1 - 8 0 0 - B U Y- R I V E T

RIVETKING®

SEMI-TUBULAR RIVETS (OVAL/TRUSS HEAD)

A B C D E L R CA

PART CODE

RIVET SIZE

BODY DIA HEAD DIA HEAD HEIGHT HOLE DIA DEPTH TO POINT LENGTH HEAD

RADIUSCLINCH

ALLOWANCE MIN. HOLE SIZEMAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. NOM. MAX.

B-1091/16

.061 .058 .114 .104 .019 .015 .044 .039 .057 .047

As Specifiedby User

.156 .032 .067

B-125 .061 .058 .130 .120 .019 .015 .044 .039 .057 .047 .125 .032 .067

F-147

3/32

.089 .085 .150 .140 .026 .020 .068 .062 .076 .066 .219 .045 .070

F-156 .089 .085 .160 .150 .026 .022 .068 .062 .076 .066 .219 .045 .070

G-187 .099 .095 .190 .180 .032 .026 .076 .070 .091 .080 .266 .055 .103

J-2181/8

.123 .119 .223 .213 .034 .030 .090 .084 .110 .100 .312 .062 .129

J-281 .123 .119 .286 .276 .045 .040 .090 .084 .110 .100 .375 .062 .129

M-234

9/64

.146 .141 .239 .229 .045 .040 .107 .100 .145 .135 .281 .093 .154

M-281 .146 .141 .286 .276 .045 .039 .107 .100 .145 .135 .380 .093 .154

M-312 .146 .141 .318 .306 .045 .040 .107 .100 .145 .135 .453 .093 .154

M-375 .146 .141 .381 .369 .065 .060 .107 .100 .145 .135 .516 .093 .154

N-312 5/32 .157 .152 .318 .306 .068 .058 .110 .103 .145 .135 .375 .093 .165

T-3123/16

.188 .182 .318 .306 .065 .060 .141 .134 .179 .169 .281 .110 .196

T-375 .188 .182 .381 .369 .065 .060 .141 .134 .179 .169 .203 .110 .196

U-437 7/32 .217 .210 .444 .430 .090 .085 .162 .154 .194 .184 .625 .156 .265

Y-4371/4

.252 .246 .444 .430 .090 .085 .184 .176 .247 .237 .625 .156 .265

Y-500 .252 .246 .507 .493 .090 .085 .184 .176 .247 .237 .719 .156 .265

V-437 9/32 .290 .280 .444 .430 .100 .090 .200 .190 .250 .240 spec .172 .296

Z-5005/16

.310 .302 .507 .493 .090 .085 .213 .206 .255 .245 spec .187 .325

Z-562 .310 .302 .570 .554 .100 .095 .213 .206 .255 .245 .690 .187 .325

W-5623/8

.377 .368 .570 .554 .100 .095 .286 .276 .287 .275 spec .218 .387

W-625 .377 .368 .632 .618 .125 .115 .286 .276 .287 .275 spec .218 .387

COMMONLY MANUFACTURED & STOCKED IN MATERIALS: STEEL, ALUMINUM, COPPER, BRASS PLATINGS: ZINC, NICKEL, ZNFE, ZNNI, COPPER FLASH, BRASS

RIVETKING® SEMI-TUBULAR RIVETS are manufactured in accordance with internal standards and coated with a proprietary wax to insure a smooth rollover and clinch of the assembly.

To calculate the rivet length, add the material thicknesses to be riveted to the maximum clinch allowance “CA”. The resulting value is the maximum allowed rivet length. Round off to the nearest 1/32” not exceeding the maximum allowed rivet length.

For more information consult the DESIGN CONSIDERATIONS section of our catalog.