Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 1/24
Title: WORK INSTRUCTION FOR ENVIRONMENT SUBSTANCES MANAGEMENT
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-01-01
COVER SHEET AND REVISION HISTORYREV. DCN NUMBER DATE HISTORY ORIGINATOR
23 11000424 07/01/2011 1. 5.1 REACH 24 11000595 08/18/2011 7.3.1 25 11000792 09/24/2011
RoHS exemption into 7.1 (Lead in high melting temperature type solders)
26 12000196 03/17/2012 1. 7.1 add analysis instrument into table 7.1
2. REACH SVHC add attachment 3 for REACH SVHC
3. 7.2.2 <700ppm modify page 11 (Sb)
27 12000533 08/08/2012 1. 2.8Nintendo green procurement specification
2. 7.1 3. REACH 7th
28 13000074 03/16/2013 Change attachment 3 from REACH 7th into REACH 8th
29 13000271 06/08/2013 1. Cl,Br<700ppm,Cl+Br<1000ppm 2. EON & 3. REACH 9th 139~148
30 13000424 08/07/2013 1. 7.2.2 PFOS/PFOA <10ppm. 2. Pb+ Cd + Hg + Cr6+ <80ppm
31 14000036 01/27/2014 Add #145~#151 of attachment 3 for SVHC 10th candidates list
. REACH SVHC
DOC. OWNER: RD
REVIEWED BY: HR, MC, FACILITIES, RD, PE, PP, MFG2, MFG1, TEST, SM, QC, QA
APPROVED DOCUMENT CHANGE NOTICE ON FILE IN DOCUMENT CONTROL
LINGSENdify page 1ify page 12.8Nin2.8Nin
specificspecifi
CONTROL3.3.
T2013 Change 013 Change RERENT
8/20138/2013
DOCUMENT 0ppm ppmSb) Sb)
tendo green prtendo green pcationcation
7.17.1RR
VALID 2233D
8/07/28/07/2
IF1.1. THIS attachmattachm
ACH 8ACH 8thth ClCl
STAMP EACH 7th EACH 7th ment 3 ment 3
IS rocuroc RED urement urement
DOEOEOREARE
NOT,Br<700pp,Br<700pONON
COPYfrom REACfrom REAC
pmpm
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 2/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
1.0 Purpose/Scope /
1.1 Purpose: The purpose of this standard is to clarify the managerial classification of the chemical materials which may have impact to the environment and which are contained in the parts materials sub materials or packing materials could constitute the products of Lingsen or are used in the production process of the products of Lingsen ,to be classified into the materials the use of which is to be prohibited ,the ones to be discontinued ,the ones the use of which is to be curtailed and the ones to be adequately controlled ,and to make the people in and out of Lingsen fully aware of such classification , and by doing so , to promote the corporate activities which do not create a load to the environment.
:, ,
, ,,
1.2 Scope: Parts Raw materials Sub materials Packing materials and consumables used in
the production process .
:
2.0 Reference Documents
2.1 Procedure for environmental substances management Spec:14-1001
Spec:14-1001
2.2 Working instruction for vendor assessment & management Spec:20-3201
Spec:20-3201 2.3 SONY Technical Standards: Management regulations for the environment-related
substances to be controlled which are included in parts and materials SS-00259 SONY SS-00259.
2.4 Samsung Electronics Standards for control of substances with environmental impacts within
products (SEC Registration No.0QA-2049 ) to Correspond to the ROHS (WEEE) Directive
.(SEC Registration ),ROHS (WEEE)
LINGSEN ub materiub materi
CONTROL
DOCUMENTPacking mPacking
VALID mentalmental
Spec Spec
IFl subsl sub THIS
stat
STAMP IS RED materialsaterials
DO ancence
11NOTes managees manag
COPY
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 3/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
2.5 Procedure for Product/Process Chang Spec:50-3400
/ Spec:50-3400
2.6 All Customer’s environmental substances management spec.
.
2.7 Substance of very high concern, SVHCs by REACH and in accordance with Directive 67/548/EEC and criteria. REACH .
2.8 Nintendo green procurement specification(500-J20100)
3.0 Safety -N/A - 4.0 Equipment/Material
5.0 Requirements
5.1 Prohibited substance by Lingsen: In accordance with environmental regulations and requirements of customers .The substances listed couldn’t be added intentionally even in accepted range of concentration.
Name of chemical material (group) ( )
application
Cadmium and its compounds *1
The stabilizers, pigments, or dyes used for plastics (including grubber)materials surface treatment(e.g. plating)
( )( )
Lead and lead its compounds *1
The paints, pigments, and inks containing lead, which are used for PWBs & Packaging materials
&
LINGSEN
CONTROL
byby
DOCUMENT --
VALIDLingLin
stomers .Ttomers .Tf concentrf concentr
IFgsen:gsenhehe
THIS In aIn
STAMP IS RED
DO ac
substansubstan NOTcordancordance ceces lices li
COPY
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 4/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
Name of chemical material (group) ( )
application
Mercury and its compounds *1 Packaging materials pigments ,paints ,and inks Mercury or its compounds mixed in plastics
Hexavalent chromium compounds *1 Packaging materials, Batteries, Catalysts
, , Chlorinated organic compounds
*1 PCBS PCN PCT SCCP
All purposes (e.g. ones for the flame retardants contained in plastics)
brominated organic compounds *1
PBB PBDE ( Deca-BDE)
All purposes (e.g. ones for the flame retardants contained in plastics)
Trisubstituted organotin compounds including Tributyltin compounds(TBT),Triphenyltin compounds(TPT)*
( ,)
Ink, preservatives
Asbestos *1 All purposes(e.g. insulators,fillers)
Specific AZO compounds *1 Of the product made on the assumption that it constantly touches a human body, the part that touches the human body.
Formaldehyde *1 The wooden products made from chipboard or plywood ,which are employed in products for import into Europe (e.g. speakers, racks)
( )
Ozone depleting substances *1 ( CFCs , HCFCs , Halons ) Refrigerant, vesicant
,
Nickel and compounds *1
Application (alloys) for the components contacting human skins .(external chassis / case parts)
()
Arsenic and compounds Paints, inks , preservatives , and fungicides
LINGSENInk, preservaInk, preserva
LIN
CONTROL TRAll pAll pTROLTR
CO
DOCUMENT tives tives
VALID IF OOtotoFFFF THIOf thef theTHIS
purposurpo
THI STAMP ses(e.g. ses(e.g.STA
IS RED
DOouches ouches NOTproduct producta huma humOTOT CO
mmCOPYinsuinsulatorlatorYCO
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 5/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
Name of chemical material (group) ( )
application
Polyvinyl chloride (PVC) *1
All applications except for cables and interconnect Parts, insulators
Radioactive substance *1
All purposes
Beryllium oxide and beryllium copper *1 Alloy , Ceramics materials
Selenium and its compounds *1 Semiconducor , pigment, catalyst, sensitizer, oxidizing agent
Halogen (Sb ,Cl ,Br ,P)
( , , , ) Flame retardants (epoxy, compound ,substrate)
( , , ) Bismuth and its compounds Alloy, solder
, Specific phthalates
(DEHP,DBP,BBP,DINP,DIDP,DNOP,DNHP)
Plasticizer ,dyestuff, pigment, paint ,ink, adhesive
Perfluorooctane sulfonates PFOS/ PFOA / ( )
Paper treatment: paper and packaging ,
Specific benzotriazole *1 Ultraviolet protectants and ultraviolet absorbers applied to decorative laminate,developing papers,molded plastic parts
, , /
Tetrabromobisphenol A(TBBPA)*1 A
The cabinets of products (including accessories) and PWBs
Dimethyl fumarate (DMF) Drying agent, preservatives ,
Hexachorobenzene Pesticide, ,
Aldrin Pesticide, ,
Dieldrin , Endrin Pesticide,
,
DDT Pesticide, ,
Chlordan Pesticide, ,
LINGSENlasticizer ,dlasticizer ,d
LINL
CONTRONTROL (( ) )
Paper tPaper LTR
ONTRTRDOCUMENT
yestuff, pigmeyestuff, pigmeT
treatmtreatDO
VABPA)PA)VALID VA
IFddF THISUltravioletUltravioletISdecoratidecoratiIS
SSTAMP ment: paper ament: paper
,, AMPS
IS REDnt, paint nt, paint
DDODNOT
roroive laminive lami COPYtectants antectants anOPY
a
nate,dnateOPY
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 6/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
Name of chemical material (group) ( )
application
Toxaphene Pesticide, ,
Mirex Pesticide, ,
Pentachlorophenol (PCP) Pesticide, ,
Note 1:The materials the use of which is prohibited by legal regulations but which are not likely to
be used in LPI products have been .
1: ,
5.1.1 With regards to the packing materials , the allowable concentration of heavy metal impurities such as mercury , cadmium , hexad chrome and lead must be less than 100ppm in total.
,100ppm
5.1.2 Allowable concentration of cadmium in plastics.
Cadmium and its compounds should not be added at all to plastics such as cord coating and housings.
However, due to the detection instrument measuring capability & limitation. The impurities which comes from the nature can not exceed 5ppm. mixture of the impurities existing in nature , the concentration less than 5ppm is accepted.
,, 5ppm
5.1.3 ICP data of raw material (ink ,epoxy) must be tested in way of solid.
( ) ICP data.
LINGSEN admiumadmium
CONTROL oncentrationoncentration
DOCUMENT aa
xad chromxad chro
VALID ium aum a
IF THISof cadmiuof cadmiu STAMP ISRED and land l
DO NOT m inm in COPYn plastics. plastics
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 7/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
5.1.4 ICP data of raw material must be tested with homogeneous material, not mix sample.
ICP data
5.2 Management standards To management the above-mentioned substances, the following two levels are used. (See the latest revision of SONY SS00259 for details.)
, 2 ( SONY SS00259 )
5.2.1 Level 1- The substances and purposes classified at this level are those whose use must be banned immediately. 1 - .
5.2.2 Level 3 No periods or targets for reduction are currently set for the substances and purposes classified at this level. However, the contents of the substances in parts and materials ought to be reduced. 3
5.3 Items for Public ( inside / outside company ) To make sure all the people ( inside / outside company ) can fully understand how LPI preferentially handle the materials ( use prohibition ,removed completely in the early stage), the following items are taken by LPI:
( )
,
5.3.1 LPI investigation report of the chemical material and related specification which are exchanged between LPI and her suppliers.
Each department of LPI and the companies related to LPI are obliged to implement the investigation prescribed in Annex 1 / 2, when exchanging the delivery specifications covering new customers, new parts, materials , sub materials , packing materials and production processes.
,
LINGSENction arction arowever, the cowever, the c
CONTROL DOCUMENTently set ently setcontencontents of thts of t
VALIDsideside D / out / outthe people the people dle thdle th
IF sideside
THIS STAMP IS REDthe sthe s
substancsubstanc
DOe comp compide / ide / ouou
((
NOT pany ) pany )
COPY
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 8/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
/ .
Also, when exchanging new product specifications with suppliers, suppliers are obliged to clearly state if any LPI prohibiting material is contained.
, ,,
With regards the cadmium in plastics, supplier are obliged to submit the report on the measurement prescribed in Note 3 of the provision 5.1.1 of this standard.
,
5.3.2 Response to customer requirements
In the event that a customer requires investigation on the environment related substances, the sales headquarters should be as window , the environment management department need to make a arrangements for the investigation. The department responsible for the relevant product implements the investigation and the sales headquarters replies to the customer . The record of which must be maintained respectively by the department responsible for the product , the sales headquarters .
, ,
, , ,
6.0 Preparation/Setup –N/A / - 7.0 Procedure
7.1 Table List of “Environment-related Substances to be controlled (‘The Controlled Substances’ for raw material)”
( ) :
LINGSENents ents
r requires r requires iiheadquarters seadquarters s
ment needment needle fole f
CONTROLor theor th
eplies to eplies to thethey the departmthe departm
DOCUMENTvestigation ovestigation oshshould be as would be as
d to make a arto make a are relevane releva
VALID IF THIS ment respent resp STAMPrrangerrang
nt product int productustomer . Thustomer . Tponsibponsib
ISwindwinementemen RED n the envn the env
dow , thedow , thess
DO NOT COPYhe ree re
ble ble for the pfor the
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 9/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
Attribute
Substance name
Instrument Method
Control standard
Heavy metals
Cadmium and cadmium compounds
ICP AAS
IEC 62321 Ed.2 (111/95/CDV)
Plastics : Soldier paste :< 20 ppm
Lead and lead compounds
ICP AAS
IEC 62321 Ed.2 (111/95/CDV)
Substrate : < 100 ppm Solder paste :< 1000 ppm Pb-Free Solder ball :<500ppm . Pb-free plating anode ball
<50ppm Iron alloy :< 0.35 wt% Aluminum alloy :< 0.4 wt% Copper alloy :< 4 wt% RoHS exemption: Lead in high melting temperature type solders (i.e. lead-based alloys containing 85 % by weight or more lead) ROHS -
(ex: 85%)
Mercury and mercury compounds
ICP AAS
IEC 62321 Ed.2 (111/95/CDV)
All uses-Banned.
Hexavalent chromium compounds
UV-VIS IC-AQF
1.Qualitative method for metal:IEC 62321(111/95/CDV)Annex B :IEC 62321(111/95/CDV)
B 2.Quantitative method for
material other than metal: IEC 62321(111/95/CDV) Annex CIEC 62321(111/95/CDV)
C
Surfaces that are processed with plating or conversion coating-banned.
/
LINGSEN
LIN
CONTROL TRy NTROTR
DOCUMENT
OC
VALID m m ID IF IFIFIF THISICP CP AAS AAS S STAMP
SSTS
IS RED
DO UV-VISUV-VISC-AC-AO
NOT NO11NONO
COPYIEC 62321 EIEC 62321 (111/95/(111/95OPY
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 10/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
Attribute
Substance name
Instrument Method
Control standard
Chlorinated organic compounds
Polychlorinated biphenyls (PCBs)
GC-MS US EPA 8270D All uses-Banned.
Polychlorinated naphthalene (PCN)
US EPA 8270D All uses-Banned.
Polychlorinated terphenyls (PCT)
US EPA 8270D All uses-Banned.
Short-chain chlorinated paraffins(C10~C13) (SCCP)
US EPA 8270D All uses-Banned.
Other chlorinated organic compounds
US EPA 8270D Flame retardants used<700ppm <700ppm
Brominated organic compounds
PBBPBDE (
Deca-BDE)
GC-MS IEC 62321 Ed.2 (111/95/CDV)
All uses-Banned.
Other brominated organic compounds
IC-AQF EN 50267-2-2, ASTM D7359
Flame retardants used<700ppm <700ppm
Trisubstituted organotin compounds including Tributyltincompounds(TBT), Triphenyltin compounds(TPT)*
( ,)
GC-MS DIN 38407-13 All uses<1000ppm <1000ppm
Asbestos
SM, PLM and XRD
, EPA 600/R-93/116 All uses-banned (eg.insulators,fillers)
(eg. ) Specific AZO compounds
(24 ) GC-MS HPLC
EN 14362-1~2, CEN ISO/TS 17234
All uses.It is prohibited.
Formaldehyde
HPLC,
,
EN 120 ( ) DIN 53315 ( )
Woodwork ,It is prohibited.
Polyvinyl chloride (PVC) and compounds (PVC)
FTIR KS 0210 Intentionally –Banned*Packaging components,<1000ppm
Ozone depleting substances *1 ( CFCs , HCFCs , Halons )
GC-ECD US EPA 5021
EPA-8021B All purposes. It is prohibited.
LINGSEN NIC-AQF IC-AQFGSEN
LI
CONTROL), ,
GC-MGC-MOLTR
DOCUMENT 95/CD95/CD
EN 5EN 5UMENOC
SSD
VALID VALI IF IF THIS STAMP ASTMASTM
DIN 3DIN TAMS
IS 267-2267-2D735D73
RED 2-2, 2-2, RED
DO M, PLM, PDO NOT
NOCOPY
384073840
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 11/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
Attribute
Substance name
Instrument Method
Control standard
Hydrofluorocarbon (HFC), Perfluorocarbon (PFC)
GC-MS USEPA5021 Refrigerant/insulation-Banned
,
Nickel and compounds
ICP
EN 1811
Application (alloys) for the components contacting human skins .(external chassis / case parts). It is prohibited.
()
Arsenic and compounds
ICP AAS US EPA 3052
Paints, inks , preservatives , and fungicides. It is prohibited.
/ / /
Radioactive substance ICP US EPA 3052 & 6020
All purposes. It is prohibited.
Beryllium oxide ,,beryllium copper , ICP US EPA 3050B
All uses.(eg Alloy ,Ceramics materials)
(eg. ,)
Selenium and compounds ICP US EPA 3052
Semiconductor , pigment, catalyst, sensitizer, oxidizing agent. It is prohibited.
/ / //
Halogen ( Sb /Cl /Br / P) ( / / / )
ICP IC-AQF
US EPA 3050B BS EN 14582 EN 50267-2-2
Green molding compound ,epoxy , green substrate. Sb,Cl,Br <700ppm,P< 900 ppm, Cl+Br < 1000ppm.
/ / : , , <700ppm,
<900ppm, + < 1000ppmSpecific Phthalates
(DEHP,DBP,BBP,DINP,DIDP,DNOP,DNHP, DIHP,DHNUP,DMEP)
(11 )
GC-MS HPLC EPA 0506. All uses< 1000ppm
< 1000ppm
LINGSEN NICP ICP GSEN
LIN
LILI
CONTROL ICICTR
C
DOCUMENT US EPAUS EPAMEN
OCDOCOC
VALID IF IFIFIF THISP P
THSTAMP
UUMP
SS
IS 052 &052 &IS RED
& 6020& 6020RED
DO ICPICP
NOT ONOTNOCOPYS EPA 30S EPA 3
C
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 12/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
Attribute
Substance name
Instrument Method
Control standard
Dibutyltin (DBT) compounds GC/FPD DIN38407-13
All applications including additives of plastics<1000ppm
<1000ppm Dioctyltin (DOT) compounds
GC/FPD DIN38407-13 Additives of textiles<1000ppm <1000ppm
Benzene GC-MS USEPA5021 All uses-Banned.
Perfluorooctane sulfonates (PFOS)/PFOA
/ ( ) LC-MS US EPA 3540C All uses-Banned.
Dimethyl fumarate (DMF)
GC-MS EPA-3540C All uses<0.1ppm <0.1ppm
Specific benzotriazole US EPA 3540C All uses-Banned.
Tetrabromobisphenol A(TBBPA)
A GC-MS LC-MS EPA-3540C, EPA-3545 < 1000ppm
Hexabromocyclododecane(HBCDD) GC-MS EPA-3540C
Flame retardants used in plastics and resins<1000ppm
<1000ppm
Cobalt dichloride
IC-AQF + ICP
EN 14582 + EPA 3052 Humidity indicator/ desiccant agent –Banned.
/
Packing material ( Pb+ Cd + Hg + Cr 6+)
ICP AAS IEC 62321 Ed.2
Packing material ( Pb+ Cd + Hg + Cr 6+) < 100 ppm
REACH _SVHC substances ( ) - - 0.1
Remark: The measurement flowchart of test report must be attached
:
7.2 Inspected items for electrical and metal assembly ( for product).
( ) :
LINGSEN NC-MS -MS LC-MS LC-MS EN
LIN
LINGLI
CONTROL GC-MGC-
TRICICNTROTR
DOCUMENT 33
EPA-3540C, EEPA-3540C, NT
OCMS MS OCUM
OC
VALID LID IF IFIF THISC-AQF + C-AQF +
ICP ICP S STAMPEPA-3EPA-
SSTAS
IS 5IS
RED PA-3545 PA-3545 DR
DO ICP ICP AAAA
OO NOT ENEN
NONONOCOPY
N 14582N 14582PY
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 13/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
7.2.1 ROHS Banned immediately ROHS Attribution for
materials Materials name
Inspected subject
Limited
Electrical materials
Such components as used in the electrical assembly include transistors, diodes, resistance chips, resistors, electrolytic condenser, chip capacitor, IC semiconductor
IC …
Cd < 100 ppm Pb < 1000 ppm
Hg <1000 ppm
Hexavalent chromium <1000 ppm
PBBs <1000 ppm PBDEs <1000 ppm
Packing materials
Pb+ Cd + Hg + Cr6+
+ + +
< 100 ppm
7.2.2 LINGSEN internal control limited Materials name
Inspected subject
Limited
Finish Products
Cd N.D. Pb < 50 ppm Hg N.D.
Hexavalent chromium N.D. PBBS N.D. PBDES N.D.
Sb (only green package) < 700 ppm P (only green package) < 900 ppm
halogens : Cl ,Br (only green package) <700 ppm + Br + Cl (only green package) < 1000 ppm
PFOS/PFOA <10 ppm Packing materials
Pb+ Cd + Hg + Cr6+
+ + +
< 80 ppm
LINGSEN NNNontrol limitedntrol limited
LI
COCONTROL In
Cd Cd TRO Pb Pb CONTCHCO
DOCUMENT NT
nspectednspecteDOC
VALIDHg Hg
IDVAPBBPBBSSVALIVA
PPVAVAIF IFHHIF
THIS SHISTHSTAMP d subject subject MPSTA
IS IS REDD
DO xavalentxavalentODO NOT OTchrochrNO
COPYPYCOPC
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 14/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
7.3 Raw material inspection item :
7.3.1 Direct materials :
Item Control Material
Cd & Cd cpds
Pb & Pb cpds
Hg & Hg cpds
Cr6+ & Cr6+ cpds
PBBsPBDEs
Sb,Cl, Br and ,P
, ,
PFOS/PFOA
/
( )
HBCDD/
Phthalates(DEHPBBP/DBP/DIBP)
Limited value
(ppm) N.D. <50 N.D. N.D. N.D.Sb,Cl,Br<700
P<900 Cl+Br<1000
N.D. <1000
Lead frame
<40000
(For EON) Substrate
<100
Epoxy ( )
LCP lid LCP
Solder ball
<500
Solder paste
<1000
(Br,Cl)
Plating anode ball
<50
Compound
Ink
Wire ( / / )
(For EON) Chemical
LINGSEN GSEN
NGLIN
COCONTROL OL<500 <500 TROL
ONOL
COO
DOCUMENT MEMENT
CUME
DOCUCU
VALID VALID000 000 ID<50<50ALIDV
IDV
IF FF THIS THTHITH
STAMP PMPST MPSTAST
IS IS RED DREDD
DO DDODNOTTOTOTN
COPYPYOPCOO
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 15/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
7.3.2 Packing materials
Item Control Material
Cd & Cd cpds
Pb & Pb cpds
Hg & Hg cpds
Cr6+ & Cr6+ cpds
PBBs PBDEs
Sb,Cl, Br and ,P
, ,
PFOS/PFOA
/ ( )
Limited value (ppm) <2 <2 <2 <2 <5
Sb<700 Cl,Br,P<900 Cl+Br<1500
N.D.
Cover tape (Br,Cl) Carrier tape (Br,Cl) Tray (Br,Cl)
Reel (Br,Cl) Plastic bag (Br,Cl)
Pizza-box Tube (Br,Cl) Rubber stopper Ink (Packing) Packing box Carton box Label Printed label Tray band Desiccant Moisture indicator card (Br ,Cl)
ENGSEN
INEN
LINI
CONTROL ROTRO
ORO
COO
DOCUMENT TENUMEN
DOEN
DOCDO
VALVALID LILIDLI
VALIF FF THISS
TS
THITSTAMP
MPMPS
MPSTA
IS SIS RED (B (B
RREDR
DDO DODNOT TNONN
COPYPYOPCO
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 16/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
7.4 Consumable inspection item : Item
Control Material Cd and Cd cpds
Pb and Pb cpds
Hg and Hg cpds
Cr6+ and Cr6+ cpds
PBBs PBDEs
Alcohol Tape Flux Mold release Permanent marking pen ink Tyvek Clean dice SD-18 (Diamaflow)
8.0 Shut down-N/A - 9.0 Maintenance/Calibration –N/A / - 10.0 Supplementary Information
10.1 Operational criteria :
10.1.1 All other affairs related this standards should be reviewed & approved by the “committee”. The committee is “ LPI Environment Administration Committee”. Which is organized by the representatives from the each department & LPI management level.
,
10.1.2 If need arises for amendment or abolishment of this standard, it is decided by “LPI
Environment Administration Committee”.
,
10.1.3 Banned substances management: The banned and fully abolished substances regulated in the table of the banned substances should be arranged not to be used and to be reduced in yearly environment management project. This project should be adjusted to customers’ requirements and finished within the regulated deadline.
: ,
LINGSEN
CONTROL
airs related tairs related The c The c
DOCUMENT
VALID nized bynized byent level. ent level.
IFmmimmiy they the
THIShis standarhis standarittee is “ttee is
STAMP : :
dd
IS RED
DO reprerepre NOT s ss s
“ LPI ELPI Ennesentativesentativ
COPYhould be rehould be renvironvir
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 17/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
( ) Non-Using Environmentally Substances Certificate (Admit and Examine)
:
( To) : : Company : Representative E-mail :
, ,
What we purchase material we purchase or material used in the manufacturing process does not include those such material which is listed in the banned immediately.
, , : Material used in the process & manufacturing, the report & composition as shown below: 1. Product
Name:: PKG Type: Plant::
2. used material: :
Name of vendor:
: Name of vendor
com
pound
/ : Material name/type
epoxy
/ : Material name/type
: Name of vendor
: Name of vendor
ink
/ : Material name/type
plating
/ : Material name/type
: Name of vendor
: Name of vendor
lead frame
/ : Material name/type
package
/ : Material name/type
3. ICP data & (MSDS) 141021-01-03
LINGSEN eport &eport &
PKG Typ PKG Typ
CONTROL OLOLONTONT
DOCUMENT sition as sition as
e: :
DDDDDDDDD
VALID VVVVVVALVAL
IF THIS SISHISHISSSISSIS STAMP NNTATATATATATAMP
TAMPTATA
IS RED belobel
DDODOO ODO NOTepoxy epoxy NOTM
NN TT COPYMateMateCOPYame of vendme of ven
COPYCOPYCC
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 18/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
( ) Non-Using Environmentally Substances Certificate (mass production)
xxxxxxxxxxxx (date):
(company):
(stamp): E-mail: 1. , (Below table is used to prove that what products and materials LPI buy do not use any prohibitive substance) 2. :
(below is the result of confirmation for non-used prohibitive substance) (Change)
Package Material table Vender Type (Material) (Process)
(Change content)
Molding compound
D/A Adhesive
ink
Lead frame
Lead finish
packing
Molding compound
D/A Adhesive
ink
Lead frame
Lead finish
packing
Molding compound
D/A Adhesive
ink
Lead frame
Lead finish
packing
141021-02-02
LINGSEN hibhib
NNSESEype ype SESESESENSENSESE
NGSNGSSSSSSLL
SSLINLIN
CONTROL ROLOL
NTNTNTNTNTNTNTNTRONTRO
CC NTNTCCCCCCONCONCCCC
DOCUMENTe) e) (Chan(ChaNTNT
(Material)(Material)MENMENENENENENTENTENENCUMCUM
DDDDDDDDOCDOCDDDDDDDDDDD
VALID DDAA
DDound ound AAAAAALIDALIDDDDDD
VAVADD
VAVAVAVAVAVAVAVAVAIF IIIFIF THIS SSSSSSSSSISISTHISTHISISISISISISISISTT
STAMP MPMPMPMPMPMPMPMPMPMPMP
TAMTAMMMMMMMMSTST
IS SSISIS RED(Process)(ProcessEDEDRERE
DO OODODOOOOOOOODDNOT TTNNNNNNNNNOTNOTNNNN
COPYOPOPOPOPOPOPOPOPYOPYOPOPCOCOOOOOOOO
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 19/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
. REACH SVHC (Substance of very high concern) list No Substance CAS No. 1 Anthrancene 120-12-7 2 4,4’-Diaminodiphenylmethane 101-77-9 3 Cobalt dichloride 7646-79-94 Diarsenic pentaoxide 1303-28-25 Diarsenic trioxide 1327-53-36 Sodium dichromate 7789-12-07 5-tert-butyl-2,4,6-trinitro-m-xylene (musk xylene) 81-15-2 8 Dibutyl Phthalate (DBP) 84-74-2 9 Bis (2-ethyl(hexyl)phthalate) (DEHP) 117-81-7
10 Benzyl butyl phthalate (BBP) 85-68-7 11 Hexabromocyclododecane (HBCDD) 25637-99-412 Alkanes, C10-13, chloro (Short Chain Chlorinated Paraffins) (SCCPs) 85535-84-813 Bis(tributyltin) oxide (TBTO) 56-35-9 14 Lead hydrogen arsenate 7784-40-915 Triethyl arsenate 15606-95-816 2,4-Dinitrotoluene 121-14-2 17 Anthracene oil 90640-80-518 Anthracene oil, anthracene paste, distn. Lights 91995-17-419 Anthracene oil, anthracene paste, anthracene fraction 91995-15-220 Anthracene oil, anthracene-low 90640-82-721 Anthracene oil, anthracene paste 90640-81-622 Diisobutyl phthalate 84-69-5 23 Lead chromate 7758-97-624 Lead chromate molybdate sulfate red (C.I. Pigment Red 104) 12656-85-825 Lead sulfochromate yellow (C.I. Pigment Yellow 34) 1344-37-226 Tris(2-chloroethyl)phosphate 115-96-8 27 Coal tar pitch, high temperature 65996-93-228 Acrylamide* 79-06-1 29 Ammonium dichromate 7789-09-5
30 Boric acid 10043-35-3 11113-50-1
31 Disodium tetraborate, anhydrous 1303-96-41330-43-412179-04-3
32 Potassium chromate 7789-00-633 Potassium dichromate 7778-50-9
LINGSEN SEN
NGSELIN
CONTROL OLe paste, distne paste, distnNTROe paste pasteCONC
DOCUMENT ))
TENT UME
DOCUD
VALID low low cene paste cene paste ALID
VAIF antantIF THIS n. Lights . LightsSthracenethraceneTHIST
STAMP PTAMP
STAIS SIS RED EDRED
DO DODNOT fractiofracti
NOTNCOPYPY
on on COP
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 20/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
No Substance CAS No. 34 Sodium chromate 7775-11-335 Tetraboron disodium heptaoxide, hydrate 12267-73-136 Trichloroethylene 79-01-6 37 Cobalt(II) sulphate 10124-43-338 Cobalt(II) dinitrate 10141-05-639 Cobalt(II) carbonate 513-79-1 40 Cobalt(II) diacetate 71-48-7 41 2-Methoxyethanol 109-86-4 42 2-Ethoxyethanol 110-80-5
43 Chromic acid, Oligomers of chromic acid and dichromic acid, Dichromic acid
7738-94-5-
13530-68-244 Chromium trioxide 1333-82-045 2-ethoxyethyl acetate 111-15-9 46 Strontium chromate 7789-06-2
47 1,2-Benzenedicarboxylic acid, di-C7-11-branched and linear alkyl esters (DHNUP) 68515-42-4
48 Hydrazine 7803-57-8, 302-01-2
49 1-methyl-2-pyrrolidone 872-50-4 50 1,2,3-trichloropropane 96-18-4 51 1,2-Benzenedicarboxylic acid, di-C6-8-branched alkyl esters, C7-rich (DIHP) 71888-89-6
52
Zirconia Aluminosilicate Refractory Ceramic Fibres are fibres covered by index number 650-017-00-8 in Annex VI, part 3, table 3.1 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, and fulfil the three following conditions: a) oxides of aluminium, silicon and zirconium are the main components present (in the fibres) within variable concentration ranges b) fibres have a length weighted geometric mean diameter less two standard geometric errors of 6 or less micrometres (μm). c) alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+MgO+BaO) content less or equal to 18% by weight
53 Calcium arsenate 7778-44-154 Bis(2-methoxyethyl) ether 111-96-6
55
Aluminosilicate Refractory Ceramic Fibres are fibres covered by index number 650-017-00-8 in Annex VI, part 3, table 3.1 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, and fulfil the three following conditions: a) oxides of aluminium and
SENC7-11-braC7-11-braINGS
CONTROL OLONT
CO
DOCUMENT TMENT
anched and lanched and CUMD
VALIDc acid, di-Cacid, di-CLIDVALte RefraVVALI IF FIF THIS
HISTHSTAMP linealinea
TAMPS
ISar alkar alkS RED EDylylRE
DO-bran-branchcODOramDO NOT OT
hedhedNOCOPYCOPYC
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 21/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
No Substance CAS No. silicon are the main components present (in the fibres) within variable concentration ranges b) fibres have a length weighted geometric mean diameter less two standard geometric errors of 6 or less micrometres (μm) c) alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+MgO+BaO) content less or equal to 18% by weight
56 Potassium hydroxyoctaoxodizincatedichromate 11103-86-957 Lead dipicrate 6477-64-158 N,N-dimethylacetamide 127-19-5 59 Arsenic acid 7778-39-460 2-Methoxyaniline; o-Anisidine 90-04-0 61 Trilead diarsenate 3687-31-862 1,2-dichloroethane 107-06-2 63 Pentazinc chromate octahydroxide 49663-84-564 4-(1,1,3,3-tetramethylbutyl)phenol 140-66-9 65 Formaldehyde, oligomeric reaction products with aniline 25214-70-466 Bis(2-methoxyethyl) phthalate 117-82-8 67 Lead diazide, Lead azide 13424-46-968 Lead styphnate 15245-44-069 2,2'-dichloro-4,4'-methylenedianiline 101-14-4 70 Phenolphthalein 77-09-8 71 Dichromium tris(chromate) 24613-89-672 1,2-bis(2-methoxyethoxy)ethane (TEGDME; triglyme) 112-49-2 73 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME) 110-71-4 74 Diboron trioxide 1303-86-275 Formamide 75-12-7 76 Lead(II) bis(methanesulfonate) 17570-76-277 TGIC (1,3,5-tris(oxiranylmethyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trione) 2451-62-9
78 -TGIC (1,3,5-tris[(2S and 2R)-2,3-epoxypropyl]-1,3,5-triazine-2,4,6-(1H,3H,5H)-trione) 59653-74-6
79 4,4'-bis(dimethylamino)benzophenone (Michler's ketone) 90-94-8 80 N,N,N',N'-tetramethyl-4,4'-methylenedianiline (Michler's base) 101-61-1
81 3[4-[4,4'-bis(dimethylamino) benzhydrylidene]cyclohexa-2,5-dien-1-ylidene]dimethylammonium chloride (C.I. Basic Violet 3)
548-62-9
82 26[4-[[4-anilino-1-naphthyl][4-(dimethylamino)phenyl]methylene]cyclohexa -2,5-dien-1-ylidene] dimethylammonium chloride (C.I. Basic Blue 26) 2580-56-5
LINENEN
NGSENGSENoducts withEN
LINGSELINGSE
NGSELINLINLIN
CONT OLOLTROLTROL OL
CONTROCONTROdianiline TROCONTCONCONTCCC
DOCUENTENT
UMENTUMENT
aniline ENT
OCUMEOCUME
UME
DOCUDOCUDOCUDDDO
VAVALIDLIDVALIDVALID
xy)ethane (TALIDVAhyleVAL
IFIFIFIF IF THISSSTHIS HISSTHISTHISTHISTTT
PPPAMPAMP P
STAMPSTAMP
AMPSTASTSTA
ISSISISSIS ISISDDREDRED DREDREDRED
DDDODODODODME;DODDNOTNOTNOTNOT NOTNNN
COPPYPYCOPYCOPYPYCOPCOPCOPC
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 22/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
No Substance CAS No.
83 4 , -Bis[4-(dimethylamino)phenyl]-4 (phenylamino)naphthalene-1-methanol (C.I. Solvent Blue 4) 6786-83-0
84 4,4'-bis(dimethylamino)-4''-(methylamino)trityl alcohol 561-41-1 85 Bis(pentabromophenyl) ether (DecaBDE) 1163-19-586 Pentacosafluorotridecanoic acid 72629-94-887 Tricosafluorododecanoic acid 307-55-1 88 Henicosafluoroundecanoic acid 2058-94-889 Heptacosafluorotetradecanoic acid 376-06-7
90 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - covering well-defined substances and UVCB substances, polymers and homologues
-
91
4-Nonylphenol, branched and linear - substances with a linear and/or branched alkyl chain with a carbon number of 9 covalently bound in position 4 to phenol, covering also UVCB- and well-defined substances which include any of the individual isomers or a combination thereof
-
92 Diazene-1,2-dicarboxamide (C,C'-azodi(formamide)) 123-77-3
93 Cyclohexane-1,2-dicarboxylic anhydride (Hexahydrophthalic anhydride - HHPA) 85-42-7
94 Hexahydromethylphathalic anhydride, Hexahydro-4-methylphathalic anhydride, Hexahydro-1-methylphathalic anhydride, Hexahydro-3-methylphathalic anhydride
25550-51-0, 19438-60-9, 48122-14-1, 57110-29-9
95 Methoxy acetic acid 625-45-6 96 1,2-Benzenedicarboxylic acid, dipentylester, branched and linear 84777-06-097 Diisopentylphthalate (DIPP) 605-50-5 98 N-pentyl-isopentylphtalate 776297-69-999 1,2-Diethoxyethane 629-14-1
100 N,N-dimethylformamide; dimethyl formamide 68-12-2 101 Dibutyltin dichloride (DBT) 683-18-1 102 Acetic acid, lead salt, basic 51404-69-4103 Basic lead carbonate (trilead bis(carbonate)dihydroxide) 1319-46-6104 Lead oxide sulfate (basic lead sulfate) 12036-76-9105 [Phthalato(2-)]dioxotrilead (dibasic lead phthalate) 69011-06-9106 Dioxobis(stearato)trilead 12578-12-0107 Fatty acids, C16-18, lead salts 91031-62-8108 Lead bis(tetrafluoroborate) 13814-96-5109 Lead cynamidate 20837-86-9
ENanc
GSEN eof
LINGSENLINGSEazodi(formaGSENLINGhydrideLLING
ROLLROLTROL
ONTROanhydride, H
CONTmethylphaCOalic a
ROL
NTinclu
MENT
OCUMENOCUMENmide)) MEN
DOCUMHexahydro
DOCOCUMD
VV LIDDVALIDVALID
LIDVALVALc acid,VALIV
IF FIFhydrIIIF THISHexahy
THIShalic anhyTHI
ide
STAMMPophtha
STAMP STAMSTAydro-4SSTAM
ISISISlic anIISD
y
REDRED REDREDRR
ODODO ODODOsteDO NOTOT
drid
NOT NONONO
YPYCOPYmethylp
COPYde, CO Y
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 23/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
No Substance CAS No. 110 Lead dinitrate 10099-74-8111 Lead oxide (lead monoxide) 1317-36-8112 Lead tetroxide (orange lead) 1314-41-6113 Lead titanium trioxide 12060-00-3114 Lead Titanium Zirconium Oxide 12626-81-2115 Pentalead tetraoxide sulphate 12065-90-6116 Pyrochlore, antimony lead yellow 8012-00-8117 Silicic acid, barium salt, lead-doped 68784-75-8118 Silicic acid, lead salt 11120-22-2119 Sulfurous acid, lead salt, dibasic 62229-08-7120 Tetraethyllead 78-00-2 121 Tetralead trioxide sulphate 12202-17-4122 Trilead dioxide phosphonate 12141-20-7123 Furan 110-00-9 124 Propylene oxide; 1,2-epoxypropane; methyloxirane 75-56-9 125 Diethyl sulphate 64-67-5 126 Dimethyl sulphate 77-78-1 127 3-ethyl-2-methyl-2-(3-methylbutyl)-1,3-oxazolidine 143860-04-2128 Dinoseb 88-85-7 129 4,4'-methylenedi-o-toluidine 838-88-0 130 4,4'-oxydianiline and its salts 101-80-4 131 4-Aminoazobenzene; 4-Phenylazoaniline 60-09-3 132 4-methyl-m-phenylenediamine (2,4-toluene-diamine) 95-80-7 133 6-methoxy-m-toluidine (p-cresidine) 120-71-8 134 Biphenyl-4-ylamine 92-67-1 135 o-aminoazotoluene 97-56-3 136 o-Toluidine; 2-Aminotoluene 95-53-4 137 N-methylacetamide 79-16-3 138 1-bromopropane; n-propyl bromide 106-94-5 139 Cadmium 7440-43-9140 Cadmium oxide 1306-19-0141 Dipentyl phthalate (DPP) 131-18-0
142
4-Nonylphenol, branched and linear, ethoxylated [substances with a linear and/or branched alkyl chain with a carbon number of 9 covalently bound in position 4 to phenol, ethoxylated covering UVCB- and well-defined substances, polymers and homologues, which include any of the individual isomers and/or combinations
-
LING ENNGSENGSEN EN
LINGSELINGSEne; methyloGSELINGLINGLINGL
CONT OLLTROLTROL OL
CONTROONTROlbutyl)-1,3-oTROL
CONTCONTCONTCCCO
OCUNTNT
UMENTMENT NT
OCUMENOCUMExirane UMEN
DOCUDOCUOCUDODODO
VVVALVALVALLIDLIDVALIDVALID
s salts LIDPhenyVAL
IFFIFIF IFIIIHISHISHISxazoli
THISTHIS HISTHTHTH
PPPAMP AMPP
STAMPSTAMP
AMPSTASTA
dine STAISISISISIS IS R DDREDRED DREDREDREDRR
DODODOODODO DODOOTOTNOTNOT OTNONNO
COPPYYCOPYCOPYPYCOPCOPCOPCCC
Lingsen Precision Industries, Ltd
DOC NO REV. DATE PAGE 14-1021 31 01/27/2014 24/24
THIS INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF LPI AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN OF LINGSEN
909600-02-01
No Substance CAS No. thereof]
143 Ammonium pentadecafluorooctanoate (APFO) 3825-26-1144 Pentadecafluorooctanoic acid (PFOA) 335-67-1
Remark: No. 139-144 SVHC 9th candidates list (updated:20/6/2013)
145 Cadmium sulphide 1306-23-6146 Dihexyl phthalate 1306-19-0
147 Disodium ,3'-[[1,1'-biphenyl]-4,4'-diylbis(azo)]bis(4-aminonaphthalene-1-sulphonate) (C.I. Direct Red 28) 573-58-0
148 Disodium 4-amino-3-[[4'-[(2,4-diaminophenyl)azo][1,1'-biphenyl]-4-yl]azo] -5-hydroxy-6-(phenylazo)naphthalene-2,7-disulphonate (C.I. Direct Black 38) 1937-37-7
149 Imidazolidine-2-thione; (2-imidazoline-2-thiol) 96-45-7 150 Lead di(acetate) 301-04-2151 Trixylyl phosphate 25155-23-1
10th Candidate List (updated: 16/12/2013)
LINGSEN ENENEN))
CONTROL DOCUMENT NTNTENT
VALID IF THIS STAMP IS RED DDD
DO NOT COPY