MULTIMEDIA
M.Stabilimento / Plant
Via Bicocca, 14/c
40026 Imola - Bo (Italy)
tel. +39 0542 653441
fax +39 0542 653601
Sede legale ed amministrativa Head Quarter
Cefla s.c.
Via Selice Provinciale, 23/a 40026
Imola - Bo (Italy)
tel. +39 0542 653111
fax +39 0542 653344
www.anthos.com
MULTIMEDIA
01
/20
13
A
MU
LGB
13
1S
00
Our
po
licy
of
cons
tant
tec
hno
log
ical
up
gra
din
g m
eans
tha
t te
chni
cal s
pec
ifica
tio
ns m
ay b
e su
bje
ct t
o c
hang
e w
itho
ut p
rio
r no
tice
.
FULLY INTEGRATED TECHNOLOGY
MULTIMEDIA
M.
Integration of the dental unit with a sophisticated, highly practical multimedia system provides a ‘ready-to-go’ solution that gives maximum diagnostic efficiency.High-tech devices for ‘live’ communication of information and digital X-ray diagnosis systems offer the dentist new levels of comfort, performance and speed.
“I’VE CHOSEN ANTHOS. EVERYTHING’S MORE CONVENIENT AND FASTER.”
Minimum system requisites
Operating system Microsoft® Windows® 7 Professional 64
Microsoft® Windows® 7 Professional 32
Microsoft® Windows® 7 Home Basic 32
Ports USB 2.0
Processor Intel® Core™ i3-2120 (3.30 GHz, 3 MB cache, 2 core) or higher
Memory 4 GB 1333 MHz DDR3 SDRAM
Display 1366 x 768 a 32 bit TRUE COLOR
Graphics card Processes up to the above-indicated resolution
Classe A9, Classe A7 Plus and Classe A6 Plus can house the RXDC HyperSphere Plus X-ray unit, the Zen-X intraoral X-ray sensor, the LED monitor and the dental camera. On Classe R7, Classe A5 and Classe A3 Plus it is possible to incorporate all the multimedia devices including the intraoral sensor, the only exception being the X-ray system.By way of a simple connection to an external PC – which, where the touch-screen monitor is installed, can be piloted by the dentist – all diagnostic images can be displayed and managed directly on the incorporated screen.
INCORpORATING THE LATEST
GENERATION OF MULTIMEDIA
DEVICES ON THE DENTAL UNIT
IMMEDIATELY bOOSTS THE DENTIST’S
DIAGNOSTIC CApAbILITIES AND
SMOOTHLY INTEGRATES THEM
INTO THE TREATMENT CENTRE.
95.5°
80°
ON THE ANTHOS MULTIMEDIA SYSTEM
THE DENTIST IS AbLE TO CHOOSE
bETwEEN TwO DIFFERENT CAMERAS
wITH DIFFERENT pERFORMANCE
CHARACTERISTICS.
bOTH ARE FULLY INTEGRATED INTO
THE DENTAL UNIT ELECTRONICS,
wHICH SIMULTANEOUSLY MANAGES 4
FREEzE-FRAME IMAGES
(16 IMAGES OVER 4 DISpLAY pAGES ON
THE CLASSE A7 pLUS AND CLASSE A9)
AND DIRECT VIDEO IMAGES.
EACH FREEzE-FRAME IMAGE CAN
ALSO bE VIEwED IN FULL-SCREEN
zOOM MODE AND SAVED ON
A pC VIA THE SpECIAL SOFTwARE
AND THE NECESSARY
CONNECTIONS.
C-U2 C-U2 provides effective communication through sharp imaging, involving the patient in every stage of treatment and illustrating both the reasons for treatment and its benefits.Digital Progressive Scan technology allows freeze-frame images to be attained without analogue conversion of the video signal.The camera provides the highest lighting level n its category while the Focus Free system ensures pin-sharp images and avoidsthe need for manual focussing.Brightness is controlled automatically by the microprocessor inside the handpiece.
Touch Sensitive Control Freeze-frames at the touch of a button: the C-U2 handpiece has a touch-sensitive area that allows freeze-framesand images of special-interest areas to be acquired without any vibration.
Retro-Flex Vision The wide viewing angle is partially retroflexed to allow comfortable access to those distal and rear dentition zones where a standard 90° view would be penalised.
Monitor technical specifications
Flat screen 19” – 16/9 TFT active matrix
Number of pixels (H x V) 1366 x 768
Brightness 250 cd/m2
Contrast ratio 1000/1
Screen resolution (Analog RGB) VGA ~ WUXGA - HDMI
Mount VESA 75 - 100
IP protection rating 44 front, 30 rear
Medical device certificate CE 93-42
Technical Specifications C-U2 C-U2 PRO
Handpiece weight 80 grams 80 grams
Handpiece length 195 mm 189 mm
Distal section width 17.5 mm 15.0 mm
Distal section height 15.1 mm 9.5 mm
Viewing angle 80° (diagonal) 65° (diagonal)
Depth of Field 8 – 40 mm 1.75 – 70 mm
Retroflex 95.5° 90°
Optical system Three lenses, F/# 13 Six lenses with prism
Sensor Progressive scan
Frame rate 30 frame/sec. Self-adapting
C-U2 pRO PRO optics provides images via three different focal adjustments. Macro Close-Up enhances perception of the tiniest details. Intra-oral Depth of Field allows for complete inspection of the oral cavity. Extra-oral focussing allows for the easy capture of a smile, to add to patient records.
INTEGRATED INTRAORALCAMERAS AND 19” LED MONITOR
19” LED monitor The medical monitor available on the whole range of Anthos dental units is a benchmark in terms of working ergonomics and technology. Available in both standard and touch-screen versions, the monitor is attached to the operating light column by way of a single or double articulation support arm and comes, on the touch-screen version, complete with a PC connection lead. CE 93/42 certified, the 16:9 format screen is waterproof.
Touch-screen operation An effective dentist-patient communication tool, the touch-screen version of the monitor, where supported externally by a PC, makes control of patient data even more immediate. To make it easier for dentists to use the touch screen, the double articulation support arm allows the monitor to be moved closer, thus aiding interaction via the screen and the display of digital images and X-rays. During surgery itself, the monitor can simply be retracted from the work zone.
LED technology LED lighting gives low consumptionand long-lasting light sources, yet also provides outstanding contrast, excellent colour intensityand sharp images.
Easy connection A USB lead, the most commonPC-peripherals connection method, can be used to connect the touch-screen version to the computer incorporated in the operating zone.A lead connection is, however, also available on the standard version.
1% 100%50%
Technical Specifications
Generator Constant potential, microprocessor-controlled
Working frequency 145-230 KHz (typically 175 KHz)
Focal spot 0,4 mm (IEC 336)
Anode current 6,7 mA
Voltage at X-ray tube 60, 63, 65 kV
Exposure time 0.010 – 1.000 seconds, R’10 and R’20 scale
Source-skin distance 30 and 20 cm with round cross-section, 30 cm rectangular
Irradiated field 35 x 45 mm rectangular, Ø 55 mm o Ø 60 mm round
Additional collimators 31 x 41 mm and 22 x 35 mm, for size 2 and size 1 sensors
Duty Cycle Continuous operation with self-adjustment up to 1s/60s total
Stability Automatic lock/release, with touch-sensitive activation (HyperSphere)
precision diagnostics Specifically designed for digital X-ray imaging, the constant potential tube head, together with the 0.4 mm focal spot - among the smallest available - ensures images are always in-focus.
Health and Safety RXDC HyperSphere Plus, with its constant potential high frequency X-ray generator, significantly reduces radiation dosage compared to traditional X-ray units. Not only is the most harmful radiation almost completely eliminated, but the rectangular 30 cm collimator minimizes the exposed body surface and increases X-ray parallelism.This leads to better image quality and better safeguarding of patient health.
Touch-sensitive Two conveniently positioned touch-activated areas ensure easy head release and positioning.As soon as the user releases his/her grip, the head is locked in place with the utmost precision.
Comfortable grip The ergonomically shaped sides of the tube head allow for quick, simple, effortless positioning, giving outstanding fingertip control.
Lightweight and compact The 30 cm X-ray collimator is almost fully embedded in the body of the tube head,making the head itself more compact and lighter than ever.Unique tube head design, together with stable aluminium arms, make this unit effortless to manoeuvre.An integrated self-balancing system reduces any riskof tube head vibration during image acquisition.
Sequenced exposures RXDC allows uninterrupteduse during multiple exposures (e.g. systematic examination) thanks to the Dynamic Duty-Cycle,based on real-time control of bulb temperature,shown on the large handheld display.
FEATURING UNpARALLELED
TECHNOLOGY,
RXDC HYpERSpHERE pLUS
IS UNIqUE AMONG COMMERCIALLY
AVAILAbLE X-RAY UNITS.
THE FULL-SwIVEL bALL jOINT IS
NOTHING LESS THAN REVOLUTIONARY.
ROTATING FREELY AROUND
THE SpHERE, THE TUbE HEAD
CAN REACH ANY pOSITION,
EVEN THE VERTICAL.
AN AUTOMATIC TOUCH-SENSITIVE
LOCk/RELEASE DEVICE ALLOwS
EFFORTLESS SINGLE-HANDED
REpOSITIONING OF THE HEAD
bETwEEN ONE EXpOSURE
AND THE NEXT.
wireless control The handheld digital control unit communicates with the X-ray tube head wirelessly, thus allowing in-surgery positioning of controls exactly as desired. Extremely easy to use, the control device provides a complete range of easy-to-understand exposure programmes.No more complicated programming or panels with a multitude of keys: just select the anatomical region of interest and the RXDC automatically calculates the correct exposure.
MyRay Multi-Mode The most appropriate combination of technical factors (kV, mA and exposure time) is calculated automatically according to the build of the patient and the anatomic region of interest.
RXDC HYpERSpHERE pLUSINTEGRATED X-RAY UNIT
Thin profile Rounded contours
Sealed, liquid-proof
Reinforced cableconnection on back of sensor
Protective outer casing
Specially shaped active area, with clipped front corners to optimise exterior shaping of the protective casing
zEN-XINTEGRATED DIGITAL
X-RAY SENSOR
Technical specifications Size 1 – Standard Size 2 – Large
External dimensions (mm) 38.9 x 24.9 41.9 x 30.4
Thickness (mm) 5.3 5.7
Pixel matrix 1500 x 1000 1700 x 1300
Pixel size (μm) 20 20
Max. spatial resolution (lp/mm) 25 25
Digital image bit depth 14 bit acquisition - 16,384 maximum levels of grey
Scintillator technology CsI (Caesium Iodide) with micro-columnar structure
Direct exposure protection FOP (Fibre Optic Plate)
Compatibility with X-ray generators Any AC or DC technology X-ray generator with kV values in the 50 – 70 kV range and precision control of exposure times
Thanks to its excellently ergonomic rounded shaping, Zen-X adaptsto the anatomy of the oral cavitywith ease, simplifying positioningof the sensor and ensuringmaximum patient comfort.Precision diagnostics, always Zen-X uses a technologically advanced 3-layer sensor that captures high resolution images with minimum X-ray doses. Versatile sensor sizing Zen-X sensors come in two sizes, allowing you to choose the one that best suits your needs.The Zen-X control unit featuresa hot-swap connector so the dentist can work quickly and easily with both sensors, size 1 and 2. Specific alignment devices are designed for both sizes to facilitate intraoral positioning.
MAkING INTRAORAL
IMAGING SIMpLE
zEN-X HAS bEEN DEVELOpED
TO IMpROVE AND SIMpLIFY
X-RAY DIAGNOSIS DIRECTLY
ON THE DENTAL UNIT.
INTEGRATED bOTH wITH THE
ELECTRONICS AND pHYSICALLY
wITH THE DENTIST’S MODULE, THE
SENSOR IS ALwAYS COMFORTAbLY
wITHIN ARM’S REACH,
THUS SpEEDING Up
THE ACqUISITION pROCEDURE.