machine Load Charts General, Safety Procedures
Battery Care Faulty Finding Stacking Rules Daily inspection checklist Boom Level Techniques Hand Signals Principles of Balance
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 242976 NQF Level: 02 Credits: 05
Course /event title (to appear on the accreditation certificate)
Rock Drill Operator
Modules /topics (outline only) Introduction to the Machine Preparation For Operation General, Safety Procedures Attaching The Pusher Leg Fitting And Assembling Parts Of The Drilling Machine Drilling Procedure Controls Operating Thrust/Pusher Leg First Time Operation
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 244415 NQF Level: 02 Credits: 04
Course /event title (to appear on the accreditation certificate)
Roller Compactor
Modules /topics (outline only) Introduction To The Machine Trouble Shooting General, Safety Procedures Park Brake Test Preparation For Operation Parking Procedure Pre-Inspection Checklist Roller Level Techniques Operators Compartment Compacting Procedure
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 262805 NQF Level: 02 Credits: 05
Course /event title (to appear on the accreditation certificate)
Telescopic Boom Handler
Modules /topics (outline only) Introduction to the Machine Park Brake Test General, Safety Procedures Battery Care Faulty Finding Stacking Rules Daily inspection Checklist Boom Level Techniques Hazardous Labels Principles of Balance
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 244372 NQF Level: 03 Credits: 10
Course /event title (to appear on the accreditation certificate)
Tractor Loader Backhoe
Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Park Brake Test Preparation for Operation Excavating Compartment Daily inspection checklist Bucket Level Techniques Operators Compartment Loading Compartment
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 257076 NQF Level: 03 Credits: 26
Course /event title (to appear on the accreditation certificate)
Tower Crane
Modules /topics (outline only) Introduction to the Machine Changing Speed Ranges Layout of Controls Brakes And Hand Signals Servicing And Ordering Parts Suspension And Steering Travelling Procedures Lighting And Other Switches Starting And Stopping The Engine Crane Operation Procedure
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 116255 NQF Level: 02 Credits: 20
Course /event title (to appear on the accreditation certificate)
Utility Vehicle
Modules /topics (outline only) Introduction to the Machine Load Charts General, Safety Procedures Battery Care Faulty Finding Stacking Rules Daily inspection checklist Level Techniques Hazardous Labels Principles of Balance
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 244452 NQF Level: 02 Credits: 02
Course /event title (to appear on the accreditation certificate)
Winch Operator
Modules /topics (outline only) Installing A Sling Eyebolt Scraping Procedure General, Safety Procedures Preparation For Operation Installing A Temporary Return Leg Attaching The Pusher Legs Installing A Centre Gully Scraper Installing Signaling System Rig Up A Face Scraper First Time Operation
Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 244360 NQF Level: 02 Credits: 04
ENGINEERING COURSES
Course /event title (to appear on the accreditation certificate)
Air Conditioning
Modules /topics (outline only) • Introduction safety and P.P.E • The four major function • Understanding heat • Change of state • Pressure & temperature relationship • The Ozone Layer • R134a properties • Principles of air conditioning • Expansion block valve system • Parallel flow condenser system • Orifice tube system • Expansion valve dual system • Compressors • Clutches • Lubrication • Condensers • Foam seals • Condenser electric fans • Evaporators • Thermal expansion valve • Super heat • Orifice tube • Filter drier receiver • Accumulators • “O” rings • Hoses • Charging ports • Wiring • A/C systems • Blower speed control • Compressor cycling control • Protective sensors • Temperature control • Mode control • Electronic temperature control (ECC) • Recovery & Recycling equipment • Evacuation equipment • Charging stations • Combination units & Refrigerant safety • Leak detections & detectors
Duration 90 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 58720 NQF Level: 03 Credits: 138
Course /event title (to appear on the accreditation certificate)
Boiler Maker
Modules /topics (outline only) • Introduction To Safety & Personal Protection Equipment • Safety Theory and Hand Tools Theory. • Heavy Duty Machines Theory • Acetylene Cutting Equipment Theory and Practical. • Co2 Welding Theory and Practical • Engineering Drawings Theory and Practical. • Drawing Abbreviations.
• Comprehensive Theory Tests. • Arc Welding and Plasma Cutting. • Basic Arc Rod Welding (Tack Welding). • Operating Settings On Inverter Arc Welder Machine. • Plasma Cutting Torch Operation. • Operating Settings On Plasma Cutting Machine. • Guillotine Machine Operation. • Plate Rolling Machine Operation. • Cut Off Grinder Operation. • Acetylene Cutting Torch Operation. • Portable Grinders Large and Small Operation. • Draw Geometric and Mark Off Fabrication Projects. • Basic Hand Saw Uses. • Drilling Machine Operation. • Pedestal Grinder Operation.
Duration 120 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 57820 NQF Level: 03 Credits: 138
Course /event title (to appear on the accreditation certificate)
Carpentry
Modules /topics (outline only) Identification Of Unsafe Working Condition Introduction To Safety Hazardous Waste Use Of Power Tools Mold Hand Tools Operation Leader Safety Use Of Scaffolds Personal Protection
Duration 60 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 262712 NQF Level: 02 Credits: 08
Course /event title (to appear on the accreditation certificate)
CCTV Camera Installation
Modules /topics (outline only) • Measuring Resistance and Distribution Board Wiring • Selecting Conductors and Cables • Testing Low Tension Cables • Fit a Compression Glands • Fit a Gland and Tool Hunting Practical • Join a Low Tension Cable • Wire a Panel and Electrical Motor Drawings • Explain Single-Phase Transformers • Explain Three-Phase Transformers • Explain Delta and Star Connection • Explain single phase Earth Leakage Protection Circuit • Explain Three phase Earth Leakage Protection Circuit • Safe Work Practices • Convert Units & Prefixes • Electromagnetism • Analyze Electrical Units • Identifying Lighting and Lighting Circuit • Explain Single Phase Power Supplies • Explain Three Phase Power Supplies • Fuses and Breakers for Various Application • Read Energy Meters • Using Electrical Testing Meters
Duration 30 Days
NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 58697 NQF Level: 04 Credits: 136
Course /event title (to appear on the accreditation certificate)
Diesel Mechanic
Modules /topics (outline only) • Introduction To Safety & Personal Protection Equipment. • Safety Theory and Hand Tools Theory. • Heavy Duty Machines Theory. • Motor Industry Generic Training: Locking Devices. • Early Fuel Injection Systems. • Assess and Repair Heavy Duty Vehicle (HDV), Steering and Suspension. • Mechanical and Electrical Injection • Comprehensive Theory Tests. • Injection Types: Indirect , Direct, Unit Direct and Common Rail Injection • Safety and Personal Protective Equipment • Cold Weather Starting Procedure • Remove, Assess, Recondition and Replace Cylinder Heads. • Identifying, Removing and Repairing Bushes and Bearings. • Understanding the Fundamentals of Lubrication. • Removing, Assessing and Replacing Cooling System Components. • Care and Use of Trade Tools. • Understanding Basic Electronics.
Duration 120 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 78525 NQF Level: 04 Credits: 159
Course /event title (to appear on the accreditation certificate)
Plumbing
Modules /topics (outline only) • House Keeping: Introduction To Safety & Personal Protection Equipment. • Safety Theory, Hand Tools Theory And Practicals. • Water Systems Pipe Layout, Fittings And Jointing. • Sanitary, Drainage And On-Site Domestic Water Management Systems. • Mechanical Services, Trench Support And Roof Drainage Gutters. • Sanitary Ware Appliances Installations, Plan Preparations And Reading. • Fascias, Gutters And Irrigation Systems. • Solar Water Heating Installation And Maintenance. • Fault Finding And Repairs. • Fire Hydrant And Hose Reel With Or Without Pump. • Installation And Use Of Flexi Hose And Crimping. • Installation And Testing: Gas Pipe, Appliances And Cylinder Installations. • Install And Maintain Soil, Waste And Vent Pipes Systems. • Fabricate And Install Sheet Metal Components. • Manage Time Productively And Self Development • Care And Use Of Trade Tools And Hand Tools. • Understanding Basic Electronics. • Draining Excavation. • Timbering And/Or Shoring. • Taking Levels – Drain Laying And Pipe Laying. • Fitting And Fixing Junctions, Bends And Traps. • Construction On Manholes And Inspection Chambers. • Septic Tanks And Filter Installations. • Construction Of Absorption Trenches And Transpiration Trenches. • Maintain On – Site Sewerage Facilities.
• Maintain On – Site Treatment Plant Installation Work. • Install Hot And Cold Water Service. • Install Backflow Prevention Device. • Adjust A Range Of Values, Flushing And Mechanical Devices For Correct Flow And Operation. • Install Potable Water Storage Systems. • Install Water Treatment. • Install Discharge Pipes For Sanity Plumbing Installation. • Fabricate And Install Soil And Waste Stacks. • Install And Fit Off Sanitary Fixtures. • Installation And Use Of Class 1 And Class 2 Copper Pipe And Connections. • Understanding And Explaining The Need For A Sleeve On Piping. • Understanding The Regulations Of Gas Cylinder Placements. • Understanding Why Testing Is Done And What Methods Can Be Used. • Understanding The Need For Ventilation In Regards With Gas And Fumes. • Pipe Sizing And Clculations Of Approximate Lengths. • Installation And The Need For Shut Off Valves Theoretical And Practical. • Working Out Quotes For Customers. • Supervisory And Management Techniques.
Duration 120 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 91782 NQF Level: 06 Credits: 360
Course /event title (to appear on the accreditation certificate)
Dstv Installation
Modules /topics (outline only) • Introduction To Safety And Personal Protective Equipment. • Safety Theory And Hand Tools Theory. • Drilling Machine Safety. • Ladders And Lifting Equipment Safety. • Satellite Dish Kit Components. • Installing Software And Locating The Satellite. • Choosing Where To Install The Satellite Dish. • Cable Specifications. • Selecting A Mounting Option. • Installing The Mount On A Wooden Deck Post. • Installing The Mount On A Wood Framed Roof. • Installing The Mount On Concrete Or Concrete Masonry Walls. • Installing The Mount Onto A Metal Pole. • Installing The AZ/EL Cap Onto The Satellite Dish. • Installing The Transmitter/Tria Assembly On The Feed Arm. • Connecting The Feed Arm To The Satellite Dish. • Installing The Satellite Dish/Cap Assembly Onto The Mast. • Installing And Routing Interior Cable. • Installing Exterior Cables And Connecting To Ground Block. • Connecting The Cable To The LNB. • Grounding The Satellite System. • Grounding The Mast. • Grounding The Metal Pole. • Attaching The Shroud. • Pointing The Satellite Dish. • Connecting The Transmitter.
Duration 30 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 13977 NQF Level: 03 Credits: 10
Course /event title (to appear on the accreditation certificate)
Refrigeration
Modules /topics (outline only) • Introduction Safety And P.P.E • Repair And Safety Precautions • Refrigerator Heat Flow And Air Flow • Defrost System • Temperature Control • Special Types Of Refrigerators • Diagnosis And Repairs • Principles Of Refrigeration • Optional Tools • Using A Vom And Ammeter • Testing Voltage • Testing For Continuity And Resistance • Testing Amps In The Main Power Line • Controls • Cold Control/ Air Door Identification • Energy Saver • Mullions And Sweat • Condenser And Condenser Fan • Compressor • Evaporator Fan • Frost Problems • Defrost Heater • Terminating Thermostat • Drive Gear Installation • Hoses • Power Supply • Wiring And Electrical • Testing The Compressor For Power • Compressor Starting • Drain System • Refrigerator Door Seals And Alignment • Strange Refrigerator Noises • Fire In The Fridge • Icemaker Operations • Blocked Fill Tube • Fill Solenoid Valve • Combination Units & Refrigerant Safety • Leak Detections & Detectors • Trouble Shooting
Duration 60 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA
Unit Standard: 65489 NQF Level: 03 Credits: 122