Download - Rotary Air Valve
C
D
M
F
CI ROTARY A Available Available
iron/stain Square inlet/out Rugged h Machine SS, harde
DR‐S ROTARY Available Available
iron/stain Square in Food Gra
available Interior c
MINI 19:
Availableflange in
Fabricatestainless
Option foreduced end roto
Direct dr
FT ROTARY AIR Available Square o
inlet/out Rubber t Standard
design Available
mild stee Polyureth
PP
AIRLOCK VALe in 10 sizes e in cast nless steel
tlet flanges heavy duty ded close toleraened, rubber VALVE – COMe in 3 sizes e in cast nless steel nlet/outlet flaade Options e coating option
e in 2” and 3” let/outlet ed in mild stesteel or metring styvolume, or clr ive assembly
RLOCK VALVE e in 9 sizes r round tlet flanges ips and sides d 6‐vane rotor
e in fabricatedel or stainlesshane, EPDM,
PPRROODDUU ddee
LVE
esign ance rotor tip opti
MPETITOR SERIE
anges
ns
square
el or
yle, osed
r
d steel vulkollan, nit
UUCCTT IIddeessiiggnneedd ff
ions ES
trile tips
IINNFFOORRffoorr yyoouurr
MD (M Ava Rou Rug Ele
to 5 Chr
tun
CI MET
Ava Squ
inle Con
deccon
Mewit
AF (AER Ava For
sys Sui Ava
sta Spe Ven
DTFV R
Ava Ava Can Sam
RRMMAATTrr ssuucccceessss
MULTI‐DUTY) Railable in 5 sizund inlet/outgged heavy devated Tempe500 deg F rome, Teflon,ngsten interio
RIC SERIES ROailable in 10 suare or Roundet/outlet flanntains CE claration of nformity etric IP54 geath metric shafRO‐FLOW) FEEailable in 4 sizr pneumatic cstems ited for 15 psailable in castinless steel ecial drive pant port stand
ROTARY VALVEailable in Sizeailable in castn replace smame options as
TTIIOONN
ROTARY AIRLOzes tlet flanges uty design erature
, or coatings
TARY VALVE sizes d ges
rmotor ft EDER: zes conveying
i t iron or
ckages ard
E es 12” x 24”, 1t iron or stainall screw convs standard CI/
SSHHEEEE ((8800
wwwwww..aacc
OCK VALVE
12” x 36”, 12”nless steel veyors /MD Rotary V
EETT 0000)) 665555--33
ccssvvaallvveess..cc
” x 48”
Valve
33444477 ccoomm
C
Q
G
M
CI‐RPV ROTAR Available Dust tigh Available
operatedelectric a
Round orinlet/out
Clam styl Elevated
QUICK CLEAN R Available Square o
inlet/out Endplate
removal for quick
Available Same opt
GRAVITY DIVER
Available Square o
flanges 45 & 60 d Bottom a Pneumat Fabricate
stainless, 2 or 3‐wa
MAINTENANCE
Available Square o Manual h
operator ¼” thk 30 Bolted re
PP
RY PLUG VALVe in sizes 8”‐1ht rapid actinge with air d or manual oactuator r square tlet flanges le rotor temperature
ROTARY VALVe in sizes 6”‐1r round tlet flange e and rotor without tools clean servicee in cast iron otions availabl
RTER VALVE e in 7 sizes r round inlet/
degree outletaccess door tically operateed mild steel, , or aluminumay diverters E SLIDE GATES e in 10 sizes r round flanghand crank orr 04 SS blade eplaceable UH
PPRROODDUU ddee
VE 6” g
or
e to 500 deg F
E 6”
s e or stainless stle as CI/MD R
/outlet
ts
ed
m constructio
ge available r pneumatic
HMW guides
UUCCTT IIddeessiiggnneedd ff
F
teel Rotary Valve
n
IINNFFOORRffoorr yyoouurr
S‐PELLE Ava No Rou
inle Sta
doo Sid
adj Ava
conQUICK C
Qu& rwitforslid
Ava CI/
Val AdjDOUBLE
Ava Squ Pre
for Pne Cap
ins Ava
couCDC CI
Ava Sui Ava
or s Rou
flan Ho
opt
RRMMAATTrr ssuucccceessss
ET FEEDER ailable in sizen‐jamming deund or squareet/outlet flanandard inspecor e inlet with justable flow ailable in castnstruction CLEAN ON RAIick Clean endrotor removathout tools r cleaning on de rail systemailable for /MD/DR‐S/Pelves justable tip oE FLAP VALVEailable in 3 sizuare or roundessure differer 30” WG eumatic or gepacity Dutchmpection doorailable in gravunterweight d ROTARY VALVailable in 4 sizited for 15 PSailable in caststainless steeund inlet/outnges using vent potion
TTIIOONN
es 6”‐14” esign e ges ction
control gate t iron or stain
ILS ROTARY VAdplate ble
m
llet Feeder
options
zes d inlet/outlet ential rated
earmotor opeman with r vity design VE zes SI t iron el tlet
ort
SSHHEEEE ((8800
wwwwww..aacc
nless steel
ALVE
flanges
eration
EETT 0000)) 665555--33
ccssvvaallvveess..cc
33444477 ccoomm
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
CI Series Rotary
Airlock Valve
Drop-Thru Feeder/ Airlock
Features Options ___
• Available in 10 sizes
• Dependable effective design
• Heavy duty rugged construction
• Precision machining of components
• Unique shaft seal design
• Pressure differentials up to 15 psig
• Square flanges
• High temperature options up to 750 F
• Available in cast iron, 304 SS and 316 SS
• Standard 8-vane rotor design comes complete
with beveled tips and sides, option 6-vane available
• ACST-4 shaft seal or ACS Packing gland shaft
seals available
• Housing vent ports
• Surge hoppers, blow through adapters, shear plate deflectors
• Rotor options: closed end, metering style,
shallow pocket, adjustable tips, teflon coated
• Adjustable rotor tips available in EPDM, hardened steel, stainless steel, bronze, polyurethane
• Interior coating options: hard chrome, tungsten,
and teflon
• Shaft seal and rotor pocket air purge
• Special drive packages
• Motion speed switch assemblies
ELEVATIONELEVATION
PLAN VIEW
ACST-4 PACKING GLAND
SHAFT SEAL ASSEMBLY OPTIONS
FLANGE DETAIL
ITEM A B C D E F G H I J K6 X 6 10 5 8 3/16 1/2 22 9/16 16 3/16 5 1/2 13 11/16 6 4 3/4 N/A8 X 8 10 1/2 5 1/4 8 5/16 1/2 24 13/16 17 6 15 1/16 8 3 1/2 4
10 X 10 12 3/4 6 3/8 9 9/16 1/2 26 5/16 20 15/16 7 5/8 15 9/16 10 4 1/2 4 1/212 X 12 15 1/2 7 3/4 11 5/8 1/2 29 9/16 23 13/16 8 1/2 17 7/16 12 5 1/4 5 1/414 X 14 19 9 1/2 13 3/8 1/2 31 1/4 24 9 17 3/4 14 5 1/2 5 1/216 X 16 19 1/2 9 3/4 13 3/4 1/2 34 7/16 26 3/16 10 18 15/16 15 6 1/8 6 1/418 X 18 26 13 17 5/8 3/4 41 1/4 23 3/4 12 18 18 5 3/8 5 3/822 X 22 30 15 20 7/8 3/4 45 5/8 29 3/4 14 3/16 26 1/8 22 6 1/2 6 1/224 X 24 32 1/2 16 1/4 22 1/8 3/4 47 1/8 29 3/4 16 26 5/8 24 6 626 X 26 36 18 23 11/16 3/4 52 15/16 32 7/8 17 29 7/16 26 6 630 X 30 44 22 28 7/8 3/4 58 9/16 41 3/8 21 3/4 32 13/16 30 6 1/4 6 1/4
5 HP5 HP
7 1/2 HP
2 HP
1 HP3/4 HP3/4 HP
H.P.1/2 HP
1 1/2 HP
3 HP
5 HP2950 lbs.
1500 lbs.
700 lbs.
225 lbs.WEIGHTS
240 lbs.400 lbs.650 lbs.
900 lbs.
2500 lbs.2700 lbs.
3390 lbs.9.00
2.70
1.10
.10C.F.R.
.20
.40
.75
1.40
4.606.40
16.603/4 X 3/8
5/8 X 5/165/8 X 5/16
1/2 X 1/4
3/8 X 3/163/8 X 3/163/8 X 3/16
T (KEYWAY)3/8 X 3/16
1/2 X 1/4
5/8 X 5/16
3/4 X 3/82 15/16Ø
2 7/16Ø2 7/16Ø
1 15/16Ø
1 1/2Ø1 1/2Ø1 1/2Ø
S1 1/2Ø
1 15/16Ø
2 7/16Ø
2 15/16Ø3 1/43 1/43 1/43 1/43 1/43 1/43 1/43 1/43 1/43 1/43 1/4
RL M N O P Q11 8 7/16 21 12 1/8 8 7/812 12 7/16 23 13 1/4 9 3/4
15 1/4 12 7/16 25 14 1/4 10 3/417 12 7/16 27 3/4 15 5/8 12 1/818 12 7/16 30 1/4 16 3/4 13 1/220 12 7/16 33 17 1/2 15 1/223 16 9/16 38 3/4 21 1/4 17 1/228 16 11/16 42 3/4 23 1/4 19 1/232 20 11/16 44 3/4 24 1/4 20 1/232 20 11/16 52 28 1/2 23 1/240 24 3/4 57 1/4 31 1/2 25 3/430 X 30
26 X 2624 X 2422 X 2218 X 1816 X 1614 X 1412 X 1210 X 108 X 86 X 6ITEM
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
MD Series Rotary Airlock Valve Drop-Thru Feeder/ Airlock
Features Options ___
• Available in 6 sizes
• Dependable effective design
• Heavy duty rugged construction
• Precision machining of components
• Unique shaft seal design
• Pressure differentials up to 15 psig
• 150 # Round flanges
• High temperature options up to 750 F
• Available in cast iron, 304 SS and 316 SS
• Standard 8-vane rotor design comes complete with beveled tips and sides, option 6-vane available
• ACST-4 shaft seal or ACS Packing gland shaft seals available
• Housing vent ports
• Surge hoppers, blow through adapters, shear plate deflectors
• Rotor options: closed end, metering style,
shallow pocket, adjustable tips, teflon coated
• Adjustable rotor tips available in EPDM, hardened steel, stainless steel, bronze, polyurethane
• Interior coating options: hard chrome, tungsten,
and teflon
• Shaft seal and rotor pocket air purge
• Special drive packages
• Motion speed switch assemblies
N/A21 1/415Ø18 9/1611 3/426 3/1633 1/16115 1/211 1/223MD 16N/A18 3/414Ø17 15/1610 1/224 13/1631 7/16114 1/410 1/420 1/2MD 14N/A1712Ø16 5/169 1/223 11/1628 7/163/4139 3/1618 3/8MD 12N/A14 1/410Ø15 1/16822 15/1626 1/83/411 3/87 1/215MD 10N/A11 3/48Ø13 15/166 3/419 5/1623 11/165/89 7/166 1/412 1/2MD 8N/A9 1/26Ø13 1/165 1/217 15/1621 5/161/28 1/25 5/1610 5/8MD 6
KJIHGFEDCBAITEM
ELEVATIONELEVATION
PLAN VIEW
ACST-4 PACKING GLAND
SHAFT SEAL ASSEMBLY OPTIONS
FLANGE DETAIL
MD 4 7 3/8 3 11/16 9 5/16 3/8 17 11/16 14 5/8 4 1/2 9 3/8 4Ø 7 1/2 N/A
6 1/48 1/214 3/45/8-11 NC89Ø 2 1/4 1Ø 1/4 X 1/8 .025 175 lbs.
850 lbs.
250 lbs.
WEIGHTS
315 lbs.400 lbs.650 lbs.
900 lbs.1.10
.10
C.F.R.
.20
.40
.75
1.401/2 X 1/4
3/8 X 3/163/8 X 3/163/8 X 3/16
T (KEYWAY)
3/8 X 3/16
1/2 X 1/41 15/16Ø
1 1/2Ø1 1/2Ø1 1/2Ø
S
1 1/2Ø
1 15/16Ø3 1/43 1/43 1/43 1/43 1/43 1/4
RL M N O P Q
11Ø 8 3/4-10 NC 21 12 1/8 8 7/813 1/2Ø 8 3/4-10 NC 23 13 1/4 9 3/4
16Ø 12 1"Ø 25 14 1/4 10 3/419Ø 12 1 1/8Ø 27 3/4 15 5/8 12 1/821Ø 12 1 1/8Ø 30 1/4 16 3/4 13 1/2
23 1/2 16 1 1/8Ø 32 17 1/2 14 1/2
MD 4ITEM
MD 6MD 8MD 10MD 12MD 14MD 16
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
FT (Flex-Tip) Rotary Valve
Features Options ___
• Available in 10 sizes
• Designed for 18” WG
• Fabricated mild steel construction
• EPDM standard wipers which have good
abrasion resistant characteristics
• Dual or single rotor wiper blades
• 4-bolt normal duty flange bearings
• Standard right angle gearmotor with chain drive
• PSHA guarded
• Standard temperature up to 300 F
• Removable side plate for easy maintenance
• Reduced volume rotor pockets
• Stainless Steel construction
• Optional polyurethane wiper material available
• Customs sizes available
• Motion speed switch
• Special motors available
• Direct drive motor available
• Horizontal drive configurations avail
• Standard or extended clearance wipers
30 3/433 1/2Ø 32 7/16Ø 32 1/8 3 1/4 2 3/16Ø 1/2 X 1/4 18 11/16 22 40 11/16 61 1/2 18 5/8
49 5/8
30ØFT 30FT 24 24Ø
42 3/8
17 7/849 1/234 5/818 3/415 7/81/2 X 1/42 3/16Ø3 1/4267/16Ø2427 1/2Ø 17 7/817 7/825 1/2Ø 24 7/16Ø 24 3 1/4 2 3/16Ø 1/2 X 1/4 15 7/8 18 3/4 34 5/8 49 1/2 17 7/8
42 3/8
22ØFT 22FT 20 20Ø
39 5/16
17 7/843 3/831 5/817 1/214 1/81/2 X 1/42 3/16Ø3 1/4227/16Ø2423 3/8Ø 21 11/1617 1/219 1/4Ø 16 7/16Ø 18 3 1/4 1 11/16Ø 1/2 X 1/4 11 5/16 15 1/8 26 7/16 35 17 7/8
35 1/4
16ØFT 16FT 14 14Ø
35 1/4
17 7/83526 7/1615 1/811 1/21/2 X 1/41 11/16Ø3 1/416 1/27/16Ø1618 1/2Ø 17 1/213 1/215 1/4Ø 12 7/16Ø 14 3 1/4 1 7/16Ø 3/8 X 3/16 9 12 1/2 21 1/2 27 13 7/8
27 1/16
12ØFT 12FT 10 10Ø
25 9/16
13 13/16231910 3/48 1/43/8 X 3/161 7/16Ø3 1/4127/16Ø1213 1/4Ø 11 1/29 1/211 1/4Ø 8 7/16Ø 10 3 1/4 1 1/4Ø 1/4 X 1/8 7 1/4 10 3/4 18 19 13
23 7/16
8Ø
21 7/16
1315169 1/261/4 X 1/81 1/4Ø3 1/487/16Ø89 1/4Ø6Ø 7 1/26 1/2
FT 8FT 6FT 4
VALVE4ØA
7ØB
6C D
7/16ØE6 3 1/4
F G1 1/4Ø 1/4 X 1/8
H I4 7/8 6 1/2
J K11 3/8 13
L M12 7/16
N
17 15/16O
OPTIONAL SQUARE FLANGE
ELEVATIONELEVATION
PLAN VIEW
.10S316 9/16
RQ4 7/811 11/16
P REV. 100%
290280200
WEIGHTT U7 4
V W6
X7/16Ø- - -
- - - 7/16Ø1269 1/415 1/2 6 22 2 5/8 .234.643 3/823 7/87 1/416 5/8 11 1/4 8 12 7/16Ø- - -
- - -
- - - 7/16Ø121013 1/417 7/8 8 1/4 26 1/8 3 1.34 3053802.46 3 1/227 3/8918 3/8 15 1/4 12 16 7/16Ø- - -
- - - 7/16Ø161418 1/211 5/16 4 1/8 6.20 8158206.203 5/833 11/1611 5/1622 7/16 19 1/4 16 20 7/16Ø
HP1/21/23/43/41
1 1/22
22 7/16 33 11/163 5/8
37/16Ø242023 3/825 15/16 14 9/16 40 1/2 3 11/16 21.00 13003 11/166 1/4 185021.00641 15/1615 5/1626 5/8 26 22 16 7/16Ø 3
37/16Ø16242826 5/8 15 5/16 41 15/16 6 21.00 18507 1/4200042.504 1/3251 3/418 5/833 1/8 33 1/2 30 32 7/16Ø 54 1/32
VALVEFT 4FT 6FT 8FT 10FT 12FT 14FT 16FT 20FT 22FT 24FT 30
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
Features
• Pressure differentials to 15 psig
• Outboard Bearings (permanently sealed and lubricated)
• Replaceable packing rings
• Available in three sizes
• Square Flanges
• Heavy shaft diameters minimizing rotor deflection
• Unique shaft seal design (less maintenance)
• Available in cast iron, 304 SS and 316 SS • High temperature option up to 750 º F
• Heavy duty rugged construction
• Precision machining of components
Options
• 6-vane or 8-vane rotor available
• ACST - 4 shaft seals or packing gland style shaft seals available.
• Rotor options: closed end rotor, shallow pocket design, adjustable rotor tips • Rotor adjustable rotor tips available in EPDM, polyurethane, stainless steel and hardened steel
• Hard chrome interior
• Standard rotor design comes complete with beveled tip and sides.
• Refer to CI Series brochure for square inlet and outlet flanges in small and larger sizes.
• Refer to MD Series brochure for round inlet and outlet flange configurations.
DR-S Series* Square FlangeRotary Airlock
Feeders
Drop-ThruDrop-in Replacement
for HD and HDX Series
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
Drop In Replacement – Without Drive Package
Drop In Replacement – With Drive Package
VALVE A B C D E F G H I J K L M N O P Q R S T REV. 100% WEIGHT
DR-S 8 x 8 5 N/A 9 3/4 7 5/8 11 8 12 6 7 1/4 6 1 3/8 2 1/4 x 1/8 13 1/4 9 3/4 5 1/2 9 1/8 23 1/4 6 5/8 3/8-16 NC .17 (8-VANE) .18 (6-VANE) 185
DR-S 10 x 10 4 4 N/A 9 1/2 13 1/4 12 15 7 1/2 8 1/8 8 1 5/8 2 3/8 x 3/16 14 1/4 10 3/4 6 5/8 10 5/8 25 3/4 7 3/16 3/8-16 NC .34 (8-VANE) . 36 (6-VANE) 240
DR-S 12 x 12 4 7/8 4 7/8 N/A 11 1/4 16 1/4 12 18 1/4 9 1/8 10 1/2 9 3/4 2 3 1/2 1/2 x 1/4 15 5/8 12 1/8 8 1/8 14 29 10 1/8 1/2-13 NC .61 (8-VANE) .64 (6-VANE) 365
VALVE A B C D E F G H I J K L M N O P Q R S T REV. 100% WEIGHT
DR-S 8 x 8 5 N/A 9 3/4 7 5/8 11 8 12 6 7 1/4 6 1 3/8 2 1/4 x 1/8 13 1/4 9 3/4 5 1/2 9 1/8 23 1/4 6 5/8 3/8-16 NC .17 (8-VANE) .18 (6-VANE) 185
DR-S 10 x 10 4 4 N/A 9 1/2 13 1/4 12 15 7 1/2 8 1/8 8 1 5/8 2 3/8 x 3/16 14 1/4 10 3/4 6 5/8 10 5/8 25 3/4 7 3/16 3/8-16 NC .34 (8-VANE) . 36 (6-VANE) 240
DR-S 12 x 12 4 7/8 4 7/8 N/A 11 1/4 16 1/4 12 18 1/4 9 1/8 10 1/2 9 3/4 2 3 1/2 1/2 x 1/4 15 5/8 12 1/8 8 1/8 14 29 10 1/8 1/2-13 NC .61 (8-VANE) .64 (6-VANE) 365
VALVE A B C D E F G H I J K L M N O P Q R S REV. 100% WEIGHT
DR-S 8 x 8 5 N/A 9 3/4 7 5/8 11 8 12 6 9 3/16 11 3/8 1 1/2 3 1/4 3/8 x 3/16 13 1/4 9 3/4 5 1/2 18 9/16 23 1/4 24 .17 (8-VANE) .18 (6-VANE) 185
DR-S 10 x 10 4 4 N/A 9 1/2 13 1/4 12 15 7 1/2 8 1/8 8 1 5/8 2 3/8 x 3/16 14 1/4 10 3/4 6 5/8 10 5/8 25 3/4 7 3/16 .34 (8-VANE) . 36 (6-VANE) 240
DR-S 12 x 12 4 7/8 4 7/8 N/A 11 1/4 16 1/4 12 18 1/4 9 1/8 10 1/2 9 3/4 2 3 1/2 1/2 x 1/4 15 5/8 12 1/8 8 1/8 14 29 10 1/8 .61 (8-VANE) .64 (6-VANE) 365
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
AF (AERO-FLOW) Feeder
AF Endplate
Features Options ___
• Available in 4 sizes
• Compact design
• Housing vent port
• Unique shaft seal design – air sealed for longer
life
• Machined close tolerance to maximize performance
• Suited for pressure up to 15 psi.
• Rugged heavy duty cast iron housing and endplates
• Available in cast iron, 304 SS and 316 SS
• Standard 10-vane rotor design comes complete with beveled tips and sides
• Standard temperature up to 250 F
• Rotor options: adjustable tips, teflon coated
• Adjustable rotor tips available in hardened
steel, stainless steel, bronze
• Interior coating options: hard chrome, tungsten, and teflon
• Special drive packages
• Motion speed switch assemblies
• Elevated temperature to 500
PLAN VIEW
ELEVATION
VIEW "A"
SHAFT SEAL ASSEMBLY
O17 1/2
N7 1/2
ML21 11/1613 3/16
KJ8 1/242 9/16
IH14 7/821 9/16
GF10 1/411 1/4
EDC3 3/8
B6 3/4
A6 5/8
VALVEAF-AAF-BAF-C
101013 1/2 6 3/4 3 1/2 3 3/8 18 10 1/4 21 9/16 17 7/8 44 11/16 11 7/8 16 9/16 28 7/16 7 1/2 17 1/2
13 3/4 21 1/89 1/232 5/818 15/1613 11/1650 7/827 5/1623 9/1615 1/217 1/44 1/1612 11 5/811 5/84 5/8 28 3/4 15 1/2 54 1/2 19 1/4 25 41 1/4 9 1/225 1/4AF-D
3 3/8
4 1/1612 4 5/8 23 9/16 30 15/16 21 1/8
5/8 X 5/169/16Ø172 3/8Ø4Ø15 5/85/8 X 5/161/2 X 1/417/32Ø111 7/8Ø
3Ø 1/2 X 1/4KEYWAYZ
17/32Ø
9/16Ø4444Y
.32S
12RQ
13 3/16REV. 100%
600460380
WEIGHTT U1 7/8Ø 12
V W4 1/2
X1020 1/2
27 3/8 16 3/41213 3/16 3Ø 15 7/16 .601.3317 1/24Ø15 5/8 2 3/8Ø 17 13 1531 3/8
42 11/16 26 1/224 1/223 1/4 2.29 800
HP1
1 1/223AF-D
AF-CAF-BAF-A
VALVE
3 1/23 1/4
P3 1/4
3 1/2
INLET FLANGE DETAILS
designed for your success
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
Quick Clean-MD Series Rotary Airlock Valve Watch our Quick Clean videos at:
www.powderandbulk.com. (Search “ACS Valves” under Videos)
Quick Take Apart Rotary Valve
Features Options ___
• Quick Clean Endplate with hand operated knobs & rotor removable without tools, for cleaning on slide rail system including 2 slider bars with linear bearings with alignment tab and safety switch
• Available in sizes 6”-16”
• Available in our CI, MD, DR-S and S-Feeder
• Designed for safe and easy rotor realignment
• Available in cast iron, 304 SS and 316 SS
• Quick Take Apart for cleaning all internal surfaces hassle free. Disassemble, clean, and reassemble without tools in just minutes
• Optional interior surface finishes up to #4 polish (150-180 grit)
• Supplied with direct drive package
• Standard 8-vane rotor design comes complete with beveled tips and sides, option 6-vane available
• ACST-4 shaft seal or ACS Packing gland shaft
seals available
• Housing vent ports
• Surge hoppers, blow through adapters, shear plate deflectors
• Rotor options: closed end, metering style,
shallow pocket, adjustable tips, teflon coated
• Adjustable rotor tips available in hardened steel, stainless steel, and bronze
• Interior coating options: hard chrome and teflon
• Shaft seal and rotor pocket air purge • Pressure differentials up to 15 psig
• Special drive packages
• High temperature options up to 500 F
• Available in square or round inlet/outlet flanges
designed for your success
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
designed for your success
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
Quick Clean-MD Series Rotary Airlock Valve
Watch our Quick Clean videos at: www.powderandbulk.com.
(Search “ACS Valves” under Videos)
Quick Take Apart Rotary Valve – no rails
Features Options ___
Quick clean design, endplate and rotor
removal without tools Note: valve is not on a rail system, the rotor will require supporting upon removal for cleaning.
• Available in sizes 6”-12”
• Available in our CI, MD, DR-S and S-Feeder
• Designed for safe and easy rotor realignment
• Available in cast iron, 304 SS and 316 SS
• Quick Take Apart for cleaning all internal surfaces hassle free. Disassemble, clean, and reassemble without tools in just minutes
• Optional interior surface finishes up to #4 polish (150-180 grit)
• Supplied with direct drive package
• Standard 8-vane rotor design comes complete with beveled tips and sides, option 6-vane available
• ACST-4 shaft seal or ACS Packing gland shaft seals available
• Housing vent ports
• Surge hoppers, blow through adapters, shear plate deflectors
• Rotor options: closed end, metering style,
shallow pocket, adjustable tips, teflon coated
• Adjustable rotor tips available in hardened steel, stainless steel, and bronze
• Interior coating options: hard chrome and teflon
• Shaft seal and rotor pocket air purge • Pressure differentials up to 15 psig
• Special drive packages
• High temperature options up to 500 F
• Available in square or round inlet/outlet flanges
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
ACS Double Flap Valve
Features Options ___
• Available in 3 standard sizes (8” x 10” x 12”) - Also available in custom sizes
• Dependable effective design
• Pressure differential rated for 30” H2O
• 10 ga. carbon steel housing construction
• Carbon steel flappers with neoprene seal strips
• Pneumatic Operation
• Standard temperature up to 250 F
• Complete factory assembled unit Including: timer, solenoid valve, filter regulator, flow control valve, lubricator, regulator
• Easy to maintain
• Capacity Dutchman with inspection door
• Single & double flap configuration available
• Available in gravity counter weight design
• Stainless Steel construction available
• Inlet/outlet round flange adapters
• Abrasion resistant steel flappers
• Elevated temperature to 500 F
• Dutchman can be removed to shorten overall
height
• NEMA 4 timer, 115-50/60-1, power on light, on/off switch, timer can operate up to 6 valves
• Special heavy duty housing construction
• Gearmotor with chain drive & cam available
NEMA 4 Timer
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
ACS Gravity Diverter Valve
Features Options __
• 2-way Y-Style diverter valve - Fully Guarded
• Available in 7 standard sizes (4” through 16”) - Also available in custom sizes
• Dependable effective design
• Square inlet/outlet flanges standard
• 45 & 60 degree outlets standard
• Flapper seal assembly replaced through bottom access door (bolted)
• 10 ga. carbon steel housing construction
• Carbon steel flappers with neoprene seal strips
• Standard temperature up to 250 F
• Pneumatically operated
• Air control package including solenoid, fitting, &
polyurethane tubing
• Fabricated carbon steel, stainless steel or
aluminum construction
• Inlet/outlet round flange adapters
• Abrasion resistant steel flappers
• Elevated temperature to 500 F
• NEMA 4 timer panel, 115-50/60-1, power on light, on/off switch, timer can operate up to 6 valves
• 3-way diverter valve also available
• Manual operator available
• Custom divert angles to suit application
• (2) side access panels for easy change out of flapper blade
• Back removable panel for easy change of flapper blade
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.acsvalves.com
ACS Pressure / Vacuum
Blower Package
Blower Packages are shipped in heavy duty crating to ensure safe arrival to site.
Blower Package Includes:
Dresser Roots PD Blower standard (substitutions available)
Motor (high efficiency)
Adjustable motor base
V-belt drive & drive guard
Expansion joint at discharge
Pressure relief valve weighted style
Inlet silencer
Inlet filter
Discharge silencer
Back check valve
Pressure gauge
Full assembled on a base frame (mild
steel, primer and painted ACS Blue or optional white)
Support bracket for inlet silencer
Skid complete with side protector frame
designed for your success
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991Email: [email protected] Website: www.rotaryvalverepair.com / www.acsvalves.com
Rebuild/Repair Rotary Airlock Valves
Before After
Ship us your rotary valves/airlocks in need of repair. We will arrange freight to and from your facility, adding the freight cost to the final invoice. We will assess the airlock and send a quote for repairs.
Repairs Extended Life Options ___
Disassembly and inspection
General Cleanup
Machine housing and endplates
Replace seals and bearings
Weld and/or machine rotor to original clearances
Replace rotor assembly
Repaint
Chrome coating interior bore and endplates
Tungsten Carbide coating
Add adjustable/replaceable mild steel/hardened
steel rotor tips to rotor
NEW AR rotor assembly
Stellite welded rotor tips *We repair all rotary valves including Meyer, Flowtronics, MAC, KICE, Smoot, Semco, Prater, K-Tron/ Premier, Rotolok, and of course, OUR OWN!
How To Ship To Us:
Call or email us, and we will arrange the shipment, send you the required paperwork, and have the valve picked up the next day!